Engineering Commons^™

Preparation And Capacitive Property Of Two-Dimensional Multilayer Ti3C2TX-Mxene/Ppy-Nw Composite Material, Lu Chen, Xuan Jian, Min He, Mi-Mi Zhang, Xiao-Die Chen, Lou-Jun Gao, Zhen-Hai Liang

Journal of Electrochemistry

In this paper, the two-dimensional multilayered Ti₃C₂T_x-MXene was obtained by hydrofluoric acid etching method on the bulk phase material MAX(Ti₃AlC₂) substrate. The two-dimensional multilayered Ti₃C₂T_x-MXene/PPy-NW composite electrode materials were successfully prepared by combining the one-dimensional polypyrrole nanowires (PPy-NW) with two-dimensional multilayered Ti₃C₂T_x-MXene. The morphologies and compositions of the synthetic materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Electrochemical tests showed that Ti₃C_{2 …}

Preliminary Automated Determination Of Edibility Of Alternative Foods: Non-Targeted Screening For Toxins In Red Maple Leaf Concentrate, Joshua M. Pearce, Maryam Khaksari, David C. Denkenberger

Michigan Tech Publications, Part 1

Alternative food supplies could maintain humanity despite sun-blocking global catastrophic risks (GCRs) that eliminate conventional agriculture. A promising alternative food is making leaf concentrate. However, the edibility of tree leaves is largely uncertain. To overcome this challenge, this study provides the methods for obtaining rapid toxics screening of common leaf concentrates. The investigation begins with a non-targeted approach using an ultra-high-resolution hybrid ion trap orbitrap mass spectrometer with electrospray ionization (ESI) coupled to an ultra-high pressure two-dimensional liquid chromatograph system on the most common North American leaf: the red maple. Identified chemicals from this non-targeted approach are then cross-referenced with …

A New Pedot Synthesis Method And Its Application In Energy Storage, Haozhe Chen

McKelvey School of Engineering Graduate Student Theses & Dissertations

Conducting polymer is a common electrode material in supercapacitors, people usually create nano-structure on electrode surface to enhance the performance of supercapacitors. Synthetic nanostructured polymers have been implemented in many ways, most of them are template-based synthesis, which is time consuming and expensive, people are pursuing an easier way to synthesize nanostructured conducting polymers. Combining ferric chloride solution hydrolysis and EDOT polymerization to get PEDOT nano fiber in one step has been achieved. We develop a new method to synthesis PEDOT nano fiber from solid-state iron in one step. Our process takes place in a single step inside a sealed …

Method And Apparatus For Fabricating Ceramic And Metal Components Via Additive Manufacturing With Uniform Layered Radiation Drying, Ming-Chuan Leu, Amir Ghazanfari, Wenbin Li, Greg Hilmas, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A freeform extrusion fabrication process for producing three - dimensional ceramic, metal and functionally gradient composite objects, including the steps of filling a plurality of paste sources with a respective plurality of aqueous paste compositions, operationally connecting respective syringes containing respective aqueous paste compositions to a mix ing chamber, moving a first aqueous paste composition from a first respective paste source into the mixing chamber, moving a second aqueous paste composition from a second respective paste source into the mixing chamber, mixing the first and second aqueous paste compositions to define a first admixture having a first admixture composition, extruding …

The Influence Of Complex Thermal Treatment On Mechanical Properties Of Amorphous Materials, Nikolai V. Priezjev, Qing-Long Liu

Mechanical and Materials Engineering Faculty Publications

We study the effect of periodic, spatially uniform temperature variation on mechanical properties and structural relaxation of amorphous alloys using molecular dynamics simulations. The disordered material is modeled via a non-additive binary mixture, which is annealed from the liquid to the glassy state with various cooling rates and then either aged at constant temperature or subjected to thermal treatment. We found that in comparison to aged samples, thermal cycling with respect to a reference temperature of approximately half the glass transition temperature leads to more relaxed states with lower levels of potential energy. The largest energy decrease was observed for …

Modeling And Experimental Determination Of Physical Properties Of Ge X -Ga Y -Se 1-X-Y Chalcogenide Glasses I: Structure And Mechanical Properties, Jason Lonergan, Charmayne Lonergan, John Mccloy, Kathleen A. Richardson

Materials Science and Engineering Faculty Research & Creative Works

A series of ten Ge_xGa_ySe_1-x-y glasses within the topological constraint regime of = 2.3 to 2.8 were processed for physical property testing to compare measured to calculated property values enabling further understanding of structure-related mechanical property evolution. Average bond energies were calculated for each glass to elucidate structure and property relationships. Raman analysis was performed to correlate the topological constraint theory to experimentally determined structural units. Young's modulus and Vickers hardness, respectively, were shown to increase with increasing coordination number from 14.42 GPa and 911 MPa at = 2.4 to 29.44 GPa and 2295 MPa …

Iron-Containing Nanoparticles For The Treatment Of Chrionic Biofilm Infections In Cystic Fibrosis, Leisha M. A. Martin

Nanoscience and Microsystems ETDs

Cystic fibrosis (CF) is the most common genetic disease resulting in the morbidity and mortality of Caucasian children and adults worldwide. Due to a genetic mutation resulting in malfunction of the Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) protein, CF patients produce highly viscous mucus in their respiratory tract. This leads to impairment of the mucociliary clearance of inhaled microbes. In addition to reduced microbial clearance, anoxic environmental conditions in the lungs promote biofilm-mode growth of the pathogenic bacterial species Pseudomonas aeruginosa. Chronic infections of P. aeruginosa begin in early childhood and typically persist until respiratory failure and death result. The …

Machine Learning Applications In Computer Integrated Material Design And Modeling, Joseph O. Oyedele

Mechanical Engineering Theses

This research seeks to develop and test a framework for considering Inductive Hierarchical Analysis (IHA) using Machine Learning (ML) technique in a multistage material design of a gear manufacturing process. A ML model was developed, which implements Random Forest (RF) regression algorithm together with analysis of variance (ANOVA) approach for mapping sets of material and product design variables, thus classifying the design space into feasible and non-feasible solution space. This approach is applied to the design of steel gear within specified performance requirements by exploring the design space for the Process-Structure-Property-Performance (PSPP) relation in the hot rolling process. With an …

Rheo-Physical Characterization Of Microstructure And Flow Behavior Of Concentrated Surfactant Solutions, Eduard Caicedo Casso, Jason E Bice, Lisa R. Nielsen, Jessica L Sargent, Seth Lindberg, Kendra Erk

School of Materials Engineering Faculty Publications

Processing-relevant relationships between the microstructure and flow behavior of concentrated surfactant solutions were determined by a combination of basic rheological experiments, rheo-flow velocimetry tests, and flow birefringence measurements. The most common surfactant microstructures found in liquid soaps and other consumer care products—spherical, worm-like, and hexagonally packed micelles and lamellar structures—were recreated by varying the concentration of sodium laureth sulfate in water from 20 to 70 wt% and adding salt in some cases. It was found that common features of flow curves, such as power-law shear thinning behavior, resulted from a wide variety of material responses including shear-induced wall slip in …

Structural Health Monitoring Of Fiber-Reinforced Composite Using Wireless Magnetostrictive Sensors, Sujjatul Islam, Relebohile George Qhobosheane, Muthu Ram Prabhu Elenchezhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider

Institute of Predictive Performance Methodologies (IPPM-UTARI)-Archive

Composite materials are extending the horizons of designers in all branches of engineering. These materials have numerous advantages and improved structural properties such as high strength to weight ratio, high stiffness to weight ratio, lightweight, structural strength, and excellent durability. This has led to their use in several applications i.e. automobile, aircraft, and military defense devices. However, these materials experience various types of deformations and damage modes during their service life that are at times challenging to detect. This has led to the development of various non-destructive methods for structural health monitoring (SHM) of the damages in these complex material …

Formability Of A Hsas Based On Hot Processing Maps And Texture Analyses, Zhiqiang Yang, Ligang Liu, Tongguang Zhai, Chunmei Zhao, Hui Yu, Qiang Li

Chemical and Materials Engineering Faculty Publications

Aiming to improve the formability of a HSAS Docol 1500 Bor, hot processing maps were obtained based on Prasad, Babu and Murty instability criteria. The hot processing maps based on the above instability criteria are similar and the explanation of its similarity is given. Recrystallization and misorientation in typical quenched specimens were observed by using SEM with a EBSD system. It was found that the fraction values of HAGBs in quenched martensite are all below 0.4 under experimental conditions. Flow location bands occurs at lower deformation temperatures and higher strain rates. The textures in martensite mainly include ⟨110⟩ / / …

X-Ray Determination Of Compressive Residual Stresses In Spring Steel Generated By High-Speed Water Quenching, Diego E. Lozano, George E. Totten, Yaneth Bedolla-Gil, Martha Guerrero-Mata, Marcel Carpio, Gabriela M. Martinez-Cazares

Mechanical and Materials Engineering Faculty Publications and Presentations

Automotive components manufacturers use the 5160 steel in leaf and coil springs. The industrial heat treatment process consists in austenitizing followed by the oil quenching and tempering process. Typically, compressive residual stresses are induced by shot peening on the surface of automotive springs to bestow compressive residual stresses that improve the fatigue resistance and increase the service life of the parts after heat treatment. In this work, a high-speed quenching was used to achieve compressive residual stresses on the surface of AISI/SAE 5160 steel samples by producing high thermal gradients and interrupting the cooling in order to generate a case-core …

Electrically Conductive Concrete Mix For Electromagnetic (Em) Ground Plane, Christopher Tuan, Lim Nguyen

Department of Civil and Environmental Engineering: Faculty Publications

Conductive concrete mixtures are described that are configured to reflect, for instance, EM waves propagating from an EM pulser onto the conductive concrete mixture forming a ground plane, rather than absorb or dissipate the electromagnetic energy. The conductive concrete mixtures include cement, aggregate, water, metallic conductive material, and conductive carbon particles.

Phase Evolution And Dynamic Behavior In Materials With Noncollinear Spin Textures, Eleanor M. Clements

USF Tampa Graduate Theses and Dissertations

Noncentrosymmetric magnetic materials have gained special attention due to their ability to stabilize topologically nontrivial magnetic states via the competition between symmetric exchange and the antisymmetric Dzyaloshinskii-Moriya (DM) interaction. The spin struc- tures in these materials have become a center of interest for spintronics applications due to their stable, particle-like properties, and high degree of tunability via control of external parameters, such as magnetic and/or electric field and temperature. Understanding how these robust magnetic structures stabilize, evolve, dynamically respond, and adhere to existing models, all in the presence of external stimuli, are topics of fundamental interest. In this dissertation, the …

Surface-Controlled Dissolution Rates: A Case Study Of Nanoceria In Carboxylic Acid Solutions, Eric A. Grulke, Matthew J. Beck, Robert A. Yokel, Jason M. Unrine, Uschi M. Graham, Matthew L. Hancock

Chemical and Materials Engineering Faculty Publications

Nanoparticle dissolution in local milieu can affect their ecotoxicity and therapeutic applications. For example, carboxylic acid release from plant roots can solubilize nanoceria in the rhizosphere, affecting cerium uptake in plants. Nanoparticle dispersions were dialyzed against ten carboxylic acid solutions for up to 30 weeks; the membrane passed cerium-ligand complexes but not nanoceria. Dispersion and solution samples were analyzed for cerium by inductively coupled plasma mass spectrometry (ICP-MS). Particle size and shape distributions were measured by transmission electron microscopy (TEM). Nanoceria dissolved in all carboxylic acid solutions, leading to cascades of progressively smaller nanoparticles and producing soluble products. The dissolution …

Synthesis And Characterization Of Molybdenum Disulfide/Conducting Polymer Nanocomposite Materials For Supercapacitor Applications, Turki S. Alamro

USF Tampa Graduate Theses and Dissertations

The needs for energy storage devices have kindled researchers desire to explore and synthesize nanocomposite materials. Storing energy efficiently, effectively and sustainably are the science and engineering communities’ highest priorities to develop electrochemical energy storage devices. Supercapacitors have become power solution not only because supercapacitors can bridge the gap between the traditional capacitors and rechargeable batteries but also because of many other advantages which include extraordinary electrochemical properties, wide working-temperature range, cost effective, safe operation and long/stable cycle life. They have higher current pules than batteries due to the mechanism of charging and discharging. Batteries charging and discharging via chemical …

Comparison Of Organic Food Packaging In Denmark, Finland, Germany, Great Britain And Italy, Sara Paunonen, Marja Pitkänen, Mika Vähä-Nissi, Ville Leminen, Mika Kainusalmi

Journal of Applied Packaging Research

The objective of this study was to provide a snapshot of organic food assortments in supermarkets in Denmark, Finland, Germany, Great Britain, and Italy, and compare the packages used for five organic food products (eggs, meat, fish, mushrooms, berries). In addition, a comparison was made between packaging for regular and organic whole eggs. The highest number of organic products was found in the Danish supermarket. The main difference between the countries was in the use of national organic logos. Of the different food products, egg cartons had the most variation in materials and visual design. In all countries the product …

Green Synthesis Nanocomposite Membranes, Dibakar Bhattacharyya, Vasile Smuleac, Rajender S. Varma, Subhas K. Sikdar

Chemical and Materials Engineering Faculty Patents

A nanocomposite membrane includes a macroporous polymer membrane having a plurality of pores. A plurality of metal nanoparticles are synthesized and immobilized within those plurality of pores. The nanoparticles are reduced and capped with a green reducing and capping agent such as green tea extract.

Influence Of Sonication Parameters On The Morphology Of Nanocellulose Aerogels, Dexter Cox, Tim Kidd

Research in the Capitol

Nanocellulose is a renewable and biocompatible material that has a tensile strength similar to aluminum, is stiffer than Kevlar, and has a strength to weight ratio eight times that of stainless steel. There has been a range of studies on nanocellulose materials for potential use as a low-calorie food substitute, biomedical wound dressings, and as a structural component for buildings. Throughout this research experiment, nanocellulose aerogels of different mass compositions were created through a mechanical process using an ultrasonic processor with a titanium probe attachment. The purpose of this study was to develop a method that reduces the amount titanium …

Comparison Of Bioplastics With Conventional Thermoplastics For Consumer Applications, Alec Jones, Shelby Bicknell, Luke Gordon, Justin Mamerow, Jeanne H. Norton

Posters

Controversy surrounds the use of plastic products, primarily due to their impact on the environment. Fortunately, bio-based plastics offers a solution by using sustainable resources as starting materials. Our team addressed the task of processing and conducting research on various bio-based plastics that were supplied by an industrial part­ner and comparing the bio-based plastics to control materials from petrochemical sources. Overall, the goal was to determine which bio-based resin would be the most suitable for use in consumer packaging products. Thermal, mechanical, and chemical properties were analyzed. The control resins used were: Formolene 2610A PP, Ineos Olefins & Polymers PP, …

Analytical And Experimental Study Of Laser Cladding Of Ni/Wc Metal Matrix Powders Reinforced With Rare Earth Elements Using A High Power Direct Diode Laser, Mohammed Sayeed

Mechanical Engineering Research Theses and Dissertations

The corrosion and wear are major limiting factors for steel in the harsh environments and can be controlled by depositing protective passive coatings. Nickel based alloy cladding of steel offers a solution by enabling better corrosion and wear resistance, and high bonding strength. The laser surface cladding of steel was conducted using a high power direct diode laser. Layers of tungsten carbide in Ni (40%Ni-60%WC) combined with 1% and 2% Lanthanum Oxide (La₂O₃) and Cerium Oxide (CeO₂) were deposited on ASTM A36 steel substrate. The X-ray diffraction and scanning electron microscopy were employed to …

Molecularly Conductive Behavior Of Blended Polymer Electrolyte-Based Cmc/Pva, Noor Saadiah Mohd Ali, Dishen Zhang, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

This study investigated the electrical conduction and structural behavior of blended polymer electrolyte (BPE)-based carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) in the development of solid-state electrochemical devices. Based on impedance spectroscopy and correlating Fourier transform infrared (FTIR) with thermogravimetric analysis, a framework was proposed to explain the structural enhancement of the BPE system. As revealed by FTIR, the optimum conductivity of CMC/PVA BPEs was 9.21 × 10−6 Scm−1 for 80:20 composition attributed to the intermolecular attraction between the polymers. Thermal stability of the CMC/PVA was influenced by the formation of a hydrogen bond between the hydroxyl (-OH), carboxylate (-COO-), …

Multistage Sonication Effect On The Composition And Properties Of Degraded Chitosan Product, Nurul Laili Arifin, Emma Savitri, Anjar Indah, Fesa Putra, Sumarno Sumarno

Makara Journal of Technology

The sonication method randomly breaks polymer chains to produce a varied distribution of products. A scheme with multi-stage sonication steps is proposed to identify oligomers and low molecular weight chitosan based on changes to the degrad-ed product. For each sonication level, 1% (w/v) chitosan in 1% (v/v) aqueous acetic acid was sonicated for 120 min at 60 °C. The products of the sonication treatment were deprotonized by adding an alkali solution, freeze dried and insoluble product re-sonicated until a low molecular weight was produced. Low molecular weight chitosan/insoluble products were character-ized with Fourier-transform infrared spectra (FT-IR) and X-ray diffraction (XRD) …

Study Of Zno Nanospheres Fabricated Via Thermal Evaporation For Solar Cell Application, Fatin Farisha Alia Azmi, Bouchta Sahraoui, Saifful Kamaluddin Muzakir

Makara Journal of Technology

A solar cell is a device that absorbs light energy to generate electrical energy. A typical example of a solar cell is the quantum dot solar cell (QDSC), which consists of three main components: (i) fluorophore: the component that absorbs light and generates excited state electrons and holes, (ii) photoelectrode: the component that transports the excited state electron and prevents recombination of excited state electrons and holes, and (iii) electrolyte: the component that re-plenishes the vacancy left by the excited electron in the hole. Despite the increasing number of research in the QDSC field, to date, a device with significant …

Electrical Properties Of A Novel Solid Biopolymer Electrolyte Based On Algi-Nate Incorporated With Citric Acid, Ahmad Faizrin Ahmad Fuzlin, Noor Syahida Ismail, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

In the present study, a novel solid biopolymer electrolyte (SBE) system is introduced by doping citric acid into alginate polymer. A sample of the alginate-citric acid SBE system was prepared via a solution casting technique. Using electrical impedance spectroscopy (EIS), the electrolytes of alginate-citric acid analyzed from 5 Hz to 1 MHz achieved the highest conductivity at 20 wt.% of 5.49 × 10-7 S cm-1. The temperature dependence of various citric acid amounts obeyed the Arrhenius rule with R2~1, where all SBE systems were thermally activated with increasing temperature. The dielectric studies of the alginate-citric acid SBE system showed non-Debye …

Hydration Of Binary Portland Cement Blends Containing Silica Fume: A Decoupling Method To Estimate Degrees Of Hydration And Pozzolanic Reaction, Wenyu Liao, Xiao Sun, Aditya Kumar, Hongfang Sun, Hongyan Ma

Materials Science and Engineering Faculty Research & Creative Works

Determination of degrees of hydration/reaction of components of blended cementitious systems (i. e., cement and SCMs: supplementary cementitious materials) is essential to estimate the systems' properties. Although the best methods for determining degrees of reaction of different SCMs have been recommended by RILEM TC238, they rely on either expensive equipment (e.g., nuclear magnetic resonance) or time-consuming sample preparation and data processing (e.g., backscattered electron image analysis). Furthermore, these methods cannot simultaneously characterize degree of hydration of cement and degree of reaction of SCMs. A novel decoupling method, which can simultaneously estimate the degree of hydration of cement and the degree …

Plasmonic Metamaterials: Physical Background And Some Technological Applications, Benjamin G. Schmidt

Senior Honors Theses

New technological frontiers appear every year, and few are as intriguing as the field of plasmonic metamaterials (PMMs). These uniquely designed materials use coherent electron oscillations to accomplish an astonishing array of tasks, and they present diverse opportunities in many scientific fields.

This paper consists of an explanation of the scientific background of PMMs and some technological applications of these fascinating materials. The physics section addresses the foundational concepts necessary to understand the operation of PMMs, while the technology section addresses various applications, like precise biological and chemical sensors, cloaking devices for several frequency ranges, nanoscale photovoltaics, experimental optical computing …

The Effects Of Organic And Inorganic Nanoparticles On Bacterial Deactivation, Lauren Cooper

Mahurin Honors College Capstone Experience/Thesis Projects

Antibacterial resistance is one of the greatest problems in modern medicine, as healthcare professionals are experiencing more and more difficulty in providing effective care. As such, alternative methods of treatment are needed in order to overcome this issue. One recently proposed method of alternative treatment is photodynamic therapy. Photodynamic therapy is a light-based method of treatment that utilizes (1) a photosensitizing agent, (2) light, (3) produced oxygen species. When the photosensitizing agent is injected into an infected region of interest and then irradiated with a certain wavelength of light, the agent is photoactivated and begins to produce harmful forms of …

Generation Of Silver Nanoparticle Pharmacokinetic Profiles In A Lung Model, Rachel Galaska

Honors Theses

Nanomaterial technologies are becoming increasingly prevalent in consumer and industrial applications, including drug delivery, energy harvesting, environmental applications, and medicine due to their unique physiochemical properties. As nanomaterial use increases, so too does human exposure. This has made it progressively more important to understand the toxicological effects of nanomaterials and their interactions with the human body. Silver nanoparticles (AgNPs) are one of the most commonly used nanomaterials due to their antibacterial properties. As inhalation is one of the most common exposure routes, understanding the toxicity of these AgNPs on lung tissue was studied. Using A549 cells for a lung tissue …

Effect Of Activated Carbon On The Performance Of A Solar Thermal Adsorptive Refrigerator (Star) Using Activated Carbon-Ethanol, Joshua Romo

Honors Theses

The Solar Thermal Adsorptive Refrigerator (STAR) project at the University of Dayton seeks to bridge sustainability and the need for reliable refrigeration in developing communities. Cost-effective construction, operation, and maintenance as well as the use of a sustainable adsorption pair, activated carbon-ethanol, give STAR great potential in the realm of humanitarian engineering. This project explores the effect of using two activated carbon brands, 8x16 and CocoPlus, on the cyclic performance of the STAR system. Although both brands have similar specifications given by the manufacturer, one (8x16) inhibited successful performance while the other (CocoPlus) enabled it. This project highlights both the …