Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 3301 - 3330 of 16703

Full-Text Articles in Engineering

Study On Anti‐Scattering Performance Of Asphalt Concrete On Aggregate Scattering Pavement Of Highway, Yang Siyuan, Chen Guiliang Mar 2023

Study On Anti‐Scattering Performance Of Asphalt Concrete On Aggregate Scattering Pavement Of Highway, Yang Siyuan, Chen Guiliang

Journal of China & Foreign Highway

Due to the lack of quantitative evaluation methods for aggregate scattering degree of expressway asphalt pavement in China and abroad, according to the disease characteristics of surface layer spalling, this paper adopted the Cantabro standard dispersion test to sample the concrete of the section with aggregate scattering of Huangqunan Expressway (G3) in Zhejiang Province. The dispersion impact damage modes of the mixture with different severity were analyzed, and the anti-dispersion performance of concrete was evaluated by mass loss rate and water absorption rate. The results show that aggregate scattering will reduce the density of the concrete structure at the surface …

Go to article

Variable Speed Limit Control Method For Highway Under Dense Fog, Sun Jiancheng, Qiao Jiaxing Mar 2023

Variable Speed Limit Control Method For Highway Under Dense Fog, Sun Jiancheng, Qiao Jiaxing

Journal of China & Foreign Highway

In order to solve the problem of traffic safety on expressways under dense fog and change the original fixed speed limit measures, a variable speed limit control method based on the safe allowable speed was proposed. The speed limit value was calculated based on the regulations in road traffic safety law on the speed under dense fog by considering that the traffic law does not mention the road alignment conditions, road conditions, and other factors, and the monitor data was used to approximate replace the data of individual vehicles for data optimization, and the safe speed and safe distance of …

Go to article

Design And Experimental Study On Special Spherical Support Of Pingtang Bridge, Tang Zhi, Ma Baihu, Du Bin, Xu Xiangdong, Xia Junyong Mar 2023

Design And Experimental Study On Special Spherical Support Of Pingtang Bridge, Tang Zhi, Ma Baihu, Du Bin, Xu Xiangdong, Xia Junyong

Journal of China & Foreign Highway

The vertical bearing capacity of the 16# pier of Pingtang Bridge is 10 000 kN, and the horizontal bearing capacity along the bridge is 12 000 kN, which is 120% of the vertical bearing capacity. The support angle needs to reach the technical parameter requirements of 0.05 rad, which far exceeds the requirements of 10–40% horizontal force of conventional highway supports. According to the specific engineering situation, a new type of support with a large horizontal bearing capacity was designed. Firstly, the finite element model of the support was established to analyze the mechanical properties of the support, and the …

Go to article

Study On Practical Method Of Safety Assessment For Bridges Under Heavy‐Cargo Transportation, Jiang Xu, Wang Wanfeng, He Zhensheng, Gao Xuefeng Mar 2023

Study On Practical Method Of Safety Assessment For Bridges Under Heavy‐Cargo Transportation, Jiang Xu, Wang Wanfeng, He Zhensheng, Gao Xuefeng

Journal of China & Foreign Highway

In order to meet the requirements of the industry for the high efficiency, safety, and reliability of the traffic safety assessment of heavy-duty vehicles, this paper proposed a method that combined a real-time monitoring system with a finite element method for the traffic safety assessment of heavy-duty vehicles on bridges and verified the method through practical projects. The paper evaluated the bridge’s technical condition level before the heavy-duty vehicle passes and determined the resistance reduction factor considering the bridge’s technical condition level. The finite element analysis model of the bridge was established, and the reliability of the model was verified …

Go to article

Research On Vibration Reduction Measures Of Short‐Hole Blasting For Pile Group Foundation Of Bridge, Long Lidun, Ji Zhongyan, Li Shaofang, Zhou Xu Mar 2023

Research On Vibration Reduction Measures Of Short‐Hole Blasting For Pile Group Foundation Of Bridge, Long Lidun, Ji Zhongyan, Li Shaofang, Zhou Xu

Journal of China & Foreign Highway

In the construction of pile hole blasting of group pile foundation of bridges, due to the small clear distance between piles, the blasting vibration will have adverse effects on the wall protection of adjacent pile holes and the poured pile core concrete. Measures thus should be taken to control the seismic wave vibration velocity. In view of the inapplicability of conventional blasting vibration reduction measures such as reducing charge and setting isolation ditch in the construction of pile group foundation of the bridge, this paper proposed vibration reduction measures such as setting isolation holes and using air bags to replace …

Go to article

Analysis Of Influence Parameters Of Steel Corrugated Plate‐Concrete Composite Arch Culvert, Zhang Haijun Mar 2023

Analysis Of Influence Parameters Of Steel Corrugated Plate‐Concrete Composite Arch Culvert, Zhang Haijun

Journal of China & Foreign Highway

In order to explore the parameter effect of a composite arch culvert with corrugated steel plate and concrete, based on the engineering background of a composite arch culvert, the influence rules of four parameters, namely fill height, pipe diameter, wall thickness, and uneven settlement, on the stress and deformation of the arch culvert were analyzed based on the control variable method. The results show that the deformation and stress of the arch culvert are positively correlated with the fill height h and pipe diameter R. When h < 25 m, the deformation and stress increase linearly with the increase in the fill height, and when h > 25 m, the deformation and stress increase in a curve form. When R …

Go to article

Research And Analysis On Controlled Blasting Demolition Of Continuous Thin‐Walled Box Ribbed Arch Bridge, Ma Shaojun, Chen Huibin, Chai Wendong, Zhang Chunquan, Wang Yuan Mar 2023

Research And Analysis On Controlled Blasting Demolition Of Continuous Thin‐Walled Box Ribbed Arch Bridge, Ma Shaojun, Chen Huibin, Chai Wendong, Zhang Chunquan, Wang Yuan

Journal of China & Foreign Highway

The 1st bridge of the Jialing River in Pengan County is erected over the Jialing River, a tributary of the Yangtze River. Due to earthquakes and perennial high load operation, the overall technical condition is “Class Ⅴ”, which cannot meet the requirements of the design load grade. This bridge is the longest highway bridge dismantled in Sichuan Province. Its structure is a multi-span continuous thin-walled box ribbed arch bridge. In addition, there are obvious diseases, so the demolition is difficult, and the safety risk is great. For the demolition of the bridge by controlled blasting, numerical simulation, shaped charge cutting …

Go to article

Study On Parameter Optimization Of Feet‐Lock Anchor Pipes Of Tunnels In Unconsolidated Formation, Tang Heqing, Jiang Xishan, Yang Peng Mar 2023

Study On Parameter Optimization Of Feet‐Lock Anchor Pipes Of Tunnels In Unconsolidated Formation, Tang Heqing, Jiang Xishan, Yang Peng

Journal of China & Foreign Highway

In order to give full play to the supporting role of the feet-lock anchor pipe in the tunnel with unconsolidated formation, it is necessary to obtain the optimal construction parameters of the feet-lock anchor pipe. Based on a tunnel project on the Huaping–Lijiang Expressway in Yunnan Province, this paper conducted numerical simulation and field test analysis. By comparing the arch subsidence and horizontal convergence of the supporting structure when the feet-lock anchor pipe with different parameters was constructed, the paper explored the characteristics and causes of the influence of construction parameters on the feet-lock effect. The results show that the …

Go to article

Simulation Study On Flame Retardant Effect Of Warm‐Mixed Flame Retardant Pavement In Highway Tunnel Mar 2023

Simulation Study On Flame Retardant Effect Of Warm‐Mixed Flame Retardant Pavement In Highway Tunnel

Journal of China & Foreign Highway

In order to obtain the flame retardant effect of the warm-mixed flame retardant asphalt pavement in highway tunnels, based on the finite element method and thermodynamics theory, the thermal analysis module of Ansys finite element software was used to study the flame retardant effect of ordinary asphalt pavement, flame retardant asphalt pavement, and warm-mixed flame retardant asphalt pavement under different fire scales. The maximum temperature of the three types of pavement increased with the increase in the fire scale. Under any fire scale, the flame retardant effect of the warm-mixed flame retardant asphalt pavement was increased by 4.9%–8.5% compared with …

Go to article

Installation Construction Technology Of Composite Girder Cable‐Stayed Bridge Superstructure In Deep‐Cutting Gorge, Ren Lei, Lu Liang, Dong Zhengliang Mar 2023

Installation Construction Technology Of Composite Girder Cable‐Stayed Bridge Superstructure In Deep‐Cutting Gorge, Ren Lei, Lu Liang, Dong Zhengliang

Journal of China & Foreign Highway

In view of the installation problems of superimposed beam cable-stayed bridge across the deep canyon, this paper studied the superimposed beam lifting, transport on beam, and superimposed beam installation and proposed three kinds of lifting technology with tower truss crane, beam lifting door crane, and large tower crane, as well as two kinds of installation technology including piecemeal assembly by full rotating deck crane and whole segment assembly truss deck crane. It also made a relative comparative analysis, solving the difficulty in vertical lifting on such bridges and providing a reference for the construction of the same type of cable-stayed …

Go to article

Experiment Research Of High Pressure Jet Grouting Pile On Ultra‐Shallow Buried Tunnel In Strong Weathered Stratum, Lu Liyang, Liu Huan, Li Pinpin Mar 2023

Experiment Research Of High Pressure Jet Grouting Pile On Ultra‐Shallow Buried Tunnel In Strong Weathered Stratum, Lu Liyang, Liu Huan, Li Pinpin

Journal of China & Foreign Highway

By taking the ultra-shallow buried construction of Xinwu Tunnel in Luoding–Xinyi Expressway in Guangdong Province as the engineering background, the key construction parameters and formation reinforcement effect of high-pressure rotary churning pile in ultra-shallow buried tunnel surrounding rock of fully weathered strata were compared. The results show that: ① slurry pressure, rotary churning speed, and lifting speed have obvious effects on the static load bearing capacity of a single pile. Under the same static load condition, greater slurry pressure indicates a lower cumulative settlement value of a single pile and a smaller increase in cumulative settlement value, and the change …

Go to article

Study On Anti‐Scattering Performance Of Asphalt Concrete On Aggregate Scattering Pavement Of Highway, Yang Siyuan, Chen Guiliang Mar 2023

Study On Anti‐Scattering Performance Of Asphalt Concrete On Aggregate Scattering Pavement Of Highway, Yang Siyuan, Chen Guiliang

Journal of China & Foreign Highway

Due to the lack of quantitative evaluation methods for aggregate scattering degree of expressway asphalt pavement in China and abroad, according to the disease characteristics of surface layer spalling, this paper adopted the Cantabro standard dispersion test to sample the concrete of the section with aggregate scattering of Huangqunan Expressway (G3) in Zhejiang Province. The dispersion impact damage modes of the mixture with different severity were analyzed, and the anti-dispersion performance of concrete was evaluated by mass loss rate and water absorption rate. The results show that aggregate scattering will reduce the density of the concrete structure at the surface …

Go to article

Variable Speed Limit Control Method For Highway Under Dense Fog, Sun Jiancheng, Qiao Jiaxing Mar 2023

Variable Speed Limit Control Method For Highway Under Dense Fog, Sun Jiancheng, Qiao Jiaxing

Journal of China & Foreign Highway

In order to solve the problem of traffic safety on expressways under dense fog and change the original fixed speed limit measures, a variable speed limit control method based on the safe allowable speed was proposed. The speed limit value was calculated based on the regulations in road traffic safety law on the speed under dense fog by considering that the traffic law does not mention the road alignment conditions, road conditions, and other factors, and the monitor data was used to approximate replace the data of individual vehicles for data optimization, and the safe speed and safe distance of …

Go to article

Application Of Digital Image Processing In Cracks Of Concrete Pavement, Gao Fan, He Chunguang, Wang Pengzhang, Qin Yanping, Duo Huaqiong Mar 2023

Application Of Digital Image Processing In Cracks Of Concrete Pavement, Gao Fan, He Chunguang, Wang Pengzhang, Qin Yanping, Duo Huaqiong

Journal of China & Foreign Highway

The image obtained by using the traditional crack detection method of concrete pavement has some problems, such as low contrast and high noise, which makes it difficult to meet the requirements of modern road engineering management or non-destructive testing. In order to eliminate the interference in crack images, digital image processing technology was used to improve the image quality through computers. This paper took digital image processing as the core and introduced its development and application in pavement cracks. Based on the research progress and achievements of digital image processing on pavement cracks in recent years, the principles and characteristics …

Go to article

Design And Experimental Study On Special Spherical Support Of Pingtang Bridge, Tang Zhi, Ma Baihu, Du Bin, Xu Xiangdong, Xia Junyong Mar 2023

Design And Experimental Study On Special Spherical Support Of Pingtang Bridge, Tang Zhi, Ma Baihu, Du Bin, Xu Xiangdong, Xia Junyong

Journal of China & Foreign Highway

The vertical bearing capacity of the 16# pier of Pingtang Bridge is 10 000 kN, and the horizontal bearing capacity along the bridge is 12 000 kN, which is 120% of the vertical bearing capacity. The support angle needs to reach the technical parameter requirements of 0.05 rad, which far exceeds the requirements of 10–40% horizontal force of conventional highway supports. According to the specific engineering situation, a new type of support with a large horizontal bearing capacity was designed. Firstly, the finite element model of the support was established to analyze the mechanical properties of the support, and the …

Go to article

Study On Practical Method Of Safety Assessment For Bridges Under Heavy‐Cargo Transportation, Jiang Xu, Wang Wanfeng, He Zhensheng, Gao Xuefeng Mar 2023

Study On Practical Method Of Safety Assessment For Bridges Under Heavy‐Cargo Transportation, Jiang Xu, Wang Wanfeng, He Zhensheng, Gao Xuefeng

Journal of China & Foreign Highway

In order to meet the requirements of the industry for the high efficiency, safety, and reliability of the traffic safety assessment of heavy-duty vehicles, this paper proposed a method that combined a real-time monitoring system with a finite element method for the traffic safety assessment of heavy-duty vehicles on bridges and verified the method through practical projects. The paper evaluated the bridge’s technical condition level before the heavy-duty vehicle passes and determined the resistance reduction factor considering the bridge’s technical condition level. The finite element analysis model of the bridge was established, and the reliability of the model was verified …

Go to article

Study On Pavement Performance Of Waterborne Epoxy Emulsified Asphalt And Its Application In Micro‐Surface, Jiang Hai, Liu Dachang Mar 2023

Study On Pavement Performance Of Waterborne Epoxy Emulsified Asphalt And Its Application In Micro‐Surface, Jiang Hai, Liu Dachang

Journal of China & Foreign Highway

In order to improve the pavement performance at micro-surface, waterborne epoxy resin was used to modify the emulsified asphalt, and the compatibility, microstructure, mechanical properties, rheological properties, and pavement performance of mixtures of the modified emulsified asphalt were studied. The storage stability test shows that the epoxy emulsion has good compatibility with emulsified asphalt. With the increase in waterborne epoxy resin content, the modified emulsified asphalt tends to form an epoxy resin-dominated skeleton structure. At the same time, with the increase in waterborne epoxy resin content, the adhesion and mechanical properties of emulsified asphalt and aggregate are significantly improved. At …

Go to article

Restoration And Modification Of A Sputter Tool For The Deposition Of A Zno Guiding Layer Via Rf Sputtering, Matthew Watson Mar 2023

Restoration And Modification Of A Sputter Tool For The Deposition Of A Zno Guiding Layer Via Rf Sputtering, Matthew Watson

USF Tampa Graduate Theses and Dissertations

In this thesis, a novel sputter tool was restored and modified to deposit a ZnO film for future applications as a guiding layer on a surface acoustic wave (SAW) device. Some restorations and modifications included a water chiller being sized and added to the tool, leak checks to establish an ultra-high vacuum of 10-6 Torr, then finally heat lamps for temperature control were installed. Once modified, one of the preexisting magnetrons was utilized to deposit a ZnO via RF sputtering onto a quartz substrate. The layer was characterized via energy-dispersive X-ray spectroscopy which showed the existence of Zn on the …

Go to article

Oh, My Darling Clementine: A Detailed History And Data Repository Of The Los Alamos Plutonium Fast Reactor, Hannah K. Patenaude, Franz J. Freibert Mar 2023

Oh, My Darling Clementine: A Detailed History And Data Repository Of The Los Alamos Plutonium Fast Reactor, Hannah K. Patenaude, Franz J. Freibert

College of Sciences Graduate Student Research

The Los Alamos Plutonium Fast Reactor, Clementine, provided the first fast neutron spectrum using a metallic plutonium fuel system and liquid mercury coolant. Clementine is often mentioned in the history of fast, metal-fueled, or metal-cooled designs, with little public information regarding the specifications or timeline. This paper contains a synopsis of each report regarding the development, operation, experimental results, failures, and subsequent disassembly of Clementine to explore this unique reactor within the context of modern advanced reactor development.

Go to article

The Influence Of Bipolar Electrochemical Cell Geometry On The Studies Of Pitting Corrosion, Amin Kazem Ghamsari Mar 2023

The Influence Of Bipolar Electrochemical Cell Geometry On The Studies Of Pitting Corrosion, Amin Kazem Ghamsari

USF Tampa Graduate Theses and Dissertations

Bipolar electrochemistry (BPE) is a technique that provides a wireless alternative totraditional electrochemistry to elicit redox reactions. It has been utilized in different applications, including studying localized corrosion, gradient electrodeposition, propulsion of micromotors, and water treatment. The popularity of the method is not solely dependent on its wirelessness but more due to the simultaneous presence of cathodic and anodic poles on the same surface, which also begets its name as bipolar. The concept of the method is based on the polarization of conductive objects in an electric field in the presence of an electrolyte. In BPE, instead of controlling the …

Go to article

Lead-Free Perovskite Homojunction-Based Htm-Free Perovskite Solar Cells: Theoretical And Experimental Viewpoints, Sajid Sajid, Salem Alzahmi, Imen Ben Salem, Jongee Park, Ihab M. Obaidat Mar 2023

Lead-Free Perovskite Homojunction-Based Htm-Free Perovskite Solar Cells: Theoretical And Experimental Viewpoints, Sajid Sajid, Salem Alzahmi, Imen Ben Salem, Jongee Park, Ihab M. Obaidat

All Works

Simplifying the design of lead-free perovskite solar cells (PSCs) has drawn a lot of interest due to their low manufacturing cost and relative non-toxic nature. Focus has been placed mostly on reducing the toxic lead element and eliminating the requirement for expensive hole transport materials (HTMs). However, in terms of power conversion efficiency (PCE), the PSCs using all charge transport materials surpass the environmentally beneficial HTM-free PSCs. The low PCEs of the lead-free HTM-free PSCs could be linked to poorer hole transport and extraction as well as lower light harvesting. In this context, a lead-free perovskite homojunction-based HTM-free PSC was …

Go to article

Fast-, Light-Cured Scintillating Plastic For 3d-Printing Applications, Brian G. Frandsen, Michael Febbraro, Thomas Ruland, Theodore W. Stephens, Paul A. Hausladen, Juan J. Manfredi, James E. Bevins Mar 2023

Fast-, Light-Cured Scintillating Plastic For 3d-Printing Applications, Brian G. Frandsen, Michael Febbraro, Thomas Ruland, Theodore W. Stephens, Paul A. Hausladen, Juan J. Manfredi, James E. Bevins

Faculty Publications

Additive manufacturing techniques enable a wide range of possibilities for novel radiation detectors spanning simple to highly complex geometries, multi-material composites, and metamaterials that are either impossible or cost prohibitive to produce using conventional methods. The present work identifies a set of promising formulations of photocurable scintillator resins capable of neutron-gamma pulse shape discrimination (PSD) to support the additive manufacturing of fast neutron detectors. The development of these resins utilizes a step-by-step, trial-and-error approach to identify different monomer and cross-linker combinations that meet the requirements for 3D printing followed by a 2-level factorial parameter study to optimize the radiation detection …

Go to article

Self-Healing Properties Of Augmented Injectable Hydrogels Over Time, Connor Castro, Zachary R. Brown, Erik Brewer Mar 2023

Self-Healing Properties Of Augmented Injectable Hydrogels Over Time, Connor Castro, Zachary R. Brown, Erik Brewer

Henry M. Rowan College of Engineering Departmental Research

Injectable polymers offer great benefits compared to other types of implants; however, they tend to suffer from increased mechanical wear and may need a replacement implant to restore these mechanical properties. The purpose of this experiment is to investigate an injectable hydrogel's self-healing ability to augment itself to a previously molded implant. This was accomplished by performing a tensile strength test to examine potential diminishing mechanical properties with increasing time, as well as dye penetration tests to examine the formation of interfacial bonds between healed areas of hydrogels. There were several time points in between injections that were explored, from …

Go to article

Tunable, Reconfigurable, And Programmable Acoustic Metasurfaces: A Review, Ali Zabihi, Chadi Ellouzi, Chen Shen Mar 2023

Tunable, Reconfigurable, And Programmable Acoustic Metasurfaces: A Review, Ali Zabihi, Chadi Ellouzi, Chen Shen

Henry M. Rowan College of Engineering Departmental Research

The advent of acoustic metasurfaces (AMs), which are the two-dimensional equivalents of metamaterials, has opened up new possibilities in wave manipulation using acoustically thin structures. Through the interaction between the acoustic waves and the subwavelength scattering, AMs exhibit versatile capabilities to control acoustic wave propagation such as by steering, focusing, and absorption. In recent years, this vibrant field has expanded to include tunable, reconfigurable, and programmable control to further expand the capacity of AMs. This paper reviews recent developments in AMs and summarizes the fundamental approaches for achieving tunable control, namely, by mechanical tuning, active control, and the use of …

Go to article

Turning Dead Leaves Into An Active Multifunctional Material As Evaporator, Photocatalyst, And Bioplastic, Siyuan Fang, Xingyi Lyu, Tian Tong, Aniqa Ibnat Lim, Tao Li, Jiming Bao, Yun Hang Hu Mar 2023

Turning Dead Leaves Into An Active Multifunctional Material As Evaporator, Photocatalyst, And Bioplastic, Siyuan Fang, Xingyi Lyu, Tian Tong, Aniqa Ibnat Lim, Tao Li, Jiming Bao, Yun Hang Hu

Michigan Tech Publications, Part 1

Large numbers of leaves fall on the earth each autumn. The current treatments of dead leaves mainly involve completely destroying the biocomponents, which causes considerable energy consumption and environmental issues. It remains a challenge to convert waste leaves into useful materials without breaking down their biocomponents. Here, we turn red maple dead leaves into an active three-component multifunctional material by exploiting the role of whewellite biomineral for binding lignin and cellulose. Owing to its intense optical absorption spanning the full solar spectrum and the heterogeneous architecture for effective charge separation, films of this material show high performance in solar water …

Go to article

Closed-Loop Recyclable Plastics From Poly(Ethyl Cyanoacrylate), Allison J. Christy, Scott T. Phillips Mar 2023

Closed-Loop Recyclable Plastics From Poly(Ethyl Cyanoacrylate), Allison J. Christy, Scott T. Phillips

Materials Science and Engineering Faculty Publications and Presentations

Ethyl cyanoacrylate is a highly reactive monomer that has been used nearly exclusively to make Super Glue and related fast-setting adhesives. Here, we describe transformation of this highly abundant, readily available monomer into a closed-loop recyclable plastic that could supplant currently used (and often unrecycled/unrecyclable) plastics, such as poly(styrene). We report polymerization conditions, plastic-processing methods, and plastic-recycling protocols for poly(ethyl cyanoacrylate) plastics that make the Super Glue monomer a viable starting material for a next generation of closed-loop recyclable plastics. The processes described are scalable, and the plastics can be recycled in a closed-loop process with >90% yields, even when …

Go to article

Effect Of Substituent Location On The Relationship Between The Transition Dipole Moments, Difference Static Dipole, And Hydrophobicity In Squaraine Dyes For Quantum Information Devices, Maia Ketteridge, Austin Biaggne, Ryan Rau, German Barcenas, Olga A. Mass, William B. Knowlton, Bernard Yurke, Lan Li Mar 2023

Effect Of Substituent Location On The Relationship Between The Transition Dipole Moments, Difference Static Dipole, And Hydrophobicity In Squaraine Dyes For Quantum Information Devices, Maia Ketteridge, Austin Biaggne, Ryan Rau, German Barcenas, Olga A. Mass, William B. Knowlton, Bernard Yurke, Lan Li

Materials Science and Engineering Faculty Publications and Presentations

Aggregates of organic dyes that exhibit excitonic coupling have a wide array of applications, including medical imaging, organic photovoltaics, and quantum information devices. The optical properties of a dye monomer, as a basis of dye aggregate, can be modified to strengthen excitonic coupling. Squaraine (SQ) dyes are attractive for those applications due to their strong absorbance peak in the visible range. While the effects of substituent types on the optical properties of SQ dyes have been previously examined, the effects of various substituent locations have not yet been investigated. In this study, density functional theory (DFT) and time-dependent density functional …

Go to article

Magnetic Nanocomposites For The Remote Activation Of Sulfate Radicals For The Removal Of Rhodamine B, Pranto Paul, Marissa Nicholson, J. Zach Hilt Mar 2023

Magnetic Nanocomposites For The Remote Activation Of Sulfate Radicals For The Removal Of Rhodamine B, Pranto Paul, Marissa Nicholson, J. Zach Hilt

UK CARES Faculty Publications

The widespread presence of numerous organic contaminants in water poses a threat to the ecological environment and human health. Magnetic nanocomposites exposed to an alternating magnetic field (AMF) have a unique ability for magnetically mediated energy delivery (MagMED) resulting from the embedded magnetic nanoparticles; this localized energy delivery and associated chemical and thermal effects are a potential method for removing contaminants from water. This work developed a novel magnetic nanocomposite—a polyacrylamide-based hydrogel loaded with iron oxide nanoparticles. For this magnetic nanocomposite, persulfate activation and the contamination removal in water were investigated. Magnetic nanocomposites were exposed to AMF with a model …

Go to article

Particle Migration In Large Cross-Section Ceramic On-Demand Extrusion Components, Austin J. Martin, Wenbin Li, Jeremy Lee Watts, Gregory E. Hilmas, Ming-Chuan Leu, Tieshu Huang Mar 2023

Particle Migration In Large Cross-Section Ceramic On-Demand Extrusion Components, Austin J. Martin, Wenbin Li, Jeremy Lee Watts, Gregory E. Hilmas, Ming-Chuan Leu, Tieshu Huang

Mathematics and Statistics Faculty Research & Creative Works

Ceramic On-Demand Extrusion (CODE) is a direct ink writing process which allows for the creation of near theoretically dense ceramic components with large cross-sections due to oil-assisted drying. Yttria-stabilized zirconia (YSZ) colloidal pastes (∼d50 ≲ 1 µm) were used in CODE to produce dense (multi-road infill and ≳ 98% relative density), large continuous volume (> 1 cm3), and high fidelity (nozzle diameters ≲ 1 mm) structural ceramic components. However, many of these printed components underwent significant particle migration after forming. The reason for this particle migration defect was investigated using the coffee-ring effect for dilute solutions and rheological methods for …

Go to article

Anisotropic Thermal Expansion In High-Entropy Multicomponent Alb2-Type Diboride Solid Solutions, Frédéric Monteverde, Mattia Gaboardi, Federico Saraga, Lun Feng, William Fahrenholtz, Gregory Hilmas Mar 2023

Anisotropic Thermal Expansion In High-Entropy Multicomponent Alb2-Type Diboride Solid Solutions, Frédéric Monteverde, Mattia Gaboardi, Federico Saraga, Lun Feng, William Fahrenholtz, Gregory Hilmas

Mathematics and Statistics Faculty Research & Creative Works

High-entropy (HE) ultra-high temperature ceramics have the chance to pave the way for future applications propelling technology advantages in the fields of energy conversion and extreme environmental shielding. Among others, HE diborides stand out owing to their intrinsic anisotropic layered structure and ability to withstand ultra-high temperatures. Herein, we employed in-situ high-resolution synchrotron diffraction over a plethora of multicomponent compositions, with four to seven transition metals, with the intent of understanding the thermal lattice expansion following different composition or synthesis process. As a result, we were able to control the average thermal expansion (TE) from 1.3 x 10−6 to 6.9 …

Go to article

First Prev Next Last