Engineering Commons^™

Study On Forming Dna-Mediated Nanoparticle Conjugates: Toward Detection Of Covid-19, Chinmay Nitin Afzulpurkar

Material Science and Engineering Theses - Archive

The objective of this thesis is to establish a rapid, robust, and reproducible procedure to controllably assemble DNA-functionalized Au nanoparticles (AuNPs) into satellite-shaped nanostructures using sequence-specific DNA hybridization. A target DNA strand with COVID-19 sequence (t-DNA) is used as a bridge to connect a capture DNA functionalized on a 50nm gold nanoparticle (C-AuNP) and a probe DNA functionalized on a 30nm nanoparticle (P-AuNP), creating C-AuNP/t-DNA/P-AuNP conjugates. The C-DNA is complementary to a portion of t-DNA, and P-DNA is complementary to the other portion of t-DNA. The parameters that affect the conjugate formation, including hybridization buffer strength, hybridization temperature, and DNA …

Simulation And Fabrication Of All Oxide-Based Ito/Tio2/Cuo/Au Heterostructure For Solar Cell Applications, Sajal Islam

Graduate Theses/Dissertations

Oxide heterostructures have drawn great attention lately, due to their environment-friendly properties and potential applications in optoelectronic devices. In this work, a simulation study of a heterojunction solar cell was performed with SCAPS (a solar cell simulator) using TiO2 as an n-type and CuO as a p-type layer. The thickness and the dopant-dependent simulations have shown that the solar cell operates at a maximum efficiency of 19.2% when the thickness of the TiO2/CuO layers is chosen 1.4µm/1.2µm compared to the 11.5% efficiency when FTO is replaced with ITO. An indium-doped tin oxide (ITO) vs fluorine-doped tin oxide (FTO) comparison study …

Pulsed Laser Annealing On The Optoelectronic Properties Of Zno Thin Films, Md Abu Zobair

Graduate Theses/Dissertations

ZnO thin films have attracted great attention recently due to their unique electronic and optical properties. However, for proper implementation of ZnO in electronic devices it is necessary to understand the role of native point defects present inside the material as these wide bandgap semiconductors are inherently n-type due to oxygen vacancies. The objective is to control the electronic and optical properties of ZnO thin films through pulsed laser annealing (PLA). Thin films of ZnO have been grown on different substrates using pulsed laser deposition. Then PLA of the films are done by changing laser parameters (energy, frequency, pulse width, …

Structure And Kinetics Of Twin Boundaries In Shape Memory Alloys, Bibek Jung Karki

Boise State University Theses and Dissertations

Shape memory alloys (SMAs) are functional materials that recover from large strains without permanent deformation. In magnetic shape memory alloys (MSMAs), the reversible deformation is driven either magnetically or mechanically. Two underlying phenomena are responsible for the shape memory effect: (a) a diffusionless, martensitic transformation and (b) twinning in the martensite phase.

In MSMAs, the reversible plastic deformation occurs via twinning in the martensite phase, particularly via the movement of twinning disconnections (TDs) along the twin boundaries (TBs). A geometric algorithm called the classical model (CM) of deformation twinning describes operative twinning modes of a given crystal system. There are …

Structural Dynamics And Encapsulation Properties Of Polyelectrolyte Complex Micelles, Sachit Shah

Electronic Theses and Dissertations, 2020-2023

Charged therapeutics such as nucleic acids and proteins can treat a vast range of human diseases that are traditionally undruggable. Their broadness in treating disease is due to their ability to influence cellular function. However, their high charge density and physiological barriers such as enzymatic degradation, hinder the deliverability of these molecules to the sites of disease. Polyelectrolyte complex (PEC) micelles are core-corona nanostructures that can encapsulate charged molecules and offer a platform for delivery. PECs form the core, when two oppositely charged polyelectrolytes are mixed in an aqueous solution, and the micelle corona is a neutral hydrophilic polymer that …

The Effect Of Green Biobased Binder On Structural, Mechanical, Liquid Absorption And Wetting Properties Of Coated Papers, Bilge N. Altay, Charles Klass, Ting Chen, Alexandar Fleck, Cem Aydemir, Arif Karademir, Paul D. Fleming

Articles

Synthetic styrene-butadiene (SB) and styrene-acrylic (SA) latex binders used in paper coating formulations are common and based on unsustainable petroleum sources. Today's papermaking industry turns towards sustainable substitutes that do not compromise quality, and reduce carbon emission, toxic substance release and waste disposal concerns related to fossil fuel sources. In this study, colloidal starch-based latex nanoparticles that do not require cooking were used for pigment coating and coated on the paper surfaces. The effects of these new biobased binders on the structural and mechanical strength properties, liquid absorption, wetting and surface topography of the paper were investigated and compared with …

Understanding Process-Structure-Property-Performance Relationships Of Thermoplastic Olefins (Tpo) Foams Through A Novel Manufacturing To Response Pathway, Sai Aditya Pradeep

All Dissertations

The global transportation industry is the second highest contributor to climate change. As a result, there has been a concerted effort to spearhead research in economical lightweighting technologies, as every 10 % reduction in weight will lead to to 6 – 8 % improvement in fuel efficiency. Additionally, the recent push for electrification and the emphasis on Corporate Average Fuel Economy (CAFE) standards have seen original equipment manufacturers (OEM’s) dive into lightweighting of materials to improve overall range and/or fuel-efficiency. Thermoplastic Olefins (TPOs) have in recent years carved out a niche in the automotive industry due to advantages such as …

Deep Learning-Guided Prediction Of Material’S Microstructures And Applications To Advanced Manufacturing, Jianan Tang

All Dissertations

Material microstructure prediction based on processing conditions is very useful in advanced manufacturing. Trial-and-error experiments are very time-consuming to exhaust numerous combinations of processing parameters and characterize the resulting microstructures. To accelerate process development and optimization, researchers have explored microstructure prediction methods, including physical-based modeling and feature-based machine learning. Nevertheless, they both have limitations. Physical-based modeling consumes too much computational power. And in feature-based machine learning, low-dimensional microstructural features are manually extracted to represent high-dimensional microstructures, which leads to information loss.

In this dissertation, a deep learning-guided microstructure prediction framework is established. It uses a conditional generative adversarial network (CGAN) …

Anisotropy In Impact Toughness Of Powder Bed Fused Aisi 304l Stainless Steel, Sreekar Karnati, Atoosa Khiabhani, Aaron Flood, Frank W. Liou, Joseph William Newkirk

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The current effort involved investigation into the anisotropy of AISI 304L fabricated through laser powder bed fusion. Charpy V‐notch specimens made from material fabricated at three different build orientations were tested and analyzed. A statistically significant difference among the toughness values indicates the presence of anisotropy within the additively manufactured material. While the lowest toughness was found in vertically built specimens, the horizontal specimens were found to exhibit the highest toughness. From the fracture surfaces, an atypical mode of failure was observed. Exclusive crack propagation along the interlayer track boundaries was observed. The toughness variation correlated with the ease of …

Glycan Functionalization Of Iron Oxide Nanoparticles (Ionps) As A Method Of Inactivating Antibiotic Resistant Neisseria Gonorrhoeae Via A Magnetically Mediated Energy Delivery (Magmed) System, Cedric Taylor

All Theses

With the increase of antibiotic resistant bacteria, current established therapeutic treatment methods are rapidly demonstrating decreasing efficacy. For this project, we are studying a novel alternate mechanism of treating antibiotic resistant bacteria by utilizing magnetic iron oxide nanoparticles (IONPs) coated with a heterobifunctional polyethylene glycol polymer (PEG) and functionalized with glycan structures that can interact with Neisseria gonorrhoeae FA1090. Interaction between the IONPs and bacteria is manipulated by an external alternating magnetic field (AMF) in a process known as magnetically mediated energy delivery (MagMED). Magnetic IONPs were synthesized and reacted with PEG (PEG-IONPs) and functionalized with glycans Gal(α1-3)Gal(β1-4)Glc(β1-1) (common name: …

Super-Adsorbent Hydrogels For Removal Of Methylene Blue From Aqueous Solution: Dye Adsorption Isotherms, Kinetics, And Thermodynamic Properties, Buddhabhushan Salunkhe, Thomas P. Schuman

Chemistry Faculty Research & Creative Works

Removal of dyes through adsorption from wastewater has gained substantial interest in recent years, especially in development of hydrogel-based adsorbents, owing to their easy use and economical nature. The aim of the present study was to design a super-adsorbent hydrogel based on sodium styrene sulfonate (NaSS) monomer for removal of dyes like methylene blue (MB). NaSS displays both an aromatic ring and strongly ionic group in its monomer structure that can enhance adsorption capacity. Poly (sodium styrene sulfonate-co-dimethylacrylamide) hydrogels were prepared by solution free radical polymerization using gelatin meth acryloyl (GelMA) as crosslinker, creating a highly porous, three-dimensionally crosslinked polymer …

Reliability Characterization Of A Low-K Dielectric Using Its Magnetoresistance As A Diagnostic Tool, Philip Alister Williams

Legacy Theses & Dissertations (2009 - 2024)

The introduction of low dielectric constant materials within the integrated circuit (IC) chip technology industry was a concerted effort to decrease the resistance-capacitance (RC) time delay inherent within the dielectric materials used as insulators. This stems from a demand for greater device density per IC chip and decreased feature sizes but is fast becoming a reliability issue. Concomitant with the demand for decreased feature sizes, also in adherence with Moore’s Law (which states that the number of devices on a die doubles every two years), is a reduction in device speed and performance due to device intra-level interconnection signal delays. …

Silver Microparticle And Submicron Wire - Polylactic Acid Composites For Additive Manufacturing, Jenna W. Robichaux

LSU New Orleans Theses and Dissertations

This thesis explores the incorporation of silver microparticle and submicron wire additives into thermoplastic filament feedstock for fused filament fabrication (FFF) to create multifunctional three-dimensional (3D) printable composites. The impact of silver microparticle and submicron wire additives on mechanical behavior along with antibacterial effect of the silver microparticle and submicron wire additives on printed objects were assessed.

Composite FFF filaments were fabricated by solution processing, granulation, and extrusion. Differential Scanning Calorimetry (DSC) was conducted to measure the glass transition and melting point temperatures of the composite filaments for 3D printing. The effect of the additive addition on the thermal properties …

Microstructural And Optical Properties Of Mgal2o4 Spinel: Effects Of Mechanical Activation, Y2o3 And Graphene Additions, Nina Obradovic, William Fahrenholtz, Cole Corlett, Suzana Filipovic, Marko Nikolic, Bojan A. Marinkovic, Simone Failla, Diletta Sciti, Daniele Di Rosa, Elisa Sani

Materials Science and Engineering Faculty Research & Creative Works

Magnesium Aluminate and Other Alumina-Based Spinels Attract Attention Due to their High Hardness, High Mechanical Strength, and Low Dielectric Constant. MgAl₂O₄ Was Produced by a Solid-State Reaction between MgO and Α-Al₂O₃ Powders. Mechanical Activation for 30 Min in a Planetary Ball Mill Was Used to Increase the Reactivity of Powders. Yttrium Oxide and Graphene Were Added to Prevent Abnormal Grain Growth during Sintering. Samples Were Sintered by Hot Pressing under Vacuum at 1450◦C. Phase Composition and Microstructure of Sintered Specimens Were Characterized by X-Ray Powder Diffraction and Scanning Electron Microscopy. Rietveld Analysis Revealed 100% …

Synthesis Of Polyethylene Glycol-Based Hydrogels And Silver/Gold Nanostructures For Biomedical Applications, Isabelle Ishimwe Niyonshuti

Graduate Theses and Dissertations

This work focuses on the synthesis of biocompatible polyethylene glycol (PEG)-based hydrogels, silver nanoparticles (AgNPs), and silver-gold nanocages (Ag-AuNCs) for biomedical applications. The dissertation includes two parts with Part I on the work of PEG-based hydrogel for wound healing applications and Part II on the work of Ag/Au nanostructures for antimicrobial applications. Part I studies PEG-based hydrogel for the delivery of fibroblast growth factors (FGFs) for wound healing applications, aiming to overcome the challenge of designing hydrogels capable of the sustained release of bioactive FGFs. This research develops new biocompatible anionic injectable hydrogel formulations based on Poly (Oligo Ethylene Glycol …

Two-Dimensional Black Phosphorus For Terahertz Emission And Near-Field Radiative Heat Transfer, Mahmudul Hasan Doha

Graduate Theses and Dissertations

The main focus of this work is to investigate two potential optical and optoelectronic applications of black phosphorus (BP): the near-field radiative heat transfer in plasmonic heterostructures with graphene and terahertz emission from multi-layer BP photoconductive antennas. When the separation distance between graphene-black phosphorene is much smaller than or comparable to the thermal wavelength at different temperatures, a near-field radiation heat transfer breaks the Planck blackbody limit. The magnitude of the near-field radiation enhancement acutely depends on the gate voltage, doping, and vacuum gap of the graphene and BP pair. The strong near-field radiation heat transfer enhancement of the specific …

Synthesis, Crystal Structure And Ionic Conductivity Of Ruddlesden-Popper Oxide Materials: Effects Of Ionic Radii And Defects On Lithium-Ionic Conductivity., Selorm Joy Fanah

Electronic Theses and Dissertations

Layered perovskite oxides of the Ruddlesden-Popper (RP) type structure can be good lithium-ion conductors for solid electrolyte applications in all-solid-state batteries, due to the large gap separating octahedral layers which can be useful pathways for Li-ion conduction. However, little work has been done on their lithium-ion transport properties in these materials despite their interesting structural properties. This work highlights the synthesis and study of the ionic conductivities in a series of n = 2 and 3 Ruddlesden-Popper oxides, as part of an ongoing investigation in search of alternative solid electrolyte materials. Several different strategies were employed for the enhancement of …

Investigation Of Optical And Structural Properties Of Gesn Heterostructures, Oluwatobi Gabriel Olorunsola

Graduate Theses and Dissertations

Silicon (Si)-based optoelectronics have gained traction due to its primed versatility at developing light-based technologies. Si, however, features indirect bandgap characteristics and suffers relegated optical properties compared to its III-V counterparts. III-Vs have also been hybridized to Si platforms but the resulting technologies are expensive and incompatible with standard complementary-metal-oxide-semiconductor processes. Germanium (Ge), on the other hand, have been engineered to behave like direct bandgap material through tensile strain interventions but are well short of attaining extensive wavelength coverage. To create a competitive material that evades these challenges, transitional amounts of Sn can be incorporated into Ge matrix to form …

Using Peptide Design To Engineer Polyelectrolyte Complex Biomaterials, Sara Tabandeh

Electronic Theses and Dissertations, 2020-2023

The self-assembly of oppositely charged polymers provides a versatile platform to design materials for diverse applications in biology and medicine. Electrostatically-driven phase separation of oppositely charged polymers in aqueous solution gives rise to the formation of a polymer-rich phase called a polyelectrolyte complex (PEC). PECs can be in the form of liquid droplets (complex coacervates) or amorphous solid precipitates. Unlike synthetic polymers, peptides are good candidates for developing tailor-made formulations and structure-property relationships due to their biocompatibility, precise control over sequences, and ability to program hydrogen bonding interactions. However, little is known about the effect of combining additional molecular interactions …

Polyvinyl Chloride Gels: Theoretical Modeling Of Their Actuation Mechanism And Characterization Of Their Properties, Zachary Frank

UNLV Theses, Dissertations, Professional Papers, and Capstones

Polyvinyl chloride (PVC) gels are an electroactive polymer smart material which has been considered in a variety of actuator applications. Their large deformation, fast response rates, optical transparency, and soft nature has made them a key area of interest in fields ranging from soft robotics to optics. PVC gels are made from PVC mixed with large quantities of plasticizer, such as dibutyl adipate (DBA). When a voltage is applied, the gel experiences an “anodophilic” deformation (in which it moves preferentially towards the anode). This unique characteristic is the result of a charge buildup near the anode surface, which creates electromechanical …

Automated Mini-Tubular Ceramic Production, Hunter Brooks, Daniel Freeman, Leo Taranta-Slack

Mechanical Engineering

Researchers at Lawrence Livermore National Laboratory need a way to increase the rate of manufacturing of mini-tubular ceramics to be used in testing particulate air filters. This document outlines our process from researching and writing an initial scope of work all the way to fabricating and testing a final prototype. This journey takes us through the background research, ideation process and selection of a final design. We also detail the desired engineering specifications and our concept selection process. We dedicate a significant portion of this report to discussion of our final design. We delve into how it was manufactured as …

An Investigation Into Energy-Material Properties Interaction In Additive Manufacturing Of Polymers., Pu Han

Electronic Theses and Dissertations

Additive manufacturing (AM), known as three-dimensional (3D) printing, is a fabrication process to build 3D objects layer by layer based on computer aided design (CAD) model or digital 3D model. Fused filament fabrication (FFF) has become a preferred method for additive manufacturing due to its cost-effectiveness and flexibility. However, the parts built using FFF process suffer from lower mechanical strength compared to that fabricated using traditional method and rough surface finish. With this motivation, this dissertation aims to develop and implement a novel in-process laser assisted technique on FFF to heal the microstructure of FFF built objects by enhancing reptation …

Synthesis And Characterization Of 4,6-Protected Glucosamine Derivatives And Branched Glycoconjugates, Jonathan Bietsch

Chemistry & Biochemistry Theses & Dissertations

Low molecular weight gelators (LMWGs) are small molecules that self-assemble in appropriate solvents to form three dimensional networks that immobilize the solvent, creating a supramolecular gel. The self-assembly of LMWGs occurs through non-covalent interactions such as hydrogen bonding, aromatic interactions, donor-acceptor interactions, Van der Waals interactions, hydrophobic forces, halogen bonding, etc. Due to self-assembly occurring through reversible non-covalent interactions, supramolecular gels can undergo a gel to solution transformation. Because of this, these materials can be sensitive to external stimuli such as temperature changes, pH changes, and other stimuli that effect non-covalent interactions. This makes the synthesis of LMWG’s an appealing …

Tunable Compressive Mechanical Behavior Of Ice-Templated Materials, Sashanka Akurati

Mechanical & Aerospace Engineering Theses & Dissertations

The inherent hierarchical microstructural organization in natural materials is responsible for their excellent mechanical properties beyond that predicted by the simple rule-of-mixtures. Further exhibit synergy between strength and toughness, otherwise mutually exclusive in brittle materials. Conventional processing methods are unable to replicate hierarchical microstructures in engineering ceramics akin to that observed in natural materials. Ice-templating has emerged as a potential technique to fabricate bioinspired hierarchical materials. This process involves simultaneous unidirectional solidification and phase segregation of aqueous suspensions. Ice-templated porous ceramic materials have received significant attention for overcoming several limitations of conventional ceramic foams currently used in numerous engineering applications. …

Dreams Of Molecular Beams: Indium Gallium Arsenide Tensile-Strained Quantum Dots And Advances Towards Dynamic Quantum Dots (Moleculare Radiorum Somnia: Indii Gallii Arsenicus Tensa Quanta Puncta Et Ad Dinamicae Quantae Puntae Progressus), Kevin Daniel Vallejo

Boise State University Theses and Dissertations

Through the operation of a molecular beam epitaxy (MBE) machine, I worked on developing the homoepitaxy of high quality InAs with a (111)A crystallographic orientation. By tuning substrate temperature, we obtained a transition from a 2D island growth mode to step- ow growth. Optimized MBE parameters (substrate temperature = 500 °C, growth rate = 0.12 ML/s and V/III ratio ⩾ 40) lead to growth of extremely smooth InAs(111)A films, free from hillocks and other 3D surface imperfections. We see a correlation between InAs surface smoothness and optical quality, as measured by photoluminescence spectroscopy. This work establishes InAs(111)A as a platform …

How To Recognize And Control Interfacial Phenomena That Hinder The Advancement Of Clean Energy Technologies, Corey Michael Efaw

Boise State University Theses and Dissertations

Nuclear energy and electrochemical energy storage, such as batteries, are key parts to the clean energy transition of critical infrastructure. This work aims to define, monitor, and modify interfacial layers that would improve the utility of materials in harsh environments seen in nuclear and energy storage applications. First, the studying of zirconium alloys, which is used as nuclear cladding, was done to better understand the degradation mechanisms within an extreme environment. High-resolution characterization techniques were used to correlate corrosion mechanisms to equivalent circuit models from novel in-pile electrochemical impedance spectroscopy sensors. Advancement in this sensor technology could provide further insight …

Single-Walled Carbon Nanotubes Inhibit Trpc4-Mediated Muscarinic Cation Current In Mouse Ileal Myocytes, Lina T. Al Kury, Dimitrios Papandreou, Vasyl V. Hurmach, Dariia O. Dryn, Mariia I. Melnyk, Maxim O. Platonov, Yuriy I. Prylutskyy, Uwe Ritter, Peter Scharff, Alexander V. Zholos

All Works

Single-walled carbon nanotubes (SWCNTs) are characterized by a combination of rather unique physical and chemical properties, which makes them interesting biocompatible nanostruc-tured materials for various applications, including in the biomedical field. SWCNTs are not inert carriers of drug molecules, as they may interact with various biological macromolecules, including ion channels. To investigate the mechanisms of the inhibitory effects of SWCNTs on the muscarinic receptor cation current (mICAT), induced by intracellular GTPγs (200 µM), in isolated mouse ileal myocytes, we have used the patch-clamp method in the whole-cell configuration. Here, we use molecular docking/molecular dynamics simulations and direct patch-clamp recordings of …

Development Of Lambda Factors For Masonry Design With Lightweight Grout, Rumi Shrestha

All Theses

Reduction in structural mass, improvement in thermal performance, and reduction in shrinkage cracking through internal curing are some of the reasons that lightweight (LW) aggregates have been used in structures and pavements for decades. However, lightweight grout is still not permitted for use in reinforced masonry construction by the TMS 402/602-16 code. In order to realize the benefits of lightweight grout in U.S. reinforced masonry construction, a codified procedure for its use is required which must be informed by experimental testing.

This research is a pilot project directed to characterize the performance of LW grout in comparison to normal weight …

Tensile-Strained Self-Assembly Of Ingaas On Inas(111)A, Kevin D. Vallejo, Trent A. Garrett, Carlos I. Cabrera, Baolai Liang, Kevin A. Grossklaus, Paul J. Simmonds

Materials Science and Engineering Faculty Publications and Presentations

We have determined a reproducible set of growth conditions for the self-assembly of tensile-strained In_1-xGa_xAs quantum dot (QD) nanostructures on (111)A surfaces. During molecular beam epitaxy, In_1-xGa_xAs islands form spontaneously on InAs(111)A when the Ga content x ≥ 50%. We analyze the structure and composition of InGaAs/InAs(111) samples using atomic force microscopy, transmission electron microscopy, and electron energy loss spectroscopy. We demonstrate control over the size and areal density of the islands as a function of In_1-xGa_xAs coverage, In_1-xGa_xAs composition, …

Creep Behavior And Deformation Mechanisms Of Spark Plasma Sintered Oxide Ceramics For Aerospace Systems At 1300˚C - 1400˚C, David D. Swanson

Theses and Dissertations

The mechanical behavior of YAG and LuAG was investigated at elevated temperatures. The specific materials investigated in this work include high-purity, polycrystalline YAG, high-purity, polycrystalline LuAG, and two doped variants of YAG: 2at% Yb-doped, polycrystalline YAG and 2at% Er-doped, polycrystalline YAG. Several billets of each material were prepared and processed by means of spark plasma sintering (SPS). Many different sintering parameters were utilized in order to obtain materials with various physical properties and to identify the effects of sintering parameters on the average grain size of the resulting materials. The compressive creep behavior of these materials was investigated at 1300°C …