Engineering Commons^™

Thermohydrodynamic Analysis Of A Boiling Water Reactor, Nahed Youssef Morcos

Archived Theses and Dissertations

No abstract provided.

Computer Data Acquisition, Control, And Analysis For The University Of Tennessee At Chattanooga's Internal Combustion Engine Labratory, Ahmad Noureddine

Masters Theses and Doctoral Dissertations

For any data acquisition instrumentation, it is essential to have a voltage or current signal output from any transducer that needs to be monitored.Nine OMEGA thermocouples were installed on the Ford engine-Megatech dynamometer system to monitor the temperature of the exhaust gases at different locations and the coolants entering and leaving the dynamometer and the radiator.Those thermocouples have an output signal of O - 55 mv.The TESCOM gas analyzer system measures the concentrations of the different gases present in the exhaust system of the engine and produces an analog output signal (0 - 100 mv) that is used for data …

Ole Miss Engineer 1990

Ole Miss Engineer

No abstract provided.

Data Communication Between An Expert System Shell And A Conventional Algorithmic Program With Application To Cam Motion Specification, Paul P. Lin, An-Jen Yang

Mechanical Engineering Faculty Publications

Although more and more expert system shells have begun to provide communication interfaces to conventional procedural languages, the interfaces are basically shell- and language-dependent. This paper presents a simple, shell- and language-independent data communication technique between a shell and a procedural language via a concept analogous to the handshake data transmission used in microprocessors. A control file is used for the action of handshake. The communication interface is between two data files in two different language environments. A program written in a LISP-based expert system shell, OPS 5, and one written in a procedural language, FORTRAN, were …

Eigensensitivity Analysis For Space Structures With Applications In Design Optimization, Sean Patrick Kenny

Mechanical & Aerospace Engineering Theses & Dissertations

Eigensensitivity analysis is concerned with the rates of changes of eigenvalues and eigenvectors with respect to design variables. Eigensolutions of space structures are found to display four distinct characteristics, three of which are related to various types of repeated eigenvalues. This study will address three cases of the real symmetric structural eigenvalue problem. The three cases that will be considered are: distinct eigenvalues, repeated eigenvalues with distinct first eigenvalue derivatives, and repeated eigenvalues with infinitely repeating eigenvalue derivatives. Analytic formulations for eigenvalue/ vector derivatives will be presented for each of the three cases. The directional differentiability of eigenvalues for the …

Radiative Interactions In Laminar Duct Flows, Prakash A. Trivedi

Mechanical & Aerospace Engineering Theses & Dissertations

Analyses and numerical procedures are presented for infrared radiative energy transfer in gases when other modes of energy transfer occur simultaneously. Two types of geometries are considered, a Parallel Plate Duct and a Circular Duct. Fully developed laminar incompressible flows of absorbing-emitting species in black surfaced ducts are considered under the conditions of uniform wall heat flux. The participating species considered are OH, CO, CO₂, and H₂O. Nongray as well as gray formulations are developed for both geometries. Appropriate limiting solutions of the governing equations are obtained and conduction-radiation interaction parameters are evaluated. Tien and Lowder's …

The Influence Of Payload Dynamics On Trajectory Tracking Performance Of Robot Manipulator, Atul G. Kelkar

Mechanical & Aerospace Engineering Theses & Dissertations

Future space mission plans call for extensive use of remote manipulator systems for tasks such as assembly of lunar vehicles or space station modules, servicing of satellites, etc. These tasks demand very high precision end-effector motion control. Methods for compensating manipulator dynamics to achieve better trajectory tracking performance have been investigated by many researchers. Still, it is not always clear whether the added complexity of dynamic compensation is warranted for a given system. As an aid in evaluating when dynamic compensation is required, this thesis presents a method for the determination of maximum endpoint tracking error due to uncompensated inertial …

A Systematic Procedure For The Analysis And Design Of Deployable Space Structures, Praveen Kumar

Mechanical & Aerospace Engineering Theses & Dissertations

An integrated graph theory and a symmetry-based approach have been developed for the type synthesis of deployable truss structures. Using this systematic approach, a bay of a deployable structure may be looked upon as being built around an axis or a plane of symmetry, including anti-symmetry. By providing a fictitious joint along this axis, the problem of structural design and analysis can be reduced to the study of one plane or face of the given structure. Each face is considered to be an assemblage of structural links connected by joints which form a closed kinematic chain. The conventional graph representation …

Nonproportionally Loaded Steel Beam-Columns And Flexibly-Connected Nonsway Frames, Siva Prasad Darbhamulla

Civil & Environmental Engineering Theses & Dissertations

A theoretical study of the inelastic stability of nonproportionally loaded steel beam-columns and flexibly-connected frames is conducted. Specifically, solution techniques are formulated to predict the nonlinear behavior of cross sections, spatial beam-columns, and nonsway plane frames under the combined influence of imperfections, flexible connections, and nonproportional loads. A set of new inelastic slope-deflection equations for imperfect members are derived and their use illustrated through in-depth studies of flexibly-connected portal and two-bay two-story frames. These equations are derived from a system of nonlinear ordinary differential equations. The member studies are carried out using a second-order finite-difference solution to a set of …

An Experimental Study Of An Axisymmetric Turbulent Boundary Layer Disturbed By A Periodic Freestream, Chithrabhanu Koodalattupuram

Mechanical & Aerospace Engineering Theses & Dissertations

Behavior of an axisymmetric equilibrium turbulent boundary layer disturbed by a propeller wake in the freestream was investigated experimentally. Tests were conducted in a low speed wind tunnel and measurements of turbulence quantities were made using an X wire probe and a constant temperature anemometer. The boundary layer flow on a cylindrical body was characterized by measuring its gross parameters and comparing them with classical values. Propeller speed was measured using an electronic circuit whose output signal was also used to trigger hot wire probe. Gross boundary later characteristics of the disturbed boundary layer did not deviate appreciably from the …

Control And Mechanism Interaction For Ground-Based Testing Of Space Structures, Li-Farn Yang

Mechanical & Aerospace Engineering Theses & Dissertations

In the ground-based validation testing, the adverse effect of terrestrial conditions such as a gravitational force interferes with the dynamic behavior of space structures. A suspension system is developed to assess the structural characteristics in a simulated zero-gravity environment. Using a mechanisms approach, the synthesis of a noncircular disk with a torsional spring at its rotational axis is designed to counteract the gravitational force of test structures during the testing.

The multibody dynamics of a flexible steel beam carried on a rigid trolley has been investigated. The system is constructed in such a way that the rapid and large-angle slewing …

Monitored Performance Enhancement Of A Radiant Barrier Automobile Window Shade, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

The Florida Solar Energy Center (FSEC) has monitored several automobiles in order to investigate how hot interior temperatures in parked cars might be reduced through the use of improved technology car shades. We observed interior temperatures in un-shaded stationary automobiles in Cape Canaveral, Florida to commonly reach 150° F and dashboard temperatures to rise to nearly 200° F. We found the addition of a conventional cardboard car shade behind the automobile windshield on sunny days to reduce the interior air temperatures by an average of 15° F. Dashboard temperatures were reduced by 40° F.

We found radiant barrier system (RBS) …

Method Of Magnetizing Nonmagnetic Materials, Jiann-Yang Hwang

Michigan Tech Patents

Particles of a nonmagnetic material are rendered magnetic by contacting their surfaces with a magnetizing reagent comprising water containing particles of a magnetic material, each of which has a two layer surfactant coating including an inner layer and an outer layer. The inner layer covers the magnetic particle and is a mono- molecular layer of a first water soluble, organic, hetero- polar surfactant containing at least 3 carbon atoms and having a functional group on one end which bonds with the magnetic particle. The outer layer coats the inner layer and is a monomolecular layer of a second water soluble, …

A Transient Electromagnetic Flowmeter And Calibration Facility, Paul J. Lefebvre, William W. Durgin

Office of the Provost Scholarship

An electromagnetic flowmeter was developed to measure transient flows at a data rate of 60 Hz. The approach taken was to develop suitable electronics to replace the electronics of a commercially available electromagnetic flowmeter normally used for steady-state operation. Use of the commercially available flowmeter body, which includes the magnetic coils, core, and signal electrodes, provided a relatively economical means of fabricating the transient flowmeter. A transient flow calibration facility consisting of a free-falling water column was also designed and built. Results of the calibrations are presented and show that the flowmeter can accurately measure transient flows up to the …

Analytical And Experimental Study Of Robotic Peg-In-Hole Insertion, Yilun Jia

Theses

A mathematical model of robotic peg-in-hole insertion, which relates insertion force and moment to manipulator compliance and geometric constraints, is presented. Based on this model, the effects of manipulator compliance and geometric and positional parameters on the insertion are studied. The complete expressions for determining the insertion forces and moment as well as the peg kinematics are derived. The study is helpful to reducing insertion force and moment and avoiding possible jamming during the insertion process. The model is verified experimentally on the IBM 7540 robot.

Computer Integrated Manufacturing : A Systems Approach For Small Manufacturing Enterprises, Sanjeet Jagdish Patel

Theses

This work is dedicated to small manufacturing enterprises seeking to explore Computer Integrated Manufacturing (CIM) technology, which is the recent trend in the manufacturing world. The main therie of this thesis is to improve productivity, product quality and reliability and reduce costs by integrating various disciplines.

Generic manufacturing functions including order entry, inventory control, manufcturing planning and control, automated drafting, direct numerical control etc. were enhanced by the effective utilization of low end workstations grouped together into a network and equipped worth industry standards software.

The introduction of computers into a manually resourced system yielded significant results such as reduction …

Development Of A Flexible Control And Automated Data Acquisition System For Wear Testing, Wen-Long Yao

Theses

The purpose of this work is to develop a flexible control and automated data acquisition system for wear testing procedure. A programmable logic controller (PLC) control philosophy and PC-based automated data acquisition system (DAS) were designed and organized for the wear testing machine in Surface Engineering Laboratory of Mechanical Engineering Department. The designed and performed separation of control and acquisition strategies saved a lot of engineering interface communication time. Several instrumentations and mechanism designs, such as selected RTD sensor, modified testing shoe for RTD installation, designed controlled lubrication mechanism, and designed load-unload mechanism, have been performed to fulfill the concerned …

Ultrasonic Measurement Of The Geometric Parameters Of Gaseous Voids In Low Gravity Fluid Containers, A. T. Patten, William W. Durgin

Office of the Provost Scholarship

A demonstration system for the ultrasonic gauging of fluids in low-gravity has been designed and tested. For purposes of simplification, it was assumed that vapor within a liquid container in low-gravity would form a spherical bubble which would float freely in the container. The project was designed to show that ultrasonic techniques could be used to determine the geometry of the resulting sphere given a worst-case transducer arrangement. The motivation was to simplify transducer mounting requirements so that propellant or other storage vessels could be fitted with ultrasonic gauging systems with a single or perhaps a few transducer penetrations. Data …

Nebraska Summary: S119 Ford Versatile 846, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Robust Nonlinear Control Of Brushless Dc Motors In The Presence Of Magnetic Saturation, N. Hemati, J. S. Thorp, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A robust control law is derived and examined for a direct-drive robot arm driven by a brushless DC motor (BLDCM). The complete dynamics of the motor and its interaction with the robot arm are accounted for. This is important, since in a direct-drive servo system the torque generated by the motor is directly transmitted to the load. Effects of magnetic saturation as well as reluctance variations are accounted for, in order to ensure accuracy. The effectiveness of the method is examined through computer simulations. The computational complexity of the overall control scheme is such that it can be readily used …

Use Of Energy In Data-Track Association And State Estimation In Multitarget-Multisensor Problems, S. N. Balakrishnan, H. Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A coarse test and a fine test have been formulated for use in multiple sensor-multiple target data-track association. Various forms of energies are used in these tests to pick the proper data to be associated with any target. Numerical experiments which involve the use of a decentralized Kalman filter scheme are presented. The experiments show the effectiveness of the two tests

A Complete Model Characterization Of Brushless Dc Motors, N. Hemati, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The modeling problem associated with brushless DC motors (BLDCMs) with nonuniform air gaps which operate in a range where magnetic saturation may exist is addressed. The mathematical model, includes the effects of reluctance variations and magnetic saturation to guarantee proper modeling of the system. An experimental procedure is developed and implemented in a laboratory environment to identify the electromagnetic characteristics of a BLDCM in the presence of magnetic saturation. It is demonstrated that the modeling problem associated with this class of BLDCM can be formulated in terms of mathematically modeling a set of multidimensional surfaces corresponding to the electromagnetic torque …

A Study Of The Hydration Properties Of Selected Laser Dye Aerosols Including Continuous-Flow Parallel Plate And Alternating-Gradient Thermal Diffusion Cloud Chamber Measurements In The High Supersaturation Regime, Donald E. Hagen, Max B. Trueblood, Darryl J. Alofs

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Hydration Behavior of Aerosols made Up of Various Fluorescent Dyes when Exposed to Water Saturation or Supersaturated Conditions Has Been Studied. Critical Supersaturation Spectra Are Reported. the Dyes Are Found to Behave as High Molecular Weight Ionic Compounds that Obey Kohler Theory. their Relevant Kohler Parameters Are Measured. This Study Makes Use of and Compares Results from the Isothermal Hazecontinuous-Flowand Alternating-Gradient Thermal Diffusion Cloud Chambers. the Ability of the Continuous-Flow Thermal Diffusion Chamber to Operate Correctly at High Supersaturations is Shown. © 1990 Elsevier Science Publishing Co., Inc.

Nebraska Summary: S073 Massey Ferguson 362, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S122 Massey Ferguson 3120, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S118 Ford Versatile 9030, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S095 S.A.M.E Antares 130, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S130 Massey Ferguson 399, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1637: White 80 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1638: Belarus 420a And 400a Diesel 11-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …