Engineering Commons^™

Upconversion Photoluminescence In Wsse Alloy Monolayer Under Uniaxial Tensile Strain, Shrawan Roy, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The optical responses of monolayer transition metal dichalcogenides (1L-TMDs) can be tuned effectively by using mechanical strain. In this work, the tuning of upconversion photoluminescence (UPL) emission in 1L-WSSe alloy by applying uniaxial tensile strain is investigated. When the uniaxial tensile strain is changed from 0 % to 1.02 %, the peak position of UPL emission has a redshift of around 25.6 nm, and the UPL intensity goes up with an exponential function of the applied strain as the upconversion energy difference is varied from −197 meV to −131 meV. The sublinear power dependence for UPL emission in 1L-WSSe alloy …

Using A Record Player Inspired Probe System To Investigate Adhesion And Friction Of Tire Rubber At Micrometer Length Scales, Kyle J. Galigher, Brendan Schmitt

Williams Honors College, Honors Research Projects

We will be using the principles behind how a record player turns physical grooves into electrical signals to develop a device that can be used to measure the surface of tires. The device will be capable of measuring the surface roughness of rubber samples from both new and worn tires, in order to compare the differences between them. It will be operable at varying speeds, and will produce electrical signals that correspond to the bumps along the surface of the rubber. The design will be carried out and optimized with the use of SolidWorks modeling, finite element analysis, motion analysis, …

Hvac Design And Calculations, Sarah Walters, Sarah Beyea

Williams Honors College, Honors Research Projects

This project studies Heating, Ventilation, and Air Conditioning (HVAC) systems for a car dealership located in Seguin, Texas. The building construction and architectural drawings were provided by EPIC Engineering Group. Comprehensive load calculations were done on the building in order to calculate necessary airflows throughout the building. Three possible HVAC design solutions were compared: Rooftop Units (RTUs), rooftop units paired with Variable Air Volume (VAV) Terminals with electric reheat, and Variable Refrigerant Flow (VRF) paired with a Dedicated Outdoor Air Unit (DOAS). Energy modeling was completed to compare the utility costs and energy consumption of each system. A comprehensive weighted …

Ai-Based Porosity Detection In Babbitt Bore Turning, Kaylee Leggett, Hannah Adams Gemmell, Kaisa Shingleton

Williams Honors College, Honors Research Projects

For this project, an external company reached out to the University of Akron requesting assistance with defect detection during their vertical turning operations. As babbitt is removed in a vertical turning process, it occasionally reveals defects, mainly porosity, which can lead to costly downstream failures of the part. Current inspection techniques involve use of dye penetrant, which is time consuming, labor intensive, unergonomic, and a source of human error. The goal of the project is to create an alternative inspection method using an AI-based machine-learning model. After the turning operation, a camera is deployed to perform an in-place inspection, taking …

Design New Stage For Vacuum Pin On Disk, Miranda Boyd

Williams Honors College, Honors Research Projects

For my senior design project, I am redesigning the moving stage for the vacuum pin-on-disk test used in the Akron Engineering Tribology Lab. This system is used to evaluate bearings and lubricants for aerospace applications under controlled vacuum conditions. The current stage design limits flexibility when adjusting for different testing parameters, so my goal is to develop a new movable stage that allows for varying weights and loads to be applied accurately and safely. The redesigned stage will improve test efficiency, adaptability, and precision, ensuring the system can accommodate a wider range of experimental conditions and materials while maintaining compatibility …

Lumacurve Control System Update, Jacob Kustra, Caleb Wengerd

Williams Honors College, Honors Research Projects

The existing track heater control system used by Lumacurve has become outdated and requires frequent maintenance due to inconsistent operation and component failures. This project aims to modernize the system through the implementation of a programmable logic controller (PLC), infrared non-contact temperature sensing, and an automated pneumatic ejection mechanism.

The redesigned system improves temperature monitoring accuracy and reduces operator intervention by automatically ejecting heated plastic tracks from the heater once the desired temperature is reached. An emergency ejection subsystem is also incorporated to safely clear tracks from the heater in the event of improper operation or system faults. Additional emphasis …

Length Modulatin Hip Implant, Ethan Smith

Williams Honors College, Honors Research Projects

Leg length discrepancy is a well-documented complication of total hip arthroplasty, commonly known as hip replacement surgery. Even small differences in leg length can lead to an altered gait, increased joint stress, and long-term postural issues that may affect a patient’s overall mobility and comfort. The current method for correcting this discrepancy often involves a follow-up surgical procedure, which extends recovery time and increases the physical and financial burden on the patient. To address these shortcomings, we developed a concept for an adjustable hip implant that can be lengthened noninvasively after surgery. The design incorporates an internally housed battery and …

Breaking The Vapor Barrier And Scale: Revolutionizing Steel Quenching With Ultrasound Technology, Anthony O. Santos

Williams Honors College, Honors Research Projects

The quenching process is a fundamental heat treatment used to enhance material properties by heating steel to its austenitizing temperature and rapidly cooling it to form high-strength martensite. However, this process is often hindered by two surface barriers: the Leidenfrost effect (vapor blanket) and oxide scale. These cooling limitations restrict the use of steel in high-performance aerospace applications due to inconsistent material properties and unpredictable engineering properties. This research investigates the use of fully submersible, 50-watt 40 kHz ultrasound technology to improve cooling rates in a Jominy test [4]. Through numerical simulations and experimental validation, the study demonstrates that acoustic …

Optimized Returning Floating System (Orfs/Orfeus), Jordan A. Mcclelland, Adam J. Belluardo

Williams Honors College, Honors Research Projects

We are developing a proof-of-concept modified guitar tremolo system for an electric guitar that can automatically optimize tuning adjustments when a player transitions between tuning schemes using a cam system. Currently, changing tunings takes about 10–15 minutes because adjusting the tension on one string affects the tension of the others. Our design aims to compensate for these interactions and significantly reduce the time required to switch tunings.

Large Telescope Mount For Long Exposure Photos, Payne M. Landis, Anna J. Gray

Williams Honors College, Honors Research Projects

When viewing the stars through a telescope, it is common that the object you are viewing drifts out of view. Many amateur astronomers seek to capture long exposure images of the stars, planets, and galaxies with commercially available sky tracking telescope mounts. The complication is that these telescope mounts are both incredibly expensive and have low weight limits. These issues limit accessibility to these products based on the telescope. For each person, telescope parameters determine the amount of light and magnification that can be viewed, which then determines exposures time for adequate photo results. The options on the market for …

Optimization Of Post-Processing Methods For Additively Manufactured Metals, Julia R. Carano

Williams Honors College, Honors Research Projects

Ultrasonic Nanocrystal Surface Modification (UNSM) is a process used to change the surface hardness of flat-faced materials. It is a machining process using a high-powered laser and a blunt-tipped tool at high speeds which aims to improve the uniformity of the surface on most metals. By heating and pressing the surface of the workpiece, the grains of the material become less rounded and more cohesive on a microscopic level. This, ideally, results in a workpiece with improved material properties. The changes were previously observed through hardness testing.

Thermal Radiation Effects On Particles From Plasma Arc Radiation, Reece Davis, Joseph Mcgee

Williams Honors College, Honors Research Projects

Understanding the radiation heating and transport of both microparticles and nanoparticles is a phenomenon that is critical for both space and Earth sciences. In space, these particles are heated by plasma arcs within ionized space clouds or solar flares and can be present the path of deep space missions and orbital satellites. While on Earth, processes such as forest fires, nuclear fusion, and microchip manufacturing include the plasma arc heating of particles. These particles lay within the Mie Scattering Regime and Rayleigh Scattering Regime and emit radiation differently based on their diameter. New mathematical and computational modeling has been conducted …

Akron Soap Box Derby Super Kids Car, Alexis Schultz, Cooper Sites, Sean Stevenson

Williams Honors College, Honors Research Projects

This project aims to redesign the All-American Soap Box Derby Super Kids vehicle to enhance safety, accessibility, and performance while maintaining full compliance with official regulations. The Super Kids program enables children with physical and cognitive disabilities to race alongside a co-pilot, but the current vehicle design presents challenges in stability, entry/exit accessibility, and control—especially following recent regulation changes that increased vehicle speed. The redesigned car will focus on improved ergonomics, lightweight construction, and structural integrity within a $1,000 budget and a 165 lb weight limit.

An iterative engineering design process will guide the project through research, CAD modeling, FEA …

Kruss Modifications, Anderson W. Howard

Williams Honors College, Honors Research Projects

My project focuses on modifying a test device in the AETL to allow for high temperature test to be performed. I am also adding modifications to make it safer to perform tests using the high-pressure system.

The Development And Implementation Of A Computational Framework To Simulate Patellofemoral Joint Mechanics, Mahmood Rashedi

Master’s Theses

Anterior knee pain affects approximately 25% of adults and is associated with altered joint mechanics. Patellofemoral joint (PFJ) models vary widely in complexity, with no established gold standard. Musculoskeletal models efficiently estimate joint loading but do not capture tissue-level mechanics, whereas finite element (FE) models provide tissue-level predictions at greater computational cost. This thesis developed a workflow to evaluate relationships between musculoskeletal model-predicted PFJ loads and FE-predicted cartilage mechanics, examined the impact of altered quadriceps activation, and introduced improved computational models.

Marker trajectories and ground reaction forces were collected from four adults (2 male, 2 female) during walking and squatting. …

The Effect Of Chamber Geometry On The Performance Of Oscillating Water Column, Timilehin O. Osunade

College of Graduate Studies: Theses & Dissertations

This thesis investigates the effect of internal chamber geometry on the performance of a piezoelectric oscillating water column (OWC) wave energy harvester. Four acrylic chamber configurations with internal top-surface angles of 0°, 30°, 45°, and 60° were tested under 32 controlled conditions combining synchronous (SYN) and asynchronous (ASC) forcing at input voltages of 4, 6, 8, and 10 V. A 35 mm piezoelectric disc mounted at the chamber roof served as the power take-off element and, subject to the RC-limit caveat disclosed in Section 3.2.1, as a first-order dynamic analogue of the chamber pressure for phase-based compressibility analysis. All test …

Automated Soil Resetting System For Extraterrestrial Regolith Simulation, Parker W. Brennan, Anthony C. Daniels

Williams Honors College, Honors Research Projects

This project focuses on designing an automated soil resetting system for extraterrestrial regolith simulation. The system will prepare a regolith simulant testbed to a desired, repeatable density, enabling reliable wheel–terrain testing for planetary rover research. Manual soil preparation currently exposes testers to hazardous particulates and produces inconsistent results.

The proposed system will integrate mechanical and control elements to reset the soil bed safely and efficiently. A combination of raking and vibrational methods will be explored, with feedback sensors and automation to achieve target density control. The research will proceed through literature review, benchtop experimentation, prototype design, and full-scale testing over …

Adjustable Car-Camping Bed Frame, Zachary Lamonica, Mitchell Mcgrath

Williams Honors College, Honors Research Projects

This project explores an innovative camping solution designed to enhance mobility, comfort, and accessibility for outdoor enthusiasts. The first is the Adjustable Car-Camping Bed Frame, engineered to be lightweight, collapsible, and adjustable to various vehicle interiors. It prioritizes ease of setup, compact storage, reliability, and affordability, enabling convenient travel without sacrificing comfort. The design aims to simplify camping while maintaining durability. As an aerospace systems engineering student, I will apply systems engineering to the Bed Frame, using aerospace software and principles. The scope includes research, design, prototyping, and testing, with a focus on real-world usability and environmental adaptability. Additionally, my …

Unmanned Aircraft Vehicle Safety Reporting And Analysis Of Incidents Utilizing Machine Learning, Cody Harrison

2026 Research Poster Competition

Unmanned Aerial Vehicles (UAVs) are rapidly evolving and being integrated into a wide range of applications, from commercial deliveries to police surveillance and recreational use. As UAVs become more prevalent, the complexity of operations and potential for incidents or accidents will continue to increase. Understanding why these incidents and accidents occur is critical to ensure safe and reliable drone operations as the industry continues to grow. To combat these issues, it is invaluable to analyze UAV incidents quantifiably to identify leading causes and risks in a streamlined and efficient matter. Current manual reporting systems often struggle with the sheer volume …

How Do Different Flight Training Programs Impact Pilot Proficiency?, Abigail Henson

2026 Research Poster Competition

The Federal Aviation Administration (FAA), founded in 1958, ensures safe and efficient use of national airspace by regulating aircraft and pilot certification, setting standards for airports, and managing the National Airspace System. One such regulation is in the certification process for aspiring student pilots. Students who want to obtain their private pilots license can do so by picking either a Part 61 or Part 141 flight school. While both lead to the same certification, these two options differ significantly in terms of structure; Part 61 programs offer flexibility with their individualized approach and fewer requirements while Part 141 schools follow …

Analysis Of Loss Of Engine Power Events In General Aviation, Saloni Satappagol

2026 Research Poster Competition

Among different parts of aviation, general aviation (GA) stands out as one of its largest and most vital sectors. GA is defined as any civil aviation activity excluding scheduled commercial flights and military operations. While loss of engine power is a serious subset of general aviation accidents, accounting for more than 200 fatal accidents per year, several gaps remain in our current understanding of these accidents. While current literature includes older studies from 2000-2014, new data from the past decade have not been analyzed for trends yet. With this significant gap of more than a decade in understanding, it is …

Fused Filament Fabrication Additive Manufacturing Of 17-4 Ph Stainless Steel: Process–Structure–Property Relationships In Magnetic Materials, Maanav Patel

Theses and Dissertations

Additive manufacturing (AM) enables the fabrication of complex metallic components through layer-by-layer processing directly from digital models. Among AM techniques, material extrusion–based processes such as fused filament fabrication (FFF) provide an accessible method for producing metal parts using filament feedstocks composed of metal powders and polymer binders. When applied to precipitation-hardening stainless steels such as 17-4 PH, the processing route and heat treatments can influence the resulting microstructure and functional properties. This work investigates the magnetic behavior of 17-4 PH stainless steel fabricated using FFF and evaluates how heat treatment conditions influence measured magnetic properties. Samples were produced and analyzed …

Minimizing Snow Loss On Fixed Tilt Solar Pv Installations Through Frame Material Selection And Installation Layout, David B. Wallis

Dissertations, Master's Theses and Master's Reports

This thesis investigates the effects of frame material selection, module orientation and module gaps on photovoltaic energy production in a snowy environment. These factors are easily implemented in new PV installations at minimal or no extra cost. These experiments are installed as fixed tilt arrays at 35° with DC current, DC voltage, and meteorological monitoring. The frame material and module gap experiments both produced actionable results. In the frame material experiment, consistent event level energy production gains resulted in seasonal production gains favoring aluminum framed modules. In the module gap experiment energy gains are independent of atmospheric conditions. The orientation …

Modeling And Testing Chain Trencher Excavator And Cone Penetrometer Robotic Prospecting Systems For Lunar In-Situ Resource Utilization, Marcello C. Guadagno

Dissertations, Master's Theses and Master's Reports

The Artemis Missions aim to establish a sustained human presence on the Moon, requiring In-Situ Resource Utilization (ISRU) of water-ice deposits in permanently shadowed regions. Two critical capabilities must be developed to enable ISRU at scale: prospecting instruments that can characterize the spatial distribution and geotechnical properties of icy regolith in situ, and excavation systems that can extract hardened icy regolith efficiently. This dissertation addresses both needs through the development and testing of a Percussive Heated Cone Penetrometer (PHCP) for geotechnical prospecting and a chain trencher excavator for icy regolith mining.

The PHCP was developed across eight design iterations and …

Effects Of Hydrogen Enrichment And Premixing On Flame Stability In A High-Pressure Axial-Stage Combustor, Alexandre Fernandes C. Santiago Filho

Honors Undergraduate Theses

The addition of hydrogen to conventional fuels enhances reactivity and can increase the risk of flashback in premixed gas turbine combustors. This study investigates the effects of premixing length and hydrogen concentration on flame stability in a high-pressure axial-stage combustor. Experiments were conducted at the UCF Propulsion and Energy Research Laboratory using a two-stage configuration, where the primary stage provided a high-temperature vitiated crossflow using a hydrogen-piloted, premixed methane–air mixture, and hydrogen-enriched methane–air mixtures were injected through a concentric fuel-tube injector in the axial stage. Premixing length was varied for pure hydrogen flames, and hydrogen concentration was varied at a …

Evaluation Of The Long-Term Sealability Performance Of Aramid Fiber Nitrile-Based Gaskets, Salome Ramirez

Honors Undergraduate Theses

The reliability of sealed, oil-filled containers is critical for maintaining the operation of high-voltage energy systems, in which the sensitive electronics need to be isolated from the cyclic conditions associated with outdoor environments. New materials bring the possibility of extending service lifetimes and maintenance intervals. Aramid fiber nitrile-based gaskets are an attractive alternative to conventional gasket choices due to their long-term stability in various environments and compatibility with porcelain, metals, and plastics. For newly designed porcelain-to-metal fittings, understanding the behavior of the candidate gasket material under realistic loading conditions is essential to ensure long-term seal integrity and equipment safety. Traditional …

Investigation Of The Impact Of The Shape Of The Wings On Formula E Racing Car Performance: Enhancements For Optimal Aerodynamics, Ednie Marthe Adlaikah Jozil

Honors Undergraduate Theses

The aerodynamic performance of a Formula E chassis significantly dictates its overall race efficiency, directly impacting crucial parameters such as battery range and thermal management. This thesis investigates the external aerodynamics of the baseline Gen 2 Formula E car and evaluates the performance gains of two novel aerodynamic packages: a "Fully Modified" configuration and a "Flat Rear Wing" design. Computational Fluid Dynamics (CFD) simulations were conducted to analyze drag coefficients (Cd), downforce generation, and vehicle wake structures at race-relevant free-stream velocities (e.g., 37 m/s and 89 m/s). To ensure numerical robustness, the computational setup was validated using a smooth sphere …

A Study Of Lost Pla Investment Casting For A356 Aluminum In Resource Constrained Manufacturing Environments, Maverick Beckmann

Electronic Theses and Dissertations

Lost PLA investment casting offers a low tooling route for producing complex aluminum parts, but repeatability depends on material use, burnout behavior, geometric process limits, and dimensional response. This thesis evaluated Lost PLA casting as a resource efficient manufacturing method for complex A356 aluminum components in resource constrained settings through four linked objectives: metal reusability, burnout and PLA selection, process limitations, and feature based dimensional shrinkage. A metal mass balance was performed on six casting trials using salvaged A356. Ash residual behavior was studied through a single tray screening test of eight commercial filaments and three invested mold burnout trials …

Robotizing Complex Welding Processes Through Imitation Learning And Generative Models From Human Demonstration, Yue Cao

Theses and Dissertations--Electrical and Computer Engineering

Arc welding processes demand real-time adaptive control that current robotic systems cannot achieve autonomously. This dissertation develops a systematic framework to robotize complex welding by learning from human demonstration, integrating generative modeling, physics-informed reconstruction, and model-based imitation learning. First, human--robot collaboration systems are established for both Gas Tungsten Arc Welding (GTAW) and Double-Electrode Gas Metal Arc Welding, combining robotic teleoperation with virtual reality interfaces to capture high-quality operator demonstrations. Second, a physics-informed neural network framework reconstructs complete molten pool flow fields from high-speed imaging, enriching process understanding beyond direct sensor observation. Third, generative models, including a hybrid latent variational autoencoder …

Analytical Study Of Transient Mixed Convective Radiative Jeffrey Fluid Flow With Diffusion–Thermo And Chemical Reaction, V. Sathiya, R. Vijayaragavan, B. Rushi Kumar

Mansoura Engineering Journal

This research examines the behavior of unsteady mixed convective radiative Jeffrey fluid flow over a permeable moving plate with a diffusion thermo effect. The study incorporates multiple factors, including aligned magnetic fields, heat generation, radiation, and chemical reactions. The behavior of Jeffrey fluid under these combined conditions is particularly relevant to the design of efficient heat exchangers, MHD generators, and cooling systems for electronic components. A regular perturbation technique was employed to solve the governing equations, yielding distributions for velocity, temperature, and species concentration. These solutions enabled the derivation of expressions for skin friction, Nusselt number, and Sherwood number. Through …