Engineering Commons^™

The Research, Design And Production Of Cortical Bone Pins And Screws For The Fixation Of Broken Bones In The Hand And Wrist, Ronald P. Holland

Opportunities for Undergraduate Research Experience Program (OURE)

Investigators at the University of Missouri at Rolla have entered into a joint venture with surgeons at Saint Louis University Hospital to develop a superior method of fixing broken bones of the human hand and wrist. This method involves the production of pins and screws from human cortical bone which will be used to fix broken bones for healing. The cortical bone fasteners will provide many advantages to the currently used metal fasteners. To date, prototype fasteners have been developed and are pending mechanical testing as a result of this undergraduate research project. Results of this project potentially include a …

Motorized Throttle Plate, John D. Crawford

Opportunities for Undergraduate Research Experience Program (OURE)

The objective of this project was to develop a throttle plate mechanism that can be used to simulate transient engine operation. This throttle plate was designed so as to regulate the quantity of air flow entering a Port Fuel Injected (PFI) spark ignition engine prior to the combustion of the fuel-air mixture. The throttle plate is linked to a data acquisition system in order to study the port fuel injection characteristics of the fuel-air mixture. This data acquisition system links the throttle plate angular position information to data obtained using a nonintrusive laser based diagnostic technique, therefore enabling the study …

Performance Analysis For The Ccn Collection Apparatus, Deborah K. Bircher

Opportunities for Undergraduate Research Experience Program (OURE)

This paper concerns the performance testing of a system to collect and chemically analyze cloud condensation nuclei (CCN). These are the atmospheric particles which nucleate cloud drops.

The air is humidified by passage through the "haze chamber", consisting of parallel vertical plates that are covered with cotton cloth and are kept wet by water supplied at the top edge. The plates are adiabatic , and should equilibrate in temperature at the wet bulb temperature of the incoming air. Measurements of the plate temperature with eighty thermocouples indicate behavior consistent with theory.

Another part of the system is called the CFD …

Two Methods For Attenuation Of Vibration In Structures, Kevin Mark Mcclendon

Opportunities for Undergraduate Research Experience Program (OURE)

The purpose of this report is to discuss methods of suppressing vibration in space trusses. The discussion is centered on the approach, structural attributes, and effectiveness of each method. One approach uses structural active members which are actuated to produce “anti-vibration” to cancel vibrations in the truss. The other method is to implement passive and active damping devices at the base of the space truss, where it will absorb vibrations by fluctuating the stiffness of the structures foundation.

Damage Assessment Of Composite Structures With Embedded Optical Fibers, Peter E. Hackett

Opportunities for Undergraduate Research Experience Program (OURE)

One of the important features of smart composite structures is their capability to observe their own performance for proper functioning and self-diagnostic purposes. The low velocity impact damage of composite structures (matrix cracking, fiber breakage, delamination, etc.) is often difficult to detect visually and can significantly reduce the strength of the structure. The objective of this research is to develop a technique for fabricating composite laminates that will facilitate the embedment of optical fibers. Composite test specimens will be fabricated in the composite material laboratory. The fabrication of composite laminates with a health monitoring and damage assessment system capable of …

Active Buckling Control Of Composite Plates, Bradley Wayne Gentelin

Opportunities for Undergraduate Research Experience Program (OURE)

The objective of the research project is to investigate the feasibility of using the rapidly growing technology of smart materials in actively controlling the buckling of laminated composite plates. Advanced composite structures are susceptible to structural instabilities under compression loadings, and the proper control of such instabilities is essential to the effective performance of the structures. The focus of the research activity is to perform an experimental study of using embedded piezoelectric materials for enhancing the critical buckling loads of laminated composite plates. The forces induced by the piezoelectric actuators under the applied voltage fields will be used to counterbalance …

Catalysis Of Charcoal Emissions, James M. Horak

Opportunities for Undergraduate Research Experience Program (OURE)

This paper is about the development of a system to reduce the emissions of charcoal kilns with the catalyst from automotive catalytic converters. This device, called the charcoal kiln emissions oxidizer (CKEO), was designed and fabricated to meet the goal of a cost effective means to reduce the carbon monoxide and hydrocarbon emissions from charcoal kilns. Testing of the CKEO was never carried out as a test site could not be secured by this writing. The need for the CKEO, the theory behind it, and a procedure to test it are presented.

Cause And Effect Diagrams For Process Analysis And Control, Philip Thomas

Theses

Cause and effect diagrams can be used as an effective tool for identifying the possible causes of a quality problem. Using this diagram one can go deep into the causes of the problem and take proper remedial action. Several graphical techniques like matrix diagrams, systematic diagrams, etc., can be combined with this tool to better represent the cause effect relationships. While a quantitative approach of this technique is feasible but limited, there are useful applications based on qualitative approach to this technique. The objective of this thesis is to propose a quantitative approach to the cause and effect diagrams especially …

Selecting Windows For South Florida Residences, Florida Solar Energy Center, Ross Mccluney

FSEC Energy Research Center®

To provide some guidance to the victims of hurricane Andrew in Dade County, we performed a study of various types of modern glazing systems that might be incorporated in windows for south Florida residences.

The dominant energy impact of residential windows in south Florida comes from the solar radiant heat gain entering these windows and the corresponding heat loads on cooling systems. Thus any extra dollars spent by homeowners to purchase improved replacement windows should be spent in lowering the solar gains of the windows purchased (by reducing glazing shading coefficients or by adding exterior shading devices or vegetation) rather …

Preliminary Outline For Preservation Of Tractor Test Building, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Outline of preliminary plan for the Preservation of the Tractor Test Building and early test equipment as monument to early days of the modern power farming industry.

Minutes Of Ag Tractor Test And Power Museum January 12th, 1993, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

No abstract provided.

Low Gravity Environment On-Board Columbia During Sts-40, M. J.B. Rogers, C. R. Baugher, R. C. Blanchard, R. Delombard, William W. Durgin, D. H. Matthiesen, W. Neupert, P. Roussel

Office of the Provost Scholarship

The first NASA Spacelab Life Sciences mission (SLS-1) flew 5 June to 14 June 1991 on the orbiter Columbia (STS-40). The purpose of the mission was to investigate the human body's adaptation to the low gravity conditions of space flight and the body's readjustment after the mission to the 1 g environment of earth. In addition to the life sciences experiments manifested for the Spacelab module, a variety of experiments in other scientific disciplines flew in the Spacelab and in Get Away Special (GAS) Canisters on the GAS Bridge Assembly. Several principal investigators designed and flew specialized accelerometer systems to …

A Comparison Of Low-Gravity Measurements On-Board Columbia During Sts-40, M. J.B. Rogers, C. R. Baugher, R. C. Blanchard, R. Delombard, William W. Durgin, D. H. Matthiesen, W. Neupert, P. Roussel

Office of the Provost Scholarship

The first NASA Spacelab Life Sciences mission (SLS-1) flew 5 June to 14 June 1991 on the orbiter Columbia (STS-40). The purpose of the mission was to investigate the human body's adaptation to the low-gravity conditions of space flight and the body's readjustment after the mission to the 1 g environment of earth. In addition to the life sciences experiments manifested for the Spacelab module, a variety of experiments in other scientific disciplines flew in the Spacelab and in Get Away Special (GAS) Canisters on the GAS Bridge Assembly. Several principal investigators designed and flew specialized accelerometer systems to better …

Outline For Tractor Testing Farm Machinery Museum, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

General statement for developing a museum, justification, current groups, building considerations, and tractor test museum committee

Tractors Acquired For A Museum, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Report mentioning major developments illustracted on tractor acquired for a museum.

Soil Sampling Made Easier, Mike Bolland, Mike Baker

Journal of the Department of Agriculture, Western Australia, Series 4

A new rotary blade soil sampler has taken the hard work out of collecting soil samples from Western Australia's hard-setting soils to test for soil phosphorus levels .

Conceived and developed by Department of Agriculture technical officer Mike Baker, it should enable soil testing to be more widely adopted. Fortunately, the soil calibration tests that were developed using pogo samples can also be used for the new sampler.

Test 1667: John Deere 7700 Powershift Diesel 19-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Analytical Guidance Laws And Integrated Guidance/Autopilot For Homing Missiles, S. N. Balakrishnan, Donald T. Stansbery, J. H. Evers, J. R. Cloutier

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An approach to integrated guidance/autopilot design is considered in this study. It consists of two parts: 1) recognizing the importance of polar coordinates to describe the end game in terms of problem description and measurement acquisition, the terminal guidance problem is formulated in terms of polar coordinates; 2a) through the use of the state transition matrix of the intercept dynamics, a closed form solution for the transverse command acceleration is obtained; and 2b) through a commonly used approximation on time-to-go and a coordinate transformation, a family of proportional navigation optimal guidance laws is obtained in a closed form. A typical …

Test 1497/3: Same Argon 50 Vdt/Agco Allis 5650 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1501/3: Same Argon 60 Vdt/Agco Allis 5660 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary: S172 Massey Ferguson 3120t, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S142 Case-Ih 5220, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S143 Case-Ih 5230, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S144 Case-Ih 5240, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S299 Agco Allis 5660, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S298 Agco Allis 5650, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1670: John Deere 8570 Powersync Diesel 12 And 24 Speeds, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

On Minimizing Thermal Deflections Of Laminated Plates, Serge Abrate

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Thermal deflections of symmetrically laminated plates that are continuous over many line supports are determined using the Rayleigh-Ritz method. The constitutive equations and the thermal loads are expressed in terms of four non-dimensional lamination parameters. Layups that minimize thermal deflections are determined for several types of composite plates subjected to temperature increases that vary linearly through the thickness.

Computer Simulation Of Three-Dimensional Mechanical Assemblies: Part I - General Formulation, Yong Fang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In Part I of this paper, a dynamic modeling system for the simulation of three-dimensional mechanical assemblies is presented. With this simulation tool, a designer can interactively create an assembly of mechanical components ready for dynamic analysis. The modeling system presented in this paper include» the derivation of the equations of motion of spatial multi-body systems, and the formulation of the equations to model the associated collision detection and collision responses. Part II of this paper is to introduce the geometry modeling and computer simulation of 3D systems.

A Magnetic Suspension System With A Large Angular Range, Colin P. Britcher, Mehran Ghofrani

Mechanical & Aerospace Engineering Faculty Publications

In order to explore and develop technology required for the magnetic suspension of objects over large ranges of orientation, a small-scale laboratory system, the large-angle magnetic suspension test fixture (LAMSTF) has been constructed at NASA Langley Research Center. This apparatus falls into the category of large-gap, actively stabilized magnetic levitation systems. The hardware comprises five conventional electromagnets in a circular arrangement, each driven from a separate bipolar power amplifier. Electromagnet currents are commanded by a digital control system, implemented on a microcomputer, which in turn derives the position and attitude of the suspended element from an infrared optical system. The …