Engineering Commons^™

Optimization Of Flow For Plastic Pbt With 45% Glass And Mineral Fiber Reinforcement In An Injection Over Mold Process Using Taguchi, Cpk And Mold Flow Simulation Software Approaches, Israel Sanchez

Open Access Theses & Dissertations

This Thesis analyze the plastic injection molding parameters in order to identify which parameters significantly affects the flow properties of Polibuthylen Thereptalate with 45% glass/mineral reinforcement, and which levels are the best to use for those parameters. With the purpose of optimizing the plastic flow conditions in an injection mold to obtain parts free from short shots (term used to describe a plastic part that is incomplete due to the poor plastic flow in the mold runners and cavities).

The used approach is Taguchi design of experiments to define which parameters have significant effect on the response variable, and the …

Using Two Channel Communication To Study Selective Auditory Attention Using Air And Bone Conducted Interfaces, Kutbi Nuruddin Kaliyakuwawala

Browse all Theses and Dissertations

The purpose of this study was to evaluate the human capability to use selective auditory attention across the two different hearing pathways, air conduction and bone conduction. Four two channel communication systems were used as a basis for comparison: (1) both channels presented via headphones (left ear and right ear each represent a different channel), (2) two channels presented via loudspeakers placed at 135° and 225°, (3) one channel presented via headphones (both ears) and one channel to bone vibrator (placed at the condoyle), and (4) one channel presented via bone vibrator and one channel via loud speakers (placed at …

The Effects Of Depth And Eccentricity On Visual Search In A Depth Display, George Angelo Reis

Browse all Theses and Dissertations

The attribute of depth has been shown to provide saliency or conspicuity for items in a visual search task. Novel displays that present information in real physical depth offer potential benefits. Previous research has studied depth in visual search but depth was mostly realized without real physical separation of display elements. This study aimed to better understand the effects of real physical depth and eccentricity on visual search in a depth display. Through this understanding, we can appropriately utilize this new technology. An experiment was conducted to test four hypotheses regarding how depth, eccentricity, target feature, and screen location would …

Application Of Modern Principles To Demand Forecasting For Electronics, Domestic Appliances And Accessories, Gregory Daniel Noble

Browse all Theses and Dissertations

Royal Philips is a large scale producer of consumer electronics, personal appliances, lighting, and healthcare appliances. Demand data from 12 Business Units (BU) of Royal Philips was examined in the study; four business units from each of three divisions: DAP, PA, and CE. From the data supplied, different forecast techniques were evaluated to determine which procedure produces the highest quality forecasts. Three forecasting techniques were evaluated using the provided data. The three forecasting techniques evaluated are the exponential smoothing forecasting method, the exponential smoothing with a linear trend forecasting method, and the Winters forecasting method.

The Visual Basic for Applications …

Integrated Faceted Browser And Direct Search To Enhance Information Retrieval In Text-Based Digital Libraries, Shea-Tinn Yeh

Browse all Theses and Dissertations

Browsing and searching are two prominent paradigms in information retrieval. In current digital library implementations, exploratory browsing is sometimes not available as an option. When offered, it is commonly presented as an alphabetical listing of chosen categories depending on the scope of the digital collections. In addition, users have to switch between different information spaces for browsing and searching. This research proposes an information retrieval paradigm of integrated faceted browser and direct search interfaces for text-based digital libraries. Experimental results show that compared to a conventional alphabetical browser, the faceted browser can significantly improve the effectiveness (by 30.8%, p = …

Gathering Cows Using Virtual Fencing Methodologies, Dean M. Anderson, Marek Doniec, Carrick Detweiler, Iuliu Vesilescu, Daniela Rus, Barbara Nolen, Roy Libeau

School of Computing: Conference and Workshop Papers

Free-ranging livestock are classically controlled by herders. Holding, moving, or gathering free-ranging cattle requires flexible husbandry practices for efficient and effective lowstress animal management. Behavioral theory and practical experience indicates cattle can be taught to respond to auditory cues. Preliminary research has demonstrated that cows can be gathered autonomously using recorded audio cues associated with manual gathering. However, efficient gathering requires movement in the proper direction. Therefore, we believe using audio cues administered from directional virtual fencing (DVF™) equipment can facilitate proper animal orientation and facilitate the gathering of animals with minimal human intervention. Results from applying directional audio cues …

Egypt's Information Society Strategy: A Critical Lexicography, Neil Mcbride, Bernd Carsten Stahl

Journal of International Technology and Information Management

The development of ICT policies within developing countries in the past ten years has opened up a new area for study. These documents chart the ambitions of the countries for the use of ICT to promote rapid development. As such they are intercultural documents, developing at the interface between the culture of the country and western economic culture. This paper develops a critical approach to understanding these documents and studying their message. The approach involves the preparation of a critical dictionary which identifies relevant terms within the ICT policy document and reflects on their multiple meanings. The approach was applied …

Usability Investigation Of E-Business Web-Based Forms, Gerald V. Post, Albert Kagan, Betsy Page Sigman

Journal of International Technology and Information Management

Usability on Web sites is critical because almost no training is provided for users on commercial sites. Instead, Web design relies on standards and consistency across sites. Traditional usability results indicated that computer forms should follow paper-based forms. Yet, Web paradigms have evolved that are quite different from paper-based forms. Specifically, this study reveals that users commit fewer errors and prefer simple forms limited to a single concept per screen. This conclusion significantly alters the recommendations for designing business forms.

Formal Verification Of Urban Traffic System Using The Concept Of Fuzzy Workflow Simulation, Manuj Darbari, Abhay Kumar Srivastava, Sanjay Medhavi

Journal of International Technology and Information Management

Modeling complex urban traffic system requires extensive use of workflow methodologies which can simulate almost real time traffic situations. Number of studies were done in the field of Urban Traffic Simulation like PLOTS, NETSIM and PALAMICS but none of them could provide a real formal solution. Our paper proposes a methodology using Fuzzy Petri nets for modeling real time traffic system. Fuzzy Petrinets are also visualised and tested by using Flow- Charter and HPSIM software packages. These packages help in providing successive iterations of process model for further refinement.

Supporting The Virtual Community: Social Bookmarking As A User- Based Classification Scheme In A Knowledge Library, Nicole Lytle, Tony Coulsom

Journal of International Technology and Information Management

Knowledge libraries hold the promise of widespread access to information available anywhere, anytime, freeing patrons from the geographical and temporal boundaries that currently exist. The classification of materials and subsequent searching of knowledge library content is an overall problem with many complex parts. Relevant classification is important for optimal information retrieval. This is especially important for the virtual communities that exist with extended organizations. Rooted in the virtual community and digital library literature, this paper develops a theory for improving the information classification and retrieval process of knowledge libraries that support virtual communities by applying social bookmarking techniques.

Rapid Development Of Multimedia Instructional Modules For Information Technology Education, Nanda Ganesan

Journal of International Technology and Information Management

A multifaceted learning model was developed for implementing e-learning in a largely commuter campus. The primary objective of the model was to build a flexible learning environment that combined the learning effectiveness of in-class learning with the flexibility and accessibility of online learning. One of the components of the model was the multimedia instructional modules produced to teach various Information Technology courses. Several different types of modules were produced representing chalk-and-talk type of lectures, PowerPoint presentations and software tutorials. The chalk-and-talk type of lecture modules and the software tutorials that emulated the in-class learning experience contributed positively towards enhancing the …

Can Information Systems Foster Emotional Intelligence? A Design Theory-Based Approach, Richard J. Burkhard, Thomas A. Horan, Brian N. Hilton, Michael Leih

Journal of International Technology and Information Management

Researchers in Information Systems (IS) have conducted extensive research into various kinds of collaboration systems over the last twenty-five years. A parallel stream of inquiry in psychology and management has developed research in organizational Emotional Intelligence, which contributes to the effectiveness of group interactions by increasing cooperation and reducing conflict. Collaboration systems present a special opportunity to introduce soft management functions such as Emotional Intelligence because they are designed as an intelligent channel of interaction between group members. This research used an Information Systems Design Theory approach to guide the integration of Emotional Intelligence functions into collaboration systems. Two artifact …

Business Risks: When Is Fails To Detect Circumvention Activities, Stanley X. Lewis Jr., J. Scott Magruder, Eddy J. Burks, Carl Smolinski

Journal of International Technology and Information Management

A business must recognize and address various risk factors when establishing and maintaining its information system. The overall risk to management is that the control environment does not protect proprietary business data and the financial reporting system that produces financial statements and other information used by investors, creditors and regulatory agencies. These risks require that management implement efforts to ensure the integrity and effectiveness of control procedures over business activities while being aware of additional system issues such as failing to adequately consider other risks which are more business-oriented including the risk of failing to prevent or detect fraudulent or …

Analysis Of Possible Use Of Identification Technologies In Disassembly, Vukica Jovanović, Sreten Filipović, Gordana Ostojić, Stevan Stankovski, Milovan Lazarević

Engineering Technology Faculty Publications

The barcodes and Radio Frequency Identification tags that are being used during manufacturing, assembly, warehousing, and distribution could also be reused at the end of the product lifecycle for an identification of the correct disassembly process that would result in recycling of its components. The barcodes or RFID tags can be helpful in identifying objects in terms of sustainable development, regarding disassembly, recycling and reuse. In this paper, the analysis of the current applications of RFID Technology in the final phase of the product lifecycle will be presented. The simulation of the disassembly process supported by both barcode and RFID-enabled …

Effect Of Truck Vibration During Transport On Damage To Fresh Produce Shipments In Thailand, V. Chonhenchob, S. Sittipod, D. Swasdee, P. Rachtanapun, S. P. Singh, Jay A. Singh

Industrial Technology and Packaging

The increase in global trade allows packaged products to be shipped across borders using inter-modal transportation. Trucks are still the most prevalent mode for surface shipments and time sensitive transport perishable products such as fresh produce. This study focused on measuring the transportation environment in truck shipments from various packing houses to major retail distribution centers in Thailand and then the subsequent distribution to regional stores in smaller trucks. Test measurements were compared to test methods used in North America and Europe. This study compared the quality of cabbage, lettuce, plums and pears after being shipped in truck transport by …

Performance Of Pre-Cut Lettuce Packaged In Biodegradable Film Formed On Commercial Vertical-Form-Fill-And-Seal Machines, J. Wyatt Brown, Keith Vorst, Shasta Palmer, Jay A. Singh

Industrial Technology and Packaging

The purpose of this study was to determine the feasibility of using biodegradable films suitable for fresh-cut lettuce with commercial vertical-form-fill-and-seal packaging machines (VVFS) equipped with heat-sealing bars. Biodegradable high-density polyethylene (BHDPE) and polypropylene (BPP) films were tested. Commercial bags of pre-cut Romaine sealed in a polyethylene/oriented polypropylene (PE/OPP) bag formed on a WFS machine were used as the control. All bags were held at 4.4°C, 80% RH and assessed for reduction in quality during storage per a commercial (in-house) standard utilized by a large pre-cut salad packer in Salinas, California. When the biodegradable films were sealed with a VFFS …

Emergence Of Multitasking Machining Systems: Applications And Best Selection Practices, Manocher Djassemi

Industrial Technology and Packaging

Purpose –Multitasking machining (MTM) systems have become increasingly sophisticated and expensive capital equipment. The lack of practical guidelines for selection of these machines can lead to significant undesirable machine attributes, application mismatch, and longer return on investment. The purpose of this paper is to provide an insight to numerous features and configurations of MTM systems and to present several application-based selection guidelines.

Design/methodology/approach –A taxonomy of MTM systems is developed based on the number of axes of motions, tooling and spindle systems. Practical guidelines for general and advance features are presented with special regard to multi-axis and multi-spindle …

Computer-Based Approach To Material And Process Selection, Manocher Djassemi

Industrial Technology and Packaging

Purpose – The purpose of this paper is to provide a perspective of computer-aided material and process selection (MPS) software tools for product development purpose and present a practical approach for manufacturers and other decision makers involved in MPS.
Design/methodology/approach – A multi-criteria deductive approach for MPS is applied to a case study by taking into account the technical performances and environmental constraints. A resource-based cost modeling is also deployed to examine the implication of selected material and process on overall product cost.
Findings – The paper demonstrates the capabilities and shortcoming of existing computerized MPS software tools in assisting …

A Study Of The Effect Of Pictorial Markings And Warning Labels On Handling Of Packages In The Dhl Single-Parcel Environment, Jay A. Singh, Sher Paul Singh, T. Voss, K. Saha

Industrial Technology and Packaging

Over the past two decades, there has been a heavy influx in the number of direct-to-consumer express shipments of packaged products. As a consequence, parcel delivery companies, such as DHL, FedEx and UPS, have strengthened their presence in air transport. This study measured and analysed the effect of moving single packages through air shipments in the USA using one of the newest service providers, DHL. The study also quantified the effect of placing pictorial markings and warning labels on mid-sized and lightweight packages when using Next-Day and 2nd Day services provided by the carrier DHL. Instrumented packages measuring 0.38 m …

Dynamic Modelling Of Reconfigurable Manufacturing Planning And Control Systems Using Supervisory Control, Ahmed M. Deif, Waguih H. Elmaraghy

Industrial Technology and Packaging

This research is concerned with studying the dynamic performance of reconfigurable Manufacturing Planning and Control (MPC) systems. Such goal requires two main tasks. The first task is to develop a dynamic MPC system model that has the ability to reconfigure to different MPC policies. The second task is to design a supervisory control unit that has as input the high level strategic market decisions and constraints together with a feedback of the current manufacturing system state and then select the optimal suitable operation mode or policy at these conditions. This paper addresses the first task of the proposed research and …

Optimization Of Lifeguard Towers, Equipment, And Sign Placement With Human Factors Considerations For The Cal Poly Recreation Center Expansion, Brian J. Henrikson

Industrial and Manufacturing Engineering

Cal Poly’s Recreation Center serves many faculty, students and alumni by providing them with a safe and fun environment to work out and swim. An overwhelming majority of students voted for a Recreation Center expansion to handle the increased usage of the Center over the past few years. The focus of this report is the safe and effective operations of the pool deck and the lifeguard staff. Three surveys were created to see what the lifeguard staff, as well as pool users, thought about the current pool deck and what they would like to see in the new pool deck …

Developing Sustainable Spacecraft Water Management Systems, Evan A. Thomas, David M. Klaus

Mechanical and Materials Engineering Faculty Publications and Presentations

It is well recognized that water handling systems used in a spacecraft are prone to failure caused by biofouling and mineral scaling, which can clog mechanical systems and degrade the performance of capillary-based technologies. Long duration spaceflight applications, such as extended stays at a Lunar Outpost or during a Mars transit mission, will increasingly benefit from hardware that is generally more robust and operationally sustainable overtime. This paper presents potential design and testing considerations for improving the reliability of water handling technologies for exploration spacecraft. Our application of interest is to devise a spacecraft wastewater management system wherein fouling can …

Lean Erp Systems: Existence And Viability In Today's Manufacturing Industry, Miroslav Djuric

Master's Theses

This thesis evaluates the existence and viability of lean ERP systems in today’s manufacturing industry. Results from the research show that current practitioners of lean – who also utilize ERP systems – do not have a strong enough link between the two to consider their ERP systems, and overall organizations, as being truly lean.

Few articles and research papers in today’s body of knowledge contain information on the concept of lean ERP. A survey, sent to numerous industry professionals and posted on lean manufacturing websites, provided the results necessary for statistical analysis. The conclusions obtained from this survey analysis provided …

An Integrated Probability-Based Approach For Multiple Response Surface Optimization, Okay Isik

Engineering Management & Systems Engineering Theses & Dissertations

Nearly all real life systems have multiple quality characteristics where individual modeling and optimization approaches can not provide a balanced compromising solution. Since performance, cost, schedule, and consistency remain the basics of any design process, design configurations are expected to meet several conflicting requirements at the same time. Correlation between responses and model parameter uncertainty demands extra scrutiny and prevents practitioners from studying responses in isolation. Like any other multi-objective problem, multi-response optimization problem requires trade-offs and compromises, which in turn makes the available algorithms difficult to generalize for all design problems. Although multiple modeling and optimization approaches have been …

Analysis Of Factors Causing Failure Mode For Automotive Hitch Control System Calibration In Agriculture Equipment, Setordji Yao Abotsi

Dissertations and Theses @ UNI

Traditionally, agricultural tractors have used hydro-mechanical draft control systems to mechanically sense implement draft. Technological development of low cost, reliable microprocessors has contributed to allowing greater flexibility in designing agricultural tractor control systems (Rutkowski & Welchens, 1986). To successfully control the depth of which an implement penetrates the ground, it has become imperative to incorporate a draft control system on agricultural tractors. The control system operates by responding to the draft load or force acting on the tractor. Increasing the draft load or force allows the implement to be raised and decreasing the draft load or force allows the implement …

Preliminary Investigation Of Metallurgical Structure And Mechanical Properties Of Cast Iron With High Aluminum Content, Pavel Bizyukov

Dissertations and Theses @ UNI

The problem addressed in this study analyzed various properties of cast iron with high aluminum content. This grade of cast iron was projected for use in the automotive industry. The benefits provided with high aluminum content are lower specific gravity and relatively inexpensive source materials with the potential of achieving high temperature properties.

The purpose of the study was to select suitable source materials and determine an effective melting technique, to investigate metallurgical structure and mechanical properties at given chemical composition, and, finally, to provide elaborate results.

The design of the experiment included the following steps: (a) selection and preparation …

Improving The Design Of Low Volume Sealed Roads In Tanzania, Mfinanga A

Tanzania Journal of Engineering and Technology (TJET)

The main objective of the study was to identify appropriate road designs for Low Volume Sealed Roads (LVSRs) with the aim of improving the design of such roads in Tanzania. The study was conducted in Dar es Salaam and Morogoro regions in Tanzania where data for LVSRs were collected from primary and secondary sources in the two regions. The study found that by using an improved pavement design method specifically meant for LVSRs results in cost savings for LVSRs of up to 51% compared with the conventional method of pavement design in Tanzania. The study recommends that the pavement design …

The Effect Of Rotation And Temperature On The Inhibition Performance Of Cashew (Anacardium Occidentale L.) Nut Shell Liquid On Co2 Corrosion Of Carbon Steel, J Mutasingwa

Tanzania Journal of Engineering and Technology (TJET)

A natural extract of cashew nut shells, Cashew Nut Shell Liquid (CNSL) was investigated as a corrosion inhibitor for carbon steel in 3% NaCl solutions saturated with CO2 gas using electrochemical techniques (i.e. potentiodynamic polarization and ac-impedance). The investigation was performed at different temperatures under static and dynamic conditions using a Rotating Disk Electrode (RDE). It was found that CNSL reduces the electrochemical processes taking place on carbon steel undergoing corrosion. The percentage inhibitor efficiency increases with increase in CNSL concentration and decreases with rise in temperature. Better performance at low CNSL concentration was registered under dynamic conditions and room …

Potential Use Of Waterguard As A Disinfectant For Domestic Water Use, Yohana L

Tanzania Journal of Engineering and Technology (TJET)

been identified as an alternative method for treatment of domestic drinking water. The aim of this study was to investigate the effectiveness of Water Guard in disinfecting drinking water from different sources drawn from Kinondoni district, Dar es Salaam as well as to establish appropriate dosage that can be used during the treatment. Results showed that, a dose of 4.0mL per 20 litrer of water guard is sufficient for disinfection of urban water sources. The above prescribed doses provide 100% disinfection efficiency with residue chlorine of less than 0.3mg/l. Water with turbidity values of 30-35 NTU, chlorine dosage of 8mL/20 …

Investigation Of The Effect Of Particle Size On Groundnut-Oil Solvent Extraction, S Manyele

Tanzania Journal of Engineering and Technology (TJET)

An investigation of the effect of particle size on the performance of vegetable oil recovery by solvent extraction is reported. Experiments were conducted using soxhlet extractor, groundnuts and n-hexane. Samples were grouped into mean particle sizes of 0.25, 0.75, 1.3, 3.3, and 7.5 mm using standard sieves. The effect of particle size was studied for extraction time intervals of 1, 2, 3, 4, 5 and 8 hours. The oil yield, oil recovered per kg solvent used, kg solvent lost per unit time, and the rate of extraction (kg oil recovered per hour) decreased with increasing particle size. Meanwhile, the percent …