Engineering Commons^™

2.5 Ampere Dc Solid State Power Controller, John Anthony Gilbert

Masters Theses

"The 2.5 Ampere DC Power Controller presented in this paper is a device which combines the properties of both relays and circuit breakers solely by means of solid state circuitry to perform the power functions that (1) provide DC power to electrical loads by means of power transistor switching, and (2) provide electrical protection by generating trip out characteristics similar to those of thermal circuit breakers. Furthermore, the control of this device is completely computer compatible, i.e., it is commandable from digital logic levels.

The text of this report discusses the requirements, specifications, and design of this power controller. In …

A Comparative Analysis Of The Capabilities Of Three Stereo Radar Techniques When Operating In The Presence Of System Errors, George L. Bair

Masters Theses

"Three stereo radar techniques for producing stereo images from which topographic data and maps may be obtained are described and their performance in the presence of system errors is determined. The techniques are: an improved single flight technique which uses a combination of two antenna beam characteristics which permits terrain illumination from nearly the same aircraft position, a previously proposed single flight technique which uses two horizontal linear arrays generating vertical fan beams at different azimuth angles, and an existing two flight technique which uses a horizontal array generating a side-looking fan beam.

Error analyses are performed to determine the …

A Computerized Simulation Of A Personal Rapid Transit System., James Richard Cromer

Masters Theses

"The movement of people from an origin to a destination has become a complex and sometimes severe problem, The present modes of transportation available, which include the rapid rail systems, bus transit service, and the personal automobile, have proven quite ineffective in dealing with the situation, A new concept in the transportation area is that of Personal Rapid Transit (PRT). This concept offers a promising solution to many of our people and goods movement difficulties. Before this new system can be implemented it is necessary that various design, construction, and operational criteria be evaluated to determine the optimal system to …

Design And Operation Of A System For The Measurement And Display Of A Railroad Train Length., Paul Clement Kriegshauser

Masters Theses

"This thesis describes the design, operation, and application of a system for the automatic measurement of a railroad train length. The system is based on sensing individual wheel crossings with two commercial variable-reluctance wheel sensors. The individual wheels are not counted as they are sensed, instead the system uses the information to compute the train velocity. These sensors are separated a known distance on the railroad track at the location a length measurement is desired. The train may pass these sensors at any desired speed and in either direction. The developed system is not dependent on car length or number …

Studies On The Yield And Rate Of Lysine Production Using Brevibacterium Lactofermentum., Ho Bao Nhan

Masters Theses

"The production of lysine by a microbial method was studied. Brevibacterium lactofermentum (ATCC 21086) was used to accumulate lysine. T1\ese experiments were done in shake flasks and a 7.5-liter fermentor.

Lysine and residual glucose were determined at fixed intervals of time during each run. Cell counts were also made for some experiments. Temperature and pH were kept constant during the runs and dissolved oxygen was recorded continuously.

The effects of casamino acid, soy peptone, certain amino acids, glucose and agitation on the rate of production and the yield were studied. It appears that reducing any one of the variables will …

Study Of Techniques For Designing Large Digital Systems Interactively., Harold Dale Puls

Masters Theses

"FLOWWARE [1-4] is an interactive register transfer language based upon the concept of flowcharting. The graphic nature of the language, however, generates a few disadvantages when it is used on a large design. Changes have been made to the basic FLOWWARE package to aid the user in specifying and displaying his design. In addition, responsibility for the design has been shifted to the remote large computer to lessen the size requirement on the local minicomputer"--Abstract, p. ii

A Training Simulation For Rural Electric Cooperative Staff., David F. Larcker

Masters Theses

"The simulation described in this thesis can be applied as a training tool to teach the management personnel of rural electric cooperatives the elements of decision making in a dynamically interreacting business environment. Initially, the major managerial problem areas of a typical rural electric cooperative were identified. These stimulated the development of a training simulation which realistically embodied the alternatives available to management personnel during the various stages of decision making. The final simulation design was a board type of game able to provide the feedback necessary for a learning experience" -- Abstract, p. ii

Deformation Of A System Of Clamped Thin Circular Plates With Liquid Filled Interspace., Archie Forrest Gatrost

Masters Theses

"In this work the behavior of a system of thin, circular clamped plates with liquid-filled interspace in a variable pressure environment was investigated. Six plates separated by liquid-filled chambers were arranged in alternate layers in a clamping device and a pressure was applied on one side of the six plate system. The deformation of each plate and the pressure distribution from the high pressure to low i i pressure side was measured. The plate deformation was measured by a strain gage attached at the apex of each plate and the chamber pressure by a strain gage pressure transducer.

The results …

Experimental Determination Of Improved Aerodynamic Characteristics Utilizing Biplane Wing Configurations, Elmer Carl Olson

Masters Theses

"Improving the aerodynamic characteristics of an airplane with respect to a higher lift coefficient, a lower drag coefficient and a higher lift over drag ratio as a function of angle of attack will make it more efficient, thus conserving energy or improving performance. Investigations were carried out to determine if the aerodynamic characteristics of biplane wing systems could be made more efficient, for low subsonic speeds, than a monoplane of comparable area and aspect ratio. A variable position three-dimensional biplane wing system, and a fuselage that could be fitted with a monoplane wing or the variable position biplane wing system …

Relative Performance Of Two Activated Carbons In Treating Pharmaceutical Waste., K. A. Narasimhan

Masters Theses

"This work examined the feasibility of the carbon adsorption system to treat a high organic strength waste (having a COD of 8,100 mg/£) from a pharmaceutical plant, and also compared the relative treatment efficiencies of two different kinds of carbon~ Calgon Filtrasorb 400 and Darco S-51, both having the same size ranges.

The overall treatment scheme employed consisted of chemical clarification and activated carbon adsorption. Jar tests were conducted to select a proper type of coagulant and determine an optimum dosage. Batch and column adsorption studies were conducted using both carbons.

Alum was found to be a better coagulant than …

Predicting Natural Frequencies Of A Hydrodynamically Lubricated Journal Bearing With Constant Oil Supply Pressure., Dennis Charles Edwards

Masters Theses

"The analytical and experimental investigations presented here determined natural frequencies and system behavior of a full journal bearing loaded dynamically and with oil supply pressure held constant.

The analysis showed that the bearing could be viewed as two independent second-order systems acting perpendicular to each other. This yielded an underdamped bearing for ε_O < 0.5747 and an overdamped bearing for 0.655 < ε_O < 0.675. The analysis also showed the bearing to be unstable beyond ε_O = 0.675.

The analysis, however, is limited to a full journal bearing with an oil supply pressure of 20 psig. and therefore, various supply pressures should be tested to yield an overall analysis"- Abstract, p. ii

A Planning Study On The Electrical Load Requirement For The New Town Of Pattonsburg, Javad Yousefian

Masters Theses

"Because of an Army Corps of Engineer proposed new dam on the Grand River 1 the original town of Pattonsburg, Missouri was to be inundated by the resulting lake reservoir formed above the dam. The city planners proposed the relocation of the town site adjacent to the new lake, forming a lake side community attractive to both a residential population and for industrial locations.

The electrical power loads of New Pattonsburg's residential, industrial, commercial, and municipal areas, as well as its street lighting power requirements, were planned for a population of 50,000. Statistical analysis of demographic surveys was employed to …

Magnetostrictive Aftereffects In A Dilute 50fe-50ni-C Alloy, Raj N. Master

Masters Theses

"Crystallographically equivalent interstitial sites are energetically equivalent when the host crystal is free of any fields. This situation is shown in Fig. Pl from which it may be appreciated that the difference of the free energy of the "crystal" with an interstitial "I" located in "x" and "y" sites, respectively, is equal to zero. This energy equivalence of the various interstitial sites is destroyed when the host crystal is subjected to fields such as strain fields, magnetization fields or a combination of both as may be appreciated from Figs. P2 through P4. In this case, the interstitials will preferentially occupy …

Flow Field And Heat Transfer For Developing Flow Of Molten Glass In A Duct, Russell Ralph Beckmeyer

Masters Theses

"The molten glass flow (temperature range 1300 to 1500°C) in the entrance region of a duct was investigated with numerical methods. The mathematical model was restricted by assuming: (1) two dimensional, steady state, (2) Newtonian fluid, variable viscosity, and (3) Rosseland approximation. In addition, appropriate use was made of the fact that the Reynolds number is small and the Eckert number is very small. The inclusion of temperature dependent viscosity and a Rosseland approximation for radiation produced from the mass, momentum, and energy equations a system of coupled, nonlinear, partial differential equations which were solved by an iterative finite difference …

Distribution Of Ambient Particulates And Particulate Trace Metals Around The Amax Smelter, Pramod Maneklal Shah

Masters Theses

"The purpose of this investigation was to study the distribution of metallic particulates in the air surrounding the AMAX Lead Company of Missouri smelter in the "New Lead Belt" of southeast Missouri. The study included the evaluation of the temporal and spatial variation of dustfall and deposition rates of settleable particulate lead, zinc, copper, and cadmium, and transport and distribution of total suspended particulates and suspended particulate trace metals.

The study was conducted within a 3 x 3-mile grid around the smelter employing twenty dustfall stations and five HiVolurne samplers. The samples collected were analyzed for lead, zinc, copper and …

Study Of The Return-On-Investment Surface Of A Small Chemical Plant, Jose Antonio Casas Martinez-Ortiz

Masters Theses

"A study of the return-on-investment (ROI) surfaces for a single reactor chemical plant (Westbrook (8)) with a discontinuous investment function confirms its unimodality in the valid region. In both cases studied, the return-on-investment surfaces rise smoothly to the adiabatic boundary from a singular flow rate below which two of the component flow are not physically realizable. The optimum is located on the adiabatic boundary.

Comparison with these surfaces shows that using linear regression to obtain the parameters for an algebraic simulation of investment does not yield ROI values acceptably near the optimal. However, an heuristic approach, which assumes that minimizing …

Electrical Cable Design And Applications, Robert William Buente

Masters Theses

"The materials available for constructing various electrical cables are discussed, along with remarks/ pertaining to the attributes and limitations of each. The installation and maintenance considerations are discussed in detail. Electrical considerations involved with designing a cable system are outlined with references to their specific application. Special cable constructions, their applications, and their typical modes of installation are reviewed. The conclusion explains an overall cable system design approach along with miscellaneous information"--Abstract, page ii.

Transformer Connection Study For 138 Kv To 12.47 Kv Substations Of The Union Electric Company St. Louis, Missouri, John Glenn Walsh

Masters Theses

"This thesis examines the transformer connections that can be used in the new 138-12.47 kV substations on the Union Electric power system. The object is to determine if a zero phase shift transformer without a delta connected tertiary winding can be used and economically justified. Traditionally a delta winding has been automatically included for this application without taking engineering time and effort to study all ramifications including possible dollar savings available with other connections. Three transformer manufacturers supplied technical and cost data which are analyzed, based on Union Electric system conditions. Consideration of relaying, harmonics and unbalanced loading shows that …

Determination Of Oxygen Chemical Diffusion Coefficients In Single Crystal Strontium Titanate By Capacitance Manometry, Douglas Bugh Schwarz

Masters Theses

"The use of the tensi-volumetric apparatus to study the non-stoichiometric behavior of strontium titanate was discussed. Oxidation kinetics of reduced single crystal strontium titanate were measured with an ultrasensitive capacitance manometer as the sample absorbed oxygen in response to a changing oxygen activity.

The oxidation kinetics were found to fit a solution to Fick's second law for rectangularly shaped samples....

The procedure selected for measurement of the oxidation kinetics, and the method of obtaining diffusion coefficients from the oxidation data was discussed along with potential sources of error of the system"--Abstract, page ii.

The Gyratory Testing Machine As A Design Tool And As An Instrument For Bituminous Mixture Evaluation : Draft Copy, Arun Kumar, William Harner Goetz

JTRP Technical Reports

No abstract provided.

Wrong-Way Movements On Divided Highways, Peter N. Scifres

JTRP Technical Reports

No abstract provided.

Engineering Soils Map Of Delaware County, Indiana, D. G. Shurig

JTRP Technical Reports

No abstract provided.

Effects Of Bicycle Lanes On Traffic Flow, Robert J. Jilla

JTRP Technical Reports

No abstract provided.

Soil Stabilization For Erosion Control : Interim Report, Sidney Diamond, Mitsunori Kawamura

JTRP Technical Reports

No abstract provided.

Destination Choice Modelling And Disaggregate Analysis Of Urban Travel Behavior : Executive Summary, Joseph Addo Ansah

JTRP Technical Reports

No abstract provided.

Rtor: Warrants And Benefits, Ronald L. May

JTRP Technical Reports

No abstract provided.

A Recommended Procedure For The Determination Of Dynamic Modulus Of Asphalt Mixtures : Technical Paper, Larry L. Yeager, Leonard E. Wood

JTRP Technical Reports

No abstract provided.

Prediction Of Long Term Deformation Of A Compacted Cohesive Soil Embankment Over A Soft Foundation, Yon-Nein Chen

JTRP Technical Reports

No abstract provided.

The Effect Of Commercial Vehicles On Intersection Capacity And Delay, Thomas H. Yurysta

JTRP Technical Reports

No abstract provided.

Destination Choice Modelling And Disaggregate Analysis Of Urban Travel Behavior, Joseph Addo Ansah

JTRP Technical Reports

No abstract provided.