Engineering Commons^™

Spectroscopic Studies On Silicon And Chalcopyrite Materials For Solar Energy Applications, Amandee Hua

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this dissertation, silicon-based materials for photovoltaics and chalcopyrite-based materials for photoelectrochemical water splitting are investigated using various spectroscopic and microscopic techniques. Although silicon dominates the photovoltaic market, further improvement can be made by using an alternative low temperature passivation approach. Currently, thermally grown SiO2 passivation is commonly used for silicon solar cells. However, this technique requires high processing temperatures (>800 °C), which increases the thermal budget, potentially decreases the bulk quality of Si, and can lead to difficulties in implementing in production lines. Here, a S-based passivation approach is studied that require lower processing temperatures of ~550 °C. …

Closed-Loop, Recyclable Plastics From Ethyl Cyanoacrylate, Allison Joy Christy

Boise State University Theses and Dissertations

Ethyl cyanoacrylate, commonly known as super glue, has held a prominent role as an adhesive for decades due to its propensity to rapidly polymerize into poly(ethyl cyanoacrylate) (PECA) under ambient conditions. Ethyl cyanoacrylate monomers and their resulting PECA polymers are bio-friendly, which has allowed them to be used as medical adhesives and to be applied to drug delivery systems. However, PECA has not been used as a plastic material due to the perceived difficulty of handling the ethyl cyanoacrylate monomer. Here, we present a novel PECA plastic that displays thermal stability and tensile strength values that are comparable to atactic …

Formulation And Optimization Of Algae-Filled Polylactic Acid Thermoplastic Compounds For Improved Biodegradation, Sydney A. Cole

Honors Theses

Conventional plastics derived from non-renewable petrochemicals – especially from fossil reserves – have become an integral part of human life because their structure can be chemically manipulated to obtain a wide range of properties and geometries necessary in nearly all industries. The volume and rate at which petroleum plastics are produced, used, and discarded has incited several significant issues related to human health, environmental conservation, and ecological biodiversity. To address these issues, many institutions have begun investigating solutions in both the development and end-oflife phases of plastic production and waste. In this thesis, a Chlorella-dominated algae mixture is dried and …

Investigation Of Light Management Strategies And Photochemistry Of Si/Tio2 Tandem Microwire Slurries For Solar Hydrogen Generation., Saumya Gulati

Electronic Theses and Dissertations

The intermittent nature of the Sun makes it difficult to use it as a primary source of electricity and often needs to be supplemented by electricity from the grid which comes from fossil fuels. This motivates the need for solar energy storage. Photoelectrochemical (PEC) water-splitting has been explored as a means to convert solar energy into hydrogen (and oxygen), which can be stored as fuel. The current method of coupling PV and electrolyzer units has been widely commercialized, however, the cost of H₂ generated is far from the target of $1/kg set by the DOE under the Energy EarthShot …

Review Of Magnetic Properties And Texture Evolution In Non-Oriented Electrical Steels, Yizhou Du, Ronald J. O'Malley, Mario F. Buchely

Materials Science and Engineering Faculty Research & Creative Works

Electrical steels can be classified into two groups: grain-oriented (GO) and non-oriented (NGO) electrical steel. NGO electrical steels are mainly considered as core materials for different devices, such as electric motors, generators, and rotating machines. The magnetic properties and texture evolution of NGO electrical steels depend on multiple factors (such as chemical content, heat-treatment, and rolling process) making the development of new products a complex task. In this review, studies on the magnetic properties of NGO electrical steels and the corresponding texture evolution are summarized. The results indicate that further research is required for NGO electrical steels to ensure high …

A Hyperbaric Aerodynamic Levitator For Containerless Materials Research, Sydney E. Boland, Stephen K. Wilke, Jonathan A. Scott, Sarah M. Schlossberg, Alex Ivaschenko, Richard J.K. Weber, David W. Lipke

Materials Science and Engineering Faculty Research & Creative Works

A hyperbaric aerodynamic levitator has been developed for containerless materials research at specimen temperatures exceeding 2000 °C and pressures up to 10.3 MPa (1500 psi). This report describes the prototype instrument design and observations of the influence of specimen size, density, pressure, and flow rate on levitation behavior. The effect of pressure on heat transfer was also assessed by studying the heating and cooling behavior of levitated Al2O3 liquids. A threefold increase in the convective heat transfer coefficient was estimated as pressure increased to 10.3 MPa. The results demonstrate that hyperbaric aerodynamic levitation is a promising technique for containerless materials …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Metastability And Degradation In Cu(In,Ga)Se2 Thin-Film Solar Cells, Mohsen Jahandardoost

UNLV Theses, Dissertations, Professional Papers, and Capstones

Cu(In,Ga)(S,Se)2 or CIGS is a thin-film semiconductor that has shown a device efficiency of 23.35% and 24.2% for single-junction and perovskite/CIGS tandem solar cells, respectively. CIGS offers promising properties such as tunable bandgap and ease of processing making them great candidates for thin-film tandem devices. However, knowledge of the effect of material defects, buffer materials, and post-deposition treatment (PDT) on degradation and metastability behavior in these devices is not well understood.In this dissertation, metastability and long-term degradation of CIGS thin-film solar cells have been investigated under combinatorial stress factors of heat, light, and voltage bias to systematically understand the effect …

Low-Cost Microstereolithography 3d Printing With Microfluidic Microsampling Applications, Lauren Twombly

Chemistry & Biochemistry Undergraduate Honors Theses

The growing field of stereolithography 3D printing has welcomed a new age ofmicrofluidic device fabrication techniques. When compared to previous planar fabrication techniques such as soft-lithography, stereolithography 3D printing offers highly automated procedures, reduced fabrication times, and greater complexity of device features. To date, the greatest tradeoff for 3D printing in microfluidic device fabrication is poorer resolution when compared to soft-lithography which can produce feature sizes on the nanometer scale. The poorer resolution of 3D printing limits the feasible size of features. While highly sophisticated 3D printers are capable of achieving sub 10 μm resolution, these instruments are incredibly expensive …

Lignin Copolymer Property Prediction Using Machine Learning, Collin Larsen

Chemical Engineering Undergraduate Honors Theses

Lignin, an abundant biopolymer, is a waste byproduct of the paper and pulp industry. Despite its renewable nature and potential applicability in various products, such as plastics and composites, the development of lignin-based materials has been impeded by the cumbersome, Edisonian process of trial and error. This research proposes a novel approach to forecasting the properties of lignin-based copolymers by utilizing a recurrent neural network (RNN) based on the Keras models previously created by Tao et al. Example units of modified lignin were synthesized via esterification and amination functional group modifications. To increase the efficiency and accuracy of the prediction …

Separation Of Organic Acids Through Direct Catalysis From Sugars, Katelyn Robinson

Chemical Engineering Undergraduate Honors Theses

Society relies on plastic products, whether they are single use or durable. A downside of plastic is that the most common type is a product of oil and oil is not only a limited resource but also a climate-damaging resource. Polylactic acid (PLA) is a bio-based, biodegradable plastic. However, the process of converting biomass to polylactic acid polymer has the largest environmental impact of the PLA production process, so alternative methods of conversion are needed (Moretti et al., 2021). The polylactic acid polymer can be made with lactic acid, which can be converted from glucose.

Elucidating The Mechanical And Transport Properties Of Lignin-Based Hydrogel Composites, Nicholas Gregorich

All Dissertations

The use of lignin in the fabrication of soft composites has become an emerging area of research in polymer science and polymer chemistry. These lignin-based materials present numerous benefits, notably, a reduction in the use of petroleum-based precursor, improved structural benefits to otherwise soft host polymers, as well as the inherent antimicrobial and antioxidant properties of lignin, making it suitable for biomaterials. Herein, we present two chemical reaction pathways of incorporating lignin that was fractionated and cleaned using the Aqueous Lignin Purification with Hot Agents (ALPHA) process into poly(vinyl alcohol) (PVA) hydrogel composites for aqueous-based separations. By leveraging the ALPHA …

Molecular Dynamics Simulation On Molybdenum Disulfide: Thermal-Mechanical Properties And Phase Transitions Under External Loading, Mahabubur Rahman

All Dissertations

Due to their remarkable properties, transition metal dichalcogenides (TMDs) have received much scientific interest throughout the past decade. Two layers of chalcogen atoms (S, Se, Te) sandwich a layer of transition metal atoms (Mo, W, Ta) to form the three-atom thick unit cell in TMDs. The interaction between TMD "single layers" is mediated by neighboring chalcogen planes and bonded by Van der Waals forces. Due to this weak out-of-plane interaction, bulk samples can be thinned down to a single layer by exfoliation. Among the TMDs, Molybdenum Disulfide (MoS₂) shows promise in the field of electronics, optics, and sensing …

Mesoscale Modeling Of Controlled Degradation In Polymer Networks And Melts, Vaibhav Palkar

All Dissertations

Controlled degradation of polymers finds various applications in fields ranging from the design of functional soft materials to recycling of polymers. In several of these applications, the characteristic length scale at which relevant processes occur ranges from nanometers to microns, typically referred to as the mesoscale. Although analytical models and continuum approaches inform our current understanding, analysis of degradation at the mesoscale is exceptionally limited. For modeling degradation at the mesoscale, we use the Dissipative Particle Dynamics (DPD) technique and the LAMMPS simulation software. Within the DPD framework, we model controlled degradation or the breaking of covalent bonds within a …

Design Of A Miniature Robotic Surgery Technology Demonstration Payload For Orbital Spaceflight, Rachael A. Wagner

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This thesis describes the design of a technology demonstration payload that will test robotic surgery while aboard a 2024 expedition of the International Space Station (ISS). The payload utilizes a new miniature surgical robot to complete simulated surgical tasks on orbit, both autonomously and while remotely controlled by an Earth-based user. The experiment investigates the effects of microgravity and latency on robotic surgery, with the following goals:

1. Demonstrate the use of a miniature robotic surgical system in microgravity through performing simulated surgical tasks.

2. Quantify the effects of microgravity on robotic surgical techniques including forces, torques, and kinematic accuracy. …

Blood Flow Regulates Atherosclerosis Progression And Regression, Morgan A. Schake

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Atherosclerosis is the most prevalent pathology of cardiovascular disease with no known cure. Despite the many systemic risk factors for atherosclerosis, plaques do not form randomly in the vasculature. Instead, they form around bifurcations and the inner curvature of highly curving arterial segments that contain so-called disturbed blood flow that is low in magnitude and multidirectional over the cardiac cycle. Conversely, straight, non-bifurcated arterial segments that contain moderate-to-high and unidirectional (i.e., normal) blood flow are protected from plaque development. Thus, blood flow is a key regulator of atherosclerosis that may be able to be leveraged to develop new therapeutics. Towards …

Classification Of Electrical Current Used In Electroplastic Forming, Tyler Grimm

All Dissertations

Electrically assisted manufacturing (EAM) is the direct application of an electric current to a workpiece during manufacturing. This advanced manufacturing process has been shown to produce anomalous effects which extend beyond the current state of modeling of thermal influences. These purported non-thermal effects have collectively been termed electroplastic effects (EPEs).

While there is a distinct difference in results between steady-state (ideal DC) testing and pulsed current testing, the very definition of these two EAM methods has not been well established. A "long" pulse may be considered DC current; a "short" pulse may produce electroplastic effects; and even "steady-state" current shapes …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

Analytical And Experimental Investigation Of Interphase And Dispersion Effects On The Mechanical Stiffness Of Cellulose Nanocomposites, Will Goldberg

McKelvey School of Engineering Graduate Student Theses & Dissertations

The effect of dispersion and interphase properties on the elastic behavior of cellulose nanocomposites was investigated using a number of composite models, experimental data and a thorough literature review. Cellulose nanocomposites consisting of soy protein isolate (SPI) and cellulose nanocrystals (CNC) or polydopamine coated cellulose nanocrystals (PD-CNC) were prepared via solution casting method and tested for mechanical stiffness. These outcomes were compared to standard composite models as well as novel methods adapted from the literature that incorporate data regarding dispersion quality and interphase properties. The literature review verified that both dispersion and interphase properties are highly dependent on interfacial chemistry …

Structure-Property-Processing Analysis Of Graphene Bioscaffolds For Viability And Differentiation Of C2c12 Cells, Lynn Karriem

Boise State University Theses and Dissertations

We investigated the structure – property – processing correlation of graphene bioscaffolds produced using three different methods. Bioscaffolds were prepared by chemical vapor deposition (CVD), sublimation of Silicon Carbide (SiC), and printed solvent assisted exfoliated graphene ink. To gain insight into the roughness and topography of graphene, AFM was performed on each bioscaffold. Raman spectroscopy mapping demonstrated differences in the I_2D/I_G ratio for each scaffold. Young’s modulus was determined by nanoindentation and indicated that epitaxial graphene had the highest average stiffness, followed by CVD, with printed graphene demonstrating the lowest average stiffness. To investigate the biocompatibility of …

Black Phosphorus Ink Formulation For Aerosol Jet Printing, Florent Muramutsa

Boise State University Theses and Dissertations

As the demand for data-driven technologies such as cloud computing, artificial intelligence, and the Internet of Things increases, the value of data centers rises. However, the cost of optical interconnects that convert optical signals to electrical signals and vice versa limits the bandwidth in these data centers. Historically the optoelectronic materials of group III–V semiconductor materials are grown using epitaxy and transferred to silicon microelectronics using robotic pick-and-place technology. This costly method restricts the large-scale production of on-chip optoelectronic components such as diodes, photodetectors, and lasers. In this dissertation, we investigated the potential of black phosphorus (BP) as a material …

Kinetic Barriers For Leakage Reduction In Dna Autocatalytic Strand Displacement Networks, Drew Lysne

Boise State University Theses and Dissertations

Currently medical diagnostic methods suffer from the need for skilled labor, bulky, sophisticated and expensive equipment, ideal lab environments and ample time. A point-of-care biosensor can alleviate these problems and allow for more mobile disease detection. To meet this need, researchers have looked to DNA strand displacement networks to perform molecular level computation through a series of DNA strand displacement reactions in which disease associated biomarker inputs can trigger a cascaded signal to produce a readable output downstream in a matter of minutes. Such quick readable outputs require signal amplification. While amplification can be achieved through enzymatic activity, enzymes introduce …

Understanding And Tuning Magnetism In Van Der Waals Magnetic Compounds, Rabindra Basnet

Graduate Theses and Dissertations

The recently discovered two-dimensional (2D) magnetism has attracted intensive attention due to possible magnetic phenomenon arising from 2D magnetism and their promising potential for spintronics applications. The advances in 2D magnetism have motivated the study of layered magnetic materials, and further enhanced our ability to tune their magnetic properties. Among various layered magnets, tunable magnetism has been widely investigated in metal thiophosphates MPX3. It is a class of magnetic van der Waals (vdW) materials with antiferromagnetic ordering persisting down to atomically thin limit. Their magnetism originates from the localized moments due to 3d electrons in transition metal ions. So, their …

The Growth And Characterization Of Inn Quantum Dots Using Droplets Epitaxy In Mbe, Malak Refaei

Graduate Theses and Dissertations

III-nitride semiconductor material systems offer great potential for next-generation optoelectronic devices due to their direct bandgaps, which vary from 0.7 eV (InN) to 3.5 eV (GaN) to 6.2 eV (AlN), as well as their other unique properties. InN has gained much less attention than GaN and AlN within this family of semiconductors due to its complicated low-temperature growth. However, the prediction that an InN quantum well on GaN can become a two-dimensional (2D) topological insulator has resulted in expanding the research interest in InN. At the same time, this renewed interest has begun to reveal that the formation of an …

Measurements Of Magnetic Field Penetration Of Materials For Superconducting Radiofrequency Cavities, Iresha Harshani Senevirathne

Physics Theses & Dissertations

Superconducting Radio Frequency (SRF) cavities used in particle accelerators are typically formed from or coated with superconducting materials. Currently high purity niobium is the material of choice for SRF cavities which have been optimized to operate near their theoretical field limits. This brings about the need for significant R&D efforts to develop next generation superconducting materials which could outperform Nb and keep up with the demands of new accelerator facilities. To achieve high quality factors and accelerating gradients, the cavity material should be able to remain in the superconducting Meissner state under high RF magnetic field without penetration of quantized …

Nb3Sn Coating Of Twin Axis Cavity And Other Complex Srf Cavity Structures, Jayendrika Kumari Tiskumara

Physics Theses & Dissertations

In the field of Accelerator Science, for the low cost and increased quality factor, thin films coated niobium cavities are used in the modern SRF research. Within the potential substances, Nb₃Sn has shown higher critical temperature than niobium. Here the tin vapor diffusion method is used as the preferred technique to coat niobium cavities. So far, only elliptical cavities have been coated with Nb₃Sn and this technique has not yet been applied to cavities with complex geometries, which are also helpful in the accelerator science field. The Half-wave resonator could provide us data across frequencies of …

Preface To The Special Issue On Lithium-Sulfur Batteries, Jia-Jia Chen, Ren-Jie Chen, Zhong Jin

Journal of Electrochemistry

No abstract provided.

Development Of A Biobased Carbon Adsorbent For Treating Emerging Contaminants In Recycled Water On The International Space Station, Savanna Vacek, Madeline Carroll, Gabson Baguma

Undergraduate Research Symposium Posters

The International Space Station (ISS) operates as a closed system. Water is recycled from humidity and urine and held in a wastewater tank; part of the Water Processing Assembly (WPA). Potable treated water is used indirectly in the Sabatier Reactor.The Sabatier Reactor is a key component in the Environmental Control and Life Support System (ECLSS). Three main functions of ECLSS: water recovery, air revitalization, and oxygen generation Sabatier Reactor recently failed due to contamination of DMSO2, dimethyl sulfone, and DMSD, dimethylsilanediol. DMSO2 and DMSD are emerging contaminants that are not removed by the media used in the WPA due to …

Cobalt/Carbon Composites As Sulfur Hosts For High-Performance Lithium-Sulfur Batteries, Yun-Rui Yang, Huan-Huan Dong, Zhi-Qiang Hao, Xiang-Xi He, Zhuo Yang, Lin Li, Shu-Lei Chou

Journal of Electrochemistry

Lithium-sulfur (Li-S) battery is one of the promising energy storage devices because of its high energy density. However, the sulfur cathode suffers from sluggish electrochemical reaction kinetics, slow charge transfer, large volume expansion and severe shuttle effect of lithium polysulfides inevitably resulting in low reversible capacity, poor rate performance and short cycle life, limiting its practical applications. Herein, the recent progress of cobalt/carbon composites, including cobalt nanoparticles and cobalt single atoms, as the sulfur host materials in Li-S batteries is overviewed. In general, cobalt plays the role of electrocatalyst, which inhibits the shuttle effect of lithium polysulfides, accelerates the electrochemical …

Recent Advances Of Functional Electrolyte Additives For Lithium-Sulfur Batteries, Xiu-Qing Zhang, Shuai Tang, Yong-Zhu Fu

Journal of Electrochemistry

Lithium-sulfur (Li-S) batteries have become one of the most promising next-generation battery systems due to their high energy density and low cost. However, the application of Li-S batteries still faces critical challenges, such as the low conductivities of S and Li₂S, shuttle effect of polysulfides and dendrite growth of Li, etc. The optimization of the electrolyte can ameliorate the electrolyte|electrode interphase, conveniently regulating the parasitic reaction and improving the performance of the resultant batteries. The functional additives in electrolytes provide chances to tune the interphase and even the redox mechanism to improve the performance of the batteries. In …