Engineering Commons^™

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Securing The Energy Transition: Cyber-Physical Security And Resilience In Next-Generation Power Systems, Airin Rahman

Graduate Studies Theses and Dissertations 2026

Modern power systems are rapidly evolving into renewable-dominated and digitally interconnected cyber-physical infrastructures due to the increasing deployment of distributed energy resources (DERs), inverter-based technologies, and advanced control platforms. Maintaining reliability under high renewable penetration requires flexible resources capable of shifting energy across extended time horizons. Long-duration energy storage (LDES), particularly hydrogen-based energy systems, has therefore emerged as an important enabler of renewable integration, grid flexibility, and resilience. However, the growing dependence on communication, sensing, and distributed control also expands the cyber-physical attack surface of modern power systems, creating security and resilience challenges that conventional operational paradigms were not designed …

Design Of Team Performance Evaluation Scenario Under Stress And Failures, Sam Tola

Open Access Master's Theses

THE CONTENT OF THIS DOCUMENT HAS BEEN REMOVED BECAUSE IT CONTAINS CONTROLLED UNCLASSIFIED INFORMATION.

Evaluating The Use Of Machine Learning For Road Maintenance Cost Estimation, Shahla Shirinzad, David Enke

Engineering Management and Systems Engineering Faculty Research & Creative Works

Accurate estimation of highway maintenance costs is essential for efficient resource allocation and long-term infrastructure sustainability. This study evaluates the effectiveness of advanced machine learning models, including ResNet, Transformer, and other neural network architectures, for forecasting maintenance costs using historical data from the Highway Maintenance Improvement Program (HMIP) provided by the North Carolina Department of Transportation (NC DOT). A comprehensive comparative analysis is conducted across multiple models using standard performance metrics, including R², MAE, RMSE, and MSE. The results demonstrate that advanced architectures, particularly ResNet and Transformer, consistently outperform traditional statistical approaches and baseline machine learning models, achieving …

Sustmine: A Framework For Integrating Sustainable Development Dimensions Into Strategic Mine Planning, Hussam Altalhi, Kwame Awuah-Offei, Gabriel Nicolosi, Abdullah Al Moinee, Nasib Al Habib

Mining Engineering Faculty Research & Creative Works

Strategic mine planning involves optimizing resource extraction to achieve economic, environmental, and social objectives. However, only a few frameworks offer a unified approach that simultaneously employs systematic indicator selection and weightless trade-off evaluation. This study addresses these issues by proposing a comprehensive framework for integrating sustainability into strategic mine planning, named SustMine. SustMine introduces two key advancements: (1) a rigorous, systematic, criteria-based process for selecting site-specific sustainable development indicators (SDIs), and (2) a weightless evaluation strategy that utilizes Pareto front analysis to construct composite indices. This allows decision-makers to identify non-dominated (optimally balanced) alternatives without relying on arbitrary or subjective …

Simulation Optimization Of Intermodal Freight Transportation Under Disruptions, Israt Humayra

Graduate Theses, Dissertations, and Problem Reports (ETD)

Rapid growth in freight transportation in modern supply chains has led to increased operational costs, congestion, and severe environmental impacts, especially greenhouse gas emissions. Combining different modes, such as highway, railway, and waterway, intermodal transportation could thus offer considerable benefit to improve efficiency, sustainability, and resilience. However, most existing planning approaches rely on simplified assumptions, fixed schedules, and average cost estimates, making them less relevant to dealing with real-world uncertainties and disruptions. This study develops a simulation-optimization framework for intermodal freight transportation under disruption. We develop a mixed-integer programming model to represent an intermodal logistics planning framework on a multi-layered …

A Study Of Perceptions, Readiness, Benefits, And Barriers Related To Exoskeleton Adoption In New Jersey’S Warehousing Sector, Terry Asante

Theses

The warehousing industry in New Jersey remains a vital component of the region's logistics network, employing more than 200,000 workers who routinely engage in lifting, bending, overhead reaching, and other physically demanding activities. These exposures contribute to musculoskeletal disorder (MSD) rates that exceed national averages, particularly affecting the low back and shoulders. Nationally, MSDs account for an estimated $420 billion in combined direct and indirect costs each year, underscoring the need for interventions that can effectively reduce biomechanical strain. Industrial exoskeletons have emerged as a potential solution, with prior research demonstrating reductions in muscle activation, perceived exertion, and fatigue during …

Optimization Of Welding Parameters For Carbon Steel Fabrication: A Trade-Off Between Tensile Strength And Heat-Affected Zone, Melkiory B. Njawala, Simon I. Marandu, Enock W. Nshama

Tanzania Journal of Engineering and Technology (TJET)

This study focused on optimizing gas metal arc welding (GMAW) parameters for AISI 1045 carbon steel to balance the ultimate tensile strength (UTS) and heat affected zone (HAZ) size of the weldment. Using a full factorial design of experiments (27 trials), the influence of welding current, arc voltage, and travel speed on UTS and HAZ size of AISI 1045 carbon steel weldments were investigated. From the analysis of results, using Analysis of variance (ANOVA) technique, the results revealed that current, travel speed and arc voltage contributed 74.41%, 19.05% and 0.04%, respectively, to the total percentage of variations on UTS data. …

Combined Optimisation Of Machining Parameters, Tool Wear, Dimensional Errors And Quality Deviations In Multi-Pass Turning Operations, Mussa I. Mgwatu

Tanzania Journal of Engineering and Technology (TJET)

Measurements of on-line tool wear and part dimensional accuracy in machining operations are not readily available in machining shop floor because they involve higher investment such that the decisions of tool wear and part quality for intermediate cutting passes cannot be justified. This paper demonstrates how the optimisation of machining parameters can be made together with tool wear and part quality for turning operations. Two optimisation models were developed for maximum material removal rate and minimum production cost. A theoretical framework was initially presented before the two models were formulated. Input data for the models were adopted from previous studies …

Design Of A Sequential Logic Control System For Water Recycling In Car Wash Operations For Minimising Utility Costs, Enock W. Nshama, Mussa Iddi Mgwatu

Tanzania Journal of Engineering and Technology (TJET)

The car wash sector in Tanzania is expected to expand in the next few years, since the trend of imported cars is increasing. However, the traditional method of washing cars is subjected to water overuse and environmental pollution. This study presents a design of water recycling sequential logic control system to come up with a cost-effective car wash operation aimed at effectively utilising water and electricity resources. Data were collected at 78 car wash stations in Dar es Salaam region to determine water and electricity costs. Data were analysed using MS Excel and Minitab to establish the trend of utility …

Techno-Economic Analysis Of Captive Solar Power Systems For Tanzania’S Manufacturing Sector: Barriers, Opportunities, And Feasibility, Edson Uhale, Sarah P. Ayeng'o

Tanzania Journal of Engineering and Technology (TJET)

This study provides a comprehensive techno-economic analysis of the barriers, opportunities, and feasibility of adopting captive solar photovoltaic (PV) systems in Tanzania’s industrial manufacturing sector. Despite Tanzania’s high solar irradiation potential, averaging 4.5 to 7.0 kWh/m²/day, the uptake of captive solar systems remains minimal, with only 2.3 percent of surveyed firms currently using solar energy, primarily for non-productive uses such as security lighting. Using a mixed-methods approach, data were collected from 43 manufacturing firms in the Dar es Salaam and Pwani regions through structured questionnaires, supported by PVSyst simulations and financial modelling to assess two system configurations: grid-connected PV systems …

Improvement Of Technology And Control And Management Systems Of The Plant Oil Refination Process, Elyor Samadov

Chemical Technology, Control and Management

The article examines modern approaches to modernizing vegetable oil refining processes from the perspective of increasing energy efficiency, environmental friendliness, and final product quality. Traditional and innovative technologies are analyzed, with a focus on the implementation of membrane filtration, automated control systems, heat exchange complexes, and renewable energy sources. It has been shown that the use of intelligent control systems, high-precision membrane filters, and heat regeneration allows for a 25% reduction in energy consumption, a 20% reduction in greenhouse gas emissions, and a significant improvement in acidity, color, and impurity content in the product. The obtained results show the effectiveness …

Analog Systems Of Physical Quantities And Their Graph Models In Determining The Parameters Of Mechatronic Modules, Temurbek Omonboevich Rakhimov, Elmira Eshmurod Qizi Raxmanova, Guzal Khujaniyazova

Chemical Technology, Control and Management

This article is dedicated to the analogy systems of physical quantities and their graph models in determining the parameters of mechatronic modules. It presents the general sets and fundamental laws of analogy systems of physical quantities and their elements for determining the parameters of mechatronic modules. Based on the general sets and fundamental laws of analogy systems of physical quantities and their elements, principles have been developed for mechatronic modules with a heterogeneous structure consisting of electrical, magnetic, and mechanical parts. In these modules, the field as a form of matter exists, forming the basis for developing mathematical models to …

Improving Self-Diagnostic Methods Of Flow Measurement Systems Based On Artificial Intelligence, Elbek Ortikov

Chemical Technology, Control and Management

The article examines methods for improving self-diagnostics of consumption measurement systems based on artificial intelligence in the context of industry digitalization and the development of cyber-physical systems. It has been shown that traditional flow meters used to measure the flow rate of liquids and gases are subject to mechanical, hydraulic, electronic, and hidden failures, which reduce the accuracy and reliability of measurements. A justification for the need to transition from classical maintenance methods to intelligent self-control methods that ensure the detection of anomalies and hidden malfunctions in real time is presented. A multi-level architecture of intelligent self-diagnosis is proposed, including …

Performance Assessment Of Operators Under Digital Simulator-Based Training In Automated Industrial Systems, Kamola Abdullaeva

Chemical Technology, Control and Management

This article proposes a comprehensive approach to training process operators, based on computer simulators integrated with digital twins, SCADA/DCS systems, real production data, and artificial intelligence algorithms. This approach is particularly relevant given the increased requirements for safety, productivity, and reliability of industrial facilities, as human factors are often the main cause of accidents (up to 60-80% of cases). The architecture of the simulator complex is designed to accurately emulate steady-state, transient, and pre-emergency operating modes of equipment, which are not achievable under actual production conditions. The experiment compared the training effectiveness of two groups of operators: one that used …

Expansion Of The Functionality Of Discrete Fiber-Optic Liquid Level Sensors, Azimjon Mamadaliyevich Khusanov, Yuriy Gennadyevich Shipulin

Chemical Technology, Control and Management

The article examines the problems and prospects of creating discrete fiber-optic liquid level gauges. Functional diagrams of single-channel and multi-channel discrete fiber-optic liquid level meters are presented. Examining the challenges of keeping this system running continuously reveals that sustaining its required reliability necessitates replacing malfunctioning measurement systems with operational ones. Investigations into differential equation models demonstrate that system recovery and failure events occur independently and follow a Poisson distribution pattern.

Investigation Of Nonlinear Magnetic Circuits Of Measuring Transducers With A Special Parameter Distribution Structure, Javhar Sulton O'G'Li Fayzullayev

Chemical Technology, Control and Management

The article proposes a new analytical method for investigating nonlinear magnetic circuits with a special structure of parameter distribution. The method is based on introducing into the system of nonlinear differential equations of such circuits the condition that the second derivative of the magnetic flux along the length of the circuit is equal to zero, as well as on the assumption that one of the geometric parameters of the studied magnetic circuit – the size of the air gap between the ferromagnetic rods, their thickness, width, or the linear value of the number of turns of the distributed excitation winding …

Design Of A Fuzzy Set-Point Tracking Controller Based On The State-Dependent Control Characteristics Of Fuzzy Logic And Pid For Temperature Control Systems In Electrical Equipment, Rahim Mammadzada

Chemical Technology, Control and Management

This paper presents a Fuzzy-SPT (Fuzzy Set-Point Tracking) controller designed to combine the strengths of FLC (Fuzzy Logic Control) and PID (Proportional-Integral-Derivative) control while mitigating their limitations across varying operating conditions. Inspired by state-dependent reasoning but implemented within a single controller, the method uses internal logic to adapt the control effort across different operating regions. FLC handles rapid changes and nonlinear transients, enabling fast system response without overshoot, while PID-like integral action is activated when the FLC reaches steady state or enters a threshold region near the set point, eliminating residual errors and maintaining stable performance. By applying each behavior …

Empirical Analysis Of Machine Learning Models For Predicting Equipment Failures Using Iot Sensor Data, Yusuf Shodiyevich Avazov

Chemical Technology, Control and Management

This article examines the problem of detecting and predicting industrial equipment faults using IoT sensor data through machine learning techniques. Sensor readings such as temperature, vibration, pressure, voltage, and current, as well as FFT-based features, were statistically analyzed. Class imbalance and low signal informativeness were identified as key factors limiting model accuracy. Results obtained from Logistic Regression, Random Forest, and XGBoost models were comparatively evaluated, showing that when ROC-AUC values remain around 0.5, distinguishing fault and non-fault states becomes challenging. Correlation and feature-importance analyses confirmed the absence of strong dominant indicators. The findings highlight the need to improve sensor architecture …

Current Trends In Industrial Gas Furnace Control And Monitoring Systems, Utkir Uktam O'Gli Kholmanov

Chemical Technology, Control and Management

This paper presents a critical review of modern control methods applied to industrial gas-fired furnaces. Conventional PID controllers and their advanced modifications, including Advanced Process Control (APC) and cascade control schemes, are analyzed alongside Model Predictive Control (MPC) approaches. In addition, intelligent control algorithms—such as fuzzy logic and neuro-fuzzy systems (Fuzzy, ANFIS)—are examined. The study also considers advanced sensing technologies, including Tunable Diode Laser Absorption Spectroscopy (TDLAS), acoustic pyrometry, and infrared pyrometers, as well as digital twins and CFD-based modeling techniques. Particular attention is given to a comparative evaluation of control strategies based on key performance criteria, including energy efficiency, …

Skeleton-Based Human Action Recognition Using Spatio-Temporal Latent Features With A Gcn Model, Avazjon Marakhimov, Kabul Khudaybergenov, Mominov Zakhriddin

Chemical Technology, Control and Management

Owing to its resilience to visual noise and viewpoint variations, skeleton-based analysis has become a cornerstone of human action recognition research. Despite its practical significance, existing methodologies often suffer from a reliance on single-stream skeletal representations, which fail to encompass the full complexity of action features. This study introduces Latent Features for Human Action Recognition (LFHAR), a novel architecture designed to overcome these limitations by utilizing diverse spatio-temporal latent representations for improved feature extraction. The approach applies graph-based transformations to individual skeletal frames in temporal sequences, then arranges the derived graph features into spatio-temporal matrices. Evaluation of standard datasets demonstrates …

(R2141) Analysis Of Map^I_1 , Ph^(Oa)_2 / Ph^I_1 , Ph^O_2 / 1 Retrial Inventory Queue With Two Way Communication, (S, S) Replenishment Policy, Feedback, Bernoulli Vacation And Impatient Customers, G. Ayyappan, V. Ganesan

Applications and Applied Mathematics: An International Journal (AAM)

This work discusses about the topic as the two-way communication retrial inventory queue model, the (s, S) replenishment policy, immediate feedback, Bernoulli vacations, and impatient customers. The assumption we make is that arrivals follow a Markovian arrival process, and the server provides phase type services. When the server is idle and there is a positive inventory, an arriving customer immediately receives service. If not, arriving customers goes to orbit with infinite capacity. Only in the account of positive inventory the server renders rapid feedback for incoming call arrivals, otherwise customer departs. Outgoing calls will only be made by the server …

Improved Pid Search Algorithm For Uav Path Planning In Mountainous Environments, Yi Peng, Yunkui Lei, Qingqing Yang, Hui Li, Jianming Wang

Journal of System Simulation

Abstract: To address the challenges of UAV path planning in mountainous environments, including high computational complexity and suboptimal optimization performance, and the disadvantages of the PIDbased search algorithm, such as low optimization accuracy and slow convergence rate, this paper proposed an improved PID search algorithm (IPSA). The method introduced a good point set to ensure a more uniform population distribution, thereby enhancing population diversity and global search capability. The Q-learning algorithm was employed to adapt PID parameter adjustments, incorporating an exploration rate factor to further improve the algorithm's exploration and computational capabilities. A lens imaging opposition-based learning mechanism was also …

Dynamic Characteristic Simulation And Optimization Of Ground Test System For Airborne Launch Rack, Yuguang Bai, Sheng Zhang, Yushun Cao, Xiaoshi Zhang, Hu Huang

Journal of System Simulation

Abstract: To solve the ground equivalent test problem of the airborne launch system, an optimization method for the dynamic characteristics of the ground launch rack test system based on a multi-variable optimization approach was proposed. Through the discussion on the boundary conditions of the foundation, an effective dynamic simulation model of the ground launch test system was established. By comparing the dynamic characteristics of the launch rack structure in the airborne state and the ground test state, the objectives and constraints of the optimization design were determined. The dynamic characteristics of the ground test system were optimized and designed. …

Optimization Of Dynamic Weapon Target Assignment Considering Random Disturbances, Zhenzu Bai, Yizhi Hou, Zhangming He, Juhui Wei, Haiyin Zhou, Jiongqi Wang

Journal of System Simulation

Abstract: The impact of various random disturbances in the actual command and control environment of unmanned systems on problem modeling and solving of weapon target assignment was considered, and three types of uncertainty disturbance constraints were investigated. A multi-objective dynamic sensor weapon target assignment model was established. By considering the issues of model property changes caused by disturbances and insufficient robustness of the traditional single-operator solving algorithm, a multi-operator constrained multi-objective evolutionary framework based on the deep Q-network was proposed. The algorithm described the convergence, diversity, and feasibility of the population in both the objective and decision spaces. It established …

Survey Of Cooperative Multi-Agent Path Finding, Jun Xiong, Wenbo Zhang, Zhi Xiong, Feng Zhou, Bo Yang

Journal of System Simulation

Abstract: Cooperative multi-agent path finding (Co-MAPF) has been widely applied in fields such as UAV formation and multi-agent systems, which enhances the overall system efficiency through task collaboration, path planning, and task execution among multiple agents. This paper introduced three main system architectures, namely centralized, distributed, and hybrid, along with their advantages and disadvantages based on the definition of the Co-MAPF problem, categorized, and reviewed mainstream Co-MAPF algorithms, including those based on sampling, search, intelligent optimization, and learning. Furthermore, this paper analyzed the main current challenges faced by Co-MAPF algorithms on the basis of summarizing existing research and outlined the …

Optimization Of Order Picking And Sorting Coordintion In “Goods-To-Person” System, Liang Ren, Zerong Zhou, Yunfeng Ma

Journal of System Simulation

Abstract: To improve the order picking and sorting collaboration with time windows in the "goods-to-person" system, a mathematical model aiming to minimize the number of sorting batches was established. With the characteristics of this issue considered, a hybrid variable neighborhood search (HVNS) algorithm based on the "classified loading" strategy was proposed for solutions. The numerical experimental results show that the HVNS algorithm can obtain high-quality solutions while shortening the solution time; different order structures have varying effects on the utilization of the loading capacity of sorting automated guided vehicles (AGVs); under the tested experimental conditions, the collaborative operation mode …

Interoperability Model And Application Of Military Training System For Combination Of Virtuality And Reality, Jianxing Gong, Hai Hu, Haihui Ren, Ruixiang Wu

Journal of System Simulation

Abstract: With the development of AI technology, VR technology, and combat simulation technology, in order to achieve the practical training effect of "how to fight and how to train soldiers", virtual and real training has become a widely popular military training mode. It has become a trend to integrate digital systems, virtual equipment, semi-physical models, physical models, and other heterogeneous systems to carry out training in the same training environment. Therefore, it is necessary to study the interoperability model and application of training systems for the combination of virtuality and reality. This paper proposed the definition of interoperability between virtuality …

Research On Infrared And Visible Light Fusion Method Based On Resnet-50 And Laplacian Filtering, Xiao Wang, Xiangyang Li, Feng Liang, Zhili Zhang

Journal of System Simulation

Abstract: In order to solve the problem that existing infrared and visible light image fusion techniques often suffer from artifacts caused by insufficient contrast, spectral distortion, and high computational complexity, a fusion framework based on ResNet-50 and Laplacian filtering was proposed. ResNet-50 was used to extract shallow and deep features, followed by multi-scale feature fusion. Laplacian filtering was applied to optimize feature information, and an automatic discriminator was introduced to further improve the fusion effect. Simulation results show that, compared with comparison algorithms, the proposed method achieves an average increase of 2.71% and 2.16% in information entropy, 5.98% and …

Analysis Of Optimal Spectral Bands For Thermal Infrared Hyperspectral Image Reconstruction Driven By Physical Simulation Model, Yonghao Yang, Xiaoyu He

Journal of System Simulation

Abstract: To achieve accurate reconstruction of thermal infrared hyperspectral images under limited spectral bands, this paper proposed a reconstruction method based on physical modeling and simulation. Semi-global decomposition algorithm was adopted to invert the thermophysical properties of the scenario based on the physical model of thermal radiation, simulating and generating full-band hyperspectral data. An optimal spectral band selection strategy driven by a physical model was proposed, which integrated the sensitivity of temperature inversion and the separability of material spectra. Experiments were conducted on both simulated and measured datasets to evaluate the performance of material identification, temperature inversion, and spectral …