Engineering Commons^™

Traffic Patterns For Intelligent Vehicles In The Intersection, Wang Jian, Feng Qi, Xiaowei Hu

Journal of System Simulation

Abstract: With the applications of GPS/DR/MM integrated positioning technology and vehicle infrastructure integration technology, three traffic patterns with which intelligent vehicles go through the intersection are put forward. These three traffic patterns include signal lights adaptive traffic pattern, vehicle self-organizing traffic pattern and vehicle infrastructure integration traffic pattern. They can reduce vehicle delay, avoid traffic conflicts, decrease the probability of traffic accidents, improve traffic efficiency and realize the barrier-free accessibility of intelligent vehicles to the intersection. According to the parameters such as vehicles arrival rate, critical velocity and the average vehicle spacing, a clearance movement model and a circular path …

Modeling And Simulation Of Car-Following On Expressway, Yuhan Jia, Jianping Wu, Yiman Du, Mingyu Liu

Journal of System Simulation

Abstract: Aiming at the high-speed following phenomenon on expressways, an improved car-following model is developed in the paper considering variable safety headway distance. The new model is calibrated and validated by the data collected using an instrumented vehicle in Beijing. Stability analysis of the new model is investigated using the control theory method. The numerical simulations are implemented and the result shows good consistency with theoretical study. The new model is integrated into the traffic simulation system of FLOWSIM. Experiment results show that the improved OV model based FLOWSIM can outperform the original system on some specific conditions.

Evaluation Method Of Imminent Battle Situation In Air Combat, Huimin Cao, Anxiang Huang, Lei Xiang

Journal of System Simulation

Abstract: In the state of air combat, the situation change rapidly. Quick and accurate assessment of the current situation and making decisions is the key to the victory of air combat and the preservation of own strength. Based on the specialty of the modern air battle and pelagic operation, this article adds the political factor, the pilot individual actual combat ability, and the formation cooperative tactical task to fight against the single constraint into the evaluation index system. This makes the evaluation more reasonable and comprehensive and closer to the actual combat, so as to provide more accurate basis for …

3d Flight Trajectory Simulation Generator Based On Track Constraints, Shuguang Sun, Cheng Peng

Journal of System Simulation

Abstract: The airborne navigation equipment needs accurate flight trajectory data to test its performance. According to the requirements of the Beidou receivers, considering the constraint of trajectory and flight performance, a flight trajectory generator is designed using iteration like method. The flight trajectory generator can generate the whole trajectory data and the flight parameters of the aircraft based on the actual flight procedures, and display the data and parameters in real time. The whole flight trajectory simulation data from Beijing International Capital Airport to Guangzhou Baiyun International Airport is generated. The result shows that the flight trajectory generator can generate …

Modular Design Method Of Integrated Avionics Simulation System, Mingbo Zhao, Pan Long, Longwei Jiang, Wang Gang, Guangxing Zhao

Journal of System Simulation

Abstract: In the past, there were some problems in the software design for the flight simulation avionics system such as the decentralized structure and the low degree of modularization. Aiming at these problems, a hierarchical, modular integrated avionics system is constructed. The logic part dispersed in each function module is independent to form the integrated logic module. Each task function module and its sub module are responsible for the calculation of the relevant task function algorithm. Modular design is carried out in a deeper level. By dataflow analysis, each module in this design has strong cohesion and weak coupling and …

Rehabilitation Training System Based On Brain Computer Interface, Banghua Yang, Li Bo

Journal of System Simulation

Abstract: Brain-computer interface (BCI) is a new communication and control method. The BCI rehabilitation training system was developed for rehabilitation training of post-stroke patients by using MATLAB and VC++ hybrid programming method. By decoding the EEG signal, the patient's movement intention can be recognized accurately in real time, then the work of the rehabilitation peripheral is triggered to give feedback from the visual, auditory, and tactile. The patient's active rehabilitation is achieved through the system. The system has the characteristics of user-friendly interface, modular algorithm, high online recognition rate; and it can be used as a reference for BCI-based …

Modeling And Simulation Of Inter-City Passenger Travel Service Flow Based On Petri Net, Qipeng Sun, Guo Xin, Ma Fei

Journal of System Simulation

Abstract: On the basis of inter-city passenger travel chain, the inter-city passenger transport service process is studied; the Petri net language is used for establishing and simulating the model of inter-city passenger transport service process based on the Visual Object Net++; and the simulation results are used for verifying the reliability of the established model with the theory of petri net, while the model is transformed into a homogeneous Markov chain with the process. The detailed analysis on the city subway of the inter-city passenger transport service process was carried out. By modeling and simulating, the derived value of …

High-Pass Difference Features Based Image Quality Assessment, Wang Rui, Li Ping, Bin Sheng, Congbin Qiao, Lizhuang Ma, Enhua Wu

Journal of System Simulation

Abstract: Current methods of image quality assessment only can assess the quality of images under the same type of image distortion. In order to fix such weaknesses, this paper is designed based on the image features of natural scene statistics and proposes a new metric method using high-pass filter for detecting features. The approach computes locally the normalized luminance; selects features such as the difference of RGB channels via high-pass filter, image gradient, sharpness, contrast, etc.; and analyzes and gathers features in the metric method trained by logistic regression. Experimental results show that the proposed method can work efficiently under …

Design And Research On Simulation Model Of Limestone-Wet Flue Gas Desulfurization Absorption Tower, Zhang Yue, Han Pu, Zhang Xiang

Journal of System Simulation

Abstract: The mass transfer and chemical reaction processes of wet flue gas desulfurization (FGD) are very complex. It is helpful to improve the operation level of desulfurization site by studying the internal mechanism and establishing a high precision mechanism model. The absorption tower is divided into some regions, and the modeling targets in different regions are determined. The sulfur dioxide absorption region is divided into different heights of the "cell" by the slurry droplet falling distance and exposure time. According to the motion characteristics and mass transfer process, the desulfurization efficiency and pressure drop are calculated, and the absorption efficiency …

Indoor Scene Generation Based On Case-Based Reasoning And Collaborative Filtering, Peihua Song, Jinyuan Jia

Journal of System Simulation

Abstract: To solve the problem of time-consuming and single scene generation in indoor scene generation, we propose an indoor scene generation algorithm based on case-based reasoning and collaborative filtering techniques. The algorithm of functional area division is performed on the two-dimensional room floor plan. Thecase-based reasoning is used to generate 3D scenes; and the collaborative filtering is used to generate diverse indoor scenes. A scene evaluation method based on user feedback information is proposed. Experiments were carried out on the living room and bedroom to generate scenes. The experimental results show that the proposed algorithm is effective. The running time …

Simulation Algorithm Of Streak Tube Multi-Spectral Laser 3d Imaging System, Jingya Cao, Shaokun Han, Wenze Xia, Wang Liang

Journal of System Simulation

Abstract: The streak tube laser three-dimensional imaging system is one of the most promising practical laser imaging systems, because of its high precision, large field of view and high frame frequency. A multispectral imaging simulation algorithm for multi-slit streak tube is proposed based on the research of the multi-spectral imaging. The derivation of the main structural parameters is given. The influence of the number of different detectors on the time resolution and spatial resolution of the system is analyzed. In the model of the simulation system, the laser echo signals of multiple wavelength bands are fed into the photocathode of …

Visualization Platform Of Lightweight Toxic Gases Dispersion, Jinyuan Jia, Xinzhi Zhao, Panjing Li

Journal of System Simulation

Abstract: The sudden accidents usually emit large quantities of toxic gases and harmful pollutants in a short time. It is very necessary and meaningful to predict and visualize the dispersing trend of those toxic gases over Internet as accurate and fast as possible for people to evacuate safely and immediately. We propose a lightweight simulation for air pollution dispersion based on the Gaussian puff model. With this method, we can visualize the procedure of toxic gas dispersing on a webpage in real-time. we can also estimate the pollution of toxic gas dispersion trend and analyze their further pollution effects on …

Hardware-In-The-Loop Simulation Method For Laser Active Imaging Guidance, Zhang Qing, Yijie Li

Journal of System Simulation

Abstract: The system of laser active imaging guidance hardware-in-the-loop simulation is a significant system for testing and validating the capability of laser active imaging guidance and control, it also means a lot in practical applications. The composition of guidance and control system for the laser active imaging aerocraft is analyzed, and the purpose and test flow for the hardware-in-the-loop simulation system are introduced. The integrated project for laser active imaging guidance hardware-in-the-loop simulation system is designed. The functions and elements for the crucial simulation equipment of laser active imaging echo simulator are analyzed; the elements of model composition and …

Improved Dv-Hop Localization Scheme Based On The Best Path Matching Strategy, Qinqin Shi, Xu Qiang, Jianping Zhang

Journal of System Simulation

Abstract: Improvement strategies are provided in view of the fact that the original DV-Hop (Distance, Vector-Hop) method has great error in distance estimation due to the network anisotropy in practical applications and the sensitivity of its location derivation algorithm to the range error. In the distance estimation step, a strategy of computing path similarity parameter is proposed to find out the most similar beacon-beacon path to beacon-node path; in the position calculation step, a modified PSO (Particle Swarm Optimization) algorithm is added after the initial position of an unknown node being derived using Lateration algorithm. Simulation shows that compared with …

Traffic Dynamic Regulation And Control Technology In The Central Area Of Nanning City, Yiman Du, Hongfan Su, Jianping Wu, Chen Yu, Huang Lin, Longfei Liu

Journal of System Simulation

Abstract: As the transportation develops rapidly, the traffic burden increases in downtown areas, especially in the areas of convention center, government building, and business & financial center, which exacerbates traffic congestion nearby. Conventional traffic control measures taken include stagger shifts, congestion charging, and tail number limit. Interests of multi aspects are involved in these measures, which has broad effect. The traffic managers now begin to ameliorate traffic burden by technical methods. A feedback-gate control based regional traffic volume control method was proposed and a microscopic simulation was adopted. This reasearch aims to ameliorate traffic pressure and balance traffic flow through …

Gesture Recognition Method Based On Multi-Feature Fusion, Yuanming Wang, Zhang Jun, Yuanhui Qin, Xiujuan Chai

Journal of System Simulation

Abstract: Aiming at the specific application requirements of command gesture for flight deck, a gesture recognition method based on multi-feature fusion is proposed. The 3D trajectory feature vector and hand sparse representation are established from two aspects of the trajectory and posture based on the visual information collected by depth camera. On the one hand, the gesture is recognized through normalization resampling and alignment based on the trajectory feature. On the other hand, the gesture is recognized through sparse representation alignment based on the HOG feature. The recognition results are fused effectively. The experimental results indicate that our …

On Accounting For Equipment-Control Interactions In Economic Model Predictive Control Via Process State Constraints, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Traditionally, chemical processes have been operated at steady-state; however, recent work on economic model predictive control (EMPC) has indicated that some processes may be operated in a more economically-optimal fashion under a time-varying operating policy. It is unclear how time-varying operating policies may impact process equipment, which must be investigated for safety and profit reasons. It has traditionally been considered that constraints on process states can be added to EMPC design to prevent the controller from computing control actions which create problematic operating conditions for process equipment. However, no rigorous investigation has yet been performed to analyze whether, when a …

Multiagent Decision Making For Maritime Traffic Management, Arambam James Singh, Duc Thien Nguyen, Akshat Kumar, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

We address the problem of maritime traffic management in busy waterways to increase the safety of navigation by reducing congestion. We model maritime traffic as a large multiagent systems with individual vessels as agents, and VTS authority as the regulatory agent. We develop a maritime traffic simulator based on historical traffic data that incorporates realistic domain constraints such as uncertain and asynchronous movement of vessels. We also develop a traffic coordination approach that provides speed recommendation to vessels in different zones. We exploit the nature of collective interactions among agents to develop a scalable policy gradient approach that can scale …

Multiagent Decision Making For Maritime Traffic Management, Arambam James Singh, Duc Thien Nguyen, Akshat Kumar, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

We address the problem of maritime traffic management in busy waterways to increase the safety of navigation by reducing congestion. We model maritime traffic as a large multiagent systems with individual vessels as agents, and VTS authority as the regulatory agent. We develop a maritime traffic simulator based on historical traffic data that incorporates realistic domain constraints such as uncertain and asynchronous movement of vessels. We also develop a traffic coordination approach that provides speed recommendation to vessels in different zones. We exploit the nature of collective interactions among agents to develop a scalable policy gradient approach that can scale …

The Role Of Artificial Intelligence In Business Decision Making, Chase Rainwater

Operations Management Presentations

When we think of artificial intelligence, we often are drawn to the self-driving cars, voice-based home technologies and automated online interactions that fill the news and drive our daily activities. However, the root of these advancements, machine learning, is a predictive analytics technique that has much broader applicability. With the age of “big data” and the buzz around “data science” continuing to grow, decision-makers are asking themselves if emerging technologies, such as machine learning, can help improve business processes.

In this seminar we will demystify the fundamental concepts that comprise machine learning. The differences between supervised and unsupervised learning, as …

Application Of Artificial Neural Networks To Assess Student Happiness, Gokhan Egilmez, Nadiye O. Erdil, Omid Mohammadi Arani, Mana Vahid

Mechanical and Industrial Engineering Faculty Publications

The purpose of this study is to develop an analytical assessment approach to identify the main factors that affect graduate students' happiness level. The two methods, multiple linear regression (MLR) and artificial neural networks (ANN), were employed for analytical modelling. A sample of 118 students at a small non-profit private university constituted the survey pool. Various factors including education, school facilities, health, social activities, and family were taken into consideration as a result of literature review in happiness assessment. A total of 32 inputs and one output variables were identified during survey design phase. The following survey conduction, data collection, …

A Design For Affordances Framework For Product Packaging: Food Packaging Case Study, Ahmad Abdelhafiz Mumani, Richard T. Stone, Esraa Abdelall

Journal of Applied Packaging Research

Since affordances provided by packaging features play a major role in facilitating user packaging interaction, it is important to integrate the concept of affordances into the packaging design process and to understand the interrelationships between packaging features and affordances. A framework is proposed for linking user requirements to packaging design features utilizing the concept of affordances. The framework is accomplished in two main steps; first, determine the affordances required to facilitate performing packaging-related tasks, and second, link these affordances to packaging features. Previous packaging usability studies were reviewed to elicit requirements in terms of affordance properties such as intuitiveness, responsiveness, …

Application Of Virtual Reality In Rehabilitation Of Special Populations, Tingting Liu, Liu Zhen, Ping'an Qian, Rongrong Xuan, Wang Jin, Yanjie Chai

Journal of System Simulation

Abstract: With the continuous development of urbanization and the trend of population aging, the number of people who need physical and mental rehabilitation continues to increase. Using information technology to assist the rehabilitation process has the important practical significance. The existing studies about the application of virtual reality (VR) technology in the rehabilitation, psychological problems and children with autism for stroke are reviewed. A framework for the intelligent rehabilitation system is proposed. Virtual agent, the technology of somatosensory and voice recognition are advised to be used. Based on the proposed framework, a prototype rehabilitation game for autism and an upper …

A Review Of Rare Event Simulation, Liping Wang, Wenhui Fan

Journal of System Simulation

Abstract: Rare-event has a great significance for its lower probability of occurrence and greater harmfulness, the traditional Monte Carlo method is difficult to analyze it effectively. Rare-event simulation technique which is developed quickly and applied in many areas can sample the rare-event effectively with variance reduction methods and can estimate the occurrence probability of rare-event. The research status of rare-event simulation technique is summarized firstly; the principles, problems and progress of the main methods are analyzed and concluded secondly; after that the application fields of the technique are elaborated and summarized; the future development tendency of rare event simulation technique …

Integrated Modeling For Time Delay Stability Analysis In Gcps, Jianbo Jiang, Li Peng, Aimin Miao, Cao Min, Songhai Zhang, Tan Lei, Kerun Li

Journal of System Simulation

Abstract: According to the separation problems of physical and cyber modeling in time delay stability analysis for grid cyber-physical system (GCPS), an integrated modeling method is presented and proved by single machine infinite bus system (SMIBS). The time delay and stability of GCPS are analyzed and discussed, and the physical and cyber models of SMIBS are established respectively. The dynamic linking library by EA and VS based on information model (CIM) are generated, and the united simulation platform is achieved by MATLAB. The results of the simulation show that the unified structure of information flow …

Parameter Estimation Of Lfmcw Signals Based On Improved Sm Method, Jiang Li, Junni Zhou, Runling Yang, Liu Li

Journal of System Simulation

Abstract: The parameter estimation of linear frequency modulation continuous wave (LFMCW) signal is a research hotspot in electronic reconnaissance systems. In this paper, the time frequency distribution feature of LFMCW signals is studied first. Based on the improved S-method (SM), an algorithm for parameter estimation of LFMCW signals is proposed. It uses short-time Fourier transform (STFT) to calculate the SM with adaptive window width, which can suppress the crossterm interferences and improve the time-frequency resolution. Theoretical analysis and simulation experiment results demonstrate the validity of the proposed algorithm under low SNR.

Research On Method Of Battlefield Situation Representation Based On Multiplex Information Cell, Xiying Huang, Dinghai Zhao, Shao Wei

Journal of System Simulation

Abstract: We adopt the grid-space method to represent the battlefield as discrete cell model. And we construct the multiplex information cell (MIC) using the situation-meta’s information such as position, states collection, indexed by position. The positions of MICs correspond to the battlefield’s positions. Both of them can be represented as stack or data array. This method gives a way to build the whole mapping relationship between data structure which the computer can understand and the battle factors such as position and state of situation-meta. When the position or state of the situation-meta changes, the computer can redraw the view according …

Towards The Automatic Evolution Of Workload Models In Large-Scale Astronomical Data Management, Huajin Wang, Wan Meng, Han Rui, Ren Wei, Haiming Zhang, Jianhui Li

Journal of System Simulation

Abstract: The benchmark's guiding role in system selection/optimization requires its workload model has the ability to: Run on various systems of the target application scenario (be portable); Reflect the typical tasks' characteristics and data access patterns (be representative). The emerging systems and tasks in large-scale astronomical data management field have led workload models constructed by existing methods to be prone to lose portability and representativeness. An automatic evolutionary workload modeling method has been proposed: Abstract operations are used to keep the workload model’s portability; Automatic workload log analytics are used to keep the workload model’s representativeness. The feasibility of this …

Analysis Of Lane Changing Conflict Based On Tta In Expressway Weaving Area, Wang Bao, Linjie Gao, Zhicai Juan

Journal of System Simulation

Abstract: The study of lane changing behavior in expressway weaving area is of great significance to the analysis of the traffic flow conflict and driving behavior characteristics. In this paper, a lane changing conflict model was established and trajectory extraction software was used to extract and calculate TTA (time to avoidance) and TTC (time to collision). We got 336 TTAs and 233 TTCs and 4 grades of the lane changing conflict level were built by using statistical method. We came up with the proposed lane changing speed and some traffic management strategies. The study will help to …

Direct Parameter Identification Method For Steam Turbine And Its Governing System, Jingliang Zhong, Xiaolong Gou, Tongtian Deng

Journal of System Simulation

Abstract: Since most of the traditional parameter identification methods used in the steam turbine and its governing system have the shortages of poor fitness, complicated identification process and long period, a novel identification method based on least square theory, called direct identification method, is proposed in this paper. Parameter to be identified can be obtained quickly and accurately through direct identification method if the identification process is transferred to solve nonlinear equation which represents the minimal error between simulated data and measured data. The identification results show that during identification process the proposed method has high identification efficiency, accurate identification …