Engineering Commons^™

Numerical Study Of The Time-Periodic Electroosmotic Flow Of Viscoelastic Fluid Through A Short Constriction Microchannel, Jianyu Ji, Shizhi Qian, Armani Marie Parker, Xiaoyu Zhang

Mechanical & Aerospace Engineering Faculty Publications

Electroosmotic flow (EOF) is of utmost significance due to its numerous practical uses in controlling flow at micro/nanoscales. In the present study, the time-periodic EOF of a viscoelastic fluid is statistically analyzed using a short 10:1 constriction microfluidic channel joining two reservoirs on either side. The flow is modeled using the Oldroyd-B (OB) model and the Poisson-Boltzmann model. The EOF of a highly concentrated polyacrylamide (PAA) aqueous solution is investigated under the combined effects of an alternating current (AC) electric field and a direct current (DC) electric field. Power-law degradation is visible in the energy spectra of the velocity fluctuations …

Thermotrophy Exploratory Study, James Weifu Lee

Chemistry & Biochemistry Faculty Publications

The question of whether environmental heat energy could be utilized as a source of energy for biological metabolism is the center of this exploratory research. In 1979, this author postulated a hypothesis for the existence of thermotrophs that could isothermally utilize environmental heat energy as a source of their energy on Earth. According to this hypothesis, the thermotrophs could be the first primitive forms of life in the early Earth environment. The chemotrophs and phototrophs that we currently are all well familiar with might have been evolved somehow from the primitive thermotrophs. Furthermore, all the organisms currently regarded as the …

Jet Noise Reduction: A Fresh Start, Christopher K. Tam, Fang Q. Hu

Mathematics & Statistics Faculty Publications

Attempts to reduce jet noise began some 70 years ago. In the literature, there have been many publications written on this topic. By now, it is common knowledge that jet noise consists of a number of components. They possess different spectral and radiation characteristics and are generated by different mechanisms. It appears then that one may aim at the suppression of the noise of a single component instead of trying to reduce jet noise overall. The objective of the present project is to reduce large turbulence structures noise. It is the most dominant noise component radiating in the downstream direction. …

Design And Validation Of A Variable, Speed-Dependent Resistance Training Method For Muscle Hypertrophy, Alvaro Andres Aracena Alvial

Honors Undergraduate Theses

Muscle disorders and induced muscle atrophy impose critical risks to the well-being of an individual, limiting normal activities of daily living. Several resistance training methods have effectively reversed the progression of muscle atrophy. Weightlifting and hydrotherapy are the two widely practiced schemes for resistance training; however, there is the potential risk of excessive loads exerted on the muscles during weightlifting, and limited accessibility and cost are barriers to hydrotherapy. An alternative is using a resistance band. Some limitations include engaging multiple muscles/joints while only unidirectional resistance is feasible. To address these limitations, a VAriable Resistance Suit (VARS) was designed to …

Audible And Subaudible Components Of The First And Second Heart Sounds Using Phonocardiography And Seismocardiography, Daniella King

Honors Undergraduate Theses

Cardiovascular disease continues to be a leading cause of death in the United States, and a source of financial strain on the healthcare system. This prompts the need for new methods of low-cost, noninvasive technologies for cardiac monitoring to improve patient health and reduce healthcare costs. While the first and second heart sounds are common references that are listened to during auscultation of heart, seismocardiography (SCG) is a technology that detects chest sound vibrations with an accelerometer and may offer more information beyond the audible heart sounds. There is currently limited information regarding both the relationship between audible heart sounds …

Granular Jamming: Stiffness Vs Pressure And Organ Palpation Devices, Christopher H. Quach

Honors Undergraduate Theses

The intent of this thesis it to find a correlation between the stiffness of granular jammed particles and the pressure of the vacuum initiating the jamming force. Currently, granular jamming is being used to create palpation simulators for physicians to practice feeling the variety of stiffnesses of organs when healthy or ill. Because granular jamming allows for variable stiffness of any shape, it is an apt phenomenon to simulate the change of rigidity organs like the liver undergoes when diseased. For physicians to correctly identify how stiff the organ must be when using these palpation simulators, there needs to be …

Data-Driven Dynamic Motion Planning For Practical Fes-Controlled Reaching Motions In Spinal Cord Injury, Derek N.N. Wolf, Antonie J. Van Den Bogert, Eric M. Schearer

Mechanical Engineering Faculty Publications

Functional electrical stimulation (FES) is a promising technology for restoring reaching motions to individuals with upper-limb paralysis caused by a spinal cord injury (SCI). However, the limited muscle capabilities of an individual with SCI have made achieving FES-driven reaching difficult. We developed a novel trajectory optimization method that used experimentally measured muscle capability data to find feasible reaching trajectories. In a simulation based on a real-life individual with SCI, we compared our method to attempting to follow naive direct-to-target paths. We tested our trajectory planner with three control structures that are commonly used in applied FES: feedback, feedforward-feedback, and model …

Attrition Study Of Copper-Supplemented Iron-Based Oxygen Carrier For Chemical Looping Combustion, Neng Huang

Theses and Dissertations--Mechanical and Aerospace Engineering

Chemical looping combustion (CLC) is a promising technology that can mitigate the carbon emissions for power generation. The cost of oxygen carriers (OCs) impedes the scale up of CLC. Compared to synthetic iron-based OCs, red mud (RM), an abundant iron-based solid waste from industry, is a cost-effective choice due to its intrinsic inclusion of both inert and catalytic phases that are crucial for CLC. It was anticipated that the addition of copper oxide to RM using a mechanical mixing method that can be easily scaled up would enhance both reactivity and oxygen transport capacity (OTC), and the heat of reaction …

Utilization Of Uncrewed Aircraft Systems Towards Investigating The Structure Of The Atmospheric Surface Layer, Loiy Al-Ghussain

Theses and Dissertations--Mechanical and Aerospace Engineering

This study presents two approaches to investigate the surface-layer structure during the morning transition using uncrewed aircraft systems. The first approach employs three uncrewed aircraft systems- each equipped with a single multi-hole probe- simultaneously measuring horizontal transects were partnered with a fourth measuring vertical profiles during two consecutive mornings as part of the 2017 Collaboration Leading Operational Unmanned Aerial System Development for Meteorology and Atmospheric Physics (CLOUDMAP) measurement campaign near Stillwater, Oklahoma, U.S.A. Data were analyzed to extract time-dependent single-point statistics of kinematic and thermodynamic variables from the uncrewed aircraft systems. In addition, an approach is presented by which multi-point …

Mechanical Energy Harvester For Powering Rfid Systems Components: Modeling, Analysis, Optimization And Design, Alireza Babaei

Theses and Dissertations--Mechanical and Aerospace Engineering

Finding alternative power sources has been an important topic of study worldwide. It is vital to find substitutes for finite fossil fuels. Such substitutes may be termed renewable energy sources and infinite supplies. Such limitless sources are derived from ambient energy like wind energy, solar energy, sea waves energy; on the other hand, smart cities megaprojects have been receiving enormous amounts of funding to transition our lives into smart lives. Smart cities heavily rely on smart devices and electronics, which utilize small amounts of energy to run. Using batteries as the power source for such smart devices imposes environmental and …

Multiscale Modeling Of Cardiac Growth And Baroreflex Control, Hossein Sharifi

Theses and Dissertations--Mechanical and Aerospace Engineering

The heart functions within a complex system that adapts its function to any alteration in loading via several mechanisms. For example, the baroreflex is a short-term feedback loop that modulates the heart's function on a beat-to-beat basis to control arterial pressure. On the other hand, cardiac growth is a long-term adaptive response that occurs over weeks or months in response to changes in left ventricular loading. Understanding the mechanisms that drive ventricular growth and biological remodeling is critical to improving patient care. Multiscale models of the cardiovascular system have emerged as effective tools for investigating G&R, offering the ability to …

Anisotropic Material Behavior Of 3d Printed Fiber Composites, Jordan Garcia

Theses and Dissertations--Mechanical and Aerospace Engineering

Literature has shown that 3D printed composites may have highly anisotropic mechanical properties due to variation in microstructure as a result of filament deposition process. Laminate composite theory, which is already used for composite products, has been proposed as an effective method for quantifying these mechanical characteristics. Starting with the analysis of comparing the printing orientation of premanufactured carbon fiber reinforced filament, the mechanical properties of 3D printed objects were examined. The mechanical properties changed not only as a result of machine choice, but how the sample is oriented along the printing bed. The analysis continued with looking at the …

Machine Learning For Advancing Automation And Quality Control In Robotic Welding, Joseph Kershaw

Theses and Dissertations--Mechanical and Aerospace Engineering

Welding is a vital manufacturing process across a diverse range of industries to permanently join metallic components into needed assemblies. Though widely used and studied, the process is not fully understood due to the myriad of interconnected physics that present themselves during the welding process. Electrical, thermal, structural, and fluidic mechanics are simultaneously at work influencing one another to achieve the bonding that manufacturers desire. In addition to general manufacturing issues, such as tool wear or misalignment, micro-level changes to the material structure and composition can have cascading impacts on the final weld. This complexity makes it difficult, if not …

A Computational Fluid Dynamic Analysis Of Oxyacetylene Combustion Flow For Use In Material Response Boundary Conditions, Craig Meade

Theses and Dissertations--Mechanical and Aerospace Engineering

Oxyacetylene torches are used in the aerospace industry and research to test thermal protection system materials (TPS) due to their high flame temperatures and high heat flux capabilities. The purpose of this work is to determine a combustion model to accurately simulate the high temperature flow of an oxyacetylene torch. The flow conditions around a sample material can then be used as boundary conditions when modeling TPS material response. Two separate combustion models with equilibrium chemistry were investigated using ANSYS Fluent™; the Eddy-Dissipation Model, and the Partially Premixed model.The results of this study are compared to existing experiments for validation.

Generalizable And Adaptable Data-Driven Methods For Overcoming Barriers To Practical Industrial Condition Monitoring, Matthew B. Russell

Theses and Dissertations--Electrical and Computer Engineering

The future of smart manufacturing relies on predictive maintenance systems that intelligently minimize expensive downtime through timely assessment of machine condition. Deep Learning (DL) has achieved excellent performance in industrial condition monitoring experiments, but the constraints of the manufacturing environment prevent many algorithms from being practically deployed on the factory floor. Ubiquitous sensing from online machines generates high velocity data streams that require new techniques for efficient transmission and storage. Despite these ever-increasing data lakes, many applications still lack the data needed for training DL fault diagnosis and wear tracking models since most data is unlabeled and only from nominal …

Impact Of Spallation And Internal Radiation On Fibrous Ablative Materials, Raghava Sai Chaitanya Davuluri

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles are equipped with Thermal Protection Systems (TPS) that encounter high heat rates and protect the payload while entering a planetary atmosphere. For most missions that interest NASA, ablative materials are used as TPS. These materials undergo several mass and energy transfer mechanisms to absorb intense heat. The size and construction of the TPS are based on the composition of the planetary atmosphere and the impact of various ablative mechanisms on the flow field and the material. Therefore, it is essential to quantify the rates of different ablative phenomena to model TPS accurately. In this work, the impact of …

Optimizing Biomechanical Models: Estimation Of Muscle Tendon Parameters And Ankle Foot Orthosis Stiffness, Sepehr Ramezani

Electronic Theses and Dissertations, 2020-2023

The complexity of the human musculoskeletal system presents challenges in accurately identifying its characteristics, particularly due to the presence of redundant actuators on a single joint. Non-invasive measures are necessary to overcome these challenges. Optimization algorithms have emerged as a crucial tool to advance subject-specific musculoskeletal modeling allows a more realistic representation of biomechanical behaviors, enhancing our understanding of human movement and enabling better clinical decision-making. Furthermore, optimization algorithms play a vital role in customizing rehabilitation and assistive devices, such as orthoses and prostheses. The current ankle-foot orthosis (AFO) stiffness measurement methods require bulky, complex designs, and often permanent modification …

Development Of A Permanent Magnet Spherical Motor With 3 Degrees Of Freedom, Eric T. Hanson

All Graduate Theses, Dissertations, and Other Capstone Projects

This research is motivated by the need for actuators capable of delivering precise multiple degrees of freedom (DOF) motion with structure and energy efficiency in numerous applications. Permanent magnet spherical motors (PMSMs) are typical examples that can provide continuous and precise 3 dimensional (3D) rotational motion about a ball joint. The result of this research demonstrates a unique PMSM capable of 3D rotational motion control with high accuracy and bandwidth.

A Kalman filter (KF) sensor fusion method is developed to implement full state estimation of 3-DOF angular displacement and velocity in real time for a PMSM by simultaneously measuring the …

Reducing The Variability And Cost Of Determining The Coefficient Of Friction Of Various Lubricants, James M. Wirth

Honors Theses and Capstones

The Navy requires accurate fastener preloading for many of its fastened applications to protect the safety of the vessel and its personnel, and to ensure proper operation of various components. The preload is based on many properties including fastener materials, fastener geometries, and the coefficient of friction (COF) between mating surfaces. The COF is a critical value in determining the torque-load relationship of a fastener, and is dependent on the contact surface area and the materials in contact, the condition and finish of the contact surfaces, and any lubricant applied in these contact areas. Due to the large amount of …

Assessing The Economic Feasibility Of Capturing And Utilizing Carbon Dioxide From Ethanol Production In South Dakota, Makiah Stukel

Electronic Theses and Dissertations

Since the Industrial Revolution, anthropogenic greenhouse gas (GHG) emissions have spiked dramatically, prompting discussions on climate change. Mitigating climate change requires significant reductions in global carbon dioxide (CO2) emissions as CO2 is the most abundant anthropogenic GHG. A process that assists in offsetting the exponential growth in CO2 emissions is carbon capture and storage (CCS). Integrating carbon capture technology into the ethanol industry can provide an economically feasible way to achieve net reductions in CO2 emissions. The proposed work investigates the economic viability of applying CCS technologies to the 16 ethanol facilities in South Dakota (SD) and quantifies the potential …

On The Simulation Of Supersonic Flame Holder Cavities With Openfoam, Zachary Chapman

Electronic Theses and Dissertations

One of the next major advancements in the aerospace industry will be hypersonic flight. However, to achieve hypersonic flight, propulsion systems capable of reaching hypersonic speeds need to be developed. One of the more promising hypersonic propulsion systems is the scramjet engine, however, several problems still need to be explored before reliable scramjet engines can be produced, the biggest being keeping the engine ignited. This has led to the use of flame holder cavities to create a region of subsonic flow within the engine to allow combustion to occur. High experimental costs make the use of computational fluid dynamic (CFD) …

System Analysis Of An Internal Combustion Engine (Ice) – Solid Oxide Fuel Cell (Sofc) Hybrid Cycle, Jose Javier Colon Rodriguez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Due to the intermittent nature of renewable energy and the rigid operation of existing coal plants, the need for flexible power generation technology is eminent. Hybrid energy systems have shown potential for flexible, grid following dynamics while maintaining higher efficiencies. The work below focuses on the performance analysis of a proposed 100 kW pressurized Internal Combustion Engine (ICE) and Solid Oxide Fuel Cell (SOFC) hybrid system. The un-utilized fuel from the SOFC stack provided the chemical energy to operate the engine. A turbocharger was used to deliver the necessary air flow for both the stack and engine. An external reformer …

Dynamic Mode Decomposition Approach For Estimating The Shape Of A Cable, Yash Manik Chavan

Dissertations, Master's Theses and Master's Reports

This study investigates the dynamic behavior of a flexible cable with heterogeneous stiffness using a data-driven approach. The study aims to develop accurate models describing intricate structures with rigid or flexible components. To achieve this, reflective markers were attached to the cable at equal spacing, and the motion was manually excited and captured using an 8-camera setup and OptiTrack's Motive software.

The cable displacement data at the marker locations were used as initial conditions for various Dynamic Mode Decomposition (DMD) models. The performance of the data- driven cable model is compared against the performance of the DMD modeling approach, fitting …

Study Of Nanocomposite Materials Using Molecular Dynamics, Prashik Sunil Gaikwad

Dissertations, Master's Theses and Master's Reports

There is an increase in demand for new lightweight structural materials in the aerospace industry for more efficient and affordable human space travel. Polymer matrix composites (PMCs) with reinforcement material as carbon nanotubes (CNTs) have shown exceptional increase in the mechanical properties. Flattened carbon nanotubes (flCNTs) are a primary component of many carbon nanotube (CNT) yarn and sheet materials, which are promising reinforcements for the next generation of ultra-strong composites for aerospace applications. These flCNT/polymer materials are subjected to extreme pressure and temperature during curing process. Therefore there is a need to investigate the evolution of properties during the curing …

On The Gaussian-Core Vortex Lattice Model For The Analysis Of Wind Farm Flow Dynamics, Apurva Baruah

Dissertations, Master's Theses and Master's Reports

Wind power science has seen tremendous development and growth over the last 40 years. Advancements in design, manufacturing, installation, and operation of wind turbines have enabled the commercial deployment of wind power generation systems. These have been due, in a large part, to the expertise in the simulation and modeling of individual wind turbines. The new generation of wind energy systems calls for a need to accurately predict and model the entire wind farm, and not just individual turbines. The commercial deployment of these wind farms depends on model's ability to accurately capture the different physics involved, each at its …

Nanomaterials For Cardiovascular Engineering, Roya Bagheri

Dissertations, Master's Theses and Master's Reports

Cardiovascular diseases and disorders (i.e., those related to heart and blood vessels) are the main reasons for mortality worldwide. Nanomaterials, with their unique morphologies and properties, have a great potential for advancing cardiovascular engineering to treat diseases and disorders. In this dissertation, several cardiovascular applications of conductive nanomaterials were investigated. First, a conductive nanomaterial was explored to fabricate biohybrid nanomaterial-cardiomyocyte (CM – heart muscle cell) systems. Using Carbon Nanotube (CNT) forest as a 3D porous and conductive scaffold was investigated. The influence of the CNT forest on the viability, attachment, and spreading of CMs and their genetic information was …

Development And Testing Of A Low Mass Vibratory Lunar Compactor, Charles Carey

Dissertations, Master's Theses and Master's Reports

NASA and other agencies are working to return to the moon, with the Artemis Program [1]. As a part of this new effort, an emphasis is being placed on having a sustained presence, building lunar bases and other permanent structures. The development of such infrastructure will require the development of civil engineering structures, and site preparation becomes a necessity. The Planetary Surface Technology Development Laboratory is developing a low mass lunar compactor as part of an autonomous site preparation vehicle in partnership with Colorado School of Mines, funded by NASA’s 2021 Lunar Surface Technology Research grant. The low mass lunar …

Novel Bayesian Neural Networks And Uncertainty Quantification Of Computational Mechanics Models, Ponkrshnan Thiagarajan

Dissertations, Master's Theses and Master's Reports

Computational and data-driven models suffer from a wide range of uncertainties that impact the reliability of such models. Given the exponential proliferation of machine learning models in real-world systems, establishing a degree of confidence in their predictions becomes paramount. Reliability in predictions takes on utmost significance in domains such as autonomous driving, medical image analysis, etc., where human lives are involved, and inaccuracies in predictions could lead to disastrous outcomes. For these reasons, comprehending and quantifying uncertainties in computational and data-driven models is of utmost importance. A number of techniques have been developed to quantify uncertainties in machine learning models. …

Molecular Dynamics Modeling Of Polymers For Aerospace Composites, Swapnil Sambhaji Bamane

Dissertations, Master's Theses and Master's Reports

Polymer matrix composite materials are widely used as structural materials in aerospace and aeronautical vehicles. Resin/reinforcement wetting and the effect of polymerization on the thermo-mechanical properties of the resin are key parameters in the manufacturing of aerospace composite materials. Determining the contact angle between combinations of liquid resin and reinforcement surfaces is a common method for quantifying wettability. It is challenging to determine contact angle values experimentally of high-performance resins on CNT materials such as CNT, graphene, bundles or yarns, and BNNT surfaces. It is also experimentally difficult to determine the effect of polymerization reaction on material properties of a …

Alternative Method For Low Frequency Impact Sound Measurement For Building Field Tests, Sunit Girdhar

Dissertations, Master's Theses and Master's Reports

What do high heels, dog nails, and dragging furniture have in common? They are all frequent sources of noise pollution and annoyance in multi-story buildings. Building codes exist to control and mitigate such noise, but these codes are outdated and fail to protect the residents against noise annoyance. Footstep noise is still the number one cause of complaints among the residents. The impact performance of floor-ceiling assemblies is characterized using a single-number rating called the Impact Sound Rating (ISR). A standard tapping machine is used in pre-defined locations on the floor and the radiated Sound Pressure Level (SPL) is measured …