Engineering Commons^™

Computationally Modeling The Human-Structure Interaction Response Of An Occupied Cantilevered Structure, Brennan Smith

Honors Theses

There is a limited understanding of the impact that passive human occupants have on a dynamic structural system, referred to as Human-Structure Interaction (HSI). Cantilevers are naturally prone to excessive vibrations due to their long unsupported spans, and cantilevered structures such as those commonly found in the seating area of a stadium facility or concert hall are designed to support a high density of occupancy.

This study determined that HSI in cantilevered structures can be modeled using a simple two-degree-of-freedom system. The results of the model were validated by data that was collected on a small-scale laboratory structure intentionally designed …

Electrochromic Polymers: From Electrodeposition To Hybrid Solid Devices, Haradou Sare, Dongmei Dong

Faculty Scholarship for the College of Science & Mathematics

This paper reports on the linear colorimetric and electrochromic (EC) characteristics of electrodeposited polyaniline (PANI) films. This paper also investigates the infrared EC properties of acid-doped PANI films. The electrochemical polymerization method was employed to create a porous and thin PANI film layer onto PET-ITO substrates. This layer was capped with WO3 film to create a gel electrolyte sandwich structure that demonstrates the compatibility of PANI films with cathodic WO3 films in full devices. The electrodeposition of the film was fabricated by applying different voltages and time, with the optimal film quality achieved with the 1.7 V voltage and a …

Effective Drag Coefficient Prediction On Single-View 2d Images Of Snowflakes, Cameron Hudson

Graduate College Dissertations and Theses

The drag coefficient of snowflakes is an crucial particle descriptor that can quantify the relationships with the mass, shape, size, and fall speed of snowflake particles. Previous studies has relied on estimating and improving empirical correlations for the drag coefficient of particles, utilizing 3D images from the Multi-Angled Snowflake Camera Database (MASCDB) to estimate snowflake properties such as mass, geometry, shape classification, and rimming degree. However, predictions of the drag coefficient with single-view 2D images of snowflakes has proven to be a challenging problem, primarily due to the lack of data and time-consuming, expensive methods used to estimate snowflake shape …

Cross-Layer Design Of Highly Scalable And Energy-Efficient Ai Accelerator Systems Using Photonic Integrated Circuits, Sairam Sri Vatsavai

Theses and Dissertations--Electrical and Computer Engineering

Artificial Intelligence (AI) has experienced remarkable success in recent years, solving complex computational problems across various domains, including computer vision, natural language processing, and pattern recognition. Much of this success can be attributed to the advancements in deep learning algorithms and models, particularly Artificial Neural Networks (ANNs). In recent times, deep ANNs have achieved unprecedented levels of accuracy, surpassing human capabilities in some cases. However, these deep ANN models come at a significant computational cost, with billions to trillions of parameters. Recent trends indicate that the number of parameters per ANN model will continue to grow exponentially in the foreseeable …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Numerical Study Of Owls' Leading-Edge Serrations, Asif Shahriar Nafi, Nikolaos Beratlis, Elias Balaras, Roi Gurka

Physics and Engineering Science

Owls' silent flight is commonly attributed to their special wing morphology combined with wingbeat kinematics. One of these special morphological features is known as the leading-edge serrations: rigid miniature hook-like patterns found at the primaries of the wings' leading-edge. It has been hypothesized that leading-edge serrations function as a passive flow control mechanism, impacting the aerodynamic performance. To elucidate the flow physics associated with owls' leading-edge serrations, we investigate the flow-field characteristic around a barn owl wing with serrated leading-edge geometry positioned at 20° angle of attack for a Reynolds number of 40 000. We use direct numerical simulations, where …

Combined Risk Based Inspection And Fault Tree Analysis For Repetitive 3-Phase Line Piping Leakage At West Java Offshore Topside Facility, Dona Yuliati, Akhmad Herman Yuwono, Datu Rizal Asral, Donanta Dhaneswara

Journal of Materials Exploration and Findings

Hydrocarbon releases might result in serious consequences in various aspects. In addition to the contribution to environmental pollution, repetitive leakages need high repair costs. This study aim is to minimize potential repetitive leakage for other typical 3-phase piping systems. We conducted the risk assessment by adopting Risk Based Inspection (RBI) API 581 to identify risk level, calculating piping lifetime, recommended inspection plan and mitigations. The most relevant root causes can be obtained through quantitative Fault Tree Analysis (FTA). Observation and investigation was taken from eight 3-phase piping systems that experienced repetitive leakages. It has been found that the risk level …

Nitrogen Gas Quenching Pressure Effect On Bs S155 Alloy Steel In Vacuum Furnace, Agus Mulyadi Hasanudin, Eddy Sumarno Siradj

Journal of Materials Exploration and Findings

The production of metal and alloy products requires the use of heat treatment, when during the heat treatment process, quenching is a crucial step. The quenching medium can be anything from water, a salt bath, oil, air and gas. In a vacuum furnace, pressurized gas, most frequently nitrogen (N₂) gas, serves as one of the quenching mediums. One of the drawbacks of the quenching process is the distortion and dimensional change of the parts. This paper aims to investigate the influence of nitrogen gas quenching pressure on the distortion and dimensional change of aerospace actuator gear planet parts …

Volumetric Imaging Using The Pupil-Matched Remote Focusing Technique In Light-Sheet Microscopy, Sayed Hassan Dibaji Foroushani

Optical Science and Engineering ETDs

ABSTRACT

The dissertation explores innovative techniques in light sheet microscopy, a pivotal tool in biomedical imaging, to enhance its speed, resolution, and efficiency in capturing dynamic biological processes. Light sheet microscopy allows for quick 3D imaging of biological specimens ranging from cells to organs with high spatiotemporal resolution, large field-of-view, and minimal damage, making it vital for in vivo imaging.

The first project introduces a novel optical concept designed to optimize Axially Swept Light Sheet Microscopy (ASLM). This technique is crucial for imaging specimens ranging from live cells to chemically cleared organs due to its versatility across different immersion media. …

Fe Analysis Of Tsunami Generation During The Genesis Flood, Tim Lewis, John Baumgardner

Proceedings of the International Conference on Creationism

Within the framework of catastrophic plate tectonics, large tsunamis are a plausible mechanism for producing fossil-bearing sediments of the Flood rock record. The focus of this research is to model the behavior of an overriding slab in response to a rapidly subducting plate with the aim of understanding in more detail the tsunami generation process. Key to this process is the locking and unlocking of the overriding and subducting slabs. The unlocking results in the rapid rise of the sea bottom and generation of a tsunami. Several key questions arise in this context that the model seeks to answer. What …

Modeling The Process Of Rapid Geomagnetic Reversal During The Genesis Flood, Eric T. Katzaman, John Baumgardner

Proceedings of the International Conference on Creationism

Remnant magnetization in the Earth’s igneous rocks document that the Earth’s magnetic field reversed its polarity many times during the Genesis Flood. Previous creationist research has argued that strong convective buoyancy within the Earth’s liquid outer core during the Flood can cause the expulsion of magnetic flux outward from the core into the overlying mantle which produces rapid reversals of the Earth’s surface dipolar magnetic field. This poster reports the status of our efforts to model this dynamic process in 3D spherical geometry using a magnetohydrodynamic numerical solver.

Dynamic Recrystallization And Grain Size Effects On Catastrophic Motion Of The Earth’S Mantle During The Flood: Advancement Of Material Models, Heechen Cho, John Baumgardner, Maria Lee, Caleb Miller, Mark Horstemeyer

Proceedings of the International Conference on Creationism

This presentation reports a numerical study to investigate the mechanical effects of dynamic recrystallization (DRX) and the grain size on the speed of flow of rock inside the earth’s solid mantle during the Genesis Flood. The strength, or viscosity, of its constituent minerals is key to understanding and modeling the dynamics of the mantle correctly. A mineral’s strength is strongly influenced by the crystal size, its lattice defects (vacancies and dislocations), and other microscale and crystal-scale phenomena. Since the viscosity difference of the earth’s deep mantle between the present day and during the Flood cataclysm is approximately 10 orders of …

Tapping The Hourglass: Disequilibrium Relaxation Following Accelerated Nuclear Decay, Nathan Mogk

Proceedings of the International Conference on Creationism

In 2005, the Radioisotopes and the Age of The Earth (RATE) research initiative published compelling evidence for at least one episode of past radioactive decay which was accelerated by orders of magnitude compared with the rates measured in recent years. Constancy of radioactive decay rates is a central assumption in radiometric dating. Accelerated nuclear decay (AND) causes systematic change in the results of radiometric dating beyond the in situ above normal accumulation of daughter products. This includes relaxation of magma reservoirs to equilibrium and excessive inheritance arising from disequilibrium excesses of daughter products of greater order than crystal-melt partition ratios. …

Language, Coded Instructions And The Interaction With Thermodynamics, Andy C. Mcintosh

Proceedings of the International Conference on Creationism

The theme of the 9th ICC is Developing and Systematizing the Creation Model of Origins. Following this theme, the proposed paper seeks to establish a rigorous and systematic approach to the important area of information and its interface with the substrate on which the information is expressed. This must first involve the understanding of the laws of thermodynamics not only for isolated systems but for closed (where only energy is allowed to cross the boundary) and open systems (where both matter and energy are allowed to cross the boundary). This is particularly an issue with the second law of …

Cause Of Large Post-Flood Jump In Earth's Carbon 14, D Russell Humphreys

Proceedings of the International Conference on Creationism

Accelerated fusion in the Sun during the flood caused large post-flood jump in Earth’s ¹⁴C

D. Russell Humphreys

Creationists studying carbon-14 dating are generally aware of the need to have a large increase in Earth’s ¹⁴C/C ratio during the post-flood Ice Age (Oard, 2021), from about 0.5% of today’s ratio in fossils (Baumgardner, 2005) to more than 95% of today’s ratio by the time of Moses, 1500 B.C. Today cosmic-ray-generated neutrons hitting ¹⁴N nuclei in the atmosphere produce most of the ¹⁴C. With today’s influx of cosmic rays, it would take about 14,000 years to build …

Genealogical Vs Phylogenetic Mutation Rates: Answering A Challenge, Robert Carter

Proceedings of the International Conference on Creationism

There is a discrepancy between the mutation rate we can measure today and the rate at which evolution is supposed to have proceeded. The former is sometimes called the genealogical mutation rate, for it is obtained by comparing individuals whom we know to be related. The latter is sometimes called the phylogenetic mutation rate. It is calculated by counting the fixed differences between two species and dividing by the estimated time since their common ancestor. Genealogical mutation rates are generally several orders of magnitude faster than phylogenetic estimates. This causes problems for the evolutionary model. For example, using the genealogical …

Human Brain Function Above All Other And The Creation Model, James D. Johansen

Proceedings of the International Conference on Creationism

The human brain functions at a level beyond any other brain in all of creation. With mankind being made in the image of God, there must be signatures of this fact in its design. Modeling the human brain that develops an architectural framework offers the potential to unpack this reality. This premise offers a rich area to explore that expands the creation model to capture the engineering framework God used in creation. This paper will focus on brain neurons and neural networks using systems engineering modeling tools.

The systems modeling language (SysML) will be used to capture a model of …

A Rapid Ice Age And Transition To Ice Sheet Growth, Steven M. Gollmer

Proceedings of the International Conference on Creationism

For the past half-century, creationists have explored different explanations for glacial erosion features across the Northern Hemisphere. The best explanation to date is a single post-flood ice age with multiple surges. The challenge with this model is the limited time available between the end of the Flood and the time of Abraham, which appears to be post ice age. Oard (1979) proposed a short post-flood ice age developing due to warm oceans, volcanic aerosols, and barren surfaces. Performing computer climate simulations, Spelman (1996), Vardiman (1998), Gollmer (2013), and Gollmer (2018) verified that enhance precipitation occurs at higher latitudes due to …

Interactive Water Vortex Exhibit, Simon Way, Emily Laing, Roqaya Naseri, Makenzie Kan

Mechanical Engineering

The San Luis Obispo Children’s Museum requested an interactive water vortex exhibit to both engage and entertain inquisitive guests, ages two to eight. The goal was to design and manufacture an exhibit that would educate its users on the fluid mechanics behind water vortices. They activate the mechanics by spinning a wheel, which is perceived as the catalyst to manipulate the flow of water to successfully create a whirlpool. Our team has created an interactive display that will enlighten young minds, providing the museum with an educational exhibit which shares a concept not currently taught by any other. Our project …

Atomic-Level Mechanisms Of Fast Relaxation In Metallic Glasses, Leo W. Zella

Doctoral Dissertations

Glasses are ubiquitous in daily life and have unique properties which are a consequence of the underlying disordered structure. By understanding the fundamental processes that govern these properties, we can modify glasses for desired applications. Key to understanding the structure-dynamics relationship in glasses is the variety of relaxation processes that exist below the glass transition temperature. Though these relaxations are well characterized with macroscopic experimental techniques, the microscopic nature of these relaxations is difficult to elucidate with experimental tools due to the requirements of timescale and spatial resolution. There remain many questions regarding the microscopic nature of relaxation in glass …

Analyzing The Effects Of Ultrafast Laser Processing On Mechanical Properties Of 3d-Printed Pla Parts, Darshan Pramodbhai Yadav

Theses and Dissertations

Recent advances in additive manufacturing technologies have already led to wide-scale adoption of 3D-printed parts in various industries. The expansion in choice of materials that can be processed, particularly using Fused Deposition Modeling (FDM), and the steady advancements in dimensional accuracy control have extended the range of applications far beyond rapid prototyping. However, additive manufacturing still has considerable limitations compared to traditional and subtractive manufacturing processes. This work addresses limitations associated with the as-deposited surface roughness of 3D-printed parts. The effects of roughness-induced stress concentrations were studied on ultimate tensile strength and fatigue life. The samples were manufactured using a …

Viability Of Magnetic Nanoparticles For Magnetic Hyperthermia Cancer Therapy, Marcos Adrian Garcia

Open Access Theses & Dissertations

Over the last few decades magnetic nanoparticles have gained an extraordinary amount of attention in the science community. Their versatile use in many different research areas such as medicine, engineering and technology and many other areas has made them a popular subject. In this thesis, the synthesis of different systems of magnetic nanoparticles will be explored along with the potential use of the MNP's as viable candidates for Magnetic Hyperthermia Cancer Therapy. With values of over 200 emu/g for Iron-Silver magnetic nanoparticles with particle sizes ranging from 30-70nm and their heating properties under an AC magnetic field. As well of …

Radiation Exposure Calibration Of The Al2o3:C With Radium-226 And Cesium-137 Using The Osl Method, Selma Tepeli Aydin

All Theses

Optically stimulated luminescence (OSL) dosimetry was utilized to calibrate Al₂O₃:C powder dosimeters, available commercially as the nanoDot® from Landauer Inc., and compare the dosimeter response to radium-226 (²²⁶Ra) and cesium-137 (¹³⁷Cs). The signal from the OSL was quantified using a microSTARii^® OSL reader also produced by Landauer Inc. Dose-response curves were developed for ²²⁶Ra and ¹³⁷Cs experiments (5 dosimeters each) at thirteen absorbed doses. Individual dosimeter response was tracked by serial number. Linear regression analysis was performed to determine if there were significant differences between the intercepts of the …

Characterization Of Interlayer Laser Shock Peening During Fused Filament Fabrication Of Polylactic Acid (Pla), Fabien Denise

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The field of additive manufacturing (AM) has gained a significant amount of popularity due to the increasing need for more sustainable manufacturing techniques and the adaptive development of complex product geometries. The problem is that AM parts routinely exhibit flaws or weaknesses that affect functionality or performance. Over the years, surface treatments have been developed to compensate certain flaws or weaknesses in manufactured products. Combining surface treatments with the modularity of additive manufacturing could lead to more adaptable and creative improvements of product functions in the future. The current work evaluates the feasibility of pursuing a new research axis in …

Directional Microwave Emission From Femtosecond-Laser Illuminated Linear Arrays Of Superconducting Rings, Thomas J. Bullard, Kyle Frische, Charlie Ebbing, Stephen J. Hageman, John Morrison, John Bulmer, Enam A. Chowdury, Michael L. Dexter, Timothy J. Haugan, Anil K. Patniak

Faculty Publications

We examine the electromagnetic emission from two photo-illuminated linear arrays composed of inductively charged superconducting ring elements. The arrays are illuminated by an ultrafast infrared laser that triggers microwave broadband emission detected in the 1–26 GHz range. Based on constructive interference from the arrays a narrowing of the forward radiation lobe is observed with increasing element count and frequency demonstrating directed GHz emission. Results suggest that higher frequencies and a larger number of elements are achievable leading to a unique pulsed array emitter concept that can span frequencies from the microwave to the terahertz (THz) regime.

Controlled Manipulation And Transport By Microswimmers In Stokes Flows, Jake Buzhardt

All Dissertations

Remotely actuated microscale swimming robots have the potential to revolutionize many aspects of biomedicine. However, for the longterm goals of this field of research to be achievable, it is necessary to develop modelling, simulation, and control strategies which effectively and efficiently account for not only the motion of individual swimmers, but also the complex interactions of such swimmers with their environment including other nearby swimmers, boundaries, other cargo and passive particles, and the fluid medium itself. The aim of this thesis is to study these problems in simulation from the perspective of controls and dynamical systems, with a particular focus …

Patterned Heating Induced Propulsion, Saajid A. Aman

Electronic Thesis and Dissertation Repository

This study explores propulsion effects generated by patterned heating acting on smooth and corrugated surfaces. The model problem assumes that the upper plate moves freely, and the lower plate is stationary, equipped with grooves, and exposed to spatially distributed heating. Our findings identify two distinct propulsion effects: thermal streaming and thermal drift. Thermal streaming occurs when given sufficient heating intensity with net flow in the left or right direction characterized by a pitchfork bifurcation. The efficiency of this technique can be controlled using the wavelength of heating. Thermal drift represents a pattern interaction effect. Its strength depends on the relative …

Dynamics And Scaling Of Particle Streaks In High-Reynolds-Number Turbulent Boundary Layers, Tim Berk, Filippo Coletti

Mechanical and Aerospace Engineering Faculty Publications

Inertial particles in wall-bounded turbulence are known to form streaks, but experimental evidence and predictive understanding of this phenomenon is lacking, especially in regimes relevant to atmospheric flows. We carry out wind tunnel measurements to investigate this process, characterizing the transport of microscopic particles suspended in turbulent boundary layers. The friction Reynolds number Re_𝜏 = O(10⁴) allows for significant scale separation and the emergence of large-scale motions, while the range of viscous Stokes number St⁺ = 18–870 is relevant to the transport of dust and fine sand in the atmospheric surface layer. We …

Thermal Conductivity And Mechanical Properties Of Interlayer-Bonded Graphene Bilayers, Afnan Mostafa

Masters Theses

Graphene, an allotrope of carbon, has demonstrated exceptional mechanical, thermal, electronic, and optical properties. Complementary to such innate properties, structural modification through chemical functionalization or defect engineering can significantly enhance the properties and functionality of graphene and its derivatives. Hence, understanding structure-property relationships in graphene-based metamaterials has garnered much attention in recent years. In this thesis, we present molecular dynamics studies aimed at elucidating structure-property relationships that govern the thermomechanical response of interlayer-bonded graphene bilayers.

First, we present a systematic and thorough analysis of thermal transport in interlayer-bonded twisted bilayer graphene (IB-TBG). We find that the introduction of interlayer C-C …

Effect Of Hf Alloying On Magnetic, Structural, And Magnetostrictive Properties In Feco Films For Magnetoelectric Heterostructure Devices, Thomas Mion, Margo Staruch, Konrad Bussmann, Goran Karapetrov, Olaf Van 'T Erve, Sara Mills, Heonjune Ryou, Ramasis Goswami, Patrick G. Callahan, David J. Rowenhorst, Syed B. Qadri, Samuel Lofland, Peter Finkel

Faculty Scholarship for the College of Science & Mathematics

Materials with high magnetoelectric coupling are attractive for use in engineered multiferroic heterostructures with applications such as ultra-low power magnetic sensors, parametric inductors, and non-volatile random-access memory devices. Iron-cobalt alloys exhibit both high magnetostriction and high saturation magnetization that are required for achieving significantly higher magnetoelectric coupling. We report on sputter-deposited (Fe0.5Co0.5)1-xHfx (x = 0 - 0.14) alloy thin films and the beneficial influence of Hafnium alloying on the magnetic and magnetostrictive properties. We found that co-sputtering Hf results in the realization of the peening mechanism that drives film stress from highly tensile to slightly compressive. Scanning electron microscopy and …