Engineering Commons^™

Naval Surface Warfare Center Dahlgren Division Engagement Systems (G) Department Development Of A Plan To Maintain, Expand, And Create Corporate Knowledge, Luis J. Rodriguez

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation presents the implementation of an organizational study in a technical organization that provides basic information for proper decision making to establish, continue, nurture, modify, transfer or terminate a Knowledge Management (KM) practice. Different aspects of an organization influence the capability to create and retain knowledge. Understanding the factors and the environment of the KM problem in an organization is essential for a successful plan and execution of knowledge creation, transfer and retention. The study purpose was to describe the contextual situation of the organization in terms of Human, Structural and Relational Capital; identify critical knowledge for the organization …

Effects Of Signal Ambiguity And Signal Location On Target Detection Under Varying Degrees Of Time Constraint, Kimberly E. Culley

Psychology Theses & Dissertations

The purpose of the current study was to investigate the effects of decision-making strategies and tendencies, time constraint, and signal characteristics on decision-making performance utilizing the fuzzy signal detection theory framework. Participants were tasked with deciding whether x-ray images of passenger luggage contained hazardous objects.

The first objective of the study was to develop a methodology for quantifying optimizing versus satisficing tendencies in decision making through direct measurement and observation.

The second objective of the study was to examine how time constraint and specific signal characteristics contribute to decision making. Interestingly, despite having more time available to conduct a comprehensive …

Reference Modelling In Support Of M&S—Foundations And Applications, Andreas Tolk, Saikou Diallo, Jose Padilla, H. Herencia-Zapana

Engineering Management & Systems Engineering Faculty Publications

Whether by design or by practice, systems engineering (SE) processes are used more and more often in Modeling and Simulation (M&S). While the two disciplines are very close, there are some differences that must be taken into account in order to successfully reuse practices from one community to another. In this paper, we introduce the M&S System Development Framework (MS-SDF) that unifies SE and M&S processes. The MS-SDF comprises the SE processes of requirements capture, conceptual modelling, and verification and validation (V&V), and extends them to M&S. We use model theory as a deductive apparatus in order to develop the …

Prediction Of Foreign Object Debris/Damage (Fod) Type For Elimination In The Aeronautics Manufacturing Environment Through Logistic Regression Model, Natalia V. Espino

Open Access Theses & Dissertations

Foreign Object Debris/Damage (FOD) is a costly and high-risk problem that aeronautics industries such as Boeing, Lockheed Martin, among others are facing at their production lines every day. They spend an average of $350 thousand dollars per year fixing FOD problems. FOD can put pilots, passengers and other crews' lives into high-risk. FOD refers to any type of foreign object, particle, debris or agent in the manufacturing environment, which could contaminate/damage the product or otherwise undermine quality control standards. FOD can be in the form of any of the following categories: panstock, manufacturing debris, tools/shop aids, consumables and trash. Although …

Optimization Of Bioprinting Process Using Design Of Experiments (Doe) And Taguchi Method, Maria Veronica Gonzalez

Open Access Theses & Dissertations

At this time there is a need for new fabrication techniques for engineering complex biological structures related to regenerative medicine, in vitro tissue analysis, and pharmaceutical testing with the purpose of placing specific cells in specific target locations. Right now, there is no enough conventional cell seeding methods that can achieve it. In order to achieve it, bio-fabrication, which is a delivery mechanism capable of placing biomaterials, cells, and bioactive macromolecules in specific target locations, comes to play an important role in this area. Among different approaches, bioprinting is one of the most useful processes that use drop-on-demand delivery mechanisms …

Optimization Of Biomass Logistics System Using Genetic Algorithm And Particle Swarm Optimization For Biofuel Production, Ethel Regina Martinez-Schabez

Open Access Theses & Dissertations

As time goes by, Renewable Energy keeps proving to be an important and potential replacement for fossil fuels. All the different types of Renewable Energy offer a relief to the environmental aftermaths of the prolonged reliance on fossil fuel energy. Bioenergy is one of the types of Renewable Energy that can help by minimizing the emissions of fossil fuels. The Energy Independence and Security Act mandates the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. Biomass and Biofuels can clearly become a significant aid to sustainably supply energy in …

A Quantitative Approach Using An Axiomatic Design Framework To A Medication Distribution System, Pepito Raguini

Open Access Theses & Dissertations

As the need to minimize medication errors drives many medical facilities to come up with robust solutions to the most common error that affects patient's safety, these hospitals would be wise to put a concerted effort into finding methodologies that can facilitate an optimized medical distribution system. If the hospitals' upper management is looking for an optimization method that is an ideal fit, it is just as important that the right tool be selected for the application at hand. In the present work, we propose the application of Axiomatic Design (AD), which is a process that focuses on the generation …

Design Of A Biomass-To-Biorefinery Logistics System Through Bio-Inspired Metaheuristic Optimization Considering Multiple Types Of Feedstocks, Isidoro Trueba

Open Access Theses & Dissertations

Bioenergy has become an important alternative source of energy to alleviate the reliance on petroleum energy. Bioenergy offers significant potential to mitigate climate change by reducing life-cycle greenhouse gas emissions relative to fossil fuels. The Energy Independence and Security Act mandate the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. It is clear that Biomass can make a substantial contribution to supplying future energy demand in a sustainable way. However, the supply of sustainable energy is one of the main challenges that mankind will face over the coming decades. …

Regret Based Robust Solutions For Uncertain Markov Decision Processes, Asrar Ahmed, Pradeep Reddy Varakantham, Yossiri Adulyasak, Patrick Jaillet

Research Collection School Of Computing and Information Systems

In this paper, we seek robust policies for uncertain Markov Decision Processes (MDPs). Most robust optimization approaches for these problems have focussed on the computation of maximin policies which maximize the value corresponding to the worst realization of the uncertainty. Recent work has proposed minimax regret as a suitable alternative to the maximin objective for robust optimization. However, existing algorithms for handling minimax regret are restricted to models with uncertainty over rewards only. We provide algorithms that employ sampling to improve across multiple dimensions: (a) Handle uncertainties over both transition and reward models; (b) Dependence of model uncertainties across state, …

Automated Parameter Tuning Framework For Heterogeneous And Large Instances: Case Study In Quadratic Assignment Problem, Linda Lindawati, Zhi Yuan, Hoong Chuin Lau, Feida Zhu

Research Collection School Of Computing and Information Systems

This paper is concerned with automated tuning of parameters of algorithms to handle heterogeneous and large instances. We propose an automated parameter tuning framework with the capability to provide instance-specific parameter configurations. We report preliminary results on the Quadratic Assignment Problem (QAP) and show that our framework provides a significant improvement on solutions qualities with much smaller tuning computational time.

A Building Energy Efficiency Optimization Method By Evaluating The Effective Thermal Zones Occupancy, Anna Laura Pisello, Michael Bobker, Franco Cotana

Publications and Research

Building energy efficiency is strongly linked to the operations and control systems, together with the integrated performance of passive and active systems. In new high quality buildings in particular, where these two latter aspects have been already implemented at the design stage, users’ perspective, obtained through post-occupancy assessment, has to be considered to reduce whole energy requirement during service life. This research presents an innovative and low-cost methodology to reduce buildings’ energy requirements through post-occupancy assessment and optimization of energy operations using effective users’ attitudes and requirements as feedback. As a meaningful example, the proposed method is applied to a …

An Automated Forward Operating Base Electrical Distribution System Simulator, Onur Kahveci, Mariesa L. Crow, Steven Corns

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, an automated forward operating base electrical distribution system simulator (ODCC) is developed. the ODCC has been developed based on the open platform distribution system simulator (DSS) that is able to create variable models of electrical systems and performing many types of analysis. © 2012 IEEE.

College Of Engineering Senior Design Competition Fall 2012, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Senior Design Experience

Part of every UNLV engineering student's academic experience, the Senior Design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. Working in teams, the senior design project encourages students to use everything learned in the engineering and computer design programs to create a practical, real world solution to an engineering challenge.

Beyond the classroom ...

Because of the requirement to work in teams, students also build good communication skills, presentation skills and even business writing skills. They also have to …

Strider: Manufacturing Processes, Michael Warren-Angelucci

Industrial and Manufacturing Engineering

The goal of the Strider Project is to create a mobility device that can support a person with weakened leg strength and enable them to be supported and maintain a standing position. A prototype of the Strider was created by three Mechanical Engineering students as their senior project. The topic of this senior project was to analyze and create a manufacturing process for the manufacture of the Strider that will be ergonomic and cost effective.

There were many things that needed to be accomplished in order to create the manufacturing process. The first step was to verify that the prototype …

Applications Of Cobb-Douglas Production Function In Construction Time-Cost Analysis, Ashkan Hassani

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Cobb-Douglas Production Function was widely used in economics and productivity studies across many sectors. The function’s quantitative modeling of resource inputs and production outputs is appealing to the research domain of construction management. In this thesis we explored this function’s application in construction schedule crashing and project risk analysis related to duration of construction projects. Existing research on construction time-cost tradeoff issues rarely explore the origin of the crashing cost which is defined as the cost needed to shorten the project to the desired duration. In the existing literature crashing cost function was either assumed without much justification, or came …

Three-Dimensional Indoor Rfid Localization System, Jiaqing Wu

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Radio Frequency Identification (RFID) is an information exchange technology based on radio waves communication. It is also a possible solution to indoor localization. Due to multipath propagation and anisotropic interference in the indoor environment, theoretical propagation models are generally not sufficient for RFID-based localization. In fact, the radio frequency (RF) signal distribution may not even be monotonic and this makes range-based localization algorithms less accurate. On the other hand, range free localization algorithms, such as k Nearest-Neighbor (kNN), require reference tags to be spread throughout the whole three-dimensional (3D) space which is simply not practical. In this work, a hybrid …

Fast Variable Selection For Memetracker Phrases Time Series Prediction, Yoan Miche, Tatiana Chistiakova, Anton Akusok, Amaury Lendasse, Rui Nian, Alberto Guilléhn

Engineering Management and Systems Engineering Faculty Research & Creative Works

This Paper Proposes a Methodology using a Fast Variable Selection as a Modified Version of the Forward-Backward Algorithm. This Methodology is Adapted to the Specificities of the Data Used: Very Small Number of Samples and High Number of Variables. Such Data is Generated using Underlying Dependencies and Seasonality Assumptions, from Meme Phrases Volume Data. by the Use of a Resampling Technique Along with the Proposed Variable Selection Scheme, Significant Results Are Obtained, and the Test Normalized Mean Square Error Performances Are Improved. the Results Indicate that with the Assumptions Made on the Data Structure, Variable Selection is Desirable. Also, the …

Acuta Enews December 2012 Vol. 41, No. 12

ACUTA Newsletters

In this issue...

Strategic Planning & Tampa in January

ACUTA Is Looking for a Few Good Coordinators

Wi-Fi Goes Gigabit-802.11 ac

Info Links

Preparing the Workplace for "Deep Diversity"

Get Your Logos Here!

Webinar: Universal Service & Royalty Payments Due

Using Social Media to Connect

Thanks to Our 2012 Exhibitors

Number 10 on a List of 10 Hard Things IT Must Learn to Accepts

Welcome New Members

Check It Out

Machining Stability Of Wire Edm Of Titanium, Farnaz Nourbakhsh

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

This work presents an experimental investigation of wire electro-discharge machining (WEDM) of titanium alloy. The outstanding characteristics of titanium alloys such as their compatibility and noticeable physical, mechanical and biological performances has led to increased application of them in various industries especially in biomedical industries over the last 50 years. However, due to low thermal conductivity of titanium and its alloys and their reactivity with cobalt in most tool materials, there are some difficulties in machining titanium and its alloys by conventional machining. On the other hand, unconventional machining processes especially Wire Electrical Discharge Machining (WEDM) are more appropriate techniques …

A Simulation-Based Decision Support System To Model Complex Demand Driven Heathcare Facilities, Amr Arisha, Michael Thorwarth

Conference papers

Simulating healthcare processes is a sophisticated endeavor. Treatment processes and patient arrival patterns differ significantly in their statistical attributes and implicate a high degree of variability. In addition, there are several types of interconnected processes of medical staff involved that accompany a patient’s journey through the healthcare facility. Replicating this behavior with process flow models in a discrete event simulation model is highly complex and therefore difficult to create while maintaining a high degree of precision. A framework is thus introduced which delivers an algorithm that allows to implement Multiple Participant Pathway Modeling (MPPM) under the consideration of Flexible Resource …

Multi-Citeria Framework For An Emergency Department In An Irish Hospital, Waleed Abo Hamad, Amr Arisha

Conference papers

Health research is one of these priorities in every economy and through this research an emphasis will be put on translational research in the context of more sustainable and efficient healthcare system (translation of operations management practices to clinical applications). Healthcare systems in general and Emergency Departments in particular around the world are facing enormous challenges in meeting the increasingly conflicting objectives of providing wide accessibility and efficiency while delivering high quality and prompt services. The proposed framework integrates simulation modeling, balanced scorecard, and multi-criteria decision analysis aiming to provide a decision support system to emergency department managers. Simulation outputs …

Modeling System Of Systems Acquisition, Nil Kilicay-Ergin, Paulette Acheson, John Colombi, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

System of systems (SoS) acquisition is a dynamic process of integrating independent systems. This paper describes modeling of the SoS acquisition environment based on the Wave Process Model. Agent-Based modeling methodology is utilized to abstract behavioral aspects of the acquisition process. © 2012 IEEE.

Sustainability For Die Manufacturing: Comparative Study Of Wedm And Milling, Matthew S. Kalus

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Sustainability is more important in today's culture due to the increasing demand for a more eco-friendly society. Concentrations in minimizing and reducing environmental impacts, energy and natural resources have been forthcoming in industry. The tool, mold and die industries are the most well known industries that machine harder materials using mills and WEDM. The objective of this thesis was to compare the sustainability differences in both of these machines utilizing the accepted standards for evaluating the manufacturing process performance for sustainability. These standards include the evaluation of the process parameters, raw materials, power, tools and fluids which all contribute to …

An Unabridged Approach To Lean Implementation: Understanding The Impact Systemically And Supporting The Operational Changes, Joseph D. Wolkiewicz

Industrial Technology Theses

Lean Material Strategy (Lean) has become a governing principle for many companies. These strategies help managers identify waste within the process, and once visible, drive it from the system. One of the principal objectives of this approach is to achieve greater manufacturing efficiency. It is current practice, at a publically held automotive corporation (Company X), to employ Lean in new program launches for its manufacturing sites. While Lean served as the theoretical foundation for design of new assembly systems at Company X sites, insufficient consideration was given to developing an integrated “big picture” solution to the implementation of these new …

Cytoskeletal Strains In Modeled Optohydrodynamically Stressed Healthy And Diseased Biological Cells, Sean S. Kohles, Yu Liang, Asit K. Saha

Mechanical and Materials Engineering Faculty Publications and Presentations

Controlled external chemomechanical stimuli have been shown to influence cellular and tissue regeneration/degeneration, especially with regards to distinct disease sequelae or health maintenance. Recently, a unique three-dimensional stress state was mathematically derived to describe the experimental stresses applied to isolated living cells suspended in an optohydrodynamic trap (optical tweezers combined with microfluidics). These formulae were previously developed in two and three dimensions from the fundamental equations describing creeping flows past a suspended sphere. The objective of the current study is to determine the full-field cellular strain response due to the applied three-dimensional stress environment through a multiphysics computational simulation. In …

Knowledge-Driven Autonomous Commodity Trading Advisor, Yee Pin Lim, Shih-Fen Cheng

Research Collection School Of Computing and Information Systems

The myth that financial trading is an art has been mostly destroyed in the recent decade due to the proliferation of algorithmic trading. In equity markets, algorithmic trading has already bypass human traders in terms of traded volume. This trend seems to be irreversible, and other asset classes are also quickly becoming dominated by the machine traders. However, for asset that requires deeper understanding of physicality, like the trading of commodities, human traders still have significant edge over machines. The primary advantage of human traders in such market is the qualitative expert knowledge that requires traders to consider not just …

Lagrangian Relaxation For Large-Scale Multi-Agent Planning, Geoffrey J. Gordon, Pradeep Varakantham, William Yeoh, Hoong Chuin Lau, Ajay S. Aravamudhan, Shih-Fen Cheng

Research Collection School Of Computing and Information Systems

Multi-agent planning is a well-studied problem with various applications including disaster rescue, urban transportation and logistics, both for autonomous agents and for decision support to humans. Due to computational constraints, existing research typically focuses on one of two scenarios: unstructured domains with many agents where we are content with heuristic solutions, or domains with small numbers of agents or special structure where we can provide provably near-optimal solutions. By contrast, in this paper, we focus on providing provably near-optimal solutions for domains with large numbers of agents, by exploiting a common domain-general property: if individual agents each have limited influence …

Updated Force Model For Milling Nickel-Based Superalloys, Andrew Henderson

All Dissertations

Nickel-based superalloys are commonly used in applications which require high strength and resistance to creep and oxidation in extreme conditions. All nickel-based superalloys are considered difficult to machine; however, cast gamma-prime-strengthened nickel-based superalloys are more difficult to machine than common nickel-based superalloys. Machining comprises a significant portion of manufacturing processes and with advancements in technology and material properties, the methods and models used must be adapted in order to keep pace.
In this research, correlations are made, using fundamental principles, between measurements made with on-machine touch probes and the cutting tool's wear state, those correlations are used in an adaptive …

Supply Chain Network Design: Risk-Averse Vs. Risk-Neutral Decision Making, Alireza Madadi

All Dissertations

Recent events, such as the Heparin tragedy, highlight the necessity for designers and planners of supply chain networks to consider the risk of disruptions in spite of their low probability of occurrence. One effective way to hedge against supply chain network disruptions is to have a robustly designed supply chain network. This involves strategic decisions, such as choosing which markets to serve, which suppliers to source from, the location of plants, the types of facilities to use, and tactical decisions, such as production and capacity allocation. In this dissertation, we focus on models for designing supply chain networks that are …

On The Maintenance Modeling And Optimization Of Repairable Systems: Two Different Scenarios, Suzan Alaswad

Graduate Theses and Dissertations

The use of mathematical modeling for the purpose of analyzing and optimizing the performance of repairable systems is widely studied in the literature. In this dissertation, we study two different scenarios on the maintenance modeling and optimization of repairable systems. First, we study the long-run availability of a traditional repairable system that is subjected to imperfect corrective maintenance. We use Kijima's second virtual age model to describe the imperfect repair process. Because of the complexity of the underlying probability models, we use simulation modeling to estimate availability performance and meta-modeling to convert the reliability and maintainability parameters of the repairable …