Engineering Commons^™

Applications Of Drone Technology With Bim To Increase Productivity, Jesse J. Sanchez

Construction Management

This paper looks directly at BIM and Drone Technology in today's age and how their integrative capabilities with one another can result in a highly productive construction atmosphere. There is an abundance of research for the topic, but no real-life examples. Webcor will serve as this example via case study. The research methodology for the project will come from interviews and a questionnaire featuring a project manager, superintendent, licensed flyer, BIM engineer, and cost estimator. The variety of interviews, will showcase the effects drone technology and BIM have on different sectors of a business. Themes that come out of these …

Feasibility Of Utilizing Autonomous, Trenchless Tunneling Technology, Thomas Arthur Fuentez

Construction Management

The construction industry as a whole has not increased its productivity level as much as other industries in the world. Professionals are constantly trying to think of new ideas and methods to improve the efficiency of construction through new technology. One area in which productivity needs improvement, is in land development. Trenching for underground utilities and services uses a lot of time in a project’s schedule as well as costs which can be reduced with the use of autonomous, trenchless tunneling technology such as the “BADGER”, (RoBot for Autonomous unDerGround trenchless opERations). This technology is being designed to use a …

Financial Feasibility Of Leed Certified Buildings For Developers And Investors, Erik P. Henriksen

Construction Management

This is a case study on a small to mid-size private equity firm that deals with real estate development as well as investment to find out the financial feasibility of LEED certified buildings in today’s building climate. Interviews with two investment analysts at this firm who are versed in LEED certification about how it is looked at in their company as well as the broader industry will give insights into the feasibility of developing or investing in environmentally friendly buildings. This impacts the real estate and construction industries due to the fact that developers and investors are often times a …

Mitigating Carbon Dioxide Emissions In The Cement Industry Through Carbon Capture And Storage, Nicholas J. Cramer

Construction Management

The cement industry is responsible for 7% of industrial energy use, the third largest energy consumer in the world. The industry is also responsible for 7% of global carbon dioxide emissions, the second largest industrial emitter. With current trends continuing, global cement usage will rise with population and urbanization. The low-carbon transition of the cement industry requires innovative technologies and producer cooperation. Carbon capture and storage, known as CCS, is a safe and sustainable solution to significantly reduce the amount being released into the atmosphere. Through CCS, carbon dioxide reacts with natural alkaline minerals, such as fly ash, to create …

Develop An Mep Based Scheduling Learning Module With Industry Support And Guidance To Understand The Impact On The General Contractor, Andy S. Rios

Construction Management

The Construction Management (CM) program at Cal Poly, San Luis Obispo is recognized as one of the best construction programs in country. The curriculum does an extraordinary job at teaching how to utilize software and technology to create a project schedule. The one thing that the curriculum lacks is learning sequencing of events when it comes to scheduling, and where to look to obtain this information. Although learning sequencing for scheduling is hard to teach because it comes with years of industry experience, it is important to have a basic understanding of how things come together to create a functioning …

Creating A Pull Planning Guide For Industry Use, Michael B. Avila

Construction Management

The construction industry is quickly making Pull Planning sessions a commodity only the largest companies can afford due to expensive consultants and the common perception of a complicated process. Pull Planning does not need to be complicated but can be quickly implemented by all types of companies utilizing extensive research completed on The Last Planner System. The benefits of Pull Planning include creating buy-in to the plan, making hand-offs known, and creating reliability and trust from the key Players on a project. As the demand for a more productive construction project rises, it is increasingly important for the scheduling methods …

Tiny Home Retail, Shane M. Simpson

Construction Management

Tiny homes on wheels are exploding in popularity all around the world. Television shows and YouTube channels dedicated to tiny homes have garnered cult followings. Many people view purchasing or constructing a tiny home as a viable option to gain freedom and escape the perceived trap of renting or home ownership. There seems to be a market for these homes, however, after research I found purchasing one can be extremely expensive. Therefore, I decided I would contact manufacturers in China and enter a partnership where I would attempt to sell their tiny homes for a profit. I created a website …

Ciob Global Student Challenge - Integration Into Professional Financial Training, George M. King

Construction Management

As anyone in the construction industry knows, a construction business is one of the most risky to start compared to any other industry. This does not mean that it should be avoided by potential entrepreneurs, just viewed with a more cautious eye than other industries. Those considering entering the industry should have experience and confidence in their ability to perform prior to the establishment of a company. One way to gain this experience is through years of work in the respective sector. Another, more experimental method, is through the use of competitive virtual training. The latter requires less training time …

Cal Poly Engineering East – Building 20, A Critical Analysis Of Mechanical Needs And Distribution Of Mechanical Resources, Rhea Bae

Construction Management

Older buildings on the Cal Poly campus need renovation, particularly with the heating, ventilation, air-conditioning (addressed as HVAC) systems in the classrooms. The HVAC units within the old buildings are obsolete, inefficient, and are most likely due for replacement. The Engineering East building, also known as Building 20, is an example of a campus building that requires a quality HVAC system. By upgrading the HVAC, the building conditions can be positively enhanced through better cooling and ventilation, allowing students in the labs and classrooms to have a better experience within the building. This paper details the methodology behind installing a …

Cmos Design Of An 8-Bit 1ms/S Successive Approximation Register Adc, Ameya Vivekanand Ganguli

Master's Theses

Rapid evolution of integrated circuit technologies has paved a way to develop smaller and energy efficient biomedical devices which has put stringent requirements on data acquisition systems. These implantable devices are compact and have a very small footprint. Once implanted these devices need to rely on non-rechargeable batteries to sustain a life span of up to 10 years. Analog-to-digital converters (ADCs) are key components in these power limited systems. Therefore, development of ADCs with medium resolution (8-10 bits) and sampling rate (1 MHz) have been of great importance.

This thesis presents an 8-bit successive approximation register (SAR) ADC incorporating an …

Transmission Probability Of Embolic Debris Through The Aortic Arch And Daughter Vessels During A Transcatheter Aortic Valve Replacement Procedure, Jessica Lena Wirth

Master's Theses

Cerebral ischemia leading to an ischemic stroke is a possible complication of a transcatheter aortic valve replacement (TAVR) procedure. This is because embolic debris can become dislodged and travel through the aortic arch, where they either continue to the descending aorta and join the systemic circulation or travel into the cerebral vasculature through the three daughter vessels that branch off the top of the aortic arch. These three vessels are the brachiocephalic artery, the left subclavian artery, and the left common carotid artery. These three vessels lead either directly or indirectly to the cerebral vasculature, where the diameter of vessels …

A Fire Protection Analysis Of Kipp Academy Of Opportunity, Shahrzad Alaei

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this report is to analyze and assess the life safety and fire protections systems of the KIPP Academy of Opportunity (KAO) charter school located in South Los Angeles. KAO is a 3-story building with a total area of 27,429 ft2 that was originally built in 2003 to serve 400 students.

Two separate fire and life safety assessments were performed in this project to ensure the building meets the requirements by the building code and fire safety standards. The prescriptive based analysis includes assessment of structural design, construction materials, egress design, fire alarm, communication system, fire suppression system, …

Heat: Hydraulic And Electric Animation Team, Tyler J. Couvrette, Michael J. Cain, Sara T. Novell, Dexter K. Yanagisawa

Mechanical Engineering

Each New Years’ Day, the Cal Poly Rose Float presents a flower-covered float to the world at the Tournament of Roses parade. This floral display, paired with moving mechanical animations, shows off Cal Poly to the world. This project strove to keep Cal Poly on the cutting edge of technology both in parade floats, and in engineering, by creating a completely electric-powered animation system.

To accomplish this, a group of students set out to make the fully electric animation system that can power both the hydraulic and electric mechanisms on the Float. This was accomplished through months of planning and …

C6 Wheels, Samuel L. Pizot, Luke Martin, Josh Warner, Jonah Levis

Mechanical Engineering

This document details the C6 Wheels project being undertaken for senior design. The objective is to design and manufacture carbon fiber reinforced polymer wheels for the Cal Poly Formula Society of Automotive Engineers (FSAE) team. The wheel shells will be used on FSAE’s competition vehicles. FSAE requested the wheels to improve the handling characteristics of their vehicles by reducing the unsprung and rotational mass. They have attempted carbon fiber wheels previously but have not yet run any on their vehicles. FSAE specifically proposed the design of carbon fiber shells with an aluminum center as opposed to full carbon fiber wheels …

An Investigation Of The Anomalous Thrust Capabilities Of The Electromagnetic Drive, Hannah J. Simons

Physics

The Electromagnetic Drive (EMDrive) is a propellant-less engine concept hypothesized by aero- space engineer Roger Shawyer. Shawyer’s proposed thruster technology is grounded on the theory of electromagnetic resonant behavior exhibited by a radiofrequency cavity, though the source of any generated thrust is undetermined by current physical laws. NASA Eagleworks Laboratories at John- son Space Center conducted a vacuum test campaign to investigate previously reported anomalous thrust capabilities of such a closed radiofrequency cavity, using a low-thrust torsion pendulum. The team published positive, although small-scaled thrust results in 2017. Following NASA Eagleworks breakthrough result and operating under the assumption that the …

Designing A Simulator For An Electrically-Pumped Organic Laser Diode, Robert Hulbert

Master's Theses

Organic semiconductors provide an alternative set of basis materials to fabricate electronic devices like PN Junctions, LEDs, and FETs. These materials have several benefits over traditional inorganic semiconductors including their mechanical flexibility, reliance on renewable resources, and inexpensive large-scale manufacturability. Despite the contemporary device implementations with organic semiconductors, a solid-state electrically-pumped organic laser diode does not exist. However, organically-based lasers do exist by utilizing the organic material strictly for optical gain. The challenge occurs when charge carriers appear in the organic material. The charge carriers must reach a concentration such that population inversion occurs producing optical gain. However, between the …

Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler

Architectural Engineering

Masonry is a major structural material for low rise buildings, however the design of masonry buildings is rarely taught as a formal course at most universities. As part of the educational experience and to become familiar with the specifications and testing procedures for grouted masonry, a student run experiment on varying the water to cement ratio of masonry grout was conducted. The purpose is to report on the effects of changing the water-to-cement (W/C) ratios in a standard grout mix. The typical W/C ratio is approximately 0.80:1.00. In order to show the effects of increasing water in a grout mix, …

Dc-Dc Buck-Boost Converter For Energy Harvesting From Exercise Equipment, David T. Bolla

Electrical Engineering

This senior project helps harvest the excess energy that exercise equipment generates. Sustainable energy acts as the main target for this project, and it attempts this through reusing the energy created when exercising on elliptical machines. An elliptical machine outputs voltages between approximately 5V and 60V, and a micro-inverter requires an input voltage of about 36V. This DC-DC converter takes the variable output voltage of an elliptical machine and brings it to approximately 36V. Re-purposing the excess energy an elliptical user creates for the grid provides a sustainable alternative to dissipating the energy as heat. This project, along with other …

Dc To Dc Usb-C Charger, Nikki Gmerek, Kenneth Nguyen, Uriel Serna

Electrical Engineering

The DC House USB-C Charger will convert the 48V input from the DC house, found on the Cal Poly campus, to 3 USB-C outputs: 5V, 12V, and 24 volts. The converter will deliver a total of 185 Watts out across all 3 outputs, with an efficiency greater than 82% at full load. The USB-C ports will be used to connect to compatible phones, laptops or any other device for charging/powering purposes. The goal of this project is to develop the most efficient and safe converter to deliver power to multiple outputs using USB-C, for items as small as a cell …

Cal Poly Ee 518 Electric Power Protection Laboratory, Richard Terre, Vincent Tham, Austin Kurth

Electrical Engineering

Facing a rapidly-changing power industry, the electrical engineering department at Cal Poly San Luis Obispo proposed Advanced Power Systems Initiatives to better prepare its students for entering the power industry. These initiatives call for the creation of a new laboratory curriculum that utilizes microprocessor-based relays to reinforce the fundamental concepts of power system protection.

The electric power protection laboratory (EPPL) senior project is the validation of lab manuals written for the planned EE-518 power system protections laboratory looking to be offered in Spring 2020 alongside the current lecture class under the same designation. This report evaluates the lab manual, verifies …

Portable Electrocardiogram Device And Signal Processing Design, Ryan F. Blaalid

Electrical Engineering

Full 12-lead electrocardiogram (ECG) measurements require inconvenient and time consuming adhesive electrode placement. This project proposes a design for a Bluetooth based ECG for remote patient measurement. The device is designed to measure up to 6-leads and utilizes 5 dry (non-adhesive) electrodes to accomplish this. The device delivers the ECG data to the user’s mobile smart phone and can then be sent to the patient’s doctor for analysis. Since the contact of the dry electrodes to the skin is not perfect, low-frequency noise called baseline wandering is introduced. A signal processing technique borrowed from image processing called morphological filtering is …

Pv Hybrid Inverter And Bess, Jacob Sussex, William Dresser, Owen Mckenzie, Jonathan Wharton, Derek Seaman

Electrical Engineering

The storage of energy from renewable sources such as photovoltaic based systems is a growing market, with 36 MWh of storage installed in Q1 of 2018. A report from EnergySage earlier this year states that in 2017, 74% of residential solar owners were also interested in energy storage systems. Mainstream systems like Tesla’s Powerwall are competing with other lithium-ion based storage systems from a wide number of providers on the market today. Short term and long term data collection on a system like this could be useful in designing future systems which perform better than the current market offerings. This …

Frequency Modulation Integrated Circuit For Radars, Jade S. Visutsiaz, Hue Thu Doung

Electrical Engineering

Frequency-modulated continuous wave radars are a type of radar capable of measuring the distance to a stationary object or velocity of a moving object by radiating a continuous transmission of a signal that linearly sweeps its frequency repeatedly between two set frequencies. Frequency-modulated continuous wave radar signals are generated by a high frequency voltage-controlled oscillator or digital-to-analog converter. This project is an integrated circuit that produces the frequency-modulated signal on a single chip in the analog realm. The circuit was designed using Cadence Virtuoso with TSMC 180 nm process technology model. The generated signal is intended for use with ultra-wideband …

Dc House Smart Pathway Lighting System, Benjamin H. Tan, Rafael Santiago, Brendan Schoemehl

Electrical Engineering

The Student Experimental Farm (SEF) is a two-acre site where students are able to create projects and experiments. It is also the location of the DC House project, a house with electricity provided by DC power as opposed to the traditional AC power. The motive of the DC house project is to provide affordable and renewable electricity for people living in remote areas where ac power grids are not available. Currently, the SEF does not have any lighting, so students would have to work in the dark after the sun sets. By creating a smart lighting system for the pathway …

Dc-Dc Converter For Electric Vehicle, Jason Y. Zhou, Nicholas James Mah

Electrical Engineering

In this work, a DC-DC converter is designed for an electric vehicle. The DC-DC converter is designed to provide 500W with a 200-400V input and a 12-15V adjustable output. Electric vehicle sales are beginning to increase in popularity and the need for DC-DC converters to siphon power from the tractive system is not yet fully satisfied, especially for single-seater class vehicles. Additionally, improving performance in efficiency without sacrificing wide input voltage range can benefit future DC-DC converter designs. In the end, a forward active clamp DC-DC converter is designed and tested. Additionally, spreadsheet calculators, LTSpice simulations, and Matlab scripts were …

The Performance Cost Of Security, Lucy R. Bowen

Master's Theses

Historically, performance has been the most important feature when optimizing computer hardware. Modern processors are so highly optimized that every cycle of computation time matters. However, this practice of optimizing for performance at all costs has been called into question by new microarchitectural attacks, e.g. Meltdown and Spectre. Microarchitectural attacks exploit the effects of microarchitectural components or optimizations in order to leak data to an attacker. These attacks have caused processor manufacturers to introduce performance impacting mitigations in both software and silicon.

To investigate the performance impact of the various mitigations, a test suite of forty-seven different tests was created. …

Atmospheric Water Harvesting: An Experimental Study Of Viability And The Influence Of Surface Geometry, Orientation, And Drainage, Carson T. Hand

Master's Theses

Fresh water collection techniques have gained significant attention due to global dwindling of fresh water resources and recent scares such as the 2011-2017 California drought. This project explores the economic viability of actively harvesting water from fog, and techniques to maximize water collection. Vapor compression and thermoelectric cooling based dehumidifier prototypes are tested in a series of experiments to assess water collection capability in foggy environments, and what parameters can increase that capability. This testing shows an approximate maximum collection rate of 1.25 L/kWh for the vapor compression prototype, and 0.32 L/kWh for the thermoelectric cooling prototype; compared to 315 …

A Comparison Of Water Main Failure Prediction Models In San Luis Obispo, Ca, Kyle Eric Aube

Master's Theses

This study compared four different water main failure prediction models: a statistically simple model, a statistically complex model, a statistically complex model with modifications termed the 2019 model, and an age-based model. The statistically complex models compute the probability of failure based on age, size, internal pressure, length of pipe in corrosive soil, land use, and material of the. These two values are then used to prioritize a water main rehabilitation program to effectively use the municipality’s funds. The 2019 model calculates the probability of failure and consequence of failure differently than the statistically complex model by considering corrosive soil …

Field Emissions Of Methane And Nitrous Oxide From California Landfills, Alexandra D. Limpert

Master's Theses

Comprehensive and systematic aerial and field investigations were conducted at representative California landfills to quantify emissions of methane and nitrous oxide. Landfills are highly engineered; however, they are one of the largest anthropogenic sources of greenhouse gases, causing human health and safety concerns. Methane (CH₄) and nitrous oxide (N₂O) are significant greenhouse gases with high global warming potentials that are generated in a landfill environment.

For site selection, sites were evaluated based on waste in place, climate zone, faults and oil and gas operations, population density, cover conditions and percentage of cover types, age of waste, …

Cloneless: Code Clone Detection Via Program Dependence Graphs With Relaxed Constraints, Thomas J. Simko

Master's Theses

Code clones are pieces of code that have the same functionality. While some clones may structurally match one another, others may look drastically different. The inclusion of code clones clutters a code base, leading to increased costs through maintenance. Duplicate code is introduced through a variety of means, such as copy-pasting, code generated by tools, or developers unintentionally writing similar pieces of code. While manual clone identification may be more accurate than automated detection, it is infeasible due to the extensive size of many code bases. Software code clone detection methods have differing degree of success based on the analysis …