Engineering Commons^™

Computer Simulation Of Unsteady Flow In An Alluvial Channel By The Method Of Characteristics, Dennis Lynn Richards

Electronic Theses and Dissertations

A number of dams have been constructed along alluvial rivers. These dams create reservoirs which serve to collect and store water, usually in large quantity, for use in supplying municipal needs, for supplying power and driving machinery, for furnishing irrigation, and for retaining the flow in time of floods. The characteristics of flow and the sediment-transport capacity of the channel change after these dams have been constructed. One of the major problems then confronting the hydraulic engineer is the rate of reservoir sedimentation and the change in river configuration. A problem of concern is the rapidity of reservoir sedimentation and …

Faulty Germination Of Lupin Seeds, B J. Quinlivan

Journal of the Department of Agriculture, Western Australia, Series 4

THE number of lupin seed samples tested in the seed laboratory over the last few years has shown a marked increase with the increasing popularity of lupins as a cash crop.

A seed with satisfactory germination is one which produces a healthy seedling. The germination of lupin samples tested in the laboratory has varied markedly.

History Of Utah's Salt Industry 1847-1970, John L. Clark

Theses and Dissertations

Utah salt makers have extracted salt from three sources, the principal of these being brine from Great Salt Lake. Other sources are saline beds in Great Salt Lake Desert and subterranean halite formations in central Utah.

This study traces the development of methods used to recover and refine salt by the industry, in general, and by specific companies. It provides brief, historical sketches of the major corporations and the economic, legal, and environmental factors affecting their growth.

Utah produces about 1 per cent of the nation's salt, exporting over half of it from the state. The major factors limiting the …

Farm Dams In High Rainfall Areas, G C. Brown

Journal of the Department of Agriculture, Western Australia, Series 4

WATER storage is essential on most south-west farms to ensure adequate irrigation supplies in the dry summers. Government irrigation water supply schemes are limited and most farmers must supply their own water storage.

Land Levelling With Scrapers, K R. Southon

Journal of the Department of Agriculture, Western Australia, Series 4

A VARIETY of earth-moving equipment can be used in preparing land for flood irrigation, but the best machine for extensive earth moving over some distance is a power-driven, carry-all scraper.

Rapeseed. 5. Harvesting Methods, M L. Poole

Journal of the Department of Agriculture, Western Australia, Series 4

IN Western Australia the warm dry spring and early summer allows rapeseed to be direct harvested when mature, whereas in most rapeseed-producing countries the crop must be swathed, allowed to mature in the windrow, and harvested with a pick-up combine.

Effects Of Molecular Characteristics Of Polymers On Drag Reduction, Gin‐Chain ‐C Liaw, Jacques L. Zakin, Gary Kent Patterson

Chemical and Biochemical Engineering Faculty Research & Creative Works

Turbulent measurements in capillary tubes and in pipes were made on nonpolar solutions of seven polymer species, three at more than one molecular weight, over wide concentration ranges. A critical concentration, Cc, was taken as the minimum concentration for disappearance of the turbulence transition region. Above this concentration, friction factor‐generalized Reynolds number data show only a gradual deviation from extension of the laminar line. Cc increases with tube diameter and decreases with molecular weight. The critical dimensionless volume friction Cc [η] is less dependent on molecular weight. The levels of Cc [η] for different polymer species in a given tube …

Experimental Investigation Of Shock Boundary Layer Interaction For Two-Dimensional And Axisymmetric Flow, A. Shawki Zahran

Electronic Theses and Dissertations

A supersonic wind-tunnel has been constructed using an 8 inch by 10 inch single stage jet vacuum ejector with a capacity of handling 0.4 lb/sec air at 4 inches Hg absolute suction pressure. A Toepler Schlieren system with 10-inch diameter parabolic mirrors has been set up for flow pattern visualization. The same apparatus was developed to obtain multi-colored views of the flow pattern. That was accomplished by placing an equilateral prism in front of the light source located at the focal plane of the first parabolic mirror. A spectrum was thus produced at the focal plane of the second parabolic …

Screening Electrocardiograms Using Hotelling's Method Of Principle Components, Edward G. Schwartz

Electronic Theses and Dissertations

Considerable use is presently being made of computers to classify electrocardiograms (ECGs) into various heart defect categories. An example of such a program is the "Electrocardiographic Analysis Program" developed jointly by the Mayo Clinic and IBM. In one of Dr. Caceres published reports, he tells of using a computer program which involves 5,000 instructions. Dr. Caceres does not say whether this is a commercial program or one of bis own. His description does place this program in the same general category as IBM's. These programs have the common criteria of examining the ECG for the same information that a cardiologist …

Operational Effects Of Auto-Utility Trailer Combinations On Rural Highways In Kentucky, Bruce S. Siria

Kentucky Transportation Center Research Report

An analysis of accident records indicated that A-UT combinations are involved in a disproportionately high number of traffic mishaps. Locations which have a history of accidents involving A-UT vehicles indicated that differential crosswinds and unanticipated driving maneuvers contribute to driver loss of control. A-UT combinations contributed to the fatigue loss in pavement life approximately 50 percent as much as single-unit, two-axle, six-tire trucks (per vehicle). In general, this vehicle type constituted approximately three percent of the total traffic stream. Analysis of speed distributions indicated an equivalency factor for A-UT combinations equal to that for trucks for similar roadway types and …

An Evaluation Of An Aerated Lagoon System Treating Combined Dairy And Domestic Wastes During Summer Operation, Douglas M. Skie

Electronic Theses and Dissertations

The Water Quality Act of 1965 and the adoption of the subsequent state water quality standards emphasized the general public's concern for the control of water pollution; for it has become the goal of our nation to maintain all American waters in a suitable condition for domestic and industrial supply, for recreation and for other beneficial uses. It is for these reasons that many communities have been faced with the problem of constructing new sewage treatment facilities or expanding present operations. The use of stabilization ponds as a means of providing sewage treatment has been the practice of many small …

Further Studies Of The Optimum Operation Of Desalting Plants As A Supplemental Source Of Firm Yield, Calvin G. Clyde, Wesley H. Blood

Reports

The Operating Rule Program was developed in an earlier study to furnish a means to determine optimum desalting plant size, optimal operating rule, and costs of operating in conjunction with existing water supply systems, under the present study, five further objectives were accomplished: (1) The program was applied to a New York City water supply system feasibility study in connection with a dual purpose nuclear power plant to develop costs for adding firm yield to the New York City water supply system in conjunctive operation with the desalting plant. (2) The program was modified to enable assessment of stage construction …

Establishment Of Wood Plants On Roadsides (Southeastern Kentucky), Samuel E. Whitaker

Kentucky Transportation Center Research Report

Recommendations for woody plant materials to be used in direct seeding are given on the basis of the plant's ability to regenerate from roots and natural seedings. Species are recommended for each of the relief and drainage subdivisions of the study area, southeastern Kentucky. Plant information on recommended native species has been summarized to provide basic data relevant to or needed by the highway landscape designer in selecting native plant combinations to be used in direct seeding.

Test 1069: Minneapolis-Moline G-1350 Diesel (Also Oliver 2155 Diesel) 10-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1071: Kubota L-210 Diesel 6-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1078: Case 970 Manual Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 1081: International Farmall 1066 Turbo Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT

GENERAL CONDITIONS

East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers.

PREPARATION FOR PERFORMANCE RUNS

The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Interactions Between Selected Pigment Producing Bacteria Isolated From Sewage, Leslie Alexander Lakie

Masters Theses

"Pigmented bacteria have been of interest to the microbiologist for several years. The pigmented organisms in sewage have been known to gain predominance, but no investigations have been made to determine whether the pigment assists the organism in gaining predominance. During this study a number of bacteria which produced a water soluble pigment were isolated from sewage. These bacteria were grown in shaken flasks using tryptone Glucose extract broth as a medium. Growth studies of the bacteria in pure and mixed culture were performed to determine if the pigment could affect another bacteria's growth. Studies were also performed using the …

A Laboratory Study Of The Transmission Of Signals Through Solid Material With Possible Application To Seismic Communication, Ronald Willis Carter

Masters Theses

"The problem of transmitting acoustic signals through solid material channels is investigated using piezoelectric transducers for generation and detection of the signals. Laboratory experiments are performed in which a solid material channel is modeled by a block of Berea sandstone. The magnitude of the frequency response for the sandstone and transducer combination is obtained over the frequency range of approximately 0 Hz to 500 kHz. Various electrical waveforms are utilized as driving sources for the transmitting transducer. It is found that the best received waveform is obtained when a gated sinewave whose frequency is approximately equal to the resonant frequency …

A Hybrid Computer Solution Of The Swing Equation, Donald Wayne Shaw

Masters Theses

"Models for the governor and exciter control systems are presented and the development of a hybrid computing system including these models is described. A technique for including the governor and exciter effects into the solution of the power system swing equation is also discussed. A hybrid computing system consisting of an SCC 650 digital computer, hybrid interface, and an EAI-TR-48 analog computer is used to study five test cases. The test cases involve basically the same example system with different values for fault clearing times and machine inertias. The results of each test case are briefly discussed with relevance to …

The Concept And Design Of A Curvilinear Character Generator For Cathode Ray Tube Display Systems, Lawrence Edward Hanebrink Jr.

Masters Theses

"The character generator is the heart of any cathode ray tube display system. The types of generators in common use are the dot matrix generator, the raster scan generator, and the linear stroke generator. Each of these generators produces symbols whose legibility is somewhat compromised. A curvilinear generator is suggested which provides improved appearance and greater legibility. A prototype unit was constructed and the results are compared with the other generators. The curvilinear generator provides the best character resolution and readability of the generator types discussed"--Abstract, page ii.

Advanced Waste Treatment Of Industrial Waste Waters By Physicochemical Processes, Michael Gay Hardie

Masters Theses

"The primary objective of this investigation was to determine the general applicability of using physicochemical processes for treating different types of industrial wastes. Emphasis was placed on the evaluation of the treatment efficiency and the performance difficulties encountered in the treatment of each waste. Two types of waste were studied, one a high strength acidic industrial chemical waste and the other a petroleum refinery waste. The physicochemical system utilized included chemical coagulation and clarification plus activated carbon adsorption. Parallel operations of fixed-bed and expanded-bed carbon adsorbers were conducted. Treatment efficiencies were evaluated in terms of the removals of chemical oxygen …

The Skid Resistance Of Asphaltic Pavements Using Glass Aggregates, Michael Vaughn Korth

Masters Theses

"The disposal of the glass portion of solid waste is an ever-growing problem in the U.S. and recycling has been suggested as a possible solution. In order to find new uses for waste glass, investigations have been conducted to determine if the glass could be used as an aggregate in bituminous concrete mixtures. As part of the overall investigation, this study was concerned with investigating the skid resistance properties of the glass aggregate mixtures, called glasphalt. The objectives were to compare the skid resistance of various bituminous mixtures using aggregate combinations ranging from all glass to all conventional aggregate and …

High Temperature Compressive Creep In Mullite, Peter C. Smith

Masters Theses

"Compressive creep measurements were made on two groups of mullites at temperatures between 1455ºC and 1520ºC. The first group consisted of commercially manufactured mullites. The second group was made up of 7 different mullite compositions spanning the alumina-silica solid solution range from 3Al₂O₃ • 2SiO₂ to 2Al₂O₃ • SiO₂ . Thermal activation energies and stress exponents were calculated for the mullites in the second group. Steady state strain rates taken at 1460ºC under loads of 100 and 110 psi varied between 1.3x10⁻⁴ in/in/hr and 15.4x10⁻⁴ in/in/hr. Activation energies were between 109 Kcal/mole and 204 Kcal/mole. Stress exponents calculated from data …

A Software System For Interactive Man-Machine Design And Analysis Of Electronic Circuits, Leo William Midden

Masters Theses

"The development of an interactive computer-aided circuit analysis program is presented. A graphics terminal is used as an I/O device while an SCC 650 mini-computer is used as peripheral processor. The central processor is an IBM 360/50.

Formulation, capabilities and use of the system are discussed in detail. Close attention is given to user control, making the system both useful and versatile. Both hard and soft copies of all plots and tabular data are available. Provisions are made for error corrections and changes at each step of the input. Parameter values can be altered before and after each analysis.

Additionally, …

A Study Of Early-Late Type S0-Pcm Signal Bit Synchronizers, Kuang-Cheng Hu

Masters Theses

"The steady-state phase noise performances of an absolute value type and a squaring loop type of early-late gate S0-PCM signal bit synchronizers are developed using the Fokker-Planck method. The results are compared on the basis of the performance of two configurations with equal loop bandwidth at each input signal-to-noise ratio R_s. The probabilities of bit-detection error of the two configurations are compared. These comparisons are made as a function of R_s. The absolute value type of early-late gate S0-PCM signal bit synchronizater yields better performance than that of the squaring loop type of early-late gate S0-PCM …

Reservoir Design: Simulation Techniques, Larry W. Mays

Masters Theses

"A simulation model is developed to aid in the analysis of small dams to reduce the possibility of inadequate spillway designs. Basic assumptions concerning the geometric aspects of the natural reservoir are made to develop the model which is based upon describing the timing and magnitude of a design flood passing through a reservoir. Simulation equations are derived from the basic continuity equation and describe reservoir outflow and storage as functions of reservoir depth. Newton's Iteration Technique is utilized to solve the simulation equations for the reservoir depth. The resulting simulation model determines an optimum size auxiliary spillway having a …

Factors Affecting The Ductility And Microstructure Of Ti-6al-6v-2sn Titanium Alloy Weldments, Michael John Ball

Masters Theses

"The purpose of the investigation was to study the effect of material thickness, weld heat input and post weld heat treatment on the tensile properties and microstructure of Ti-6Al-6V-2Sn Titanium, and obtain a practical weld/thermal treatment cycle. The objectives were accomplished by electron beam and gas tungsten arc welding 0.060, 0.125 and 0.250 inch thick material and then heat treating at various temperatures and times. Electron beam and gas tungsten arc welding enabled an approximate 4:1 ratio of heat inputs to be utilized. Resultant welded and heat treated material was tensile tested and metallographically examined. Heat treatments involved both air …

A Step-Wise Gray Approximation Of The Radiative Absorption Coefficient For An Isothermal Hydrogen Plasma, Keith Harlan Browne

Masters Theses

"The radiative absorption coefficient of an isothermal hydrogen plasma is calculated using a step-wise gray approximation. The approximation retains a high degree of accuracy while significantly reducing the numerical computer time. The accuracy of the approximation depends on the spacing of the steps taken in the frequency spectrum as well as the number or steps used; 135 steps are used in this study. Plasma conditions of interest in this study are for temperatures between 5000 and 60,000ºK, densities between 10⁻⁵ and 10⁻⁷ gm/cm³, and thicknesses between 0.1 and 100 cm. Flux and intensity calculations are made for each case using …

A Computerized Decision Model For Making Quantitative Decisions With Regards To The Department Of Army's Equipment Improvement Recommendations, Lewis Neri

Masters Theses

"The management decision technique, currently in use, of determining priority of EIR evaluation is basically that of "feel and experience" along with the "most pressure" applied from outside the responsible organization. The feasibility of a computerized management decision concept has been studied at the lowest system with the objective of applying this to the next higher systems and finally arriving at an overall system value to obtain system priority. This study develops the technology of operations research and the associated computer techniques, delineates the problem and develops a mathematical model to simulate this management decision technique. Furthermore, it utilizes logical …