Engineering Commons^™

A Quantitative Analysis Of Burrowing And Subterranean Locomotion In The Sand Lance Using A Transparent Sediment, Issei Fujita, Makoto Tomiyasu, Jun Yamamoto, Yasuzumi Fujimori

Journal of Marine Science and Technology–Taiwan

Sand lances (Ammodytes spp.) rely on rapid burrowing into sediment for predator avoidance. Although their sediment grain-size preferences are well documented, the biomechanics underlying burrowing success remain unclear because natural substrates are opaque. Using a transparent-sediment system, we directly visualized and quantified burrowing kinematics to: (1) test the effect of body size (total length, TL) on burrowing success; (2) examine entry mechanisms (e.g., swimming speed, entry angle); and (3) describe locomotion within sediment. Logistic regression on the full dataset (N = 28 fish) identified TL as the primary determinant of success, with larger individuals exhibiting significantly higher success …

Cruise Network Design Under Sequential Duopolistic Entry, Ta-Hui Yang, Ching-Hui Tang, Wan-Tien O

Journal of Marine Science and Technology–Taiwan

This study addresses the network design for international cruise services in a duopolistic market, where carriers enter and make decisions sequentially. The leader, who makes the first move, makes decisions as there is no competitor in the market. The follower, who makes decisions later, has to design their network considering the existing leader’s network. The leader’s model is a mixed integer linear problem while the follower’s model is a mixed integer nonlinear problem. Therefore, a heuristic is proposed to solve the problem. The commercially available general algebraic modeling system is used in conjunction with its different solvers to solve the …

Effect Of Heat Treatment On The Corrosion And Wear Behavior Of 17-4 Ph Stainless Steel For Marine Applications, Syuan Tai, I-Kon Lee, Ming-Yuan Lin, Kang-Yu Liao, Chin-Chun Chang, Hung-Bin Lee

Journal of Marine Science and Technology–Taiwan

This study explores the tribocorrosion behavior of conventionally cast 17-4 PH stainless steel under real seawater conditions, focusing on the effects of three heat treatments (Solution, H900, H1100). Electrochemical tests, tribocorrosion experiments, SEM, XPS, and quantitative analysis were used to establish a three-stage tribocorrosion mechanism. Results show that H900 exhibits superior corrosion and wear resistance, while H1100 suffers increased material loss and surface cracking at high potentials. Elemental analysis revealed NbC migration forming third-body particles, which, although briefly reducing friction, induced local stress concentration and crack initiation. The findings highlight the critical influence of microstructure, passive film stability, and third-body …

Enhancing Underwater Imagery And Organism Detection Using Reinforcement Learning, K. Arul Deepa, P. Ramya, Karpaga Vinodha, Dharmaraja C

Journal of Marine Science and Technology–Taiwan

Underwater environments pose significant challenges in assessing image quality and organism detection due to light scattering and absorption, which limits visibility and color fidelity. Existing solutions often fail to effectively address these challenges, resulting in suboptimal image quality and hindering organism identification. This paper examines the problem through a dual-focused approach: enhancing underwater images and detecting organisms using the Underwater Image Enhancement Benchmark (UIEB) dataset. The first step introduces a state-of-the-art method for image enhancement by applying reinforcement learning (RL) principles. By formulating the enhancement process as a Markov Decision Process (MDP)—where states are represented by image features and actions …

Design, Testing And Controls For Air Source Heat Pump System In Cold Climates Using Natural & Conventional Refrigerants, S M Abdur Rob

Dissertations and Theses

Fossil-fuel based heating systems used in the residential buildings in northeastern U.S region are not only inefficient but also largely responsible for the greenhouse gas emissions in U.S. Electrification of the buildings has been proved to be the most efficient way to reduce the greenhouse gas emissions where Heat Pumps can be the best alternative to replace the natural gas based heating system to accelerate the electrification process. Among different types of heat pumps, the Air Source Heat Pump (ASHP) system is widely used due to the easy installation and energy efficiency. Conventional heat pump technologies use various types of …

Efficiently Stowed Flashers With Uniform-Thickness Panels Based On Non-Developable Origami, Larry L. Howell, Robert J. Lang, Specer P. Magleby, Davis Wing

Faculty Publications

We present the mathematical construction of a deployable flasher pattern with near-uniform nonzero thickness in the deployed form and efficient face-to-face packing in the stowed form. We demonstrate its fabrication, deployment, and stowage. The results facilitate the design and manufacture of deployable systems with panels whose substantial thickness is dictated by the end application, with particular utility for space systems.

Experimental Thermal Characterization And Comparison Of Direct Liquid Cooling And Air Cooling For A High-Density Gpu Server Thermal Test Vehicle, Oluwagbolahan Esan

Mechanical and Aerospace Engineering Theses

As the power density of artificial intelligence (AI) and high-performance computing (HPC) servers escalates, air cooling is approaching fundamental scaling limits set by air's low convective heat transfer coefficient and rising parasitic fan power. This thesis presents an experimental comparison of direct-to-chip liquid cooling and air cooling for a high-density GPU server, using a Thermal Test Vehicle (TTV) that emulates the device layout and power-density regime of an 8-GPU SXM5-class baseboard (eight emulated GPU blocks and four NVLink Switch modules). The liquid configuration was tested at 8.8 kW (8.0 kW GPU, 800 W switch) across three Coolant Distribution Unit (CDU) …

A Real-Time Autonomous Mobile Robotic System For Crack Detection And 3d Laser Profiling In Construction Using Two-Stage Deep Learning, Emmanuella Ogun

College of Graduate Studies: Theses & Dissertations

This thesis presents an autonomous mobile robotic system that integrates real-time visual crack detection with laser-based three-dimensional profiling for building inspection. The system coordinates SLAM-based navigation, deep learning perception, and manipulator-guided measurement within a unified ROS 2 framework, enabling scan-on-demand workflows where laser profiling occurs selectively at visually detected defect locations. The detection pipeline employs a two-stage architecture combining U-Net semantic segmentation with Pix2Pix residual refinement, achieving 73.9% mean intersection-over-union and 76.4% F1-score on the CrackSeg9k benchmark while maintaining 16 frames-per-second real-time throughput. Real-world validation demonstrated 95% detection success on 80 campus images under challenging conditions. The profiling subsystem utilizes …

Computational Fluid Dynamics Simulation Of In-Situ Plasma- Assisted Cold Spray, Lucas Degen

Electronic Theses and Dissertations

Cold spray is a solid-state form of additive manufacturing with high versatility and widespread applicability, especially in relation to metal coatings. Many applications exist within the fields of aerospace, defense and energy systems to obtain sustainable, temperature and corrosion resistant, robust coatings. High-strength alloys and refractory metals generally encounter challenges with regards to cold spray coating adhesion and overall deposition efficiency. Heat induced methods of post-processing or in-situ treatment have been explored to encourage particle softening in the cold spray plume, as well as coating recrystallization to enhance material properties. These approaches have primarily been limited to an experimental approach, …

Computational Modeling Of Biophysical Transport: Respiratory Drug Delivery And Tissue-Level Physics, Md Tariqul Hossain

Electronic Theses and Dissertations

The nasopharynx, the upper part of the pharynx located at the back of the nose serves as a critical hotspot for initial respiratory infections via inhaled transmission, largely due to the presence of specific surface receptors that pathogens can exploit for cell invasion, combined with a relatively sparse local mucociliary substrate. To enhance the therapeutic efficacy against certain pathogens, such as the SARS and Influenza viruses, it is therefore essential to improve the targeted delivery of drugs to the nasopharynx. This study explores the use of intranasal sprays as a method for drug administration and models the transport of sprayed …

Numerical Investigation Of Injector Location And Equivalence Ratio In A Flame‐Holder Cavity Scramjet, Matthew Sorenson

Electronic Theses and Dissertations

This thesis presents a CFD-based parametric study of injector location and fuel rate in an ethylene-fueled flame-holder cavity scramjet using STAR-CCM+. Simulations are performed for three injector locations (x/D = 18, 36, and 54) and nine equivalence ratios spanning from ϕ = 0.2 to 1.0 in 0.1 increments. The study aims to determine how injector placement and fueling level alter scramjet performance across a broad operating sweep. The results show a clear regime change between ϕ = 0.2 and ϕ ≥ 0.3. At ϕ = 0.2, combustor behavior is weakly sensitive to injector location compared to the higher-fueling cases. For …

Stiffening Of Soft Silicone Upon Deep Uv Treatment As Characterized Using Nanoindentation, Amanda Wilder, Zaria Booth, Caden Obermeyer, Saika Sharmin, Venkat Maruthamuthu

Mechanical & Aerospace Engineering Faculty Publications

Silicones are elastomers that have a wide variety of uses, including biomedical applications such as the coating of biomedical devices and as implants. Soft silicones with mechanical properties similar to those of biological tissues have particularly gained use as substrates for cell culture in mechanobiology studies. In this context, it would be desirable to be able to alter their surface mechanical properties with a relatively simple physical treatment. While deep ultraviolet (deep UV) or ultraviolet C (UV-C) treatment has been previously used as a surface treatment method for stiffer silicones formulations, the effect of this treatment on soft silicones relevant …

Autonomous Coupler Alignment Using Position-Based Visual Servoing In A Ros~2 Framework, Nickolas Giffen

Graduate Research Theses & Dissertations

As robotic arms are becoming increasingly common alongside humans as collaborative robots, their high precision in motion enables tasks to be performed at significantly higher speeds with reduced disruption in the environment. The Fermi National Accelerator Laboratory is exploring this application by incorporating a UR16e from Universal Robots in a cleanroom setting during assembly of couplers to superconducting radio frequency cavities as part of the PIP-II project. The goal of the robotic assembly process is to precisely position the UR16e robot so that the coupler flange, mounted on the robot’s end-effector, is accurately aligned with and pressed against the cavity …

Gaussian Process Regression–Based Uncertainty Quantification For Unmanned Aircraft System Traffic Management And Advanced Air Mobility Applications, Aakarshan Khanal

Mechanical and Aerospace Engineering Dissertations

Uncertainty quantification has gained significant attention in recent years as a research area in dynamical systems. Mathematical representations of the physical system, combined with an understanding of model uncertainties, enable the propagation of uncertainty in temporal space, which allows us to make informed decisions. However, what if the true dynamics of the system is unknown or too complex to define explicitly? In such cases, the system’s behavior can instead be inferred or learned from observed input–output data rather than from an analytical or physics-based model. To this end, this dissertation focuses on developing a data-driven framework for nonparametric dynamics modeling, …

Influence Of Surface Features On Heat Transfer During Dropwise Condensation Over Superhydrophobic Surfaces In Shear Flow, Shaur Humayun, R. Daniel Maynes, Julie Crocket, Brian D. Iverson

Faculty Publications

This study investigates heat transfer during dropwise condensation (DWC) on superhydrophobic (SH) surfaces in humid air shear flow, emphasizing the effect of increased drop mobility and the influence of surface micro/nanostructure on heat transfer rates. Experiments were conducted on smooth hydrophobic, microstructured SH, nanostructured carbon-infiltrated carbon nanotube (CICNT) surfaces, and two-tiered SH surfaces with both micro and nanostructures. Heat transfer rates were measured under humid air flow rates in the range of 2–4 CFM. Experimental results demonstrate that surfaces with nanostructure (including two-tiered structures) exhibit increased drop mobility and coalescence-induced drop jumping, enhancing drop removal rates and overall heat transfer …

Mission-Focused Multidisciplinary Design Optimization Of Tilt-Rotor Evtol Propulsion System, Tyler Critchfield, Andrew Ning

Faculty Publications

Tilt-rotor propulsion system design requires a multidisciplinary approach to tackle important challenges and competing tradeoffs between disciplines. In this paper, we model rotor aerodynamics, blade structures, vehicle drag, electric propulsion, and tonal/broadband acoustics for a tilt-rotor, electric vertical takeoff and landing aircraft using low-to-mid fidelity tools. We use gradient-based design optimization with automatic differentiation and parameter sensitivity analyses to explore the design space and complex tradeoffs of tilt-rotor distributed electric propulsion systems, exploring effects of variations in payload/empty weight, battery specific energy, and blade tip speed. This framework models multiple operating points with a mission-focused objective to account for the …

Effect Of Kelvin Seamount On Acoustic Propagation, Lindsey Moss

Open Access Master's Theses

This thesis contains CUI. It cannot be distributed, exported, uploaded, or published until it has gone through the proper public release process.

Carbon Nanotube/ Thermoplastic Polyurethane (Cnt/Tpu)-Based Triboelectric Nanogenerator With Self-Charge Pumping For Implantable Knee Load Sensing And Energy Harvesting, Osama Abdalla, Maryam Hosseini, Milad Azami, Amir Ameli, Emre Salman, Milutin Stanacevic, Ryan Willing, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

Aseptic loosening and joint instability remain the primary modes of failure in total knee arthroplasty (TKA). To provide real-time biomechanical load monitoring, this study presents a triboelectric nanogenerator (TENG) utilizing a carbon nanotube/foamed thermoplastic polyurethane (CNT/TPU) composite dielectric layer paired with a Kapton tape between dual electrodes. By leveraging the triboelectric effect, the device functions simultaneously as an energy harvester and a self-powered load sensor. To overcome power density limitations, a self-charge pumping mechanism via a multi-stage voltage multiplier circuit (VMC) was integrated and evaluated under physiological cyclic loading (2100 N at 1 Hz). The system’s charge dynamics were further …

Two-Phase Transcritical Carbon Dioxide Flow At The Microscale For Thermal Management Applications, Soroush Niazi

Graduate Studies Theses and Dissertations 2026

High-power electronic and power-conversion devices now generate heat fluxes that exceed what conventional air- and single-phase-liquid cooling can dissipate, motivating the search for more capable coolants and cooling mechanisms. Carbon dioxide is an attractive candidate for this role: it is inexpensive, non-toxic, and environmentally friendly, and near its critical point its thermophysical properties change rapidly, which raises the heat-transfer coefficient. In addition, a large pressure drop produces strong cooling through the Joule–Thomson effect and phase change, so that the throttling element itself becomes a source of cooling. This dissertation studies the throttling, phase change, and choking of high-pressure carbon dioxide …

Advanced Ysz/Si(B)Cn And Bnnt/Si(B)Cn Ceramics Matrix Composites For Extreme Environments In Hydrogen Combustion, Yiting Wang

Graduate Studies Theses and Dissertations 2026

The growing demand for carbon-neutral energy conversion has accelerated the development of hydrogen-fueled gas turbine systems, which operate at significantly higher temperatures and more chemically aggressive environments than conventional natural gas turbines. To meet these stringent requirements, ceramic matrix composite (CMC) materials consisting of yttria-stabilized zirconia (YSZ) fiber reinforced Si(B)CN ceramic matrix were developed. To further enhance in-plane heat dissipation, thermal stability, thermal shock resistance, and thermal cycling performance, a Si(B)CN/Boron Nitride Nanotubes (BNNT) nanocomposite coating was incorporated onto the YSZ/Si(B)CN composites. Microstructural characterization confirmed the formation of a continuous Si(B)CN ceramic matrix reinforced with uniformly distributed BNNTs. The resulting …

Effect Of Inter Electrode Distance On Electrochemical Mineralization Of Calcium Carbonate In Mildly Acidic Environments, Irene Walker, Ivy Wu, Steven Decaluwe, Robert Bell, Kerry Rippy

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The effect of inter electrode distance (IED) on electrochemical mineralization in a parallel plate cell with a stainless-steel working electrode is presented. Three IEDs were tested, 6.5 mm, 15.5 mm, and 22.0 mm, for their water reduction effectiveness to create a region of local alkalinity that stimulates calcium carbonate precipitation in mildly acidic conditions. Chronoamperometry at -1.6 V for 30 minutes with ex-situ optical microscopy and scanning electron microscopy (SEM) were used. At the smallest IEDs, crystal clusters formed in growth-favored regimes as compared to the largest IED, where nucleation dominated, leading to encasement of the SS mesh. Rapid precipitation …

Performance Analysis Of Labyrinth And Hybrid Seals For Supercritical Co₂ Turbomachinery Applications, Ghanshyam Sarobar Mandal

Graduate Studies Theses and Dissertations 2026

Leaks account for large losses in turbomachinery systems, which has led to research on sealing technologies. The work presented studies the effect of a hybrid seal combining conventional labyrinth geometry and honeycomb structure by simulating supercritical carbon dioxide (sCO₂) flow through this geometry. The CFD solver compares effects such as changes in mass flow rate, formation of vortices, pressure profile, and seal performance as geometry angles of labyrinth teeth and honeycomb walls change at conditions normally found at higher pressures in these seals. Honeycomb walls were placed on the stator, ranging from 125°< θc< 55°. Labyrinth teeth were placed on the rotor at the same degrees. Honeycomb cell diameters were also varied, creating more resistance and turbulence within the flow. It was discovered that the honeycomb angle created stronger effects on vortices and boundary layer formation, while the labyrinth angle mainly affected the throttling of flow and loss generation. Combining all three angles created a relationship dictating the seal leakage. Dimensions of seals were based on gas turbine seals with changes to meet sCO₂ conditions. ANSYS was used to simulate static and rotating conditions until convergence on a specific geometry

Modeling Of Laser-Produced Plasma Plumes: Expansion, Chemistry, And Thin-Film Deposition, Edmund Tsiri Semaha, Edmund Tsiri Semaha

Theses and Dissertations

Abstract

Laser-assisted material processing involves coupled plasma expansion, chemical reactions, and particle transport that govern the quality of thin-film deposition. This dissertation presents a comprehensive computational investigation of these processes using the OpenFOAM framework. First, the performance of the twoPhaseEulerFoam (tPEF), rhoCentralFoam (rCF), and sonicFoam (sF) solvers is evaluated for modeling laser-produced plasma plume expansion under atmospheric conditions, demonstrating that tPEF accurately captures shock-wave propagation, hydrodynamic behavior, and multispecies interactions. Building on this validation, the reactingFoam (rF) solver is employed to investigate the chemistry of aluminum plasma expanding into an air environment (Al–N₂–O₂). The model incorporates appropriate thermodynamic, transport, and …

Machine Learning Modeling Of In-Situ Effective Thermal Conductivities And Ablation Behaviors Of Ceramic Matrix Composites Under Hydrogen Combustion Environments For Gas Turbine Engines, Jayanta Bhusan Deb

Graduate Studies Theses and Dissertations 2026

Through the integration of experimental characterization, machine learning, deep learning, numerical modeling, and physics-informed artificial intelligence, this dissertation explores the thermal performance of polymer-derived ceramic matrix composites (CMCs) for hydrogen combustion environments. The polymer infiltration and pyrolysis (PIP) process was used to create Yttria-stabilized zirconia (YSZ)-fiber-reinforced ceramic matrix composites, which were then experimentally assessed under hydrogen torch and hydrogen combustion conditions typical of next-generation gas turbine and aerospace propulsion systems. Front- and back-surface temperature measurements were used to continually monitor thermal reactions, and post-test microstructural characterization and numerical simulations were carried out to evaluate material integrity and heat-transfer behavior. To …

Experimental Demonstration Of A Laboratory Scale Packed Bed Reactor For Thermochemical Energy Storage Using Embedded Heating Elements, Zachary Monem

Graduate Studies Theses and Dissertations 2026

Thermochemical energy storage (TCES) is an emerging technology that is being studied as a carbon-neutral renewable alternative to conventional methods of large-scale power generation, such as the utilization of fossil fuels. TCES makes use of thermochemical materials to store and discharge energy in two-step reversible chemical reactions. Among the most promising TCES materials are metal oxides, which possess significantly higher energy storage densities compared to other TCES materials; consequently, thermochemical reactors are used to store and discharge large amounts of energy during reduction-oxidation cycles using metal oxide materials. The current work focuses on the design and experimental demonstration of a …

Cfd Analysis Of A Full Heat Exchanger Between Ammonia And Supercritical Co2 In Aviation Application, Mairah Ahmed

Graduate Studies Theses and Dissertations 2026

The aviation industry’s transition toward lower-carbon propulsion systems has accelerated interest in alternative fuels, including ammonia–hydrogen fuel blends. In this work, a supercritical CO2 Brayton cycle is integrated with the exhaust stream of a turbofan engine to recover waste heat and utilize it for ammonia preheating and cracking. The recovered thermal energy raises the ammonia temperature to the level required for catalytic decomposition, enabling onboard hydrogen production. The proposed architecture combines ammonia cracking with a high-bypass, two-shaft turbofan engine representative of the propulsion system employed on the Boeing 737 MAX 8. This approach addresses the challenges associated with onboard hydrogen …

The Effect Of Scanning Strategy And Build Conditions On The Residual Stress Of A Ded System With Realistic Clad Geometry, Christopher Matthew Roeder

Graduate Research Theses & Dissertations

Direct Energy Deposition (DED) is a leading metal additive manufacturing method for fabricating complex parts. However, the high thermal gradients during the process, along with their effects on thermal expansion and shrinkage during heating and cooling cycles, result in significant residual stress that imposes substantial limitations on the building process. These stresses can lead to warpage, cracking, and a reduction in overall mechanical performance, challenges that must be addressed in most manufacturing industries. While scanning patterns and clad geometry have often been studied independently, their interaction may provide deeper insights into the causes and effects of these operating conditions on …

Development And Characterization Of Flat And Flexible Rebco Cables For High-Field Accelerator Magnets, Emily Romancew

Graduate Research Theses & Dissertations

High-Temperature Superconducting (HTS) materials are at the forefront of innovation for fundamental particle physics. The next generation of particle accelerators aims to explore higher mass particles and is dependent on the ability to achieve higher fields in the 20–30 T range to keep machine size within a practical footprint. Current magnet technology relies on low-temperature superconductors (LTS) such as NbTi and Nb₃Sn, which are limited to fields of approximately 8–16 T, while high-temperature superconductors (HTS), particularly Rare-Earth Barium Copper Oxide (REBCO), offer a promising pathway toward higher-field magnets due to their ability to carry large currents at elevated magnetic fields. …

Lean Service System Optimization In U.S. Automotive Maintenance Centers: A Time Study And Simulation-Based Approach To Reducing Service Cycle Time And Increasing Efficiency, Rakibul Hasan Sarker

All Graduate Theses, Dissertations, and Other Capstone Projects

The primary objective of this study is to measure the current service time at a U.S. automobile service center, with the aim of reducing waste and optimizing service operations through time study and simulation modeling. Inefficiencies in those service centers increase service time and labor costs, reduce service quality, and reduce workshop productivity, thereby increasing customer waiting time. In this study, real-world shop floor data were collected from a single service center, namely Jiffy Lube. Over the course of ten working days, 205 vehicle data points were acquired. Service time, bay time, and overall process time were computed and examined …

Critical Parameters Controlling Oxide Scale Formation And Hydro-Descaling Efficiency During Steelmaking, Tochukwu Princewill Ojiako

Doctoral Dissertations

In modern steelmaking, cast slabs are exposed to high-temperature oxidizing environments during secondary cooling, reheating, and hot rolling, resulting in the formation of multilayer oxide scales on the steel surface. These scales interact with mold-flux residues originating from the casting process (CC). The morphology, chemistry, and adhesion of oxide scale strongly influence its removability during high-pressure hydraulic descaling and ultimately determine the surface quality of hot-rolled products. However, the mechanistic relationship between oxide scale evolution, scale-steel interfacial structure, and hydraulic descaling performance remains poorly understood.

This dissertation investigates oxide scale formation, modification, and removal in low-carbon thin-slab steels produced by …