Engineering Commons^™

Self-Healing Microcapsules As Concrete Aggregates For Corrosion Inhibition In Reinforced Concrete, Homero Castaneda, Marwa Hassan, Miladin Radovic, Jose Milla

Publications

Reinforced Concrete (RC) structures are vital to the US’s civil infrastructure for their strength and versatility. Unfortunately, RC elements deteriorate rapidly when exposed to corrosive environments. One possible solution is to extend the life of RC elements and systems using microencapsulated corrosion inhibitors to reduce the rebar corrosion rate. The capsules house an anodic corrosion inhibitor agent including calcium nitrate (CN) and triethanolamine (TEA). The integration of such microencapsulated materials will enhance the durability and extend the useful life by controlling the corrosion precursors and the corrosion process during damage evolution. Therefore, this work aims to develop and characterize the …

Development, Training, Education, And Implementation Of Low-Cost Sensing Technologies For Bridge Structural Health Monitoring (Shm), Fernando Moreu, Chris Lippitt, Dilendra Maharjan, Marlon Aguero, Roya Nasimi

Publications

Transportation infrastructure needs continuous monitoring. However, traditional inspections cost money and are conducted visually. New technologies for bridge monitoring are expensive and complex. This project involved developing cost-effective sensor technologies that can be applied towards the maintenance of railroad bridges by recording reference-free transverse displacement. More specifically, this project developed new applications of new technologies (Arduino, wireless smart sensors, drones, Hololens) and promoted workforce development with an emphasis on outreach of high-school students. This project was carried out in three main phases: (1) development and validation of technologies, (2) education and outreach to students, and (3) outreach to industry consisting …

Sustainability-Based Long-Term Management Of Bridges Under Multi-Hazard Exposure, Mohamed Soliman

Publications

Bridges are under deterioration due to various mechanical and environmental stressors. Hydraulic-related hazards (e.g., flood and scour), aggressive environmental conditions, and seismic events (e.g., earthquake) are recognized as the most significant threats to the safety of bridges. In traditional risk assessment methods for structures susceptible to damage due to floods and other natural hazards (e.g., corrosion and seismic events), future hazard predictions are conducted using historic return periods and climate records. However, recent increase in flood intensity in central-southern states indicate that future hazard occurrence rate may not necessarily follow past trends. Accordingly, current design, assessment, and management methodologies should …

Statistical Investigation Of Road And Railway Hazardous Materials Transportation Safety, Amirfarrokh Iranitalab

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Transportation of hazardous materials (hazmat) in the United States (U.S.) constituted 22.8% of the total tonnage transported in 2012 with an estimated value of more than 2.3 billion dollars. As such, hazmat transportation is a significant economic activity in the U.S. However, hazmat transportation exposes people and environment to the infrequent but potentially severe consequences of incidents resulting in hazmat release. Trucks and trains carried 63.7% of the hazmat in the U.S. in 2012 and are the major foci of this dissertation. The main research objectives were 1) identification and quantification of the effects of different factors on occurrence and …

Driver Comprehension Of Permissive Right-Turns With A Flashing Yellow Arrow (Fya), Christopher Monsere, David Hurwitz

PSU Transportation Seminars

This research explored driver comprehension and behaviors with respect to right-turn signal displays with a focus on the Flashing Yellow Arrow (FYA) in a driving simulator and a comprehension survey. Flashing yellow arrows are used in place of other turn signals, such as solid green or flashing yellow or red circles, to indicate that drivers may turn after yielding to oncoming traffic. These turns are considered “permissive.” Turns where no conflicting traffic is present, such as those indicated with a green arrow, are “protected” turns. The flashing yellow arrow’s inclusion in the 2009 Manual on Uniform Traffic Control Devices sped …

17-01 An Intersection Database Enhances Blind Pedestrians' Access To Complex Signalized Intersections: Stage 2 Analysis & Database Development, Dave Guth, Janet Barlow, Paul Ponchillia, Lee Rodegerdts, Dae Shik Kim, Kevin Lee

Transportation Research Center Reports

This project investigated the effects of providing verbal descriptions of intersections and crosswalks on the performance of street-crossing subtasks by individuals who are totally blind. The intersections included crosswalks that varied widely in geometric and operational characteristics, including the presence or absence of accessibility features. In the no-database condition, participants used their typical street-crossing procedures. In the database-condition, participants additionally listened to database-generated descriptions of the intersections and crosswalks before crossing. The database descriptions had significant positive effects on some subtasks (primarily “crossing” subtasks such as deciding when to cross) and not others (primarily “wayfinding” subtasks such as remaining in …

Webinar: Addressing Bicycle-Vehicle Conflicts With Alternate Signal Control Strategies, Sirisha Kothuri

TREC Webinar Series

There is nationwide interest in supporting sustainable and active transportation modes such as bicycling and walking due to the many benefits associated with them, including reduced congestion, lower emissions and improved health. Although the number of bicyclists is increasing, safety remains a top concern. In urban areas, a common crash type involving bicycles at intersections is the “right hook” where a right-turning vehicle collides with a through bicyclist. While geometric treatments and pavement markings have been studied, there is a lack of research on signal timing treatments to address right-hook bicycle-vehicle conflicts.

Addressing Bicycle-Vehicle Conflicts with Alternate Signal Control Strategies …

Machine Learning Tools For Optimization Of Fuel Consumption At Signalized Intersections In Connected/Automated Vehicles Environment, Saleh Ragab Mousa

LSU Doctoral Dissertations

Researchers continue to seek numerous techniques for making the transportation sector more sustainable in terms of fuel consumption and greenhouse gas emissions. Among the most effective techniques is Eco-driving at signalized intersections. Eco-driving is a complex control problem where drivers approaching the intersections are guided, over a period of time, to optimize fuel consumption. Eco-driving control systems reduce fuel consumption by optimizing vehicle trajectories near signalized intersections based on information of the SpaT (Signal Phase and Timing). Developing Eco-driving applications for semi-actuated signals, unlike pre-timed, is more challenging due to variations in cycle length resulting from fluctuations in traffic demand. …

Crash/Near-Crash: Impact Of Secondary Tasks And Real-Time Detection Of Distracted Driving, Peter Ramzy Zaki Bakhit

LSU Doctoral Dissertations

The main goal of this dissertation is to investigate the problem of distracted driving from two different perspectives. First, the identification of possible sources of distraction and their associated crash/near-crash risk. That can assist government officials toward more informed decision-making process, allowing for optimized allocation of available resources to reduce roadway crashes and improve traffic safety. Second, actively counteracting the distracted driving phenomenon by quantitative evaluation of eye glance patterns.

This dissertation research consists of two different parts. The first part provides an in-depth analysis for the increased crash/near-crash risk associated with different secondary task activities using the largest real-world …

Unobserved Heterogeneity And Spatial Correlation: Statistical And Econometric Analyses Of Heavy-Vehicle Hard Braking And Crash Frequency, Jason Anderson

PSU Transportation Seminars

In heavy-vehicles (a truck with a gross vehicle weight rating of greater than 10,000 pounds), a hard braking event is described as an event that prompts the vehicle’s “black box” to record an abrupt change in speed. More specifically, this occurs when the driver applies excess force to the vehicle’s brake. These hard braking events can then serve as a proxy for several factors, such as economic impacts, environmental impacts, and impacts on safety. In the context of the present study, being that approximately one-third of all heavy-vehicle-caused crashes in 2014 were attributed to faulty brakes, there is a need …

Tncs & Congestion, Joe Castiglione, Drew Cooper, Bhargava Sana, Dan Tischler, Tilly Chang, Gregory D. Erhardt, Sneha Roy, Mei Chen, Alex Mucci

Civil Engineering Reports

From the executive summary:

This document:

• Identifies common measures of roadway congestion;
• Discusses factors that contribute to roadway to congestion; and
• Quantifies the relative contributions of different factors, including population, employment, road network changes and TNCs, to observed changes in congestion in San Francisco between 2010 and 2016, by location and time of day.

The report utilizes a unique TNC trip dataset provided to the Transportation Authority by researchers from Northeastern University in late 2016, as well as INRIX data, a commercial dataset which combines several real-time GPS monitoring sources with data from highway performance monitoring systems. These data are …

Modeling The Impact Of Traffic Conditions And Bicycle Facilities On Cyclists' On-Road Stress Levels, Àlvaro Caviedes, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Past research efforts have shown that cyclists’ safety, stress, and comfort levels greatly affect the routes chosen by cyclists and cycling frequency. Some researchers have tried to categorize cyclists’ levels of traffic stress utilizing data that can be directly measured in the field, such as the number of motorized travel lanes, motorized vehicle travel speeds, and type of bicycle infrastructure. This research effort presents a novel approach: real-world, on-road measurements of physiological stress as cyclists travel across different types of bicycle facilities at peak and off-peak traffic times. By matching videos with stressful events, it was possible to observe the …

Prediction And Rehabilitation Of Highway Embankment Slope Failures In Changing Climate, Navid Jafari, Anand Puppala

Publications

Highway slopes constructed with clayey soil are prone to desiccation cracks due to wetting and drying weather cycle, which allows greater moisture infiltration into the embankment from precipitation. Fissures formed due to extended wetting and drying cycles allow water to seep deeper into the soil than surficial wetting and increase the water content. This increases the moisture content in the soil and results in reduction in shear strength to the fully softened strength. On the other hand, development of desiccation cracks and reduction of the soil matric suction ultimately result in higher hydraulic conductivity value which causes development of higher …

Enhancing The Durability And The Service Life Of Asphalt Pavements Through Innovative Light-Induced Self-Healing Materials, Marwa Hassan

Publications

The objective of this study was to evaluate the efficiency of a new generation of Ultraviolet (UV) light-induced selfhealing polymers in enhancing the durability and self-healing properties of asphalt mixtures. Self-healing polymers were successfully synthesized in the laboratory and were characterized using Fourier Transform Infrared Spectroscopy (FTIR). In addition, Thermogravimetric Analysis (TGA) results showed that the synthesized polymers achieved the required thermal stability to resist asphalt mixture production processes. Viscosity results showed that addition of 5% Recycled Asphalt Shingle (RAS) and/or 20% Reclaimed Asphalt Pavement (RAP) caused an increase in the viscosity of the binder blends. However, a reduction in …

Evaluation Of The Performance And Cost-Effectiveness Of Engineered Cementitious Composites (Ecc) Produced From Region 6 Local Materials, Gabriel Andres Arce Amador, Tyson Rupnow, Marwa Hassan

Publications

The project objective is to develop cost-effective Engineered Cementitious Composites (ECC) with locally available ingredients in Region 6 to address the deficiencies observed in ordinary concrete materials. The study explored the utilization of two types of river sands (coarse and fine), two types of PVA fibers (long and short), four levels of cement replacement with Class F fly ash, and the implementation of recycled crumb rubber in the performance of ECC materials. A total of 24 mix designs were prepared and evaluated in compression, tension, and bending to assess its mechanical properties. Furthermore, the cracking characteristics of the materials produced …

In-Situ Mechanical Characterization For Compacted Aggregates, Douglas Cortes, Paola Bandini

Publications

The evaluation of compacted unbound aggregate layers is perhaps the most common undertaking in transportation-related projects. The assessment of compaction compliance in engineered fills, subgrades, subbases, and bases in roadways and railways is central to ensure longevity of ground transportation infrastructure. In many cases, premature failures in roadways that originate in the unbound aggregate layers can be traced back to inadequate compaction. These failures are preventable, provided the problem areas can be identified by a suitable field test during construction. The most widely used method for compaction assessment during construction is the nuclear density gauge (NDG) test. While the device …

Bridge Inspecting With Unmanned Aerial Vehicles R&D, Paul Darby, Vijaya Gopu

Publications

The project achieves through research including literature, on site interviews, and experimentation: 1) a recommendation for a UAV-based system to practically assist in routine bridge inspection work in the State of Louisiana, 2) the identification and description of advantages, disadvantages, and limitations in the use of UAVs for routing bridge inspection work in Louisiana, and 3) provided recommendations for future work. The Yuneec H520 aircraft and its E90 camera are recommended, as is the need for a boat to be included as part of the system. The recommended system has advantages in reaching portions of the bridge that are difficult …

Use Of Rice Hull Ash (Rha) As A Sustainable Source Of Construction Material, Zahid Hossain, Ashraf Elsayed

Publications

With the imminent shortage of natural resources, the need to find sustainable development is the highest in recent history. Therefore, this study examines the potential uses of Rice Hull Ash (RHA) as a sustainable cementitious material (SCM) in preparation of concrete. This study also assesses the use of RHA as an alternative of commonly used polymers in preparing high-grade asphalt binders. RHA is a potential sustainable solution because it is currently being treated as an agricultural waste material, yet its high silica content makes it a potential construction material. Three different sizes of RHA (600 µm, 150 µm, and 44 …

Development Of A Self-Healing And Rejuvenating Mechanisms For Asphalt Mixtures Containing Recycled Asphalt Shingle, Marwa Hassan

Publications

The objective of this study was to test the hypothesis that hollow-fibers encapsulating a rejuvenator product could improve both self-healing, rejuvenation, and mechanical properties of asphalt mixtures. Hollow-fibers containing a rejuvenating product were synthesized via a wet spinning procedure with sodium-alginate polymer as the encapsulating material. An optimization of the production parameters for the synthesis of fibers was performed to develop fibers suitable for high-temperature and shear stress environment typical of asphalt mixture production. A self-healing experiment was conducted to evaluate the healing/rejuvenation capabilities of sodium-alginate fibers in asphalt mixtures with varying types of binders and recycled materials. Based on …

Development Of Environmentally-Friendly Stabilization Methods For Transportation Infrastructure Based On Geopolymers, Miladin Radovic, Anand Puppala

Publications

Geopolymers (GPs) have received much attention as an eco-friendly and sustainable alternative to conventional chemical additives, since they can be processed at room temperatures from aqueous solutions by utilizing waste materials (e.g. fly ash) or abundant natural sources (e.g. clay). A collaborative research study is carried out by teams from Texas A&M University (TAMU) and University of Texas at Arlington (UTA) to investigate the effectiveness of GPs for stabilizing base and subgrade materials by considering the strength and shrink-swell characteristics. Two types of clay, obtained from the North Dallas area, were mixed with a potassium-based GP synthesized from metakaolin and …

Sustainable And Equitable Financing For Pedestrian Infrastructure Maintenance, Gregory Rowangould

Publications

In many communities, pedestrian infrastructure is discontinuous, inaccessible to those with physical disabilities, and poorly maintained. Correcting these problems would be a first step in providing infrastructure to achieve the active travel and related transportation goals of many communities. One nearly universal challenge to maintaining sidewalks in a state of good repair and addressing environmental justice concerns is an adequate, sustainable, and equitable source of funding. Municipal governments across the country maintain and repair their streets and roadways; however, most require residents to maintain and repair public sidewalks adjacent to their property. These policies are difficult to enforce and may …

Bridge Deck Overlays Using Ultra-High Performance Concrete, Craig Newtson, Brad Weldon

Publications

This study investigated the use of a locally produced ultra-high performance concrete (UHPC) as an alternative to typical overlay materials. Several bond strength tests including slant-shear, splitting tension, and direct tension tests were performed to assess the bond strength between UHPC and normal strength concrete (NSC) substrate with varying surface textures. Tests were also conducted to assess the early-age and longer-term shrinkage behavior and coefficient of thermal expansion of the UHPC as well as rapid chloride permeability testing. Good bond between UHPC and NSC substrate was observed even with inadequate surface texture. Combined shrinkage and thermal effects were investigated for …

Does Length Of Ride, Gender Or Nationality Affect Willingness To Ride In A Driverless Ambulance?, Stephen Rice, Scott R. Winter, Rian Mehta, Joseph R. Keebler, Bradley S. Baugh, Emily C. Anania, Mattie N. Milner

Publications

Due to the frequent lack of ambulances and personnel, the purpose of this study was to examine consumers’ willingness-to-ride in an ambulance that was either driven by a human driver or completely automated (with no human driver) based on the gender of the participant and their nationality, either Indian or American. A two-study experimental design was utilized using over 1,000 participants. In Study 1, the length of the ride and the type of driver were manipulated while in Study 2, the length of the ride was manipulated across genders and nationality. Study 2 also collected affect measures to complete a …

Experimental Tests And Numerical Simulations For Failure Investigation On Corrugated Boxes Used On Household Appliance Packaging, Diego Fernandes Rodrigues, José Carlos Pereira

Journal of Applied Packaging Research

Packages made of corrugated paper are fundamental to the protection, transportation and handling of the appliance product market. During the storage and sales stages of a product, the package must resist compressive loads in different directions beyond moderate impacts. In this context, the objective of this work is to develop and implement a post-processor that allows the simultaneous analysis of two of the most common failure modes of packages made of corrugated paper: failure due to tensile or compressive stress limit, and failure due to local buckling, when the buckling of the faces of the corrugated paper between two peaks …

Some Aspects Of Studying The Structure Of Construction Materials By The Method Of Mercury Purometry, Anvar Ishanovich Adilkhodjayev, I.A. Kadirov

Journal of Tashkent Institute of Railway Engineers

The article gives a classification of methods for controlling the porous structure of materials. The parameters of the porosity of aerated concrete were investigated by the method of mercury porosimetry. The method of mercury porosimetry is based on the fact that a liquid that does not wet a solid penetrates into its pores only when exposed to external pressure. The total porosity of aerated concrete according to mercury porosimetry is 49.28%

Driver Distraction In Microsimulation Of A Mid-Block Pedestrian Crossing, Darryl Joseph Michaud

Dissertations and Theses

Traffic simulation has become an invaluable part of the traffic engineering toolbox. However, the majority of driver models are designed to recreate traffic performance based on interactions among vehicles. In keeping with this pursuit, most are fundamentally built to avoid collisions. This limits the applicability of using these models for addressing safety concerns, especially those regarding pedestrian safety performance. However, by explicitly including some of the sources of human error, these limitations can, in theory, be overcome. While much work has been done toward including these human factors in simulation platforms, one key aspect of human behavior has been largely …

16-06 Vehicle-To-Device (V2d) Communications: Readiness Of The Technology And Potential Applications For People With Disability, Ala Al-Fuqaha, Jun-Seok Oh, Valerian Kwigizile

Transportation Research Center Reports

IEEE 802.11p was developed as an amendment to IEEE 802.11 for wireless access in vehicular environments (WAVE). While WAVE is considered the de facto standard for V2V communications, in the past few years a number of communications technologies have emerged that enable direct device-to-device (D2D) communications. Technologies like Bluetooth Smart, WiFi-Direct and LTE-Direct allow devices to communicate directly without having to rely on existing communications infrastructure (e.g., base stations). More importantly, these technologies are quickly penetrating the smartphones market.

The goal of this research is to conduct extensive simulation and experimental studies to assess the efficacies of utilizing D2D communications …

Rheological Performance Of Bio-Char Modified Asphalt With Different Particle Sizes, Ran Zhang, Qingli Dai, Zhanping You, Hainian Wang, Chao Peng

Michigan Tech Publications, Part 1

To improve the performance of petroleum asphalt, bio-char was used as a modifier for a petroleum asphalt binder, in this study. The rheological properties of bio-char modified asphalt binders were compared with different particle sizes and contents, with one control and one flake graphite modified asphalt binder. Specifically, the bio-char modifiers with two particle sizes (ranging from 75 μm–150 μm and less than 75 μm) and three contents of 2%, 4%, and 8% were added into the asphalt binder. A flake graphite powder with particle sizes less than 75 μm was used as a comparison modifier. The Scanning Electron Microscopy …

Waterproofing Options For Bridge Decks, Danny Wells, Sudhir Palle, Theodore Hopwood Ii

Kentucky Transportation Center Research Report

Due to the increasing use of deicing chemicals and the subsequent intrusion of chlorides into bridge decks, it is necessary to expand the use of available protective measures, including waterproofing materials. Waterproofing options that fall into three categories; 1) membranes (liquid and sheet systems), 2) friction polymers (laminates), and 3) polymer asphalts. This study assessed the waterproofing characteristics of these products. Prior to this study, no common test had been established to compare the performance of waterproofing products. A test method was developed that closely follows ASTM D5084, “Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials …

Data From: Market Segment Prediction Tool, Philip L. Winters, Amy Lester

TREC Datasets and Databases

Social marketing seeks to develop and integrate marketing concepts with other approaches to influence behaviors that benefit individuals and communities for the greater social good. Social marketing is a useful transportation demand management (TDM) planning approach to promote travel-behavior change, and combines at least seven distinguishing features that sets it apart from other popular, behavior-change planning approaches, such as education and mass media campaigns. These seven features include a focus on socially beneficial behavior change; a strong consumer orientation; the use of audience segmentation techniques and the selection of target audiences; the use of marketing’s conceptual framework (marketing mix and …