Engineering Commons^™

Modeling Of A Microstrip Line Referenced To A Meshed Return Plane, Zeyi Sun, Jian Liu, Xiaoyan Xiong, Yuan Liu, Victor Khilkevich, Donghyun Kim, Daryl G. Beetner

Engineering Management and Systems Engineering Faculty Research & Creative Works

Transmission Lines Referenced to Meshed Return Planes Are Widely Used Because of the Physical Flexibility Imparted by the Meshed Plane. Poor Accounting for the Meshed Ground, However, Can Lead to Severe Signal Integrity and Radio Frequency Interference Issues. Full-Wave Simulation Can Characterize the Electrical Performance at an Early Design Stage, But It is Both Time and Computational Resource Consuming. to Make the Simulation More Efficient, a Method is Proposed in This Study to Model Transmission Lines with a Meshed Reference Ground using 2D Analysis. the 2D Analysis is Performed at Several Locations Along the Length of the Trace above the …

The Need For International Ai Activities Monitoring, Parviz Partow-Navid, Ludwig Slusky

Journal of International Technology and Information Management

This paper focuses primarily on the need to monitor the risks arising from the dual-use of Artificial Intelligence (AI). Dual-use AI technology capability makes it applicable for defense systems and consequently may pose significant security risks, both intentional and unintentional, with the national and international scope of effects. While domestic use of AI remains the prerogative of individual countries, the unregulated and nonmonitored use of AI with international implications presents a specific concern. An international organization tasked with monitoring potential threats of AI activities could help defuse AI-associated risks and promote global cooperation in developing and deploying AI technology. The …

Determinants Of Continuance Intention To Use Mobile Wallets Technology In The Post Pandemic Era: Moderating Role Of Perceived Trust, Shailja Tripathi

Journal of International Technology and Information Management

The Covid-19 pandemic amplified the volume and importance of mobile payments using digital wallets and placed a basis for their continued adoption. The objective of the study is to formulate and test a comprehensive model by integration of the technology acceptance model (TAM) and expectation confirmation model (ECM) with the addition of three constructs, namely perceived trust, perceived risk, and subjective norm, to identify the determinants of continuance intention to use mobile wallets. Questionnaire-based survey method was used to gather the data from 550 users having experience using mobile wallets for more than six months. The data were analyzed using …

A New Course In Defense Manufacturing – An Introduction To Shipbuilding, Alley C. Butler

Manufacturing & Industrial Engineering Faculty Publications

This paper discusses the development and deployment of a new course in DMEI (Defense Manufacturing Engineering Innovation) titled, “Introduction to Shipbuilding.” This course has been taught using Zoom since 2021 at both the University of Texas Rio Grande Valley, a Hispanic Serving Institution, and Virginia State University, a Historically Black University. After a brief literature review, an outline of the course is presented with topics including the maritime market for shipbuilding, economics of shipbuilding, the classification agencies, metallurgy and welding processes, ship structure and assembly, shipyard layout, accuracy control, and shipbuilding planning and scheduling. Difficulties in obtaining an appropriate textbook …

Model Based Systems Engineering With A Docs-As-Code Approach For The Sealion Cubesat Project, Kevin Chiu, Sean Marquez, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

The SeaLion mission architecture team sought to create a model-based systems engineering approach to assist improving CubeSat success rates as well as for the SeaLion CubeSat project to guide an implementation for the flight software. This is important because university CubeSat teams are growing in number but often have untrained students as their core personnel. This was done using a document-as-code, or docs-as-code, approach. With this the team created tools for the systems architecture with the Mach 30 Modeling Language to create an architecture that is easy to learn and use even for newly admitted team members with little to …

การประเมินราคาเครื่องจักรโดยใช้เทคนิคเดลฟายและกระบวนการวิเคราะห์เชิงลำดับชั้น, นัจนันท์ เลี่ยงทรชน

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อหาเกณฑ์การประเมินราคาเครื่องจักรที่เหมาะสม สำหรับการประเมินราคาเครื่องจักรตามแนวทางการเปรียบเทียบราคาตลาด โดยใช้กระบวนการวิเคราะห์เชิงลำดับชั้นในการกำหนดเกณฑ์และน้ำหนักความสำคัญ และใช้เทคนิคเดลฟายในการหาระดับของแต่ละเกณฑ์ การดำเนินงานวิจัยได้เริ่มจาก 1) ทำการสำรวจเกณฑ์การประเมินราคา 2) การสอบถามเชิงลึกถึงเกณฑ์ที่เกี่ยวข้องจากนักประเมินอาชีพ 3) สร้างผังโครงสร้างการตัดสินใจเชิงลำดับชั้นสำหรับการหาเกณฑ์ในการประเมินราคา 4) วิเคราะห์น้ำหนักความสำคัญจากกระบวนการวิเคราะห์เชิงลำดับชั้น 5) วิเคราะห์ระดับคุณสมบัติของเกณฑ์จากเทคนิคเดลฟาย 6) เปรียบเทียบผลการประเมินราคาเครื่องจักรด้วยวิธีเปรียบเทียบราคาตลาด งานวิจัยนี้ได้เลือกเครื่องกลึงโลหะ เครื่องผสมยาง ห้องเย็น เครื่องฉีดพลาสติก และเครื่องสีข้าว มาเป็นตัวแทนของกลุ่มอุตสาหกรรมในงานวิจัย โดยสร้างผังโครงสร้างการตัดสินใจเชิงลำดับชั้นการประเมินราคาประกอบด้วยเกณฑ์หลักทั้งหมด 6 เกณฑ์ เกณฑ์รอง 15 เกณฑ์ ผลจากการหาน้ำหนักความสำคัญของเกณฑ์ พบว่าเกณฑ์หลักที่มีน้ำหนักความสำคัญสูงในทุกเครื่องจักร คือ สภาพเครื่องจักร และประสิทธิภาพ ส่วนเกณฑ์รอง คือ สภาพความพร้อมใช้งาน เมื่อนำเกณฑ์หลักและเกณฑ์รองมาพิจารณาร่วมกัน ทำให้ได้เกณฑ์การประเมินราคาเครื่องจักรทั้งหมด 17 เกณฑ์ ที่มีค่าน้ำหนักความสำคัญของแต่ละเกณฑ์ในแต่ละเครื่องจักรแตกต่างกัน โดยน้ำหนักความสำคัญของเกณฑ์จะสัมพันธ์วัตถุประสงค์ของเครื่องจักรนั้นๆ อาจปรับเปลี่ยนมีความแตกต่างกันตามหน้าที่ของเครื่องจักร จากนั้นใช้เทคนิคเดลฟายในการหาระดับของแต่ละเกณฑ์ ซึ่งนักประเมินทั้งกลุ่มมีความเห็นชอบต่อการแบ่งระดับของแต่ละเกณฑ์ดังกล่าว เมื่อนำเกณฑ์ที่ได้นี้ไปใช้ในการประเมินมูลค่าของเครื่องกัดแนวตั้งและเครื่องฉีดพลาสติกเพื่อเป็นตัวอย่างการสร้างเกณฑ์ในงานวิจัยนี้ พบว่าสามารถลดความแตกต่างของมูลค่าเครื่องกัดแนวตั้งและเครื่องฉีดพลาสติก ของนักประเมินแต่ละคนได้ถึง 83.05% และ 97.56% ตามลำดับ

ตัวแบบการวางแผนจัดโปรโมชันลดราคาหลายช่วงเวลา สำหรับสินค้าร้านค้าปลีก, ชนิกานต์ ทั่งทอง

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อพัฒนาแบบจำลองทางคณิตศาสตร์ สำหรับการวางแผนจัดโปรโมชันลดราคาหลายช่วงเวลาสำหรับสินค้าในร้านค้าปลีกกรณีศึกษา ซึ่งปัจจุบันวางแผนการจัดโปรโมชัน โดยใช้ผู้มีประสบการณ์ ทำให้การจัดโปรโมชันแต่ละครั้งใช้เวลานาน ดังนั้นผู้วิจัยจึงนำเสนอแบบจำลองโปรแกรมเชิงเส้นจํานวนเต็มไบนารี ในการแก้ปัญหาภายใต้ข้อจำกัดต่างๆ โดยมีวัตถุประสงค์เพื่อเพิ่มผลกำไรรวมสูงที่สุด งานวิจัยนี้ใช้ตัวแบบการประมาณการยอดขายแบบลอการิทึม ในการประมาณการยอดขายรายเดือนและจำแนกกลุ่มสินค้าตามค่าความยืดหยุ่นของอุปสงค์ต่อราคา ผลการวิจัยพบว่าการจัดโปรโมชันโดยพิจารณารวมทุกกลุ่มกำไรพร้อมกัน สามารถให้ผลกำไรรวมได้ดีที่สุด โดยพัฒนาผลกำไรรวมเพิ่มขึ้น 1,194,517.75 บาท หรือคิดเป็น 3.94 เปอร์เซ็นต์ เมื่อเทียบกับการจัดโปรโมชันของร้านค้าปลีกกรณีศึกษาในปัจจุบัน และใช้เวลาประมวลผลได้เหมาะสม นอกจากนั้นผู้วิจัยได้ใช้วิธีจำลองสถานการณ์มอนติคาร์โล เพื่อจำลองสถานการณ์ค่าสัมประสิทธ์ของความยืดหยุ่นของอุปสงค์ต่อราคาเพื่อใช้ในการศึกษาผลกระทบของปัจจัยต่างๆ ผลจากการทดลองเชิงคำนวณพบว่าปัจจัยความยืดหยุ่นของอุปสงค์ต่อราคา เป็นปัจจัยที่สำคัญที่ต่อการเลือกประเภทความลึกของการลดราคาที่เหมาะสม นอกจากนั้นผู้วิจัยได้ทำการพัฒนาและสร้างแม่แบบในโปรแกรมเอ็กเซล เพื่อใช้ในการรับข้อมูลเพื่อส่งต่อไปยังโปรแกรม IBM ILOG CPLEX Optimization จากนั้นก็ทำการแปลงข้อมูลผลลัพธ์ของตัวแปรตัดสินใจกลับมาใน Excel ให้อยู่ในรูปแบบตารางที่ง่ายต่อการนำไปใช้งาน

Utilisation Des Ponts Élévateurs De Véhicules Hors Terre À Deux Colonnes : Identification De Déterminants Techniques De Stabilité Et Des Déterminants Du Travail Des Techniciens Automobiles, Damien Burlet-Vienney, Sylvie Beaugrand, Bertrand Galy, Maud Gonella, François Gauthier, Élise Ledoux, Isabelle Berger, Isvieysys Armas Marrero, Kariane Cusson Bertrand

Rapports de recherche scientifique

Cette recherche porte spécifiquement sur l’utilisation des ponts élévateurs de véhicules (PEV) hors terre à deux colonnes (HT2C). Les PEV HT2C sont utilisés par les techniciens automobiles lors de l’entretien et de la réparation des véhicules et les amènent à travailler sous ou à proximité d’une charge surélevée de plusieurs tonnes. La mort d’un jeune technicien en 2014 est à l’origine d’une concertation du secteur de la réparation automobile et de ces travaux de recherche. La chute d’un véhicule d’un PEV HT2C est le risque ciblé par cette étude.

De nombreux facteurs sont susceptibles de contribuer à la chute d’un …

Mitigating Supply Chain Disruptions In Retail Discount Department Stores, Anthony T. Patton

Walden Dissertations and Doctoral Studies

Supply chain disruptions can have adverse effects on business outcomes. Retail industry supply chain leaders are concerned with supply chain disruptions because supply chain disruptions can lead to dissatisfied customers and loss of profits. Grounded in game theory, the purpose of this multiple case study was to explore strategies four retail industry supply chain leaders in Northern Illinois and Northwest Indiana implemented to mitigate the effects of supply chain disruptions. Data were collected using semistructured virtual interviews with four retail industry supply chain leaders and a review of company documents. Through thematic analysis, four themes emerged: (a) choosing appropriate inventory …

Managing The Success Of Tpm Deployment & Sustainment In The Automotive Industry, Kevin Gembel

Wayne State University Dissertations

Maintenance has assumed increased importance in manufacturing as companies look for ways to gain an advantage over their competitors. The philosophical benefits of jointly implementing Total Productive Maintenance (TPM) programs in concert with other lean and quality programs have been discussed in the manufacturing literature. However, there is an absence of real-life implementation studies for objective assessment. To the best of our knowledge, this is the very first longitudinal study to investigate the implementation of TPM programs at a large global OEM across several regions and facilities using objective data collected across all key functions and outcomes. We study a …

Component Maintenance Strategies And Risk Analysis For Random Shock Effects Considering Maintenance Costs, Chao Zhang, Yadong Zhang, Hongyan Dui, Shaoping Wang, Mileta Tomovic

Engineering Technology Faculty Publications

Maintenance can improve a system’s reliability in a long operation period or when a component has failed. The reliability modeling method that uses the stochastic process degradation model to describe the system degradation process has been widely used. However, the existing reliability models established using stochastic processes only consider the internal degradation process, and do not fully consider the impact of external random shocks on their reliability modeling. Furthermore, the existing theory of importance does not consider the actual factors of maintenance cost. In this paper, based on the reliability modeling of random processes, the degradation rate under the influence …

A Diversity-Enhanced Memetic Algorithm For Solving Electric Vehicle Routing Problems With Time Windows And Mixed Backhauls, Jianhua Xiao, Jingguo Du, Zhiguang Cao, Xingyi Zhang, Yunyun Niu

Research Collection School Of Computing and Information Systems

The electric vehicle routing problem (EVRP) has been studied increasingly because of environmental concerns. However, existing studies on the EVRP mainly focus on time windows and sole linehaul customers, which might not be practical as backhaul customers are also ubiquitous in reality. In this study, we investigate an EVRP with time windows and mixed backhauls (EVRPTWMB), where both linehaul and backhaul customers exist and can be served in any order. To address this challenging problem, we propose a diversity-enhanced memetic algorithm (DEMA) that integrates three types of novel operators, including genetic operators based on adaptive selection mechanism, a selection operator …

Coordinating Multi-Party Vehicle Routing With Location Congestion Via Iterative Best Response, Waldy Joe, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

This work is motivated by a real-world problem of coordinating B2B pickup-delivery operations to shopping malls involving multiple non-collaborative logistics service providers (LSPs) in a congested city where space is scarce. This problem can be categorized as a vehicle routing problem with pickup and delivery, time windows and location congestion with multiple LSPs (or ML-VRPLC in short), and we propose a scalable, decentralized, coordinated planning approach via iterative best response. We formulate the problem as a strategic game where each LSP is a self-interested agent but is willing to participate in a coordinated planning as long as there are sufficient …

Computational Decision Support For Socio-Technical Awareness Of Land-Use Planning Under Complexity—A Dam Resilience Planning Case Study, Andreas Tolk, Jennifer A. Richkus, F. Leron Shults, Wesley J. Wildman

VMASC Publications

Land-use planning for modern societies requires technical competence as well as social competence. We therefore propose an integrative solution enabling better land-use planning and management through better-informed decision-making. We adapt a method developed for cross-disciplinary team building to identify the stakeholders and their various objectives and value systems. We use these results to populate artificial societies embedded into a dynamic data analytics framework as a tool to identify, explore, and visualize the challenges resulting from the different objectives and value systems in land-use planning and management. To prove the feasibility of the proposed solution, we present two use cases from …

An Ioe Blockchain-Based Network Knowledge Management Model For Resilient Disaster Frameworks, Amir Javadpour, Farinaz Sabz Ali Pour, Arun Kumar Sangaiah, Weizhe Zhang, Forough Ja'far, Ashish Singh

Engineering Management & Systems Engineering Faculty Publications

The disaster area is a constantly changing environment, which can make it challenging to distribute supplies effectively. The lack of accurate information about the required goods and potential bottlenecks in the distribution process can be detrimental. The success of a response network is dependent on collaboration, coordination, sovereignty, and equal distribution of relief resources. To facilitate these interactions and improve knowledge of supply chain operations, a reliable and dynamic logistic system is essential. This study proposes the integration of blockchain technology, the Internet of Things (IoT), and the Internet of Everything (IoE) into the disaster management structure. The proposed disaster …

Like You Search, Gipson Bachman

LMU Theses and Dissertations

As consumers continue to make their purchases solely online without visiting brick-and-mortar stores, they increasingly look for ways to “touch, feel and try on” products without actually doing so. We believe social media influencers provide a way to do this, with the influencers themselves acting as “stand-ins” for consumers in their place. Finding influencers that look like you in 2022 sounds like it would be easy, but it isn’t. Until now.

LIKE YOU aims to answer this gap in the market by creating a proprietary search engine that, through answering a few questions, recommends a list of influencers that can …

A Framework To Define And Quantify Leadership Styles Within Navy Engineering Units, Megan Praschak

Electronic Theses and Dissertations, 2020-2023

This study aimed to develop a framework for the U.S. Navy's leadership styles by assessing self-perceived leadership styles in a sample of reserve Engineering Duty Officers (EDOs) and the Senior Enlisted Leaders (SELs) in these technical units. Transformational and transactional leadership styles were examined using the Multifactor Leadership Questionnaire (MLQ) Form (Avolio & Bass, 2004), while the servant leadership style was analyzed using the Servant Leadership Self-Assessment Questionnaire (SLSQ) (Sandling, 2021). The effect of rank and the triad leadership position on leadership style was explored in this study. The survey was made available to all EDOs and SELs (n = …

Generalizable And Adaptable Data-Driven Methods For Overcoming Barriers To Practical Industrial Condition Monitoring, Matthew B. Russell

Theses and Dissertations--Electrical and Computer Engineering

The future of smart manufacturing relies on predictive maintenance systems that intelligently minimize expensive downtime through timely assessment of machine condition. Deep Learning (DL) has achieved excellent performance in industrial condition monitoring experiments, but the constraints of the manufacturing environment prevent many algorithms from being practically deployed on the factory floor. Ubiquitous sensing from online machines generates high velocity data streams that require new techniques for efficient transmission and storage. Despite these ever-increasing data lakes, many applications still lack the data needed for training DL fault diagnosis and wear tracking models since most data is unlabeled and only from nominal …

Modeling Behavior And Vaccine Hesitancy For Predicting Daily Vaccination Inoculations Using Trends, Case, Death, And Twitter Sentiment Data, Talal Daghriri

Electronic Theses and Dissertations, 2020-2023

Over the past 100 years, epidemiological models have evolved to incorporate greater facets of the process. With the advent of social networking, massive computational power, population sentiment analysis can now be added to the epidemiological modeling process. Sentiment analysis is greater understanding of the fears, uncertainties, motivation, and trends of the public with respect to vaccination and associated events. Lack of public confidence in the efficacy of models, safety of vaccines, and appropriateness of policies confounds vaccine inoculation prediction. Sentiment analysis of social media is a seminal technique that accesses shared users' contents and tweets on the Twitter platform for …

Techno-Economic Analysis And Optimization Of Hydrogen And Mechanical Energy Storage Systems, Pavitra Senthamilselvan Sengalani

Graduate Theses, Dissertations, and Problem Reports (ETD)

The increasing significance of renewable energy sources is thrusting the load cycling of fossil-fueled power plants (FFPP), designed to operate under nominal-load conditions. Integration of energy storage systems (ESS) with the FFPPs such as hydrogen energy storage (HES) and mechanical energy storage facility such as compressed air energy storage (CAES) shows the potential to minimize the levelized cost of electricity during high demand scenarios and also minimize the negative impacts of off-design FFPP operation. The deployment of energy storage facilities at the FFPP level have considerable potential advantages as they can be exploited within the existing equipment items and facilities …

Improving The Health And Safety Of Manufacturing Workers By Detecting And Addressing Personal Protective Equipment (Ppe) Violations In Real-Time With The Use Of Automated Ppe Detection Technology, Joseph Olufemi Fasinu

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Centers for Disease Control and Prevention (CDC) emphasized that Personal Protective Equipment (PPE) can significantly reduce the risk of occupational injuries and illnesses. However, improper use, failure to use, and other PPE-related violations can still result in injuries and fatalities. Eye and face protection violation has been one of the top 10 most frequently violated OSHA standards in fiscal years 2018, 2019, 2020, 2021 and 2022 consecutively. A common practice among safety professionals to ensure PPE compliance has been to physically inspect or monitor PPE usage among workers, which has been found to be unsustainable on a continuous real-time …

A Comparative Analysis Of Coastdown Testing Methods From An Electric Drive Unit Engagement Perspective Using A Student-Designed Parallel Hybrid Electric Vehicle, Dawson Everett Dunnuck

Graduate Theses, Dissertations, and Problem Reports (ETD)

Coastdown testing and road load determination are pivotal parts of the automotive design process. Vehicle manufacturers and independent companies perform and analyze road loads determined through a coastdown or similar method to determine a vehicle’s road load for modeling and EPA certification. For a traditional coastdown, the vehicle’s drivetrain must be disconnected through a clutch between the engine and the transmission while traveling at a high rate of speed to place the vehicle in neutral. This changes for hybrid and electric vehicles. Some hybrid, and most electric, vehicles delivered to customers do not have this clutch action to grant the …

Simulating Energy Performance Of Buildings: A Study Using Equest And Energy Star® Portfolio Manager, Sabin Wagle

Graduate Theses, Dissertations, and Problem Reports (ETD)

The urgent need for improving building energy efficiency in response to global warming and environmental sustainability has highlighted the importance of practical techniques to optimize energy performance. The study utilizes the eQUEST simulation engine and Energy Star® Portfolio Manager to evaluate retrofit and design parameters and conduct a sensitivity analysis to explore the impact of different parameters on building energy performance. The study develops building energy models in eQUEST using data from two fully operational Distribution centers. It is calibrated using the Normalized Mean Bias Error (NMBE) and Coefficient of Variation of Root Mean Square Error (CV(RMSE)) method, meeting the …

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

College of Graduate Studies: Theses & Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …

Higher-Order Effects In Biaxial Flexure Of Gfrp I-Section Beams, Zia Razzaq, Faridoon Z. Razzaq

Civil & Environmental Engineering Faculty Publications

A theoretical study of Glass Fiber Reinforced Polymer (GFRP) beams subjected to biaxial bending moments is presented with a focus on the influence of higher-order effects on maximum normal stresses. It is shown that the biaxial bending type of loading causes a dramatic increase in the maximum normal stress for a GFRP beam when induced torsional effects are included. The study demonstrates that the traditional first-order theory can grossly underestimate the maximum normal stress in a GFRP beam. Based on the numerical results presented using a higher-order theory which also accounts for induced warping normal stresses, the maximum normal stress …

Analysis Of The Psychological And Production Effects Of The Use Of Gamification For Manufacturing Assembly, Makenzie Dolly

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this dissertation, the applications of gamification for manufacturing with a focus on effects to workers and productivity were studied. Gamification is a relatively new research area, with the term being officially defined in 2010. Since then, several fields (education, health, and marketing) have benefitted from its application. Despite exhibiting strong potential, the application of gamification had remained rather unexplored in the manufacturing domain. To explore this further, by employing a comprehensive literature review, four research gaps were identified: the need for i) the use and acceptance of Deterding’s definition of gamification, ii) a clearer definition for various game element …

A Machine Learning Approach For Early Diagnosis Of Transthyretin Amyloid Cardiomyopathy Among Heart Failure Patients, Tanjim Ahmed

Graduate Theses, Dissertations, and Problem Reports (ETD)

Transthyretin Amyloid Cardiomyopathy (ATTR-CM) is a rare, progressive, and fatal disease. Prevalence of ATTR-CM ranges from 4 to 17 per 100000 cases where the mean survival time is less than 4 years. It has a history of being underdiagnosed and misdiagnosed. The diagnosis delay has a weighted mean of 6.1 years for wild-type ATTR-CM. Low awareness, the necessity of invasive procedures, and lack of treatment are the key reasons for delayed diagnosis. But, with the introduction of non-invasive tests like nuclear scintigraphy with ^99mTC-PYP and the disease modifying drug Tafamidis, the diagnosis delay signifies a missed opportunity to increase …

Evaluating Electrification Of Fossil Fuel-Fired Boilers For Decarbonization Using Discrete Event Simulation, Nahian Ismail Chowdhury

Graduate Theses, Dissertations, and Problem Reports (ETD)

Decarbonizing fossil fuel usage is crucial in mitigating the impacts of climate change. CO2, which comprises the major portion of greenhouse gas, is emitted from burning fossil fuels. One of the significant sources of fossil fuel user is industrial process heating, and most of the heating in industrial processes is achieved through boilers. Electrification is a promising solution for decarbonizing these boilers, as it enables renewable energy sources to generate electricity, which can then be used to power the electric boilers. The electrification of boilers can reduce greenhouse gas emissions, improve air quality, and increase energy efficiency. However, it requires …

Strategies Aircraft Manufacturing Organizational Leaders Use For Proper Material Pricing, Chin Kuei Jen

Walden Dissertations and Doctoral Studies

The lack of proper material pricing strategies can challenge manufacturers’ profitability and growth. Aircraft manufacturing leaders are concerned because understanding and developing material pricing strategies are essential to increasing profitability. Grounded in price theory, the purpose of this qualitative single case study was to explore strategies aircraft manufacturing organizational leaders use for proper material pricing estimates. The participants were four aircraft manufacturing organizational leaders from a successful aircraft manufacturing business located in the state of Georgia. Data were gathered from semistructured interviews and document reviews and analyzed using Yin’s five step approach. The four themes that emerged were the impact …

An Effective Transfer Learning Based Landmark Detection Framework For Uav-Based Aerial Imagery Of Urban Landscapes, Bishwas Praveen, Vineetha Menon, Tathagata Mukherjee, Bryan Mesmer, Sampson Gholston, Steven Corns

Engineering Management and Systems Engineering Faculty Research & Creative Works

Aerial imagery captured through airborne sensors mounted on Unmanned Aerial Vehicles (UAVs), aircrafts, satellites, etc. in the form of RGB, LiDAR, multispectral or hyperspectral images provide a unique perspective for a variety of applications. These sensors capture high-resolution images that can be used for applications related to mapping, surveying, and monitoring of crops, infrastructure, and natural resources. Deep learning based algorithms are often the forerunners in facilitating practical solutions for such data-centric applications. Deep learning-based landmark detection is one such application which involves the use of deep learning algorithms to accurately identify and locate landmarks of interest in images captured …