Engineering Commons^™

Oil Spill Containment And Removal In Arctic Ecosystems, Wilfred R. Mcleod, Diana L. Mcleod

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Statistics on 16 arctic and subarctic oil spills, their locations, the amount of oil spilled, combatant schemes used, and causes for the spills were culled from the literature. This information has been used to analyze the effectiveness of available chemical, mechanical, and destructive means of oil recovery or disposal under arctic and subarctic conditions.

The choice of the best cleanup procedures to follow in any particular instance is clouded by a number of variables and must be weighed against such considerations as wind, sea, and ice conditions, properties of the oil, and effects of chemicals on marine and wildlife. Access …

Development Of The Solid Waste Resource, David L. Klumb, Earl M. Wells

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper describes the waste processing and boiler feed facilities which serve as the prototype for Union Electric Company's proposed Solid Waste Utilization System for recycling essentially all the solid waste generated in the metropolitan St. Louis area. The recently announced system, capable of processing up to 8,000 tons of raw refuse per day and estimated to cost $70 million, will be built and operated without government subsidy. Solid waste will be processed for the recovery of recyclable non- combustibles and use as a supplementary fuel to electric utility boilers.

An Environmental And Energy Information System, G. U. Ulrikson, M. P. Guthrie, G. M. Caton, H. F. Mcduffie

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The Environmental Information System Office (EISO) at Oak Ridge National Laboratory (ORNL) provides information support for researchers and administrators involved with energy and environmental policy and progress. Multiple EISO activities for various governmental agencies have resulted in establishment of compatible data bases concerned with energy and environmental information, methods for effectively developing these, development and computer display of numerical data summaries, and reports evaluating published information. Direction is provided by continuing dialogue between users and information system staff.

Mini-Computer Control Of Electrical Energy Demand, Thomas P. Hertel

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Electrical power demand control results in huge dollar savings for the medium to large user. Meramec Mining Company realizes an average $4,500.00 savings from an average $150,000.00 monthly charge because of demand control efforts.

This paper discusses the planning, designing, implementing, and auditing of the mini-computer system at Meramec Mining Company. No detailed discussion of the actual computer coding is included.

Ua64/3 Readout, Wku Industrial Education & Technology

WKU Administration Documents

Newsletter includes the following articles:

• Environmental Science & Technology Building
• Redrup, Donald. A Philosophy of Industrial Arts - ?
• Conley, Franklin. A Comment, re: energy crisis
• Bywaters, Gary. Student vs Faculty Sports
• Redrup, Donald. Department Possesses EDM Capability
• Craftsman and Guitar Genuis Speaks, re: Hascal haile
• Bochan, John. Computer Controlled Machinery at WKU
• Bywaters, Gary. Western Wins at KIEA
• Mr. Walter Nalbach Honored.

Bulletin No 3883 - Dairying In W.A., Western Australian Department Of Agriculture

Bulletins - 3000 - 3999

Western Australia has a small dairy industry compared with its other rural production. However, the industry has consolidated over recent years.

Tree clearing and pasture development on existing holdings and the amalgamation of small dairy farms has led to a rapid increase in the area of pasture per farm. The trend in Western Australia is towards bigger herds, more efficient dairies, more fodder conservation and increasing production per cow and per· hectare.

Loads On Box Culverts Under High Embankments, Harry F. Girdler

Kentucky Transportation Center Research Report

The structural design of culverts requires a reliable estimate of the earth pressures which will come to bear on the structure during and after construction of the embankment. The actual bearing pressure at a given time and under various conditions of differential settlement may be greater or less than the deadload of the fill or embankment over the structure. This report describes the instrumentation and construction of three box culverts designed by the imperfect trench method. A total of 42 Carlson earth pressure cells were installed in conjunction with strain gages and settlement measuring devices, including inverted settlement plates and …

Relationships Between Roadway Geometrics And Accidents (An Analysis Of Kentucky Records), Kenneth R. Agent

Kentucky Transportation Center Research Report

Statewide average and critical rates of accidents were determined from 1970-1972 Kentucky accident records for each type of rural highway. Four-lane undivided highways had the highest average accident rate; parkways (toll roads) had the lowest rate. The severity of accidents was related to types of accidents, highways, and traffic control and to safety belt usage. Accidents involving pedestrians were the most severe types; single-vehicle accidents ranked next highest in severity. Excluding accidents at railroad crossings, accidents which occurred on curves had the highest severity index. The use of safety belts was associated with reduced severity.

Multiregional Interactions Between Energy And Transportation, Karen R. Polenske

Applications

Because of the number and complexity of the issues that will determine the use of coal by the electric-generating plants, an important asset of policy makers will be the availability of a method of analysis that allows for quick studies of many different combinations of assumptions and policies. The present prototype study is designed to show how the multiregional input-output model can be used to investigate each different assumption and policy alternative. For this paper, the analysis has necessarily been restricted to two issues. First, the results of using regional rather than national technologies in the model are assessed. This …

Output Properties Of Short-Pulse Gain-Switched Lasers, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

A formalism is derived for analyzing the spectral and temporal properties of gain-switched lasers. The development of the longitudinal mode structure from spontaneous emission, limiting linewidths, and over-all spectral characteristics are considered in detail; and applications are discussed.

Diffusion Coefficients Of N-Heptane And N-Decane In N-Alkanes And N-Alcohols At Several Temperatures, James W. Moore, Robert M. Wellek

Chemical and Biochemical Engineering Faculty Research & Creative Works

The diffusion coefficients of the solutes n-heptane and n-decane were measured in the series of alkane solvents n-hexane through n-decane and in the alcohol solvents n-hexanol and n-heptanol. Mutual and self-diffusivities in most cases were measured at the temperatures of 20°, 25°, 30°, and 40°C. Concentrations of the diffusion species were in the infinitely dilute region. An unsteady state porous frit technique was used with carbon-14 tagged diffusion species. The diffusion coefficients measured were compared with various liquid diffusivity prediction correlations. © 1974, American Chemical Society. All rights reserved.

A Finite Element Analysis Of Unsymmetrically Laminated Rectangular Plates, Stanley F. C. Tseng

Mechanical & Aerospace Engineering Theses & Dissertations

The behavior of laminated plates with coupled extension-bending was investigated using the finite element method. A stiffness matrix for a rectangular element with 20 degrees of freedom was developed using a symbolic mathematics interpreter program. A finite element analysis program was written for the analysis of flat plate. Results i for plate deformations and internal moment distributions are compared with existing exact solutions or experimental data and excellent agreement is obtained.

The Design And Performance Of A Fiber Optic Pressure Transducer, Raymond Henry Pahler Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

Design and performance characteristics of a fiber optic pressure transducer are presented and discussed. The transducer consists of a cylindrical metal housing with a specular reflecting aluminum diaphragm at the distal end and a circular array of fiber optic light guides at the proximal end. The center bundle is connected to a light source with the surrounding bundles carrying reflected light to a photodetector. A change in pressure on the diaphragm causes a deflection which in turn causes a change in intensity over the light receiving fibers. The intensity is converted to a voltage signal by the photodetector circuit. Thus, …

Seismic Behavior Of Staggered Truss Framing Systems, University Of Michigan

CCFSS Library (1939 - present)

No abstract provided.

An Experimental Study Of Parametric Pump, Khalid Omar Ranginwala

Theses

In this research for Master's Project, the possibility for separation of glucose and fructose by parametric pumping was investigated. In this research activated carbon was used as adsorbent. First Langmuir's isotherms for glucose and fructose were experimentally found. These results were utilized in the thermal parametric pumping. The pump was run semicontinuously. Parametric pumping was also carried out with KCl +H₂O solution using a resin as adsorbent, and the 'b' value of KCl was found.

Dynamic Childbirth Simulator For Teaching Maternity Patient Care, Charles F. Knapp, George S. Eades

Biomedical Engineering Faculty Patents

A programmable patient simulator for teaching maternity patient care includes a life size manikin with a pelvis, vaginal canal, uterus, placenta, umbilical cord, and a fetal doll from which heart sounds are emitted. A programmable electro-pneumatic system controls the simulated uterine contractions, position of the uterus, rupture of membranes, expulsion of fetal doll, and fetal heart rate during labor and delivery sequence.

Vibratory Densification Of Granular Materials, Gurbux Rai Mehdiratta

Civil Engineering ETDs

The densification behavior of 13 different types of materials was investigated by subjecting each material to vertical simple harmonic motion using an electromagnetic vibrator. A total of more than 1000 maximum density tests were performed. The soil parameters investigated were angularity, uniformity coefficient, percentage of fines and specific gravity. The vibration parameters investigated were frequency, acceleration, displacement and time of vibration. To study the effect of angularity, four different types of materials ranging from angular to rounded were tested. The effect of uniformity coeffi­cient, percentage of fines and specific gravity was investigated by varying the uniformity coefficient from 2 to …

Radiation Effects On Gaasp Light-Emitting Diodes And Schottky Barrier Field-Effect Transistors., Ranjeet Kumar Pancholy

Electrical and Computer Engineering ETDs

New processes have been developed for the fabrication of gallium­arsenide-phosphide light-emitting diodes and Schottky barrier field-effect transistors. The fabricated devices were characterized electrically and were tested in a radiation environment. Transient effects on p-n junction diodes due to high energy electron beams were examined and the permanent damage caused by high energy neutrons on both diodes and SBFETs were evaluated.

A unique open-tube diffusion process was developed for the fabrica­tion of the light-emitting diodes. A thick layer of GaAsP-oxide was grown over the epitaxial surface for surface passivation and to act as a diffusion mask against zinc diffusion into the …

The Condensation Of Vapor On A Horizontal Rotating Square Tube., Suresh Chandra

Chemical and Biological Engineering ETDs

Heat transfer measurements were made for steam vapor condensing at one atmosphere on the outer surface of a horizontal square tube with a side of one inch, when rotated at between O and 1950 rpm. The Froude number (FR) was based on the side length. Three distinct heat-transfer regimes were observed and are correlated with FR. The first is gravita­tion controlled condensate flow when FR is less than 2.0 and the condensing film heat-transfer coefficient decreases. When 2.0

Historical Sketch Of Tractor Testing, Tractor Museum

Individuals Associated with the Nebraska Tractor Test

No abstract provided.

Historical Sketch Of Tractor Testing, Nebraska Tractor Test Lab

Nebraska Tractor Tests

A historical sketch of Tractor Testing at the University of Nebraska-Lincoln. Lester F. Larsen. Engineer in charge since 1947, visits with George S. Round, Professor of Agricultural Communications at the University about individuals who made contributions to the successful program. He also reports on 1,155 tests conducted up to January I, 1974, and contrasts tractors of 1974 with those of 20, 30 or more years ago . Testing fee schedules are reviewed in a self-supporting project favorably known round the world.

Resonance Fluorescence And Resonance Raman Scattering: Lifetimes In Molecular Iodine, P. F. Williams, D. L. Rousseau, D. H. Dworetsky

P. F. (Paul Frazer) Williams Publications

We report a significantly shortened scattering lifetime in molecular iodine when the frequency of a single-mode 5145-Å incident laser is tuned away from resonance with a discrete transition. This observation of a shortened scattering time is indicative of what has been conventionally called a Raman process. Off-resonance lifetime measurements, as reported here, may provide a means of determining the relative contribution to the absorption line-width of homogeneous and inhomogeneous broadening.

Raised Pavement Markers As A Traffic Control Measure At Lane Drops [No. 418], Jerry G. Pigman, Kenneth R. Agent

Kentucky Transportation Center Research Report

Raised pavement markers are an effective means of reducing erratic movements at lane-drop locations, particularly under nighttime driving conditions. The cost of raised pavement markers and their installation is nominal (approximately $150 per lane-drop location). It is recommended that raised pavement markers be installed at other lane-drop locations. Markers installed at locations described in this study have not been in place for a sufficient time to determine their durability; however, reports from other states indicate their durability is sufficient to render them economical. If raised pavement markers are installed routinely, steps should be taken to insure they are not damaged …

Raised Pavement Markers As A Traffic Control Measure At Lane Drops [No. 384], Jerry G. Pigman, Kenneth R. Agent

Kentucky Transportation Center Research Report

Raised pavement markers are an effective means of reducing erratic movements at lane-drop locations, particularly under nighttime driving conditions. The cost of raised pavement markers and their installation is nominal ($150 per location). It is recommended that raised pavement markers be installed at other lane-drop locations. Markers installed at locations described in this study have not been in place for a sufficient time to determine their durability; however, reports from other states indicate their durability is sufficient to render them economical. If raised pavement markers are installed routinely, steps should be taken to insure they are not damaged by snowplow …

A Microscopy Study Of Lead Sinter, Thomas J. O'Keefe, C. Bennett, E. R. Cole

Materials Science and Engineering Faculty Research & Creative Works

Samples of up-draft sinters produced at three different Missouri lead smelters were studied, to determine the chemical phases present, as a first step toward a more complete understanding of the lead blast furnace operation. The sinters seemed to be basically similar, and all the results reported are from samples from one smelter (Herculaneum smelter, St. Joe Minerals). Analytical tools used included the electron microprobe and scanning electron microscope with a non-dispersive X-ray spectrometer attachment Major phase that were positively identified are metallic lead, lead sulfide and zinc ferrite. The predominant lead phase was tentatively identified as a lead oxide-silicate compound. …

An Experimental Study Of Equilibrium Parametric Pumps, John A. Park

Theses

Parametric pumping is a separation process characterized by periodic changes in axial displacement, coupled with synchronized changes in some variable affecting the position of the interphase equilibrium. Both continuous and semicontinuous pumps were investigated at various operating conditions using a model system of toluene-n-hep-tane on a silica gel adsorbent. It has been shown that when the penetration distance for the cold cycle is less than or equal to that for the hot cycle and the height of the column, the pump has the capacity of complete removal of solute from one product stream. A quantity which is important in determining …

A Study Of Fluid Flow Entering A Sharp-Edged Channel, Rocco Racano

Theses

Experimental investigations were carried out on an newtonian fluid In the two dimensional case through the regions of a sharp-edged entrance and exit. Qualitative and quantitative results were compared to a variation of a two dimensional case of converging flow in a capillary as originally derived by Oka and proposed by Philippoff. In addition velocity profiles were taken in the entrance region. Furthermore, the effect of temperature gradients in the slit region with their resulting optical effects were considered. The methods used to obtain these goals were photoelasticity and streak photography.

Results were four, to be consistent with the theory …

Optimization Of Single- And Double-Flash Cycles And Space Heating Systems In Geothermal Engineering, Talal Hussein Hassoun

Dissertations and Theses

Two different problems of optimization in the utilization of geothermal energy are presented: First, the thermodynamic optimization for a geothermal power plant using a single- or double-flash process is considered; in this analysis, the optimum flash temperature giving the maximum power output is determined. Second, an economic optimization for space heating systems using geothermal energy is developed to obtain operating conditions for which the total (capital and operating) cost is a minimum.

Both graphical and analytical methods are used in the thermodynamic optimization to determine the optimum flash temperature. The graphical method is based on thermodynamic data provided by an …

History Of So2 Removal System At The Meramec Plant Of Union Electric, Gerald E. Dreifke, John F. Mclaughlin, Jerrel D. Smith

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

In line with the then emerging air pollution control regulations Union Electric installed a limestone injection wet scrubber sulfur dioxide removal system on an intermediate size coal-fired utility boiler at its Meramec Power Plant on an experimental basis in September, 1968. During approximately 3 years of operation many difficulties were encountered with plugging and scaling of various system components by calcium sulphate. As a result of this experience along with related experiences by other utilities employing similar systems, the experiment was terminated in June, 1971.

As a result of the experiences gained, however, second generation experiments in sulfur dioxide removal …

Automation Of The Continuous Coagulation Monitor, Dee Mitchell, James J. Oskowis

Arkansas Water Resources Center Technical Reports

The development of automation in the past 50 years has paralleled the accelerating growth of today’s vast technological society. Automatic control systems are indispensable extensions of man's brain that enable him to monitor and regulate his complex environment. The principles of automatic control have a wide range of applications and interests in virtually every scientific field. The need for automatic control systems in vital applications of environmental engineering is both real and urgent. Extensive pollution has resulted in unavoidable water re-use and in the inevitable establishment of stringent effluent standards. Both water and wastewater treatment processes have necessarily become more …