Engineering Commons^™

Predictive Delivery Man Assignment Problem Using Deep Learning, Rahmadini Payla Juarsa, Taufik Djatna

Makara Journal of Technology

Dispatching is a critical part in current online shopping. It relates to how the delivery man assignment should minimize cost along with the service from a source to an end customer with an appropriate scheduled time. The problem arises as neither enough products to deliver nor delivery men are available for dispatch, resulting in suboptimal service and a waste of money. The study aimed to formulate the cost of restaurant dispatching for inducing a deep learning-based solution with the gated recurrent unit recurrent neural network to receive hourly order data and to engage the result for near feature delivery man …

Amorphous Silica Based Biomaterials For Musculoskeletal Tissue Regeneration Applications, Kamal Awad

Material Science and Engineering Dissertations - Archive

Musculoskeletal (MSK) injury includes any injuries that affect the bones, muscles, ligaments, tendons, or nerves. Open bone fracture is one of the common types of MSK traumatic injuries which results in not only bone fracture but also damage/loss of associated muscles, nerve, vasculature, endothelium, periosteum, fascia, and connective tissue. Surgical procedures and biological interventions are required to fix the broken bone, and muscle transfer is performed to compensate the skeletal muscle defects. Current treatments include fixative metal implants and regenerative biopolymer scaffolds, then muscle flap procedures to cover the bone. Yet, these treatments are inadequate because the used materials do …

Surface Modification Of Titanium By Electrolytic Plasma Processing And In-Vitro Studies, Wisanu Boonrawd

Material Science and Engineering Dissertations - Archive

Electrolytic plasma processing (EPP) can be operated in two modes, namely plasma electrolytic saturation (PES) and plasma electrolytic oxidation (PEO). In this study, the PES was used to create hydrophilic surface profiles on titanium (Ti). The wettability, surface morphology characteristics and chemical composition of the treated samples were studied as a function of PES processing parameters. The PES profiled surfaces comprised of a characteristic “hills and valleys” morphology because of continuous surface melting and freezing cycles. A bimodal surface profile was produced with 2-3 µm height hills and valleys with nano-roughness (= 200 nm). The produced profile resulted in a …

Rapid Annealing Of Perovskite Solar Cell Thin Film Materials Through Intense Pulse Light., Amir Hossein Ghahremani

Electronic Theses and Dissertations

Perovskite solar cells (PSCs) have garnered a great attention due to their rapid efficiency improvement using cheap and solution processable materials that can be adapted for scalable high-speed automated manufacturing. Thin film perovskite photovoltaics (PVs) are typically fabricated in an inert environment, such as nitrogen glovebox, through a set of deposition and annealing steps, each playing a significant role on the power conversion efficiency (PCE), reproducibility, and stability of devices. However, atmospheric processing of PSCs would achieve lucrative commercialization. Therefore, it is necessary to utilize materials and methods that enable successful fabrication of efficient PSCs in the ambient environment. The …

Development Of Eam And Rf-Meam Interatomic Potential For Zirconium Diboride, Bikash Timalsina

Graduate Theses/Dissertations

Embedded Atom Method (EAM) and Modified-EAM (MEAM) interatomic potentials were developed for zirconium diboride (ZrB₂). The EAM and “Reference Free” (RF) version of the Modified Embedded Atom Method (RFMEAM) potentials have been fitted by utilizing Density Functional Theory (DFT)-based datasets including lattice deformations and high-temperature ab-initio molecular dynamics (AIMD) simulation results. The occupancies of phonons for acoustic phonon modes from the density functional theory calculation shows that these modes of vibration, mostly due to heavier mass element (Zr), which occur below 8.711 THz, while a slight underestimation to that of DFT calculation predicted by EAM below 8.439 THz …

Durability And Damage Analysis Of Hybrid Multiscale Composites, Suma Ayyagari

Doctoral Dissertations and Master's Theses

In this dissertation, an effort was carried out to enhance the mechanical performance of fiber reinforced composites (FRPs) by modification of the fibers’ surface morphologies. The effects of various surface alterations of a plain-woven carbon fiber fabric surface, on the fiber/epoxy interface were investigated. The alterations were mostly achieved by growing different nanofillers like zinc oxide nanorods (ZnO NR), carbon nanotubes (CNTs), and metal organic frameworks (MOFs) on the fiber surface. While the growth techniques for ZnO NR and CNTs place restrictions on the size of the fabricated composites, MOFs route is uniform, affordable, and can be readily scaled up …

Application Of In Situ And Ex Situ Characterization Of Atomic Layer Deposition Processes For Gallium Phosphide And Sodium Fluoride, Sara Rose Kuraitis

Boise State University Theses and Dissertations

Atomic layer deposition (ALD) is a vapor deposition technique for synthesizing thin films with nanometer thickness control. ALD films are deposited on a substrate surface in a cyclic layer-by-layer fashion utilizing alternating doses of highly reactive chemical precursors. Precursors are selected to undergo self-limiting chemical reactions with the surface, and desired film thickness is achieved by varying the number of ALD cycles accordingly. Optimization of ALD process parameters and precursor chemistry enables conformal coating of arbitrary substrate geometries, including high aspect ratio features such as trenches. In the decades since its introduction, ALD has been used for applications across many …

Mixed Metal Oxide Nanowires Via Solid State Alloying., Veerendra Atla

Electronic Theses and Dissertations

Mixed metal oxide materials with composition control find applications in energy conversion and storage processes such as heterogenous catalysis, photoelectrochemical catalysis, electrocatalysis, thermal catalysis, and lithium-ion batteries. Mixed metal oxides and/or complex oxides with composition control and in one-dimensional form as nanowires could be interesting to various catalysis applications due to control on single crystal surfaces, active sites, acidity versus basicity site density, and oxygen vacancies. The major challenge is to synthesize mixed metal oxide nanowires beyond binary oxides with composition control. In this dissertation, solid state alloying of binary oxide nanowires with solid and liquid precursors is studied to …

Computational Modeling Towards Accelerating Accident Tolerant Fuel Concepts And Determining In-Pile Fuel Behavior, Ember Sikorski

Boise State University Theses and Dissertations

To mitigate global warming, we need to develop carbon-free ways to generate power. Nuclear energy currently generates more carbon-free power in the United States than all other sources combined at 55%. To make nuclear as viable a power source as possible, we need to maximize power density and safety. Both of these can be improved with Accident Tolerant Fuel (ATF) materials. Uranium nitride (UN), a candidate ATF material, offers high fuel economy due to its uranium density and improved safety margins from thermal properties. However, its instability in the presence of water, a reactor coolant, must be addressed. This dissertation …

Microstructure And Microchemistry Of Laser Welds Of Irradiated Austenitic Steels, Yaqiao Wu, Megha Dubey

Materials Science and Engineering Faculty Publications and Presentations

This article investigates the integrity of laser welds on neutron irradiated, He-containing steels. Life extension of the current fleet of light water reactors could necessitate repair of cracks on irreplaceable internal components, but heat input of weld repairs exacerbates the problem by initiating He-induced cracking. Laser welding is a promising low-heat-input technology thought to limit the extent of He-induced cracking. In this study, we produce laser welds in a hot cell on AISI 304L stainless steel plates previously irradiated in the Experimental Breeder Reactor (EBR)-II. We select a systematic set of three specimens spanning fluences ~1–28 displacements per atom (dpa) …

Toward An Understanding Of Fundamental Mechanisms In Transitional And Turbulence Flow Control, Ethan A. Davis

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Turbulence is an emergent phenomenon found throughout nature and engineering, alike. It plays a vital role in the aquatic locomotion of organisms, scalar mixing, fluid transport, shipping and transportation, and even the flow of biological fluids in the human body. Therefore, it is of utmost importance in both a practical and engineering sense to better understand turbulence with the goal of better controlling it. This dissertation focuses broadly on better understanding the underlying mechanisms behind wall-bounded turbulent flows, with an emphasis on exploiting those mechanisms for turbulence flow control.

We developed a numerical simulation to study the effect of slip …

Development Of A Mash Tl-3 Compliant Parapet Mounted Fence, Luis Rodriguez Alvizo

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

When roadways pass over railway tracks, there is a risk that debris from the roadway or pedestrians may fall onto the tracks and interfere with railway operations. Because of this, state Departments of Transportation (DOTs) commonly install debris fences in conjunction with bridge rails over railway tracks. However, the safety performance of debris fence systems when impacted by an errant vehicle has not been demonstrated through full-scale crash testing. Thus, the objective of this research was to develop a new, parapet-mounted debris fence for the Iowa DOT according to safety performance guidelines included in the American Association of State Highway …

Camshaft Failure Simulation With Static Structural Approach, Riduwan Prasetya, Andoko Andoko, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

A failure happens within the camshaft of the minibus when the vehicle is in utilize. The camshaft was a fracture within the bearing between the primary cylinder exhaust valve and the second cylinder suction. This simulation aims to find the causes of camshaft failure utilizing the finite element method with a static structural approach, including simulations of deformation, strain, stress, fatigue life (stress-life and strainlife), and cracks. The method used in this paper is the finite element method with a static structural approach by ANSYS software. The camshaft material is a gray cast iron designed using Solidworks. Pre-processing includes meshing …

Electrochemical Corrosion Properties Of Ternary Al And Quaternary Zr Added Bell Metal In 0.1m Nacl Solution, Sakib Al Razi Khan, Mohammad Ashfaq Hossain, Maglub Al Nur, Mohammad Salim Kaiser

Journal of Mechanical Engineering Science and Technology (JMEST)

The electrochemical corrosion property of ternary Al and quaternary Zr added Bell metal in 0.1M Sodium Chloride solution has been experimentally conducted at room temperature. Electrochemical impedance spectroscopy (EIS) method and Potentiodynamic polarization technique are used to carry out the electrochemical investigation. Microhardness test is also conducted for all three alloys and it reveals that Al addition increases the hardness of bell metal due to the formation of different intermetallic precipitates of Cu and Al. Optical Micrograph as well as Scanning Electron Micrograph have also been studied to characterize their surface condition. It is found that Zr addition refines the …

Evaluating Storage And Effective Moduli Of In Situ Polymerised And Melt Extruded Pa6 Graphite (G) Composites, Muneer Umar, Michael Ikpi Ofem, Auwal Sani Anwar, Muhammad Murtala Usman

Journal of Mechanical Engineering Science and Technology (JMEST)

Four PA6/graphite (G) composites systems were made. Two using in situ polymerisation equivalent in mixing strain and two systems melt extrusion of equivalent processing strain. The effective modulus of the carbons, room temperature storage modulus and storage modulus at 80 ⁰C were evaluated. The composite/unfilled PA6 ratios at E25 and that at E80 for the in situ polymerised system IG 40/10 are 1.37 and 1.63, respectively. For the in situ polymerised system IG 20/20, the same were 1.96 and 2.28, respectively. For the melt-extruded systems, G 100/6 had the best E25 ratio of 1.67 and E80 of 2.03, whereas the …

The Effect Of Thickness And Type Of Material On The Sheared Edge Characteristics Of Keychain Cranioplasty Plate Blanking Product Using Eccentric Press Machine, Didin Zakariya Lubis, Lea Rachmat Indrasepta, Redyarsa Dharma Bintara, Rizky Ramadhan, Agung Budi Darmawan

Journal of Mechanical Engineering Science and Technology (JMEST)

Keychain cranioplasty plate product has the potential to be produced using the blanking process because it is faster, low-cost, and requires low-energy consumption compared to other mechanical operations. This research aimed to find the effect of material thickness and type on the sheared edge characteristics of keychain cranioplasty plate using the blanking process to meet the international health standard. Experimental research conducted using an eccentric press machine with 40 tons capacity. This research’s test material parameters of titanium (Ti-6AL-4V) and stainless steel (SS-316L) were the 0.5 mm, 0.6 mm, and 0.8 mm thickness with a maximum blanking velocity of 3000 …

Effect Of Dcrp And Dcsp Polarity On The Depth Of Penetration Of Smaw On Low Carbon Steel Astm A36 Using E7018 Electrode, Ma'mun Hidayat, Helleni Febnesia, Sulaeman Deni Ramdani

Journal of Mechanical Engineering Science and Technology (JMEST)

The study aims to determine the level of penetration depth using SMAW (Shielded Metal Arc Welding) Process based on the polarity type of DCRP (Direct Current Reverse Polarity) and DCSP (Direct Current Straight Polarity). This research used ASTM A36 low carbon steel plate with thickness of 6 mm and length of 200 mm, Electrode E7018 LB-52-18 ∅ 3.2 mm, and with current parameters of 90 A, 100 A, 110 A, 120 A and 130 A and 70 ° welding arc angle. The method used the experimental research. Data collection techniques applied direct observation techniques and descriptive statistical data analysis techniques. …

The Effect Of Multi-Extrusion Process Of Polylactic Acid On Tensile Strength And Fracture Morphology Of Filament Product, Muhamad Syaifuddin, Heru Suryanto, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Polylactic acid (PLA) is one of the most used materials in FDM 3D Printing. Large-scale consumption of PLA on an industrial scale could cause environmental and efficiency problems. Thus, PLA waste and industry waste need to be recycled to limit excessive waste. This study aimed to investigate the change in mechanical property, morphology, and structure of mechanically recycled PLA. Recycling was performed 12 times using the extrusion process with an extrusion temperature nozzle of 170°C. The SEM, structural analysis, and amorphous-crystalline analysis used XRD. The results showed a gradual decrease of tensile strength from each recycle with a total of …

Fully Coupled Internal Radiative Heat Transfer For The 3d Material Response Of Heat Shield, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin

Mechanical Engineering Faculty Publications

The radiative transfer equation (RTE) is strongly coupled to the material response code KATS. A P-1 approximation model of RTE is used to account for radiation heat transfer within the material. First, the verification of the RTE model is performed by comparing the numerical and analytical solutions. Next, the coupling scheme is validated by comparing the temperature profiles of pure conduction and conduction coupled with radiative emission. The validation study is conducted on Marschall et al. cases (radiant heating, arc-jet heating, and space shuttle entry), 3D Block, 2D IsoQ sample, and Stardust Return Capsule. The validation results agree well for …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Semi Real-Time Detection Of Subsurface Consolidation Defects During Concrete Curing Stage, Chongsheng Cheng, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Subsurface consolidation defect is a common issue in concrete pavement construction, and the hidden defects often require costly repairs after project delivery. Therefore, being able to identify this type of defect during construction will enable contractor to conduct quick repairs to avoid costly post-construction rework. In this paper a semi real-time detection approach using infrared thermography is introduced. The developed approach utilizes the hydration heat during curing time to identify the subsurface voids based on the regional temperature contrast. Experimental studies were conducted using artificial void-defect in different sizes and depths. The thermographic analysis is employed to locate the void-defects …

Reduced-Order Modeling Of Loosening In Bolted Joints And Dynamic Interactions Between Axially Aligned Threaded Joints, Sandro Aldana

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Maintaining effective preload in bolted joints is critical for ensuring long-term performance and safety throughout the operation of any assembled structure. The loosening of bolted joints has been studied since the Industrial Revolution, but modeling approaches have only emerged over the past three decades. Although existing approaches are capable of simulating or predicting loosening in a single joint consisting of a single bolt, they are too computationally expensive to be used to model loosening in large structures consisting of many bolts. The objective of this thesis is to construct and employ a reduced-order modeling (ROM) approach that treats the internal …

Thermal And Mechanical Analysis Of Bombyx Mori Silk Nanofibers, Justin Busnot

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This thesis presents a study on the thermomechanical properties of Bombyx Mori silk nanofibers. These nanofibers were obtained from silkworm cocoons which were degummed to separate the fibroin and the sericin, the two proteins that make up silk. The fibroin was then centrifuged to remove insoluble particles and stored and 4°C before the electrospinning process. A parametric study of the electrospinning process was carried out in order to identify the factors allowing to obtain optimal mechanical properties. The current as well as the flow rate applied, the diameter of the syringe, the distance separating the syringe from collector or even …

High-Throughput Design Of High-Performance Lightweight High-Entropy Alloys, Rui Feng, Chuan Zhang, Michael C. Gao, Zongrui Pei, Fan Zhang, Yan Chen, Dong Ma, Ke An, Jonathan D. Poplawsky, Lizhi Ouyang, Yang Ren, Jeffrey A. Hawk, Michael Widom, Peter K. Liaw

Mathematical Sciences Faculty Research

Developing affordable and light high-temperature materials alternative to Ni-base superalloys has significantly increased the efforts in designing advanced ferritic superalloys. However, currently developed ferritic superalloys still exhibit low high-temperature strengths, which limits their usage. Here we use a CALPHAD-based high-throughput computational method to design light, strong, and low-cost high-entropy alloys for elevated-temperature applications. Through the high-throughput screening, precipitation-strengthened lightweight high-entropy alloys are discovered from thousands of initial compositions, which exhibit enhanced strengths compared to other counterparts at room and elevated temperatures. The experimental and theoretical understanding of both successful and failed cases in their strengthening mechanisms and order-disorder transitions further …

Mechanical Properties And Microstructure Characteristics Of Alloy Parts Produced By Laser Powder Bed Fusion (Lpbf) Method, Hong Yao

LSU Doctoral Dissertations

Additive manufacturing (AM) is a rapid prototyping technology to produce fully functional and complex designing objects. As one of the AM methods, Laser Powder Bed Fusion (LPBF) has gained the most attention from both academic researchers and industrial companies. During the LPBF process, metal powders are applied layer by layer, which can be 20 microns to 50 microns in thickness. After a layer is prepared, a high-power laser, which is commonly controlled by a scanning head, is used to selectively melt the interested area of a 2D geometry which is designed in a computer aided designing software. LPBF method can …

Optimization Of Load-Bearing And Impact Energy Absorption Capacities Of Honeycomb Structures By Density Gradation, Oyindamola Khadijat Rahman

Theses and Dissertations

Density gradation has been analytically and experimentally proven to enhance the load-bearing and energy absorption efficiency of cellular solids. This research focuses on the analytical optimization (by virtual experiments) of polymeric honeycomb structures made from flexible thermoplastics to achieve density-graded structures with desired mechanical properties. The global stress-strain curves of single-density honeycomb structures are used as input to an analytical model that enables the characterization of the constitutive response of density-graded hexagonal honeycombs with discrete and continuous gradations and for various gradients. The stress-strain outputs are used to calculate the specific energy absorption, efficiency, and ideality metrics for all density-graded …

Preparation And Characterization Of Single Layer Conducting Polymer Electrochromic And Touchchromic Devices, Sharan Kumar Indrakar

USF Tampa Graduate Theses and Dissertations

Electrochromic devices (ECDs) have triggered great interest because of their potential applicability in energy-efficient buildings and low power display systems, including reflective type smart windows/mirrors and wearable-flexible devices. In the past decades, electrochromic technologies with different device structures and materials have been proposed. The idea of employing a simple device structure with a durable, cost effective electrolyte is crucial to designing and manufacturing high-performance ECDs. With this idea in mind, this thesis describes the various efforts to develop a simple ECD comprising of a composite single active layer gel electrolyte, sandwiched between two transparent conducting electrodes, lasting over 10,000 cycles …

An Investigation On Formability And Crystallographic Texture In Novel Magnesium Alloys, Pnina Ari-Gur, Andreas Quojo Quainoo, Shubram Subramanyam, Ashkan Razania, Sven Vogel, Wei Gao

Mechanical and Aerospace Engineering Faculty Publications

Magnesium alloys offer many advantages. They offer very low density and good strength. They also offer good damping properties. One of the industries where reducing component weight is the automotive industry. That makes the magnesium alloys good candidates for these applications. Reduced weight of an automobile means also lower fuel consumption. The hexagonal closed packed structure of magnesium, lends itself to strong mechanical anisotropy. In the current work, neutron diffraction was used to study the crystallographic texture developed in novel magnesium alloys during cold rolling operations. The texture was compared with that developed in the commercial AZ-31 magnesium alloy. Tests …

Frequency Effect On Peak Pressure Coefficients Using The Narrowband Synthesis Random Flow Generator (Nsrfg) Method, Zayuris Del Carmen Atencio Mojica

Graduate Theses and Dissertations

The collapse of the Tacoma Narrows Bridge in Washington state in 1940 due to high wind forces gave structural engineers notice of the importance of understanding the behavior of wind forces on infrastructure. Wind forces play an important role in the design of buildings and other structures. ASCE 7-16 is the manual used for the design of these buildings and other structures throughout the country. These design criteria have been approved based on research projects involving experimental procedures. For the design of wind loads, ASCE 7-16 uses criteria based on wind tunnel (WT) tests. However, since the development of computing …

Tribological Studies Of Thick Polytetrafluoroethylene Coatings Enhanced By Polydopamine And Nanoparticles, Sujan Kumar Ghosh

Graduate Theses and Dissertations

Polytetrafluoroethylene (PTFE) is a popular low friction solid lubricant with high chemical and thermal stability. Thick PTFE coatings have the potential for many tribological applications, such as replacing Tin-based Babbitt materials in journal bearings. However, the weak bonding strength to the substrate and the high wear rate of PTFE coatings are current limiting factors. The lack of understanding of their tribological properties and wear mechanisms in oil-lubricated conditions and how coating thickness affects the tribological performance further hindered the use of PTFE coatings. In this dissertation, polydopamine (PDA), a bio-inspired adhesive, is used as an underlayer for or as a …