Engineering Commons^™

Nebraska Summary: S076 Case-Ih 5130, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Monitored Residential Space Cooling Electricity Consumption In A Hot-Humid Climate: Magnitude, Variation And Reductionfrom Retrofits, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

There are few end-use studies that report monitored space cooling energy consumption for residential buildings in hot-humid climates. This paper reports data from 25 occupied single-family houses in Palm Beach County, Florida (Messenger et.al. 1982). The houses were first monitored for one year in 1981 to establish their space cooling consumption. After the first year of monitoring they received a battery of retrofits predicted to reduce household energy use. Incorporated measures included conversion to high-efficiency air conditioners or heat pumps, added ceiling insulation, window films, awnings, zoned conditioning systems and ceiling fans. The houses were then monitored for an additional …

Thermal Dynamic Problems Of Reinforced Composite Cylinders, Victor Birman

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Thermal dynamic problems of circular cylindrical composite shells reinforced in the axial and circumferential directions and subject to variations of temperature are considered. Nonlinear governing equations are formulated based on the extension of Donnell shell theory. These equations are used to determine the response of geometrically nonlinear and linear shells to a thermal loading represented by the Heaviside step function (thermal shock). The solution of the nonlinear problem obtained by the assumption that displacements are single-term functions of coordinates is discussed. The analysis of the linear problem illustrates different types of response to thermal shock. The condition of thermally induced …

Planning Optimal Robot Trajectories By Cell Mapping, W. H. Zhu, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A cell-mapping method is introduced for planning global trajectories of robotic manipulators in cases where the cell space is composed of combination pairs of plane cells. With the proposed method, optimal trajectory problems in the free field and in the obstacle-constrained field are studied. Two numerical examples are given to show the obtained optimal trajectories and controls.

Test 1640: Belarus 822, 820, 800m And 802m Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1641: Belarus 1770 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Economics Of Interceptor Drains : A Case Study, Andrew Bathgate, Ian Evans

Journal of the Department of Agriculture, Western Australia, Series 4

This case study determines the most likely rate of return to capital invested in constructing seepage interceptor drains to reduce the effect of waterlogging on crop and pasture yields. The analysis of a farm in the Denbarker region, west of Albany, determined what increases were needed in pasture growth to justify the cost of constructing drains across four adjacent paddocks. The benefits of changing rotations to include lupins were also determined, as growing lupins was unprofitable before the construction of drains.

Nebraska Summary: S077 Case-Ih 5140, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S124 Massey Ferguson 3660, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S123 Massey Ferguson 3140, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1636: White 60 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Discussion Of The Representation Of Intercrystalline Misorientation In Cubic Materials, Brent L. Adams, Hans Grimmer, Junwu Zhao

Faculty Publications

BLA and JZ acknowledge the support of the Office of Basic Energy Science of the US Department of Energy under grant No. DE-FG02-88ER45355. Help from Stuart Wright with the figures is gratefully acknowledged. Salient features of various parameterizations of cubic-cubic misorientation are discussed. It is proposed that the quaternion representation of rotations, as a pair of antipodal points on the surface of a four-dimensional sphere, encompasses the most desirable properties of other proposed representations, viz rectilinearity, a closed form for the composition of successive rotations, and an equivalence between the Euclidean measure on its parameter space and the invariant measure …

Thermoelastic Problem Of A Thick Orthotopic Beam On Twodirectiooal Elastic Foundation, Victor Birman

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The thermoelastic problem of an orthotropic beam supported by an elastic foundation which resists lateral deformations as well as displacements parallel to the beam axis is considered. The solution for a relatively thick beam is obtained based on the first-order shear deformation theory. The problem is reduced to- the solution of an ordinary seventh-order differential equation which can be obtained in the closed form. The case of a slender beam is treated as a particular case of a more general solution for a shear deformable beam. © 1990 ASME.

Effect Of Viscoplastic Flow Rules On The Initiation And Growth Of Shear Bands At High Strain Rates, R. C. Batra, Chang-Soo Kim

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Marchand and Duffy have reported detailed measurements of the temperature and strain as a shear band develops in a HY-100 steel. Assuming their torsional tests in thin-wall tubes can be adequately modeled by a viscoplastic block undergoing overall adiabatic simple shearing deformations, we investigate the effect of modeling the viscoplastic response of the material by a.power law, and flow rules proposed by Litonski, Bodner and Partom, and Johnson and Cook. Each of these flow rules is first calibrated by using the test data at a nominal strain-rate of 3300 s-1. Then predictions from the use of these flow rules at …

Combined Solar And Internal Load Effects On Selection Of Heat Reclaim-Economizer Hvac Systems, Harry J. Sauer, Ronald Hunter Howell, Zijie Wang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The concern for energy conservation has led to the development and use of heat recovery systems which reclaim the building internal heat before it is discarded in the exhaust air. On the other hand, economizer cycles have been widely used for many years in a variety of types of HVAC systems. Economizer cycles are widely accepted as a means to reduce operating time for chilling equipment when cool outside air is available. It has been suggested that heat reclaim systems should not be used in conjunction with an HVAC system which incorporates an economizer cycle because the economizer operation would …

Robust Nonlinear Control Of Brushless Dc Motors For Direct-Drive Robotic Applications, N. Hemati, J. S. Thorp, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The control problem associated with brushless DC motors (BLDCMs) for direct-drive robotic applications is considered. In order to guarantee the high-performance operation of BLDCMs in such applications, the effects of reluctance variations and magnetic saturation are accounted for in the model. Such a BLDCM model constitutes a highly coupled and nonlinear dynamic system. Using the transformation theory of nonlinear systems, a feedback control law, which is shown to compensate for the system nonlinearities, is derived. Conditions under which such a control law is possible are presented. The need for the derivation of explicit commutation strategies is eliminated, resulting in reduction …

A Differential Equation Approach To Swept Volumes, Ming-Chuan Leu, Denis Blackmore

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An approach to the analysis of swept volumes is introduced. It is shown that every smooth Euclidean motion or sweep, can be identified with a first-order, linear, ordinary differential equation. This sweep differential equation provides useful insights into the topological and geometrical nature of the swept volume of an object. A certain class, autonomous sweeps, is identified by the form of the associated differential equation, and several properties of the swept volumes of the members of this class are analyzed. The results are applied to generate swept volumes for a number of objects. Implementation of the sweep differential equation approach …

Dealing With Heat & Humidity In Florida Homes, Florida Solar Energy Center, Robin Vieira

FSEC Energy Research Center®

Energy conservation is the solution to the problem of high electric bills. Much is known about home heating conservation, but conservation measures for cooling are not as well-known or widely practiced. This energy note focuses on heat and humidity sources that cause Floridians to run their air conditioners. It also presents conservation techniques that will reduce those air-conditioning requirements.

Correlation Between Particle Velocities And Conditions Of Abrasive Waterjet Formation, Wei-Long Chen

Dissertations

The velocities of water and abrasive particles in abrasive waterjet(AWJ) were measured by the use of Laser Transit Anemometer(LTA). A setup for the velocity measurement was constructed and a statistical technique was used to improve the accuracy of the velocity determination. A comparison of the magnitude of velocities determined by LTA, Piezoelectric Force Transducer and Schlieren Photograph clearly indicates the feasibility of the use of LTA.

The velocities of water and particles were measured for different diameters of water and slurry nozzles, abrasive mass flow rates and particle sizes. The performed experiments enabled us to evaluate the effects of conditions …

Solar Energy In Florida, Florida Solar Energy Center, Carolyn King Burns

FSEC Energy Research Center®

To understand Florida's position in the development of solar technologies it's necessary to visualize a bigger picture. Currently, the United States spends over $38 billion per year for crude oil and petroleum product imports, whereas appropriations for research and development on solar energy technology total less than $120 million per year.

Not only do we operate within a global economy, we also operate within a global environment. If the greenhouse effect and global climate change force nations to drastically reduce carbon dioxide emissions, there are very few alternatives to fossil fuels for power production. In a world of dwindling energy …

Energy Research Projects, Florida Solar Energy Center, David Lahart

FSEC Energy Research Center®

The Florida Solar Energy Center (FSEC) is a research and education arm of the State University System hosted by the University of Central Florida. The Florida legislature established FSEC in 1974 to conduct research in alternative energy technologies, to ensure the quality of solar energy equipment sold in Florida, and to educate people about renewable energy technology. One method of disseminating research results has been through teacher education programs and the development of instructional materials. FSEC-developed materials are designed to teach science and social studies research methods and for process skills. All units are field-tested and correlated with student performance …

Tracer Gas As A Practical Field Diagnostic Tool For Assessing Duct System Leaks, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

A methodology is presented for using tracer gas testing to detect and quantify duct leakage in homes. Since air is invisible, leakage of air from duct systems often remains undetected. Smoke sticks used in conjunction with blower doors are excellent diagnostic tools for detecting and locating leaks in the air distribution system. The tracer gas tests described are a good complement to these tools in the detection, location, and measurement of duct leakage.

Testing for house infiltration once with the air handler on and again with the air handler off indicates whether duct leaks exist. In many cases, it is …

Test 1630: John Deere 4755 And 4760 Quadrange Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1629: John Deere 4555 And 4560 Quadrange Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Synthesis Of An Efficient Band Mechanism For Robots And Prosthetic Devices, Run Chen Zhou

Mechanical & Aerospace Engineering Theses & Dissertations

A noncircular pulley has been applied to improve the system efficiency of an electrical-powered elbow prosthesis. The dynamics of the motor and the prosthetic arm have been incorporated into the kinematic synthesis relationships for determining the pulley profile that maximizes the efficiency of the elbow prosthesis.

The nonlinear dynamic equations have been solved by the code Differential Equation (DE) while determining the motor power and efficiency which are the criteria in the nonlinear programming problem. The optimal design variables for determining the pulley profile along with some simulation results have been obtained from an optimization program (based on the Generalized …

Application Of Shape Sensitivity Analysis For Computation Of Transient Free-Surface Flows, Frank Nicolas Michel

Mechanical & Aerospace Engineering Theses & Dissertations

Shape sensitivity analysis is introduced into a numerical scheme simulating a transient free-surface flow and applied to the case of a fluid advancing through a bed of cylinders. For this incompressible Newtonian flow, viscous forces are dominant. A penalty function finite element formulation is used to solve the problem. Coordinates of nodes on the moving boundary are chosen as design variables and an analytical formulation of the gradient of the finite element algebraic system, with respect to these variables, is derived.

In a numerical example, the results obtained with and without sensitivity analysis are compared. The efficiency and accuracy of …

Domain Decomposition For Multigrid, Finite Volume Flow Solvers, Victor Robert Lessard

Mechanical & Aerospace Engineering Theses & Dissertations

Computing the flow fields about three-dimensional complex configurations accurately becomes a difficult task, if it is attempted to generate a single, body fitted grid with proper clustering. The domain decomposition methods, which divide the computational domain into less complex subdomains, are extensively used to decrease the grid generation workload. A domain decomposition technique also allows the use of different solution methods for different subdomains. The objective of this work is to develop a domain decomposition method via overlapping/embedding the component grids, which is to be used by upwind, multigrid, finite volume solution algorithms. A computer code, given the name MaGGiE, …

The Effects Of Bending On The Strain Distributions In A Stiffener-Skin Interface Region, Osvaldo F. Lopez

Mechanical & Aerospace Engineering Theses & Dissertations

An analytical and experimental study to assess the effect of bending on the adhesive strain distributions in a stiffener-skin interface region is described. A one-dimensional beam analysis is derived using a variational approach. Parametric studies are conducted to assess the effects of stiffener, skin, and adhesive thickness and adhesive material nonlinearity on the adhesive layer extensional and shear strain distributions subjected to applied bending. Two experimental methods of measuring through-the-thickness extensional strains in an adhesive are investigated. One method involves measuring the changes in the resistance of a composite strain sensor subjected to applied tension and compression loads. The second …

Non-Linear Dynamics And Control For Thermal Room Models, Milind Prabhakar Oak

Mechanical & Aerospace Engineering Theses & Dissertations

Heating, Ventilation and Air Conditioning (HVAC) building operations with emphasis on reduced energy costs and occupant comfort require a dynamic control of short response (minutes) elements of HVAC systems. Hence, it is imperative to acquire better methods of non-linear modeling for prescription of thermal controls which will regulate space conditions over wide parameter ranges without undue cycling or steady state errors. A first step towards this goal is identification and inclusion of short response dynamics elements in the HVAC systems model while retaining essential non-linearities. A single zone environmental chamber is modeled in the heating mode. In the model, …

Comparison Of Digital Controllers Used In Magnetic Suspension And Balance Systems, William Allen Kilgore

Mechanical & Aerospace Engineering Theses & Dissertations

Dynamic systems that were once controlled by analog circuits are now controlled by digital computers. Presented is a comparison of the digital controllers presently used with magnetic suspension and balance systems. The overall response of the systems are compared using a computer simulation of the magnetic suspension and balance system and the digital controllers. The comparisons include responses to both simulated force and position inputs. A preferred digital controller is determined from the simulated responses.