Engineering Commons^™

Energy-Efficient Self-Organization Protocols For Sensor Networks, Qingwen Xu

Computer Science Theses & Dissertations

A Wireless Sensor Network (WSN, for short) consists of a large number of very small sensor devices deployed in an area of interest for gathering and delivery information. The fundamental goal of a WSN is to produce, over an extended period of time, global information from local data obtained by individual sensors. The WSN technology will have a significant impact on a wide array of applications on the efficiency of many civilian and military applications including combat field surveillance, intrusion detection, disaster management among many others. The basic management problem in the WSN is to balance the utility of the …

The Effect Of Cu-Doping On The Magnetic And Transport Properties Of La₀.₇Sr₀.₃Mno₃, M. S. Kim, Jinbo Yang, Qingsheng Cai, X.-D. Zhou, William B. Yelon, Paul Ernest Parris, William Joseph James

Physics Faculty Research & Creative Works

The effects of Cu-doping on the structural, magnetic, and transport properties of La0.7Sr0.3Mn1xCuxO3 (0<=x<=0.20) have been studied using neutron diffraction, magnetization, and magnetoresistance (MR) measurements. All samples show the rhombohedral structure with the R[overline 3]c space-group from 10 K to room temperature (RT). Neutron diffraction data suggest that some of the Cu ions have a Cu3+ state in these compounds. The substitution of Mn by Cu affects the MnO bond length and Mn-O-Mn bond angle resulting from the minimization of the distortion of the MnO6 octahedron. Resistivity measurements show that a metal to insulator transition occurs for the x>=0.15 samples. The x=0.15 sample shows the highest MR([approximate]80%), which might result from the co-existence of Cu3-Cu2+ and the dilution effect of Cu-doping on the double exchange interaction

A Robust Controller For The Manipulation Of Micro Scale Objects, Qinmin Yang, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

A suite of novel robust controllers is presented for the manipulation and handling of micro-scale objects in a micro-electromechanical system (MEMS) where adhesive, surface tension, friction and van der Waals forces are dominant. Moreover, these forces are typically unknown. The robust controller overcomes the unknown system dynamics and ensures the performance in the presence of actuator constraints by assuming that the upper bounds on these forces are known. On the other hand, for the robust adaptive controller, the unknown forces are estimated online. Using the Lyapunov approach, the uniformly ultimate boundedness (UUB) of the closed-loop manipulation error is shown for …

Melting And Solidification Study Of Indium And Bismuth Nanocrystals Using Reflection High-Energy Electron Diffraction, Mohamed K. Zayed

Electrical & Computer Engineering Theses & Dissertations

As technology begins to utilize nanocrystals for many chemical, biological, medical, electrical, and optoelectrical applications, there is a growing need for an understanding of their fundamental properties. The study of melting and solidification of nanocrystals is of interest to fundamental understanding of the effect of reduced size and crystal shape on the solid-liquid phase transition. Melting and solidification of as-deposited and recrystallized indium and bismuth nanocrystals were studied using reflection high-energy electron diffraction (RHEED). The nanocrystals were thermally deposited on highly oriented 002-graphite substrate at different deposition temperatures. The growth dynamics of the nanocrystals was studied using in situ RHEED …

Adaptive Replication And Access Control Of Multimedia Data In A P2p Environment, Sanjay Kumar Madria, Sanjeev Agarwal

Computer Science Faculty Research & Creative Works

This paper explores some of the ideas and solutions related to replication and access control of multimedia data in a hierarchical P2P environment. We provided overview of the techniques to generate multiresolution of multimedia data and explored error recovery and access control issues.

Energy-Efficient Rate Adaptation Mac Protocol For Ad Hoc Wireless Networks, Maciej Jan Zawodniok, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

Resource constraints in ad hoc wireless networks require that they are energy efficient during both transmission and rate adaptation. In this paper, we propose a novel energy-efficient rate adaptation protocol that selects modulation schemes online to maximize throughput based on channel state while saving energy. This protocol uses the distributed power control (DPC) algorithm (M. Zawodniok et al., 2004) to accurately determine the necessary transmission power and to reduce the energy consumption. Additionally, the transmission rate is altered using energy efficiency as a constraint to meet the required throughput, which is estimated with queue fill ratio. Moreover, back-off scheme is …

Synthesis Of Gold Nanoparticles Attached To Polypyrrole Nanofibers, Sunil K. Pillalamarri, Frank D. Blum, Massimo F. Bertino

Chemistry Faculty Research & Creative Works

Polypyrrole is a frequently studied conducting polymer due to its application in sensing and catalysis.1 Polypyrrole is considered among the most promising conductive polymers due to its stability and ease of conversion between conducting and insulating forms.2 Different chemical and electrochemical methods are generally used in the synthesis of polypyrrole.2 Despite many interesting applications, the use of polypyrrole is limited because of difficulty in processing it. Several approaches have been explored to improve the ability to process polypyrrole, including the use of emulsion, inverse emulsion, steric stabilizer, and microemulsion methods.1 Several reports have also been published on the synthesis of …

Copolymers And Blends Of Methyl Acrylate And Acrylic Isobutyl Poss Nanomaterials, Manikantan B. Nair, Frank D. Blum

Chemistry Faculty Research & Creative Works

Ultra-thin polymer films attached to solid substrates (supported films) have attracted significant interest in recent years. Supported films are used in the design of advanced materials like photoresists, lubricants and other electronic devices. Glass transition temperatures (Tgs) of supported polymer films have also been of significant interest. The Tg has been shown to depend on the thickness of the polymer film on the surface and the inherent nature of the surface. The effect of end-grafting of a polymer chain to a surface, on the Tg of the polymer has been studied previously.1 Reports on the study of glass transition behaviors …

Fourier Transform Infrared Analysis Of Hydroxyl Content Of Hydrothermally Processed Heteroepitaxial Barium Titanate Films, Sandeep K. Patil, Nipun Shah, Frank D. Blum, M. N. Rahaman

Chemistry Faculty Research & Creative Works

The concentration of hydroxyl (-OH) groups in epitaxial barium titanate (BaTiO3) films (thickness ≈ 200 nm), deposited on single-crystal strontium titanate (SrTiO3) at 150 °C by a hydrothermal technique, was investigated using x-ray photoelectron spectroscopy and Fourier transform infrared (FTIR) spectroscopy. After hydrothermal treatment, a broad FTIR resonance for the hydroxyl groups indicated a significant concentration of surface -OH groups in the films. The as-deposited films were subsequently treated hydrothermally with D2O, and the kinetics of the exchange reaction between -OH incorporated into the film and -OD from the D2O were studied using FTIR. For reactions carried out intermittently, the …

Deuterium Nmr Studies Of Segmental Dynamics Of Anopore-Adsorbed Poly(Methyl Acrylate), Macduff O. Okuom, Frank D. Blum

Chemistry Faculty Research & Creative Works

Studies of segmental dynamics of polymers at interfaces provide a basis for understanding the properties of composite materials. Interfacial phenomena in multi-phase systems need to be understood as devices made from multi-phase polymeric systems become smaller. Various techniques have been used to investigate interfacial polymers at the air-polymer-solid interface; for example, ellipsometry,1 X-ray,2 and neutron reflectometry.3 These techniques typically characterize the structure (often the thickness) of the polymer layer and are normally used to determine the glass-transition temperature (Tg) through a break in the thicknesstemperature curve. There have been a few reports where the dynamics of polymers at the surface-air …

Effect Of Plasticizer On Pvac-D3 Dynamics Using 2h Solid-State Nmr, Rakesh R. Nambiar, Frank D. Blum

Chemistry Faculty Research & Creative Works

Poly(vinyl acetate) (PVAc) is an important polymer for use in many applications due to its various bulk and surface characteristics. The structure of poly(vinyl acetate) results in a relatively low glass transition temperature (Tg) and makes it important for processing and applications such as paints, adhesives, thin films and surface coatings. Poly(vinyl acetate) can also be easily plasticized, widening its range of applications. The term "plasticizer" refers to a species that will decrease Tg of a polymer.1 Polymer-plasticizer systems have been studied for years and continue to be of current interest. The effects of polymer-plasticizer interactions2 and plasticizer structure3 on …

Estimation Of Bound Carbonyls In Pmma-R-Ps Copolymers Adsorbed On Silica, Pavan K. Challa, Bing Zhang, Frank D. Blum

Chemistry Faculty Research & Creative Works

The adsorption of random copolymers on solid surfaces is essential for developing good properties in composite materials. A good control and understanding of interfaces allows tuning of the properties of the individual components. Interfacial polymers are important in many industrial applications such as photoresists, protective coatings, metal insulator and semi-conductor insulator junctions, metal-filled polymer composites and polymer-lined metal containers for protective food packaging. The effect of the drying process,1 configuration and tacticity,2 molecular mass, density of surface hydroxyls,3 and adsorbed amounts4 have already been studied for interfacial polymers. The thermal characterization for polystyrene,5 PMMA11 and PMMA-r- PS6 copolymers adsorbed on …

Nmr And Modulated Differential Scanning Calorimetry Of Adsorbed Poly(Methyl Acrylate) On Silica, Frank D. Blum, Burak Metin

Chemistry Faculty Research & Creative Works

The interaction between polymers and solid substrates can be studied by a variety of techniques. The results from different experiments can be affected by the nature of the polymer, surface, polymer-surface interactions and, also, the experiment. A great deal has been learned about the behavior of polymers at interfaces, but there is also much to be learned about the interactions and how they affect the physical properties of adsorbed polymers. In the present study, we report both deuterium nuclear magnetic resonance (NMR) and modulated differential scanning calorimetry (MDSC) of poly(methyl acrylate) (PMA) adsorbed on Cab-O-Sil silica. The focus of this …

Segmental Dynamics In Poly(Methyl Acrylate)-D3 On Strongly And Weakly Adsorbing Silica Surfaces, Burak Metin, Frank D. Blum

Chemistry Faculty Research & Creative Works

The segmental dynamics of a polymer on a solid surface appears to be significantly different than that in bulk. The strength of the interaction between polymer segments and a solid surface is likely to be an important factor affecting the segmental mobility of the polymers. Studies of polymers on a weakly adsorbing surface would provide additional understanding of their motional characteristics on surfaces. In a recent NMR study by Rivillon et al., chain dynamics was seen to be different for samples, even when there was no specific interaction with the surface. Peanasky et al. have found a restricted segmental dynamics …

Coupled Electrical And Magnetic Properties In (La,Sr)Feo3-Δ, X.-D. Zhou, Qingsheng Cai, Jinbo Yang, M. S. Kim, William B. Yelon, William Joseph James, Y.-W. Shin, B. J. Scarfino, Harlan U. Anderson

Materials Science and Engineering Faculty Research & Creative Works

This article is aimed at studying the temperature dependence oxygen nonstoichiometry, magnetic moments, Fe³⁺ fraction, Néel temperature and conductivity of (La,Sr)FeO_3-δ. It is found that the magnetic properties in La_0.60 Sr_0.40 Fe_3-δ is determined by Fe³⁺ and its concentration, and the conductance is resulted from Fe⁴⁺ ions, which act as electron holes. Both of magnetic and electrical properties were directly governed by oxygen nonstoichiometry (δ). when δ=0.2, the compound has maximum Fe³⁺, the saturation magnetic moments and Néel temperature are 3.8 µB and 410 °C, both at the highest level, …

Neural Network-Based Control Of Nonlinear Discrete-Time Systems In Non-Strict Form, Jagannathan Sarangapani, Zheng Chen, Pingan He

Electrical and Computer Engineering Faculty Research & Creative Works

A novel reinforcement learning-based adaptive neural network (NN) controller, also referred as the adaptive-critic NN controller, is developed to deliver a desired tracking performance for a class of non-strict feedback nonlinear discrete-time systems in the presence of bounded and unknown disturbances. The adaptive critic NN controller architecture includes a critic NN and two action NNs. The critic NN approximates certain strategic utility function whereas the action neural networks are used to minimize both the strategic utility function and the unknown dynamics estimation errors. The NN weights are tuned online so as to minimize certain performance index. By using gradient descent-based …

Study Of The Electronic Structure Of Cafeo₃, Jinbo Yang, M. S. Kim, Qingsheng Cai, X.-D. Zhou, Harlan U. Anderson, William Joseph James, William B. Yelon

Materials Science and Engineering Faculty Research & Creative Works

We have studied the charge disproportionation phenomenon in CaFeO3 using the local-spin density approximation with the on-site Coulomb interaction parameter U and exchange parameter J. The calculation reveals that the total number of the 3d electrons is about 5.1 for both Fe(1)(Fe5+) and Fe(2)(Fe3+) atoms, and that there are about 0.25 electron holes in the O-2p band. Therefore, the charge disproportionation can be more accurately described as 2d5L(Fe4+)=d5L2(Fe5+)+d5(Fe3+), where L denotes a hole in the oxygen 2p band, instead of 2d4(Fe4+)=d3(Fe5+)+d5(Fe3+). The hybridization between the Fe-3d and O-2p orbitals is stronger for Fe(1) than for Fe(2) due to the shorter …

Decentralized Discrete-Time Neural Network Controller For A Class Of Nonlinear Systems With Unknown Interconnections, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

A novel decentralized neural network (NN) controller in discrete-time is designed for a class of uncertain nonlinear discrete-time systems with unknown interconnections. Neural networks are used to approximate both the uncertain dynamics of the nonlinear systems and the unknown interconnections. Only local signals are needed for the decentralized controller design and the stability of the overall system can be guaranteed using the Lyapunov analysis. Further, controller redesign for the original subsystems is not required when additional subsystems are appended. Simulation results demonstrate the effectiveness of the proposed controller. The NN does not require an offline learning phase and the weights …

Predictive Congestion Control Mac Protocol For Wireless Sensor Networks, Maciej Jan Zawodniok, Jagannathan Sarangapani

Electrical and Computer Engineering Faculty Research & Creative Works

Available congestion control schemes, for example transport control protocol (TCP), when applied to wireless networks results in a large number of packet drops, unfairness with a significant amount of wasted energy due to retransmissions. To fully utilize the hop by hop feedback information, a suite of novel, decentralized, predictive congestion control schemes are proposed for wireless sensor networks in concert with distributed power control (DPC). Besides providing energy efficient solution, embedded channel estimator in DPC predicts the channel quality. By using the channel quality and node queue utilizations, the onset of network congestion is predicted and congestion control is initiated. …

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead-Alloys Coolant Systems, Yitung Chen

Transmutation Sciences Materials (TRP)

The goal of the proposed research project is to provide basic understanding of the protective oxide layer behaviors and to develop oxide layer growth models of steels in non-isothermal lead-alloys (lead or lead-bismuth eutectic) coolant systems. It is widely recognized that the corrosiveness of the lead-alloys is a critical obstacle and challenge for which it can be safely used or applied in the nuclear coolant systems. Active oxygen control technique can promote the formation of the “self-healing” oxide films on the structural material surface, drastically reducing steel corrosion and coolant contamination. Many experiments of steels exposed to flowing lead-alloys have …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design: Quarterly Report October 1-December 31, 2004, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The Advanced Fuel Cycle Initiative (AFCI) and Transmutation Research Program- University Participation Program (TRP-UPP) supported by Department of Energy of the United States have been developing many important technologies for the transmutation of nuclear waste to address long-term disposal issues. While successfully embedding AMUSE module into a dedicated System Engineering Model (TRPSEMPro), developed by the Nevada Center for Advanced Computational Methods (NCACM) at the University of Nevada, Las Vegas collaborating with Argonne National Laboratory (ANL), ANL is interested in further simulating the Light Water Reactor (LWR) Spent Fuel Treatment Facility (SFTF) combining commercial process simulation and analysis packages and core …

Short-Term Scheduling Of A Hydro-Thermal System Using Linear Programming Technique, A Kyaruzi

Tanzania Journal of Engineering and Technology (TJET)

The paper discusses the short term scheduling of Hydrothermal for Tanzania Electricity Supply Company (TANESCO) Power System. The problem is to determine on hourly interval the Hydro and Thermal generation. The scheduling keeps balance between production and consumption in a reliable and economical way during the study period. Linear programming (LP) mathematical model using MATL4B has been developed. The constraints are hydrological balance, thermal power plants limitations and load requirements. The result from LP solution gave low operation cost. Generation was mainly from hydro and all reservoirs elevation was high at the end ofplanning period.

Comparative Study Of The Dynamics Of Circulating Fluidized Bed Riser And Downer Of Equal Diameters, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

The microscopic flow dynamics of the 100-mm internal diameter riser/downer circulating fluidized bed (CFB) unit were monitored using a solids concentration fiber optic probe. The comparison was conducted by comparing radial profiles Of the dynamic parameters derived from time-series analysis techniques (statistical and chaos analyses). The solids concentration signals used were recorded under similar operating conditions (gas velocity of 8.0 m/s and solids flux of 100 kg/m2s). Similar axial elevations were compared (entrance and fully developed sections of die reactors). A1 each loca!ion, the signals were sampled a! afrequency of 970 Hz for duration of 30 seconds. It was observed …

Information And Communication Technology Applications In The Tanzanian Health Sector, M Victor

Tanzania Journal of Engineering and Technology (TJET)

The potential role of Information and Communication Technology (ICT) in the health sector is to improve the delivery of health services and would also help to deal with major constraints in uplifting the health standards Of Tanzanians. ICT in heath can be used to facilitate remote consultation, diagnosis and treatment. The objective Of the study was exploratory in nature and aimed at determining the awareness level of the länzanian health sector on various ICT applications which could be used in the sector. The study also aimed ar establishing the challenges to the implementation of ICT in the Tanzanian health sector. …

Assessment Of The Accuracy Of Approximate Methods In The Analysis Of Plane Frame Structures, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

pproximaic methods of analysis are widely used in the analysis OJ' frames for preliminary design due to their simplicily as compared to exact analysis meth o ds Ough they a re nol as accurate. In this paper. the methods Of hinges and portal frame are described and have been used to analyze a statically indeterminate frame by taking inro account the bending stiffness of the frame members. The obtained results are comparable Io the magnitudes of forces determined by exact methods Of analysis.

Minimum Power Configuration In Wireless Sensor Networks, Guoliang Xing, Chenyang Lu, Ying Zhang, Qingfeng Huang, Robert Pless

All Computer Science and Engineering Research

This paper proposes the minimum power configuration (MPC) approach to energy conservation in wireless sensor networks. In sharp contrast to earlier research that treats topology control, power-aware routing, and sleep management in isolation, MPC integrates them as a joint optimization prob-lem in which the power configurationof a network consists of a set of active nodes and the transmission powers of the nodes. We show through analysis that the minimum power configu-ration of a network is inherently dependent on the data rates of sources. We propose several approximation algorithms with provable performance bounds compared to the optimal solu-tion, and a practical …

Niel Calculations For High-Energy Heavy Ions, John W. Wilson, I. Jun, M. A. Xapsos, E. A. Burke, F. F. Badavi, L. W. Townsend

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Calculations of NIEL are reported for heavy ions prominent in the space environment for energies ranging from 200 MeV per nucleon to 2 GeV per nucleon.

Comparison Of Sampling Methods For Flatness Evaluation Using Cmm, Ashish Singhal

All-Inclusive List of Electronic Theses and Dissertations

Efficient part feature verification using Coordinate Measuring Machine (CMM) requires efficient sample point selection as well as accurate zone fitting. This work deals with flatness tolerance evaluation and the Least- Square (LS) technique is used to compute tolerance zone. In regard to the sampling strategy there are several methods commonly employed in Coordinate Measuring Machine inspection literature. The appropriate method is selected according to the accuracy requirement, the geometry features of the work piece, and the condition of the machine producing the work piece. This research focuses on the five sampling methods: Hammersley sequence sampling, Halton-Zaremba sequence sampling, Random sampling, …

Nichtmonotone, Neuro-Symbolische Und Begriffliche Wissensverarbeitung, Pascal Hitzler

Computer Science and Engineering Faculty Publications

Diese Schrift dient dem Bericht uber die Hauptaspekte meiner Forschertatigkeit an der TU Dresden seit der Promotion. In diesen dreieinhalb Jahren war es mein Bestreben, selbststandig aktuelle, theoretisch fundierte und anwendungsbezogene Fragestellungen zu entwickeln und zu verfolgen.

Naturgemaß war meine Forschung in dieser Zeit vor allem zu Anfang sehr explorativ. Meine Suche konzentrierte sich dabei auf das Herausarbeiten theoretischer Zusammenhange. Ob ich einen Ansatz dann weiterverfolgte entschied sich anschließend aufgrund einer Evaluation aus angewandter Sicht.

Die in dieser Schrift dargestellten Forschungsansatze gedenke ich in Zukunft fortzufuhren. Sie bilden die Keimzellen fur langfristig angelegte angewandte und theoretische Untersuchungen. Ich werde in …

Using Fine-Grained Cycle Stealing To Improve Throughput, Efficiency And Response Time On A Dedicated Cluster While Maintaining Quality Of Service, Gary Stiehr

All Computer Science and Engineering Research

For various reasons, a dedicated cluster is not always fully utilized even when all of its processors are allocated to jobs. This occurs any time that a running job does not use 100% of each of the processors allocated to it. Keeping in mind the needs of both the cluster’s system administrators and its users, we would like to increase the throughput and efficiency of the cluster while maintaining or improving the average turnaround time of the jobs and the quality of service of the “primary” jobs originally scheduled on the cluster. To increase the throughput and efficiency of the …