Engineering Commons^™

Circular Polarization From A Corner Reflector Antenna With Tilted Dipole Of Arbitrary Length, Ruben A. Carrizo M.

Masters Theses

"The problem consists of the development of the electric far field equations for a forty-five degree corner reflector antenna with a tilted dipole, of arbitrary length, centered at the corner bisector plane to produce circularly-polarized radiation. The far field expression was developed as a function of the spherical coordinate system variables and placed in Fortran language in order to determine the dipole locations which would produce circularly-polarized radiation. At such dipole locations the field patterns were plotted in the [theta] = [pi]/2 and [phi] = 0.0 planes. Computations were made by the IBM 1620 digital computer"--Abstract, page ii.

Performance Of A Reciprocating Packed Extraction Column, Thomas Vardaman Konkle

Masters Theses

"The performance of a mechanically-aided liquid extraction column was investigated utilizing the methyl isobutyl ketone-acetic acid-water ternary extraction system. Mechanical power was added to the extraction system by reciprocating a wire-mesh packing of high void volume at various frequencies and displacements. The effects of total throughput on performance were studied in increments of 5,000 pounds per hour per square foot up to the onset of flooding, and the column performance was evaluated as a function of power addition to the extraction system. In comparing the various types of mechanically-aided extraction columns, it was determined that the throughputs achieved with the …

Piezometric Levels And Shallow Aquifers, Dillon And Meramec Spring Quadrangles, Missouri, James Hugh Crouch

Masters Theses

"Little is known about groundwater in carbonate rock; quantitative data about limestone and dolomite aquifers are almost non-existent. Objectives of this study are: identification of shallow aquifers, and yield, occurrence, and piezometric level of groundwater in cherty dolomitic rocks in eastern Phelps County, Missouri. Area studied comprises of the 7.5-minute Dillon and Meramec Spring Quadrangles. The data used were derived from water well logs, interviews with well drillers and owners, and a previously available geologic map.

The Jefferson City, Roubidoux, and Gasconade formations are aquifers. Groundwater in the Jefferson City formation is perched. West and north of Dry Fork creek, …

Temperature Distribution In Thermal Boundary Layers (In Free Convection) Using A Modified Schlieren Method, Philip Ling Chen

Masters Theses

"A simple optical apparatus, the Schlieren interferometer, was constructed for the quantitative investigation of free convection heat transfer from solid bodies. The photographic results, checked by using thermocouples, were used in evaluating the temperature distribution, the key to the solution of these problems. Interpretation of the photographic results was made using the simple calculation for the conventional interferogram and the Dale-Gladstone law. Although the experiments were limited to a heated flat plate and a heated wire, two dimensional test pieces of irregular configuration can be investigated by the same apparatus with simple modifications. The photographs of the conventional Schlieren, the …

A Study Of The Influence Of Shock Waves On The Stability Of Rock-Bolt Anchorage, Helmut W. Habenicht

Masters Theses

"An experimental method was developed to compare strain data for rock and rock bolts when exposed to shock waves released by blasting. During a 32-day period of experimentation, one rock sensor and four rock-bolt sensors were observed simultaneously. By their placement in the side wall of a structurally stable drift, secondary static stresses were excluded. Bolt gage responses, then, could be considered to originate only from a decay of anchorage stability during static conditions or as a reaction to the vibrations. Interpretation of test results indicated a distinct loss in bolt-strain during vibrations, accompanied by a smaller but steady loss …

Optimum Finite Memory Nonlinear Filter, Ching-Chyoun Yang

Masters Theses

"This thesis investigates the possibility of using the Zadah theory and a machine type computer to design an optimum finite memory nonlinear filter for extraction of Poisson distributed signal pulses from a background of Gaussian noise. Basically the procedure involves the technique of solving simultaneous equations by the computer. We demonstrate that it is possible to find the limitation of the filter of class N₁ in terms of an absolute minimum mean square error. However, due to the capacity of the computer we do not actually determine the absolute minimum. Nevertheless we do show that the mean square error decreases …

The Effect Of Nickel On Activated Sludge, James Robert Matthews

Masters Theses

"The primary objective of this investigation was to determine the effect of nickel on activated sludge over a comprehensive range of concentrations and to evaluate the ability of the sludge to acclimate and become more tolerant to the metal. Six one-liter fill and draw activated sludge units were fed domestic sewage; five of these units also received constant, increasing, and shock doses of nickel while the sixth was maintained as a control. Treatment efficiency was evaluated in terms of the chemical oxygen demand, suspended solids, and nickel content of the effluent. A Warburg respirometer was also employed and was operated …

Analog Computer Study Of Unequally Spaced Antenna Arrays, Fred M. Dickey

Masters Theses

"The problem undertaken in this thesis was to study the basic properties of unequally spaced antenna arrays. The study was done on a trial and error basis by simulating the expression for the far field pattern of a general array on an analog computer. Many patterns were obtained from the analog computer for the purpose of comparison. The patterns of two spacing schemes that are typical of unequally spaced arrays are presented for the purpose of illustration"--Abstract, page ii.

The Effect Of Submerged Jets On The Hydraulic Jump, Harvey E. Jobson

Masters Theses

"Tests were performed in order to determine the effects of forcing submerged jets of water into the base of a hydraulic jump. The specific energy of the water leaving the hydraulic jump, the length and the wave formation properties of the jump which had been modified by the introduction of submerged jets were determined and compared with the same characteristics of a normal hydraulic jump and a hydraulic jump which had been modified by the use of baffle piers.

Test results indicate: (a) the quantity of water flowing through the submerged jets is a primary factor in determining the specific …

The Development And Evaluation Of An Experimental Technique To Determine Stress Distribution In Uniformly Loaded Flat Plates, James William Walker

Masters Theses

"This thesis reports and evaluates an experimental technique that was developed to determine and monitor the stresses in a simply supported, uniformly loaded circular plate. Deflections are less than half the thickness of the plate. The application of the developed technique to plates whose integrity has been compromised with holes in various locations is discussed.

Resistance strain gages were used to determine experimentally the stresses in a simply supported, uniformly loaded circular plate with and without a concentric hole. The accuracy of the experimental results was established to be within approximately six percent of theoretical.

Proper application of the experimental …

The Dissolution Of Magnesium In Strong Acids And Neutral Solutions, Cheng-Ken Chi

Masters Theses

"The increasing demand for magnesium and magnesium- base alloys in the manufacture of aircraft has stimulated a great amount of research into the corrosion characteristics of these materials. The result of such research has been the development of suitable magnesium alloys and protective coatings to retard corrosion.

The basic mechanism of the anodic dissolution of metals such as magnesium, zinc, and cadmium in salt solutions is not completely known. Several schools of investigators have proposed different and opposing theories to explain the discrepancies which often arise between coulometer data and the weight loss of metal electrodes in certain salt solutions. …

Determination Of The Temperature Distribution Of The Ionized Portion Of The Jet From A Vortex Stabilized Plasma Generator Operating On Argon, G. Douglas Schellman

Masters Theses

"The interim thesis deals with the determination of the temperature distribution of a plasma jet operating on argon. It is the purpose of this thesis to present in detail the experimental process used and make a correlation of the experimental and theoretical results.

A copper enclosure was placed around the protruding flame, and the embedded thermocouple readings were taken and recorded. A stagnation temperature probe was inserted in the enclosure and moved both axially and transversely toward the flame taking readings at each pre-chosen interval. The exit temperature of the jet was obtained from a total energy balance.

From the …

The Design And Construction Of A Shock Tube Facility, William Adolph Crede

Masters Theses

"It is the object of this thesis to give an account of the considerations necessary to design, construct, and operate a shock tube facility.

The primary purpose of the facility was to provide a means to study high strength shock waves in physics, chemistry, and aerodynamic applications.

Preliminary designs were undertaken to determine the basic dimensions and related capabilities. Final design, construction and testing of the tube itself was performed by Nooter Corporation in St. Louis, Missouri. Preliminary designs agreed rather closely with final construction.

Experimental testing was confined to the successful operation of all the various components of the …

Turbulence In Journal Bearings, Kashyap R. Mehta

Masters Theses

"In this investigation, an experimental study was performed on a journal bearing under laminar and turbulent flow conditions. Using relationships for friction factor developed previously by other investigators a comparison was made with results of this present investigation. Since the flow changes from laminar to turbulent with a change in speed of rotation, curves for friction factor as a function of speed were plotted. Various attempts to make the recording and measuring systems more sensitive were also made and are discussed in this thesis"--Abstract, page ii.

Heat Transfer Coefficients Across Bonds And Contacts, Eugene Charles Fadler

Masters Theses

"The purpose of this investigation was to experimentally determine heat transfer coefficients across interfaces, including the effects of the thermal conductivity of the adherends, the hardness of the adherends, the bond thickness, and the type of adhesive.

Aluminum alloy, steel, copper, and extruded nylon rods were used as adherends; all 1.875 inches diameter and 8 inches long. Each was cut radially at its midpoint and faced off to the desired surface finish. Bare interface tests were conducted before the adherends were bonded together. The adhesives used were high grade silica refractory cement, two-part epoxy resin adhesive, and thermosetting synthetic rubber-phenolic …

Kinetics Of Base-Catalysed Reactions, Kunjvihari Ramanlal Mehta

Masters Theses

"The work of Wulfman on the mechanism of the Michael reactions suggests that the normal Michael reaction is second order kinetically, with the rate being proportional to the concentration of the acceptor and the active form of the addendum. A detailed reaction mechanism of normal Michael reaction was not proposed due to insufficient data which resulted from analytical difficulties. This investigation involves the study of the kinetics of normal Michael reaction from the stand point of base strength, solvent concentration and acidity of the reactants, solvent and products"--Experimental. A. Purpose of Investigation, page 17.

Infinite Beams On An Elastic Foundation, Shi-Peing Chang

Masters Theses

"In this paper a partial differential equation for the analysis of beams resting on an elastic foundation under dynamic load is presented. A solution for this equation is derived, and solutions for various boundary conditions of infinite beams resting on an elastic foundation are discussed. The application of the equation is demonstrated by an example of a moving load traveling along an infinite beam"--Abstract, page ii.

The Effect Of Small Alloy Additions On The Quench Induced Texture Of Alpha Uranium, Kenneth Ray Riggs

Masters Theses

"The preferential orientations produced in binary alloys of U-Si and U-Cr on plane sections perpendicular to the direction of heat flow by cooling from beta-phase temperatures were determined. The experimentally determined textures were presented using inverse pole figures. A definite and reproducible relationship was found to exist between the preferred orientation present at any position and the cooling rate which material at the position had experienced. It was found that the concentration of the alloying elements within the ranges studied had little detectable effect upon the observed relationship between the cooling rate and the resulting preferential orientation. It was postulated …

Effects Of Internal Pressure Upon The Buckling Of Thin Circular Cylindrical Shells Under Axial Compression, Leroy E. Thompson

Masters Theses

"An experimental investigation was made of the effects of internal pressure upon the buckling of thin circular cylindrical shells under axial compression. A comparison was made of the experimental and theoretical results; the latter were derived from the large-deflection theory. Results showed that the internal pressure had an appreciable strengthening effect upon the buckling of the cylindrical shell. The comparison showed that the experimental results were lower than the theoretical results for a given internal pressure. The discrepancy between the results can be expected since there were factors not included in the theory: imperfections, end conditions, lengths, and material irregularities"--Abstract, …

A Photoelastic Study Of The Effect Of Certain Geometric Variables On The Plane Stress Distribution In An Electrical Insulator Body, Richard L. Pendleton

Masters Theses

"Photoelastic models were used to indicate stress patterns in various geometrically designed shapes. Each model represented a two-dimensional cross-section of the interior portion of an axially symmetrical porcelain electrical insulator. Five different loading pins were combined with three loading heads to produce eleven models. The maximum stress in each model was determined using a photoelastic method of stress analysis. An attempt was made to select the best structural design to be used in an electrical insulator. The test results indicate that the most desirable stress distribution is obtained using a single step loading pin and that the loading head angle …

An Investigation Of Continuous Prestressed Concrete Structures, Ping-Chi Mao

Masters Theses

"This thesis presents an analysis of the behavior of continuous prestressed concrete structures. From this analysis the governing equations for various types of geometry for prestressing cables are derived. The calculation of fixed-end moments due to the prestressing force using the equations derived is quite cumbersome, however, in order to simplify the calculations, design charts are developed. A cable with reverse curvature is analyzed using the design charts. It is shown that the fixed-end moments calculated by neglecting the effect of reverse curvature differ significantly from the fixed-end moments calculated by considering this effect. Hence the effect of reverse curvature …

Epoxy Resin Admixture For Concrete, Kuo-Chu Hu

Masters Theses

"This thesis describes laboratory tests on concrete having epoxy as an admixture. Cylinders for compression and elastic modulus tests were cured under two different curing conditions, standard laboratory cure and a simulated job cure. Beams cured under laboratory conditions were tested for flexural strength. Test results show the compressive strength increases with an increase of epoxy content for job curing conditions. However, compressive and flexural strengths of specimens cured under laboratory conditions show a slight decrease. The elastic modulus of concrete containing epoxy also decreases in comparison to ordinary concrete"--Abstract, page ii.

Effect Of Single Stirrups On Reinforced Concrete Beams, Vinodbhai T. Patel

Masters Theses

"This study was made to determine the location of vertical stirrups and also to determine the amount of stirrup-steel required to prevent diagonal cracking. The study is limited to rectangular, simply supported, reinforced concrete beams subjected to a concentrated point load at the center of the span. Five sets, each containing three beams were tested. Two sets were cast without stirrups and the results were used to locate the stirrups for the remaining tests. The other three sets were cast with one stirrup on either side of the central load. Stirrups were of the "U" type and formed form No. …

The Design And Construction Of An Instrument For Calibrating Accelerometers, Richard Rabenau

Masters Theses

"The purpose of this work was to design and construct a facility to calibrate accelerometers. A ceramic piezoelectric shaker and modified Michelson interferometer together with necessary electronic equipment were used. The system produced accurate and stable acceleration at five discrete points from 1,000 to 5,000 cycles per second. the maximum calibration levels were approximately 50 g's"--Abstract, page ii.

Studies Of Volume Change In Expansive Cements, Thomas J. Aylward

JTRP Technical Reports

No abstract provided.

Application Of Statistical Quality Control Procedures To Production Of Highway Pavement Concrete : Progress Report, Steven John Hanna, A. P. Lott

JTRP Technical Reports

No abstract provided.

Evaluation Of Safety At Railroad Highway Grade Crossing, Thomas Gordon Schultz, Joseph C. Oppenlander

JTRP Technical Reports

No abstract provided.

Procedural Guide For Estimating Axle Loadings On A Statewide Basis, Roy Hilton Larson

JTRP Technical Reports

No abstract provided.

A Study Of The Mechanism Of Fatigue In Cement Paste And Plain Concrete, John Decourey Antrim

JTRP Technical Reports

No abstract provided.

Traffic Assignment By Systems Analysis, Wallice Alvin Mclaughlin

JTRP Technical Reports

No abstract provided.