Engineering Commons^™

Design And Analysis Of A Process For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Yitung Chen, Darrell Pepper, Randy Clarksean

Fuels Campaign (TRP)

The goal of this project is to investigate the casting processes for metallic fuels to help design a process that minimizes the loss of the volatile actinide elements from the fuel. The research effort centers on the development of advanced numerical models to assess conditions that significantly impact the transport of volatile actinides during the melt casting process and represents a joint effort between researchers at UNLV and Argonne National Laboratory (ANL). Assessing critical equipment and process variables is required to build a successful system that will operate efficiently.

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The goal of this research project was to provide technical support to process designers working on the development of the fuel cycles for transmutation applications. Detailed process models were developed to better define the impact of fuel choice on the transmuter fuel cycle, including relative process losses, waste generation, and plant capital cost. These process models provide insight regarding required plant size and number of plants needed to mesh with the fuel recycling line. They also determine requirements for automation.

Manufacturing models for large-scale production in a hot cell environment were also developed. Combined, these two models allow the assessment …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 2nd Quarter Report, 2005, Clemens Heske

Fuels Campaign (TRP)

The goal of our project is to investigate interface corrosion processes in TRISO nuclear fuel particles. For this purpose, we are undertaking a detailed study of the interface formation between potential candidates for metallic fission products (Pd, Ag, and Cs), likely to diffuse from the kernel of the TRISO particles, with the TRISO coating layers. As a starting point, we are investigating the Pd/SiC interface and will extend our studies to Ag/SiC during our current summer research campaign. The experimental approach comprises the preparation of metal/SiC interfaces in-situ in our ultra-high vacuum system by electron-beam deposition. In order to understand …

Interaction Between Metal Fission Products And Triso Coating Materials: A Study Of Chemical Bonding And Interdiffusion: 1st Quarter Report, 2005, Clemens Heske

Fuels Campaign (TRP)

In this project we utilize a combination of state-of-the-art soft X-ray spectroscopies to understand the chemical bonding between metal fission products (Pd and Ag) with coating layers in TRISO fuel particles (SiC and pyrocarbon). We are primarily focusing on an analysis of intermediate chemical phases at the interface, the intermixing/diffusion behavior, and the electronic interface structure as a function of material choice (metal and coating materials), temperature, and external stress. In the current first project year, we are beginning these investigations with the Pd/SiC interface, as discussed in the previous two quarterly reports. Our first experiments (both using our lab …

Interaction Between Metal Fission Products And Triso Coating Materials, Clemens Heske

Fuels Campaign (TRP)

The goal of this project is to elucidate the chemical bonding and interface formation of metal fission products with the coating materials used in state-of-the-art TRISO fuel particles. Particular emphasis is placed on an analysis of intermediate chemical phases at the interface, the intermixing/diffusion behavior, and the electronic interface structure as a function of material choice (metal and coating materials), temperature, and external stress. Furthermore, the chemical state of some of the metal fission products will be assessed.

This project studies the interface formation of Pd, Ag, and Cs with SiC and pyrolytic carbon. Using the TRISO coating materials (and …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing, Georg F. Mauer

Fuels Campaign (TRP)

The safe and effective manufacturing of actinide-bearing fuels for any transmutation strategy requires that the entire manufacturing process be contained within a shielded hot cell environment. To ensure that the fabrication process is feasible, the entire process must be designed for remote operation. The equipment must be reliable enough to perform over several decades, and also easy to maintain or repair remotely. The facility must also be designed to facilitate its own decontamination and decommissioning. In addition to these design factors, the potential viability of any fuel fabrication process will also be impacted by a number of variables, such as …

Transient Non-Linear Heat Conduction Solution By A Dual Reciprocity Boundary Element Method With An Effective Posteriori Error Estimator, Eduardo Divo, Alain J. Kassab

Publications

A Dual Reciprocity Boundary Element Method is formulated to solve non-linear heat conduction problems. The approach is based on using the Kirchhoff transform along with lagging of the effective non-linear thermal diffusivity. A posteriori error estimate is used to provide effective estimates of the temporal and spatial error. A numerical example is used to demonstrate the approach.

Design And Assessment Of Compact Optical Systems Towards Special Effects Imaging, Vesselin Chaoulov

Electronic Theses and Dissertations

A main challenge in the field of special effects is to create special effects in real time in a way that the user can preview the effect before taking the actual picture or movie sequence. There are many techniques currently used to create computer-simulated special effects, however current techniques in computer graphics do not provide the option for the creation of real-time texture synthesis. Thus, while computer graphics is a powerful tool in the field of special effects, it is neither portable nor does it provide work in real-time capabilities. Real-time special effects may, however, be created optically. Such approach …

Tunable Liquid Crystal Photonic Devices, Yun-Hsing Fan

Electronic Theses and Dissertations

Liquid crystal (LC)-based adaptive optics are important for information processing, optical interconnections, photonics, integrated optics, and optical communications due to their tunable optical properties. In this dissertation, we describe novel liquid crystal photonic devices and their fabrication methods. The devices presented include inhomogeneous polymer-dispersed liquid crystal (PDLC), polymer network liquid crystals (PNLC) and phase-separated composite film (PSCOF). Liquid crystal/polymer composites could exist in different forms depending on the fabrication conditions. In Chap. 3, we demonstrate a novel nanoscale PDLC device that has inhomogeneous droplet size distribution. In such a PDLC, the inhomogeneous droplet size distribution is obtained by exposing the …

Formalization Of Input And Output In Modern Operating Systems: The Hadley Model, Matthew Gerber

Electronic Theses and Dissertations

We present the Hadley model, a formal descriptive model of input and output for modern computer operating systems. Our model is intentionally inspired by the Open Systems Interconnection model of networking; I/O as a process is defined as a set of translations between a set of computer-sensible forms, or layers, of information. To illustrate an initial application domain, we discuss the utility of the Hadley model and a potential associated I/O system as a tool for digital forensic investigators. To illustrate practical uses of the Hadley model we present the Hadley Specification Language, an essentially functional language designed to allow …

System Design And Optimization Of Optical Coherence Tomography, Avni Ceyhun Akcay

Electronic Theses and Dissertations

Optical coherence imaging, including tomography (OCT) and microscopy (OCM), has been a growing research field in biomedical optical imaging in the last decade. In this imaging modality, a broadband light source, thus of short temporal coherence length, is used to perform imaging via interferometry. A challenge in optical coherence imaging, as in any imaging system towards biomedical diagnosis, is the quantification of image quality and optimization of the system components, both a primary focus of this research. We concentrated our efforts on the optimization of the imaging system from two main standpoints: axial point spread function (PSF) and practical steps …

Interferometry-Based Free Space Communication And Information Processing, Muzamil Arshad Arain

Electronic Theses and Dissertations

This dissertation studies, analyzes, and experimentally demonstrates the innovative use of interference phenomenon in the field of opto-electronic information processing and optical communications. A number of optical systems using interferometric techniques both in the optical and the electronic domains has been demonstrated in the filed of signal transmission and processing, optical metrology, defense, and physical sensors. Specifically it has been shown that the interference of waves in the form of holography can be exploited to realize a novel optical scanner called Code Multiplexed Optical Scanner (C-MOS). The C-MOS features large aperture, wide scan angles, 3-D beam control, no moving parts, …

Network Intrusion Detection: Monitoring, Simulation And Visualization, Mian Zhou

Electronic Theses and Dissertations

This dissertation presents our work on network intrusion detection and intrusion sim- ulation. The work in intrusion detection consists of two different network anomaly-based approaches. The work in intrusion simulation introduces a model using explicit traffic gen- eration for the packet level traffic simulation. The process of anomaly detection is to first build profiles for the normal network activity and then mark any events or activities that deviate from the normal profiles as suspicious. Based on the different schemes of creating the normal activity profiles, we introduce two approaches for intrusion detection. The first one is a frequency-based approach which …

Optical Wave Propagation In Discrete Waveguide Arrays, Jared Hudock

Electronic Theses and Dissertations

The propagation dynamics of light in optical waveguide arrays is characteristic of that encountered in discrete systems. As a result, it is possible to engineer the diffraction properties of such structures, which leads to the ability to control the flow of light in ways that are impossible in continuous media. In this work, a detailed theoretical investigation of both linear and nonlinear optical wave propagation in one- and two-dimensional waveguide lattices is presented. The ability to completely overcome the effects of discrete diffraction through the mutual trapping of two orthogonally polarized coherent beams interacting in Kerr nonlinear arrays of birefringent …

High Gain / Broadband Oxide Glasses For Next Generation Raman Amplifiers, Clara Rivero

Electronic Theses and Dissertations

Interest in Raman amplification has undergone a revival due to the rapidly increasing bandwidth requirements for communications transmission, both for long haul and local area networks, and recent developments in the telecom fiber industry and diode laser technology. In contrast to rare earth doped fiber amplifiers, for which the range of wavelengths is fixed and limited, Raman gain bandwidths are larger and the operating wavelength is fixed only by the pump wavelength and the bandwidth of the Raman active medium. In this context, glasses are the material of choice for this application due to their relatively broad spectral response, and …

Coherence Properties Of Optical Near-Fields, Adela Apostol

Electronic Theses and Dissertations

Next generation photonics-based technologies will ultimately rely on novel materials and devices. For this purpose, phenomena at subwavelength scales are being studied to advance both fundamental knowledge and experimental capabilities. In this dissertation, concepts specific to near-field optics and experimental capabilities specific to near-field microscopy are used to investigate various aspects of the statistical properties of random electromagnetic fields in the vicinity of optically inhomogeneous media which emit or scatter radiation. The properties of such fields are being characterized within the frame of the coherence theory. While successful in describing the far-field properties of optical fields, the fundamental results of …

Liquid Crystal Materials And Tunable Devices For Optical Communications, Fang Du

Electronic Theses and Dissertations

In this dissertation, liquid crystal materials and devices are investigated in meeting the challenges for photonics and communications applications. The first part deals with polymer-stabilized liquid crystal (PSLC) materials and devices. Three polymer-stabilized liquid crystal systems are developed for optical communications. The second part reports the experimental investigation of a novel liquid-crystal-infiltrated photonic crystal fiber (PCF) and explores its applications in fiber-optic communications. The curing temperature is found to have significant effects on the PSLC performance. The electro-optic properties of nematic polymer network liquid crystal (PNLC) at different curing temperatures are investigated experimentally. At high curing temperature, a high contrast, …

A Realization Of Sc-Cnn-Based Circuit Using Ftfn, Eni̇s Günay, Esma Uzunhi̇sarcikli, Recai̇ Kiliç, Mustafa Alçi

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a realization of the State Controlled Cellular Neural Network (SC-CNN)-based circuit using Four Terminal Floating Nullor (FTFN) as active element is presented. In this realization, a new version of autonomous Chua's circuit has been considered using FTFN realization of SC-CNN-based circuit. The performance of the proposed SC-CNN-based circuit is demonstrated by PSpice simulations.

Prior Knowledge Input Method In Device Modeling, Serdar Heki̇mhan, Serdar Menekay, N. Serap Şengör

Turkish Journal of Electrical Engineering and Computer Sciences

The artificial neural networks are being used in modelling electronic elements and devices especially at microwave frequencies where non-linearity and dependence on frequency cannot be neglected. In this paper, instead of using artificial neural networks as a unique modelling device prior knowledge input method based on feed-forward artificial neural network structures as multi-layer perceptrons and wavelet-based neural networks is investigated. The benefits of prior knowledge input method over plain usage of artificial neural networks in modelling BJT is explored by comparing models obtained with and without prior knowledge input. The novelty of the paper is utilizing wavelet-based neural networks as …

Transformer Protection Using The Wavelet Transform, Okan Özgönenel, Güven Önbi̇lgi̇n, Çağri Kocaman

Turkish Journal of Electrical Engineering and Computer Sciences

This paper introduces a novel approach for power transformer protection algorithm. Power system signals such as current and voltage have traditionally been analysed by the Fast Fourier Transform. This paper aims to prove that the Wavelet Transform is a reliable and computationally efficient tool for distinguishing between the inrush currents and fault currents. The simulated results presented clearly show that the proposed technique for power transformer protection facilitates the accurate discrimination between magnetizing inrush and fault currents in transformer protection.

Multilayer Capacitor Model Of The Earth's Upper Crust, Berk Üstündağ, Özcan Kalenderli̇, Haluk Eyi̇doğan

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, an equivalent electric circuit model of Earth's upper crust is proposed to explain the behavior of measurement patterns acquired from network of the earthquake forecast project. A multi-layer capacitor model having active components that couples with the monopolar probe close to the surface is used to determine earthquake precursory patterns due to structural changes in time. Equivalent circuit model was developed for a) dilatency process that is assumed to be a stress weakening reason and b) external force source that increases shear stress over the fault until sudden decrement before the earthquake. A data acquisition system consisting …

A Robustness Analysis Procedure For Realistic Missiles, Reşat Özgür Doruk, Erol Kocaoğlan

Turkish Journal of Electrical Engineering and Computer Sciences

This paper presents a robustness analysis procedure for short range realistic missile autopilots. The sensitivity of the autopilots to the aerodynamic parameter uncertainties is investigated through the structured singular value theory where the results are verified through nonlinear simulations. Different types of perturbations are implemented in order to measure the complete performance of the missile.

Implementation Of A New Self-Tuning Fuzzy Pid Controller On Plc, Onur Karasakal, Engi̇n Yeşi̇l, Müjde Güzelkaya, İbrahi̇m Eksi̇n

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, the self-tuning method for fuzzy PID controllers that has been developed in a previous study of the authors is implemented on PLC in order to control some standard processes formed on FEEDBACK PCS 327 Process Control Simulator. In this tuning method, the input scaling factor corresponding to the derivative coefficient and the output scaling factor corresponding to the integral coefficient of the fuzzy PID controller are adjusted using a fuzzy inference mechanism with a new input called ``normalized acceleration''. The results of the implementation have been compared with those of the classical fuzzy PID controller without a …

A Survey On The H.264/Avc Standard, Nükhet Özbek, Turhan Tunali

Turkish Journal of Electrical Engineering and Computer Sciences

H.264/AVC is a recently completed video compression standard jointly developed by ITU-T VCEG and ISO/IEC MPEG standards committees. The standard is becoming more popular as it promises much higher compression than that possible with earlier standards. The standard provides flexibilities in coding and organization of data which enable efficient error resilience. The increased coding efficiency offers new application areas and business opportunities. As might be expected, the increases in compression efficiency and flexibility come at the expense of increase in complexity, which is a fact that must be overcome. This paper provides an overview of the technical features of H.264 …

Control Charts Approach For Scenario Recognition In Video Sequences, Ersi̇n Elbaşi, Long Zuo, Kishan Mehrotra, Chilukuri Mohan, Pramod Varshney

Turkish Journal of Electrical Engineering and Computer Sciences

A new approach, based on control charts, is presented for the task of recognition of events and scenarios in video image sequences. For each image in the sequence, low level image processing and feature extraction steps result in feature descriptors for objects of interest detected in the images. Control charts analysis is then explored to classify the nature of the activity depicted by the temporal changes in these features over the image sequence. Scenario recognition with higher accuracy is achieved using this simple approach.

A Model For User Profiling Systems With Interacting Agents, Sanem Sariel, Tevfi̇k Akgün

Turkish Journal of Electrical Engineering and Computer Sciences

Service systems according to users' personal demands and preferences are on their way to provide required services in many application domains. Emulation of interactive model of human societies produces valuable outcomes for such systems. In this work, a system model with interactive agents for multi user service systems is proposed. A novel social interactive agent model using different interaction forms is also included in this proposal. In this model, agents decide how to serve to their users by considering their users' profiles and information from other agents. User clusters are formed by clustering techniques. The Q-learning algorithm is used for …

Weak Factorizations, Fractions And Homotopies, Alexander Kurz, Jiří Rosický

Engineering Faculty Articles and Research

We show that the homotopy category can be assigned to any category equipped with a weak factorization system. A classical example of this construction is the stable category of modules. We discuss a connection with the open map approach to bisimulations proposed by Joyal, Nielsen and Winskel.

Self-Assembly Of Ge Quantum Dots On Si(100)- 2×1 By Pulsed Laser Deposition, M. S. Hegazy, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Self-assembled Ge quantum dots are grown on Si(100)- 2×1 by pulsed laser deposition. The growth is studied by in situ reflection high-energy electron diffraction and postdeposition atomic force microscopy. After the completion of the wetting layer, transient hut clusters, faceted by different planes, are observed. When the height of these clusters exceeded a certain value, the facets developed into {305} planes. Some of these huts become {305}-faceted pyramids as the film mean thickness was increased. With further thickness increase, dome clusters developed on the expense of these pyramids. © 2005 American Institute of Physics. [DOI: 10.1063/1.1949285]

Autonomous Vehicle Technologies For Small Fixed-Wing Uavs, Randal Beard, Derek Kingston, Morgan Quigley, Deryl Snyder, Reed Christiansen, Walt Johnson, Timothy Mclain, Michael A. Goodrich

Faculty Publications

The objective of this paper is to describe the design and implementation of a small semi-autonomous fixed-wing unmanned air vehicle. In particular we describe the hardware and software architectures used in the design. We also describe a low weight, low cost autopilot developed at Brigham Young University and the algorithms associated with the autopilot. Novel PDA and voice interfaces to the UAV are described. In addition, we overview our approach to real-time path planning, trajectory generation, and trajectory tracking. The paper is augmented with movie files that demonstrate the functionality of the UAV and its control software.

Ridding Ships' Ballast Water Of Microorganisms, Fred C. Dobbs, Andrew Rogerson

OES Faculty Publications

( First paragraph) A complex assemblage of microorganisms exists in nearly every aquatic system on earth. In lakes and oceans, every milliliter of water contains about 10² protists (single-celled eukaryotes), 10⁶ bacteria, and 10⁷–10⁹ viruses. Therefore, billions of microorganisms inevitably enter ships’ ballast tanks during normal operations. It has been argued that microorganisms must certainly be frequent invaders of coastal ecosystems, given the high densities of bacteria and viruses in ballast water—10⁸ and 10⁹ organisms per liter, respectively (1)—their potentially high reproductive rates, broad tolerances to physical conditions, and ability to form resting …