Engineering Commons^™

Metamaterial-Based Soft Actuators, Savannah June Cheney, Nathan Kessenich, Marco Leen, Merek Mcgill

Mechanical Engineering

For this project the team was tasked with designing a soft actuator that incorporated aspects of mechanical metamaterials. The team’s goal was to demonstrate the feasibility of structural metamaterials in the field of soft robotics and demonstrate a novel response with a final assembly. Also included in the team's discussion are the manufacturing steps, protype tests & results, and suggested future next steps. Following the previous report (critical design review) the team chose to follow the path of designing a continuum robot with metamaterials incorporated into the design. A continuum robot consists of a soft cylindrical body with rigid evenly …

Therapeutic Mechanical Horse Project, Broghan Martin, Carson Roff, Zach Barnisham, Lydia Barnes

Mechanical Engineering

This project team created a simple mechanical model of a horse that disabled children could ride on to feel more comfortable partaking in equine therapy. This project was sponsored by Jack’s Helping Hand as part of their equine therapy program. The team went through the entire design process of researching, ideating, prototyping, and testing to create the final product. Finite element analysis of the structural members of the horse was performed. The forces used in that model were later validated through testing of the strength of those same members after manufacturing. In the end, a self-actuating single degree of freedom …

Bespoke Bicycle Enclosure, Thomas Link, Kyle Mcafee, Marc Monier, Hunter Walden

Mechanical Engineering

Brian Higgins is an American veteran with retinitis pigmentosa who relies on cycling for transportation. The motivation for this project is to design and manufacture a refined prototype bicycle attachment to support him while biking in the rain and cold. The attachment will serve to enclose him for optimal protection from inclement weather, while maintaining sufficient mobility for daily cycling. Mr. Higgins’ bicycle is equipped with an attached sensor system which assists his visual impairment by using an ultrasonic sensor. Therefore, the attachment cannot adversely affect the function of the sensor system. The project timeline is set at approximately 7 …

Disc Golf Throwing Robot, Nevada S. Schultz, Sydney M. Lewis, Erick Edmundo Daza, Rachel Alysse Greenberg, Peter M. Kean

Mechanical Engineering

Disc golf companies need better methods to test disc flight. The scope of this project is to create a disc throwing robot that can throw a disc golf driver 450-500 feet, with control over the speed, spin, and release angle. Research shows that multiple disc-throwing products exist; however, none meet the full requirements of this project. The Cal Poly senior project design team created a proof-of-concept machine. This prototype started as a two-wheel mechanism. Eventually, a third wheel was added, allowing for complete control over disc spin. The three-wheel prototype reached 62 mph when perfectly calibrated. The prototype is accurate, …

Baja Sae Semi-Active Suspension, Cameron Paul Jones, Ethan Jacobi Mikel, Joshua Macguire Wright, Aditya Garg

Mechanical Engineering

This document outlines the design and justification for the final design of the Baja SAE Semi-Active Suspension Senior Project. The goal of the project was to build a base valve that can adjust suspension damping rates on the fly. This document details the ideation, design, manufacturing, design verification results, and detailed drawing package for the project. Additionally, this document includes information regarding the pressure drop calculator, O-ring calculations, and CAD. The manufacturing processes used to create the valve and the testing and evaluation of the valve are included as well. Finally, the methods that were used to manage this project …

Novel Approach For Non-Invasive Prediction Of Body Shape And Habitus, Emma Young

Electronic Theses and Dissertations

While marker-based motion capture remains the gold standard in measuring human movement, accuracy is influenced by soft-tissue artifacts, particularly for subjects with high body mass index (BMI) where markers are not placed close to the underlying bone. Obesity influences joint loads and motion patterns, and BMI may not be sufficient to capture the distribution of a subject’s weight or to differentiate differences between subjects. Subjects in need of a joint replacement are more likely to have mobility issues or pain, which prevents exercise. Obesity also increases the likelihood of needing a total joint replacement. Accurate movement data for subjects with …

Mechanics Desktop Lab Equipment, Dante Azpilcueta, Quentin F. Mormann, Arfan Ansar

Mechanical Engineering

This paper overviews the design, implementation and testing of a senior project designed to fix the issue of there being no lab equipment or space for content pertaining to mechanic of materials topics. This is of concern as Cal Poly is reorganizing content as it switches to the semester system and is in need of labs for this material. The solution found was to create a portable miniature universal test machine that could be carted into non-lab classrooms. The goal was to create a device that was low-cost, modifiable, durable, easy to manufacture and repair as these were the qualities …

Valve Efficiency Testing Device, Jake Robert Rydberg, Andrew Keith Willardson, Jake Ben Jezier, Emily Marie Wannenmacher

Mechanical Engineering

This document serves as the official Final Design Review (FDR) for the mechanical engineering team on the Valve Efficiency Testing Device project for the Phillips 66 Rodeo Refinery. The team attends California Polytechnic State University, San Luis Obispo. The project involved designing and building a valve efficiency testing device. The goal was to create a finished test device that can be used in the Phillips 66 Rodeo Refinery machine shop to test reciprocating compressor valves before they are installed. The purpose of this document is to describe the manufacturing and design verification activities that have been completed since Critical Design …

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Thermohydraulic Performance Of 3d Printed Metal Heat Exchanger With Zig-Zag Minichannels, Aysha Rashed Alshamsi

Theses

This work proposes using zig-zag minichannels in heat exchangers for enhancing its performance while operating under balanced (heat capacity ratio of unity) and unbalanced flow (heat capacity ratio of 0.5) conditions for counter flow and parallel flow configurations. The performance of the heat exchangers is quantified in terms of effectiveness and pressure drops and studies are done for hot fluid Reynolds number ranging from 50 to 1500. This work employs a numerical study to investigate the performance of the heat exchanger with zig-zag minichannels.
/="/">Simulation is carried out using Fluent module of Ansys Workbench. The model used for simulation …

A Study On The Design And Production Of A Desktop Vaccuum Cleaner, Aaryan Manoj Nair, Emanuel Pichardo, Isaiah Ortiz, Naeem Kotadia

Publications and Research

The goal of this project was to design a desk-top vacuum cleaner that is compact, portable, and effective in cleaning desktops and tabletops. Two concepts were proposed and compared using Quality Function Deployment (QFD) and various metrics, including in-use purposes and market, technical feasibility, ease of use, durability, and cost. The two concepts were a lifting design with hydraulics and a differently sized offset wheel design. After thorough analysis, it was determined that the lifting design with hydraulics was the better concept due to its adjustability and ability to reach different heights and angles on tabletops. The proposed product title …

Biomechanical Knee Joint For Exoskeleton, Gabriel Ireton Ahern, Calloway Miller, Christianna Altamura, Eric Mailes

Mechanical Engineering

Our senior design project consisted of designing and manufacturing a biomechanically accurate, actuated knee joint to be integrated into an exoskeleton being developed by the Lower Limb Exoskeleton Assist Project (LLEAP), a part of the EMPOWER student association at Cal Poly, San Luis Obispo. As the human knee flexes and extends throughout gait motion, the center of rotation changes. Currently marketed exoskeletons have one point of rotation, which over constrains the knee and causes misalignment between the user and the suit [1]. Our goal was to mimic natural knee joint motion by changing the center or rotation, thus reducing misalignment …

Turbine Integrated Pitching System, Elizabeth Costley, Josephine Maiorano, Jeff Larson, Cameron Jackson

Mechanical Engineering

The Cal Poly Wind Power Club (CPWP) tasked this senior project to design, manufacture, test, and deliver a mechanism to pitch the blades for their small-scale horizontal axis wind turbine. CPWP competes in the Collegiate Wind Competition (CWC) against schools across the country, and as such it was critical to comply with the provided competition rules in addition to the design requirement from CPWP. The purpose of the pitching mechanism is to improve the performance and efficiency of the wind turbine by allowing the blades to adjust angles with different wind speeds. Specifically, this project aimed to minimize hub size, …

Prove Primary Battery Structure, John D. Burkhart, Andy Mccormick, Ryan Yu, Soren Barclay

Mechanical Engineering

In conjunction with Prototype Vehicle (PROVE) Laboratory, our group designed, manufactured, and tested a prototype structure to house the battery boxes for PROVE’s endurance vehicle. Our structure was designed to support the batteries during normal use, and in the event of a front crash. Our design is comprised of a secondary composite box to house the battery boxes, a bottom plate to affix the secondary box to the chassis floor, a horizontal plate fastened to the chassis, and a brace structure welded to the chassis. From the outset, we chose to use a secondary box, the primary battery boxes must …

Rapid Composter, Shannon Shinozaki, Avin Atencio, Jonathan Fraser, Lukas Kolbl, Russell Occhipinti

Mechanical Engineering

This project was created with the intent of automatically composting equine bio waste to be reused as plant fertilizer. The system consists of four subsystems: power generation and storage, automatic controls, aeration, and structure. Each subsystem may be manufactured independently, then put together. This system will not have access to power outlets, so it was designed to be solar-powered.

Parametric Bicycle Yoke, Colin Reay, Walter Minehart, Robby Harrigan, Jordan Olson

Mechanical Engineering

This report outlines the entire design, fabrication, and validation process of a parametric yoke design that addresses the packaging problem of the bottom-bracket chainstay junction in modern bicycle frames. The goal was to create an elegant, space-efficient solution that is accessible to the Cal Poly Bike Builders Club. The report includes documentation of the three-part fixture system, manufacturing process, and testing results for the yoke.

Our yoke design outperforms traditional round-tube weldments in torsional and vertical stiffness. Additionally, all manufacturing fixtures and machining operations function as intended, resulting in a finished yoke that meets all required tolerances in under an …

Treadmill Platform For Quadrupedal Robots, Baxter J. Bartlett, Jack F. Butler, Phillip A. Shafik, Tarun S. Ganamur

Mechanical Engineering

Cal Poly Legged Robots, led by Professor Refvem and Professor Xing, has been leading Cal Poly’s attempts to simulate, produce, and test their legged robots. The initial testing of the locomotion of these robots can be dangerous to the robot since any bugs in the code could cause the robot to fall over and harm itself. Our responsibility as a team was to deliver a portable platform for testing the locomotion capabilities containing a fall prevention mechanism. In short, we have designed a platform for this purpose that consists of a treadmill surrounded by a wheeled chassis with a system …

Perforated Groove Cam Lock, Matthew J. Redmond, Samuel A. Potter, Dylan Weiglein, Andrew Reese

Mechanical Engineering

NASA Artemis III astronauts need a way to attach and detach various tools to an extension handle to be used during lunar EVA sample collection. Because lunar dust is so harsh and abundant, mechanisms must be designed to function regardless of the number of contact particulates. Past designs used on the Apollo missions proved to be problematic for their operators, opening the door for innovative improvement. A new mechanism has been proposed that directly addresses the performance issues of the original handle extension mentioned in NASA’s Apollo mission reports. The new mechanism boasts an open design that promotes dust tolerance …

3d Printed Aircraft, Matthew Nagy, Charles D'Amico, Alexis Salgado Medina

Mechanical Engineering

This project is to design, build, and test a 3D-printable aircraft. The goal is to create a final design that will be able to fly for the longest duration possible, around 20 seconds. To determine the correct preliminary design and manufacturing process for a 3D printed RC aircraft, an analysis of multiple design options and manufacturing materials was performed. This allowed for a variety of choices for aircraft type, airfoil design, structure, among other topics to be narrowed down to the most promising option. It has been found that the aircraft will follow a design similar to industry motor-gliders, with …

Backflow Relief Valve Test Stand, Olivia Mcnulty, Wiill Halvorsen, Ryan Dubois, David Leaman

Mechanical Engineering

This Final Design Review (FDR) document details the final design, manufacturing, testing, and results of the Zurn Wilkins Backflow Relief Valve Test Stand Project under the sponsorship of Brian Yale and Rueben Westmoreland. This project involves simulating real-world conditions of static pressure and water hammer cycling. The stand will give Zurn Wilkins’ engineers a method by which to test their relief valves prior to a rigorous, yearlong University of Southern California (USC) testing procedure. Our design involves using city water, a pump, a Zurn backflow preventer, and a control system to apply specific pressures to each end of the relief …

Saver: Surface Autonomous Vehicle For Emergency Rescue, Lucas Je Sandsor, Michelangelo Coltelli, Brian Wong, Sebastion Rivero, Kobe Hayashi

Mechanical Engineering

The design, fabrication, and testing of an unmanned surface vehicle for the NASA Micro-G NExT SAVER challenge. This device features a radio direction finding phase array to autonomously navigate to an emergency distress beacon to deliver emergency supplies.

Gas Metal Arc Welding With Undermatched Filler Wire For Hot-Press-Formed Steel Of 2.0 Gpa Strength: Influence Of Filler Wire Strength And Bead Geometry, Dong-Yoon Kim, Cheolhee Kim, Tae Hyen Lee, Minjung Kang, Junhong Park

Mechanical and Materials Engineering Faculty Publications and Presentations

Commercial welding filler wires have less strength than hot-press-forming (HPF) steels. As the 2.0 GPa-HPF steel sheets have been released, their lap welding characteristics were investigated using gas metal arc welding in this study. The base metal was 1.1 mm-thick 2.0 GPa-HPF steel sheets, and three filler metal wires considered in this study (W540, W920, and W980) had tensile strengths of 540, 920, and 980 MPa, respectively. Gas metal arc welding was performed under a controlled short-circuit mode, and the wire feed speed (WFS) was selected as a process parameter. Tensile-shear test and microscopy were performed to evaluate the joint …

Spheroidization Heat Treatment Conditions With Data Analysis In Medium Carbon Cr-Mo Steel For Ultra High Strength Cold Heading, Yong Deok Jo, Sung Yi, Byoung Lok Jang

Mechanical and Materials Engineering Faculty Publications and Presentations

The degree to which parameters affect the spheroidization heat treatment of steel was calculated by setting the spheroidization heat treatment conditions of Cr-Mo steel and using data analysis such as S/N ratio and ANOVA. After analyzing the transformation temperatures of the steel, A_c1 and A_c3, using a DSC, the conditions were set accordingly. The surface hardness was measured for the conditions and used as an evaluation index. The correlation was analyzed by comparing the spheroidized volume fraction and the surface hardness, and the Pearson correlation coefficient was -0.88, proving that a correlation existed between the two values. …

Measurement Of Polycyclic Aromatic Hydrocarbons (Pahs) On Indoor Materials: Method Development, Aurélie Laguerre, Elliott T. Gall

Mechanical and Materials Engineering Faculty Publications and Presentations

Wildfire smoke penetrates indoors, and polycyclic aromatic hydrocarbons (PAHs) in smoke may accumulate on indoor materials. We developed two approaches for measuring PAHs on common indoor materials: (1) solvent-soaked wiping of solid materials (glass and drywall) and (2) direct extraction of porous/fleecy materials (mechanical air filter media and cotton sheets). Samples are extracted by sonication in dichloromethane and analyzed with gas chromatography–mass spectrometry. Extraction recoveries range from 50–83% for surrogate standards and for PAHs recovered from direct application to isopropanol-soaked wipes, in line with prior studies. We evaluate our methods with a total recovery metric, defined as the sampling and …

The Role Of High-Order Anharmonicity And Off-Diagonal Terms In Thermal Conductivity: A Case Study Of Multi-Phase Cspbbr3, Xiangdong Ding, Guimei Zhu, Yi Xia, Jie Ren, Jun Sun, Multiple Additional Authors

Mechanical and Materials Engineering Faculty Publications and Presentations

We investigate the influence of three- and four-phonon scattering, perturbative anharmonic phonon renormalization, and off-diagonal terms of coherent phonons on the thermal conductivity of CsPbBr3 phase change perovskite, by using advanced implementations and first-principles simulations. Our study spans a wide temperature range covering the entire structural spectrum. Notably, we demonstrate that the interactions between acoustic and optical phonons result in contrasting trends of phonon frequency shifts for the high-lying optical phonons in orthorhombic and cubic CsPbBr3 as temperature varies. Our findings highlight the significance of wavelike tunneling of coherent phonons in ultralow and glasslike thermal conductivity in halide perovskites.

Implementation Of Topology Optimization Into The Mechanical Design Process, Nolan Clapp

Master's Theses

Topology Optimization is a lightweighting method based on finite element analysis that produces a part with optimum material distribution in the design space. Results from topology optimization often have organic shapes and curves that are difficult if not impossible to machine with traditional subtractive manufacturing methods. This paper analyzes the implementation of the Solidworks® Topology Optimization add-in into the mechanical design process and discusses required postprocessing to ensure manufacturability of the optimized part though a case study on two example parts. Results of traditional optimization, topology optimization and “selective” optimization (optimization using the results from topology optimization to selectively remove …

Statistical Uncertainty Of The Ignition Time, Burning Rate, And Extinction Characteristics Of Engineered Timber Products, Jacob David

Master's Theses

The characterization of flammability parameters such as time to ignition, mass loss rate (MLR), and extinction criteria is critical for understanding ignition and burning behavior of timber products. These parameters, often determined with bench scale experiments, have previously been presented in literature. However, standard test methods generally use relatively low trial quantities (e.g., n=3) which can potentially cause large variation in reported values. This study investigates the influence of trial quantity on observed statistical variation in key flammability metrics for timber products (e.g., ignition time, peak MLR, MLR at extinction). Using a conical heater, 100 repeat trials were conducted …

Development Of A Low-Cost Acoustic Gauge For Simultaneous Tide And Wave Measurement, Alexander Kalman Dunn

Master's Theses

High-quality tide and wave data are essential in a variety of fields including coastal engineering, climate science, disaster response, and recreational activities. Accurate data are publicly accessible from government organizations such as the National Oceanic and Atmospheric Administration (NOAA), however the high costs associated with deploying and maintaining their high accuracy gauges results in a deficit of localized data. Commercial gauges available starting at $2,000 are still expensive for local agencies and individual users to deploy and maintain. These commercial options can also be limited in their scope, accuracy, or ease of use. In this thesis, a low-cost acoustic gauge …

Wave Energy Converters With Rigid Hull Encapsulation: A Review, Mahmodul Hasan Maheen, Yingchen Yang

Mechanical Engineering Faculty Publications

Highlights

• WECs with rigid hull encapsulation are water-tight and robust.

• Diverse internally embedded power take-off designs are summarized.

• Various mechanisms and strategies for frequency tuning are formulated.

• Typical WEC testing methods are discussed.

• Some future research considerations are suggested.

Abstract

Ocean wave energy has a great potential in mitigating energy and sustainability crises of the 21st century. The lack of mature and cost-competitive wave energy converter (WEC) technologies, however, has become a major roadblock for WEC products entering the marketplace. A harsh ocean environment, which includes extreme waves, strong biological activities, and chemical transformations, adds to the maintenance cost and …

Programmable Vibration Table Retrofit With Eagle Medical, Jonathan Ilagan, Madhav Asok, Max Lewter

Biomedical Engineering

This project aimed to repair and upgrade a vibration table used for package testing for the sponsor, Eagle Medical - a medical packaging and sterilization company based in Paso Robles, California. The current vibration table is not programmable and lacks circuit diagrams, making it difficult to repair. In addition, it is not functional due to internal circuitry issues and power requirements. To address these issues, the team will implement several upgrades to improve the product and allow for better random cyclic vibration testing. A full assessment of the existing vibration table will be conducted to ensure the viability of these …