Engineering Commons^™

Dynamic Lot Sizing With Batch Ordering Using Simulated Annealing, Ahmed Ibrahim Hassan Aly

Archived Theses and Dissertations

No abstract provided.

Using Narrated Powerpoint Presentations For Distance Learning, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

Dr. Savory highlights his use of narrated powerpoint slides for the development of his distance education course. In addition,he highlight the strucutre and assessment approaches used for his course.

Predicting The Cost Per Flying Hour For The F-16 Using Programmatic And Operational Variables, Eric M. Hawkes

Theses and Dissertations

This research analyzes operational and programmatic data from all Air National Guard and 13 of 14 active duty F-16C/D Fighter Wings (FW) from 1998 to 2004 in search of explanatory variables that influence a wing's Cost Per Flying Hour (CPFH). Using data from both the Air Force Total Ownership Cost database and from the Air Force Knowledge Systems database, this research evaluates the predictive ability of the following nine explanatory variables: aircraft age, average sortie duration, MajCOM, base location, utilization rate, percent engine type, percent block, percent deployed, and previous year's CPFH, the last four of which were previously untested. …

Pnl Applied To Economics, Barbara Diaz, Tomohiro Takagi, Sema E. Alptekin

Industrial and Manufacturing Engineering

This work is a continuation of Zadeh’s research on Precisiated Natural language. Precisiated Natural Language (PNL) provides a system for computation and deduction of propositions expressed in a natural language. The importance of PNL for economics is discussed. The improved process of PNL is presented using a real world example from economics.

Executable Model Development From Architectural Description With Application To The Time Sensitive Target Problem, Luis M. Diaz Rodriguez

Theses and Dissertations

As the Department of Defense (DoD) moves to a capabilities-based approach for requirements definition and systems development, it has become necessary to conceptualize and evaluate our needs at the System of Systems (SoS) level. Desired capabilities are often achievable only through seamless integration of many different systems. As the classical systems engineering approaches are not suited to effectively handle the complexity of SoS level concepts, an architectures-driven approach has emerged as a way of defining and evaluating these new concepts. While the use of architectures for documenting and tracking interfaces and interoperability concerns is generally understood, architectural analysis and the …

A Case Study On Implementation Of Quality Function Deployment Into The Design Process Of A Small Job Shop, Benjamin A. Thomson

All-Inclusive List of Electronic Theses and Dissertations

The majority of research involving Quality Function Deployment (QFD) was focused on large consumer based companies and not small job shop business-to-business companies. This case study involved the implementation of QFD into the design process at Reynolds & Co., a small job shop in Terre Haute, IN. The specific objectives of the research were to find the QFD concepts that apply to the improvement of Reynolds & Co.'s (small job shop) design process. The next objective was to reduce the average design time associated with Reynolds & Co.'s design process. The final objective of this case study was to reduce …

Acuta Enews May 2005, Vol. 34, No. 5

ACUTA Newsletters

ln This lssue

Board Approves Slate of Nominees

From ACUTA Headquarters...................... Jeri A. Semer, CAE, ACUTA Executive Director

Tech Talk: Proxy Appliances Are Network Rules Enforcers................. Kevin Tanzillo, Dux PR

Nominate Now for ACUTA Ruth A. Michalecki Leadership Award

Volunteer at Annual Conference

Dues Notices to Mail May 2

Board Report...................... Carmine Piscopo, Providence College

Regional Workshop: Strategic Trade-offs in Campus Wireless Mobility

DC Update.................... Whitney Johnson, Retired, No. Michigan Univ.

Canadian Commission Says VoIP Must Have 911 Emergency Service

Welcome New Members

Web Tip: Listserv & Resource Library...................... Aaron Fuehrer, ACUTA Computer Services Mgr.

ACUTA Online Press Room

A Simulation Analysis Of Factors Influencing The Flexibility Of Cellular Manufacturing, Manocher Djassemi

Industrial Technology and Packaging

The performance of cellular manufacturing (CM) systems in a variable demand and flexible workforce environment has been examined using simulation modelling. Discrepancies between academicians and practitioners' findings with respect to flexibility and uneven machine utilization in CM systems are discussed. The views of two parties were incorporated in simulation models to rectify the existing discrepancies. While the results of this study confirm the previous findings of academicians regarding the deterioration of the performance of CM in a variable product mix situation, it appears that those results may be significantly influenced by considering a flexible workforce. The simulation results show that …

Development Of A Statistical Model For Process Control To Eliminate Sink Marks In Injection Molded Products, Kurt Frederick Hayden

Masters Theses

Customer demands for high-quality, defect-free injection-molded products are ever increasing. In order to satisfy these quality requirements, much effort is spent monitoring and controlling variable data such as cycle time, part weight, and dimensions. Attribute defects such as sink or splay are often overlooked in the development of process control systems. However, customers reject products because of these attribute defects. Industrial control systems based upon process variables and product design variables can detect conditions that may result in the molding of products with attribute defects. The systems can then correct the process prior to the molding of these defective products. …

The Effect Of Level Of Automation And Operator-To-Vehicle Ratio On Operator Workload And Performance In Future Uav Systems, Ryan J. Wasson

Master's Theses - Daytona Beach

The military intends to increase the number of UAVs in service while at the same time reducing the number of operators (Dixon, Wickens & Chang; 2004). To meet this demand, many of the current UAV operator functions will need to be automated. How automation is applied to modern systems is not fixed. Levels of automation exist along a continuum from fully manual to fully automatic. Two proposed levels of automation for future UAV systems are Management by Consent (MBC), where the operator selects the task to be executed, and Management by Exception (MBE), where the computer selects the task to …

Acuta Enews April 2005, Vol. 34, No. 4

ACUTA Newsletters

ln This Issue

Nominate Now for ACUTA Ruth A. Michalecki Leadership Award

From the President .................................Tamara Closs, Georgetown Univ,

Tech Talk: Make Sure Your VolP Equipment Stays Cool ........................... Kevin Tanzillo, Dux PR

Web Tip: Listserv & Resource Library ....................... Aaron Fuehrer, ACUTA Computer Services Mgr.

To Wire or Not to Wire New Construction............... Geoff Tritsch, Compass Consulting lntl. lnc.

Caller lD Spoofing: Another Kind of identity Theft....... Corinne Hoch, Nuala Hallinan, Columbia Univ.

DC Update......................... Whitney Johnson, Retired, No. Michigan Univ.

Board Report............................... Carmine Piscopo, Providence College

Welcome New Members

ACUTA Online Press Room

Modeling Multilevel Supply Chain Systems To Optimize Order Quantities And Order Points Through Mathematical Models, Discrete Event Simulation And Physical Simulations, Alok K. Verma

Mechanical & Aerospace Engineering Theses & Dissertations

Managing supply chains in today's distributed manufacturing environment has become more complex. To remain competitive in today's global marketplace, organizations must streamline their supply chains. The practice of coordinating the design, procurement, flow of goods, services, information and finances, from raw material flows to parts supplier to manufacturer to distributor to retailer and finally to consumer requires synchronized planning and execution. Efficient and effective supply chain management assists an organization in getting the right goods and services to the place needed at the right time, in the proper quantity and at acceptable cost. Managing this process involves developing and overseeing …

Quantifying Vulnerability To Critical Infrastructure, Barry Charles Ezell

Engineering Management & Systems Engineering Theses & Dissertations

Military and civilian leaders have the responsibility to protect our Nation's critical infrastructure, communities, and symbols of American power from terrorists, home and abroad, as well as from natural disasters. To this end, assessments are conducted to reduce vulnerability. The literature offers multiple definitions of vulnerability and measurement has not been adequately addressed. Thus, the purpose of this research has been to develop and deploy a systems-based model that quantifies vulnerability to critical infrastructure. This research defines critical infrastructure vulnerability as a measure of the susceptibility of critical infrastructure to threat scenarios. Vulnerability is a function of (1) threat scenario, …

A Method For Classification Analysis On Simultaneous Product Defects, Jason S. Trahan

Masters Theses

There have been many advancements that share similar tools and techniques that help reduce the manufacture of nonconformities. These include computer-aided analysis, design reviews, total quality management, multivariate analysis, process monitoring and control, and root cause analysis to mention a few.

This work details the methodology developed for manufacturing companies to predict attribute defects. Injection molding was used to demonstrate the proposed methodology. Data were collected on a variety of tool design and construction attributes thought to affect the performance of a tool. The independent variables consisted of categorical and numerical data types. The dependent variable was a nominal four-tuple …

A Systems Methodology For Measuring Operational Organization Effectiveness: A Study Of The Original Equipment Computer Manufacturing Industry, 1948 To 2001, Teddy Steven Cotter

Engineering Management & Systems Engineering Theses & Dissertations

Optimizing operational organizational effectiveness is the central, although often unstated, goal of engineering management and systems engineering research and applications. Two fundamental problems remain to be addressed in pursuit of this goal. First, despite over fifty years of research in various disciplines, there is still no universally accepted definition of organizational effectiveness. Second, no methodology exists to identify the domains, dimensions, and determinants of operational organizational effectiveness and dynamically model operational organizational effectiveness within a given population.

This research synthesizes a systems engineering methodology for identifying the domains, dimensions, and determinants of and dynamically modeling operational organizational effectiveness for an …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design: Quarterly Progress Report January 1-March 31, 2005, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The Advanced Fuel Cycle Initiative (AFCI) and Transmutation Research Program-University Participation Program (TRP-UPP) supported by Department of Energy of the United States have been developing many important technologies for the transmutation of nuclear waste to address long-term disposal issues. While successfully embedding AMUSE module into a dedicated System Engineering Model (TRPSEMPro), developed by the Nevada Center for Advanced Computational Methods (NCACM) at the University of Nevada-Las Vegas collaborating with Argonne National Laboratory (ANL), ANL is interested in further simulating the Light Water Reactor (LWR) Spent Fuel Treatment Facility (SFTF) combining commercial process simulation and analysis packages and core calculation of …

F-111 Systems Engineering Case Study, Air Force Center For Systems Engineering, G. Keith Richey

AFIT Documents

The systems engineering lessons from the F-111 program will facilitate learning by emphasizing practical applications and resulting outcomes to the current processes and tools used on today s programs. The student will understand the long-term consequences of systems engineering as implemented on the F-111 and its effect on cost, schedule, and operational effectiveness. The reader can then postulate outcomes of alternate decisions at the program/system level.

Acuta Enews March 2005, Vol. 34, No. 3

ACUTA Newsletters

In This Issue

From ACUTA Headquarters............................ Jeri A. Semer, CAE, ACUTA Executive Director

Did You See the Post?

Nominate for ACUTA Board of Directors

Tech Talk: Holographic Storage................... Kevin Tanzillo, Dux Public Relations

Abandoned Cable May take Unexpected Bite.................. Frank Bisbee, www.wireville.com

Board Report.................... Carmine Piscopo, Providence College

ACUTA Member Sites to See

Web Tip: Questions, Anyone?....................... Aaron Fuehrer, ACUTA Computer Svcs. Mgr.

DC Update..................... Whitney Johnson, Retired, Northern Michigan Univ.

Welcome New Members

ACUTA Online Press Room

Developing New Multidimensional Knapsack Heuristics Based On Empirical Analysis Of Legacy Heuristics, Yong Kun Cho

Theses and Dissertations

The multidimensional knapsack problem (MKP) has been used to model a variety of practical optimization and decision-making applications. Due to its combinatorial nature, heuristics are often employed to quickly find good solutions to MKPs. While there have been a variety of heuristics proposed for the MKP, and a plethora of empirical studies comparing the performance of these heuristics, little has been done to garner a deeper understanding of heuristic performance as a function of problem structure. This dissertation presents a research methodology, empirical and theoretical results explicitly aimed at gaining a deeper understanding of heuristic procedural performance as a function …

Decision Analysis Using Value-Focused Thinking For Infrastructure Prioritization, Mona A. Tenorio

Theses and Dissertations

Infrastructure systems and facilities have deteriorated due to the impact of limited defense funding and competing priorities within the Air Force. The current method used for infrastructure prioritization is influenced by political sensitivity and uncertainty regarding the consequences of various funding decisions. Senior leaders need to better understand how their funding decisions will impact the overall condition and service life of the installation's infrastructure systems and facilities. The purpose of this research was to improve the method of prioritizing infrastructure projects through the use of a decision analysis methodology known as Value-Focused Thinking. The value model was created based on …

An Analysis Of The Relationship Between Environmental Management And Environmental Compliance At Marine Corps Installations, Bevin J. Keen

Theses and Dissertations

Environmental compliance on military is challenging for a number of reasons, including the complexity of regulations, and the variety of operations which impact the environment. At times, public concerns and penalties stemming from environmental issues has infringed upon the United States Marine Corps' (USMC) ability to use all installation resources without restriction. This thesis examines which facets of environmental management are closely associated with high levels of compliance. Five variables of interest: Total Compliance, Total Management, Audit Management, Policy Management, and Training Management were isolated from 1998-2004 USMC environmental audit data, and subjected to statistical analysis. Through the examination of …

Exploratory Inquiry: Disparate Air Force Base Area Network Architectures, Charlie W. Boyd Jr.

Theses and Dissertations

Joint Vision 2020, the Department of Defense (DoD) blueprint for development and transformation, identifies information and technology as critical enablers for our nation's military and calls for the development of a joint force capable of integrated information sharing to provide decision superiority, the ability to make and implement better decisions before enemies can react (DoD, 2000). Networks have been identified as the single most important element for transforming our current military forces. Ironically, Air Force base-level communications networks have been identified as a weakness. This research follows the qualitative approach to increases the current understanding of base level communications networks …

Medical Devices, Support Networks, And Their Vulnerabilities: A Case Study Of The Integration Of Medical Networks Into The Air Force Information Network, Paul G. Oleksiak

Theses and Dissertations

With the implementation of "one Air Force, one network" under way it is important to look at how the Air Force plans to incorporate the medical field and its unique systems, networks, and mission. The medical field presents distinctive problems not seen in other areas. Open network vulnerabilities in the medical information systems not only pose a problem for the individual, but to the military service also. Possible security holes provide both access to vital military & personal information (end strength numbers, current status of personnel, social security), and a door way into the "network". Intruders now can possibly access …

Assessing The Usefulness Of The Decision Framework For Identifying And Selecting Knowledge Management Projects, Kevin G. Budai

Theses and Dissertations

Knowledge management (KM) is becoming recognized as a valuable tool for the Department of Defense (DoD) in its effort to maintain a competitive, strategic advantage against its enemies in a new threat environment. Decision superiority is the ultimate end result and is only possible through the effective and efficient use of its chief key resource--knowledge. As the Air Force seeks to transform the way it does business the concept of knowledge management has made its way to the forefront of both the Air Force's Information Strategy and Information Resource Flight Plan. This research assesses the usefulness of a knowledge management …

A Study To Determine Damage Assessment Methods Or Models On Air Force Networks, Lisa S. Thiem

Theses and Dissertations

Damage assessment for computer networks is a new area of interest for the Air Force. Previously, there has not been a concerted effort to codify damage assessment or develop a model that can be applied in assessing damage done by criminals, natural disasters, or other methods of damaging a computer network. The research undertaken attempts to identify if the Air Force MAJCOM Network Operations Support Centers (NOSC) use damage assessment models or methods. If the Air Force does use a model or method, an additional question of how the model was attained or decided upon is asked. All information comes …

Status Of Department Of Defense Architecture Framework (Dodaf) Implementation Within The Aeronautical Systems Center (Asc), Chad A. Millette

Theses and Dissertations

The purpose of this research was to identify the current status of the use of the Department of Defense Architecture Framework (DoDAF) systems architecture products within the Aeronautical Systems Center (ASC) program offices. There are regulatory requirements dictating the creation of DoDAF products as annexes to programmatic documentation, such as the Joint Capabilities Integration Development System (JCIDS) requirement for systems architectures as annexes for acquisition milestone decision documentation. In addition, the DoDAF itself identifies several products as being highly applicable for the development of acquisition strategies. This thesis investigated the use of systems architectures, and particularly DoDAF products, within the …

A Systems Architectural Model For Man-Packable/Operable Intelligence, Surveillance, And Reconnaissance Mini/Micro Aerial Vehicles, Cory A. Cooper, Matthew L. Ewoldt, Steaven A. Meyer, Edward W. Talley

Theses and Dissertations

With the increase in both technology push and operational pull of mini/micro aerial vehicles (MAVs) within DoD organizations, an understanding of their interactions and capabilities is necessary. Many MAVs have already been developed for a specific usage and much speculation has been made on their future uses. Despite the growth of MAVs, there is currently no overarching systems architecture which would envelop and guide the DoD's MAV development efforts. The goal of this thesis is to apply sound systems engineering principals to develop a MAV architectural model describing their use in three separate but closely related mission areas: Over-the-Hill-Reconnaissance, Battle …

Comparing Management Approaches For Automatic Test Systems: A Strategic Missile Case Study, William C. Ford

Theses and Dissertations

From 1980 to 1992, the DoD spent over $50 billion acquiring Automatic Test Systems (ATS) used to test weapon systems. At that time, procuring unique ATS to support single weapon systems was the norm. In 1994, the DoD made a dramatic change to their ATS acquisition policy; common ATS that supported multiple weapon systems was preferred over ATS tailored to support a single weapon system. Expected benefits of this new policy included: more reliable equipment, increased supportability, decreased cost, smaller logistics footprint, and decreased manning. To date, the common ATS initiative has garnered little support AF-wide due to lack of …

Output Analysis And Comparison Of Deployment Models With Varying Fidelity, Matthew M. Gill

Theses and Dissertations

This thesis explores the changes in insights that result from using different types of models to assess the capability of deploying the Stryker Brigade within specific timeline goals. The thesis uses as its primary base a study conducted in 2002 by USTRANSCOM to evaluate the ability of Stryker to meet stated deployment timeline goals. Specifically, the author compares the outputs from four different models as they change over three different deployment scenarios and 10 different routes. The study investigates the relationships among the outputs of spreadsheet models, spreadsheet models with elements of variability added, and low- and high-level discrete-event simulations. …

Determining Pacaf Transportation Alternatives To The General Purpose Vehicle, Andrew H. Pate

Theses and Dissertations

Vehicle fleets under gird the mission of Air Force bases. Under funding for vehicle replacement requirements raised concerns and has led to purchasing alternative vehicles classified as equipment items to supplement budget shortfalls. In order to effectively use funds and meet mission requirements, Pacific Air Force (PACAF) commanders need an adjustable multifactor decision tool that will allow them to make an informed purchasing decision from among appropriately classified equipment item vehicles. This research will discuss existing regulatory restrictions to alternative transportation purchases, consider available alternative vehicles, and determine the attributes important to vehicle purchases. A review of current Air Force …