Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2941 - 2970 of 16703

Full-Text Articles in Engineering

Cable⁃Stayed Bridge Of Cable Auxiliary Beam Arch Pylon ⁃Key Technologies Design Of Meishan Minjiang Bridge, Ma Zhendong, Lai Yaping, Chen Jiayong Jul 2023

Cable⁃Stayed Bridge Of Cable Auxiliary Beam Arch Pylon ⁃Key Technologies Design Of Meishan Minjiang Bridge, Ma Zhendong, Lai Yaping, Chen Jiayong

Journal of China & Foreign Highway

The newly built Minjiang Bridge in Meishan City, Sichuan Province applies the concept of cable-assisted girder bridge. P4 steel arch tower combined with three-stage balanced double-plane cable and P3 and P5 auxiliary towers combined with thin cable of single cable plane were used to assist the load on the beam body, making the 2.5 m-high concrete main beam meet the requirements of the main span of 2 × 120 m. Through the analysis of the bearing force, the angle between the double-limb arch tower was 43.6°, and two pairs of cables were set in the auxiliary tower to achieve the …

Go to article

Aesthetic Design Of Hechuan Qujiang Landscape Bridge, Zheng Guangqin, Chen Jiayong, Li Yue, Lai Yaping, Qiao Yunqiang Jul 2023

Aesthetic Design Of Hechuan Qujiang Landscape Bridge, Zheng Guangqin, Chen Jiayong, Li Yue, Lai Yaping, Qiao Yunqiang

Journal of China & Foreign Highway

Hechuan Qujiang Landscape Bridge is located at the junction of Qujiang River and Jialing River. It is a 1 × 400 m simple supported single-cable surface ground anchor suspension bridge. The main girder is a steel box girder arranged with curved branches. One side is the highway system to meet the needs of motor vehicles across the river, and the other side is the greenway system to meet the needs of pedestrians and non-motor vehicles. In the design process, the aesthetic design of the bridge was fully studied from four aspects: environment aesthetics, structure aesthetics, function aesthetics, and form aesthetics. …

Go to article

Study On Optimal Layout Of Cross ⁃Diaphragm In Oblique Small Box Girder, Mai Xinhao Jul 2023

Study On Optimal Layout Of Cross ⁃Diaphragm In Oblique Small Box Girder, Mai Xinhao

Journal of China & Foreign Highway

In order to determine the optimal layout of the cross⁃diaphragms in the oblique small box girder, a prestressed concrete small box girder bridge with a 50 m span was taken as the research object, and its internal force under the load of the moving beam was numerically simulated and measured. First, the model was modified according to the measured stress data, and the maximum distance between the cross⁃diaphragms was determined by using the warping-limited normal stress. Then, the height and thickness of the middle cross⁃diaphragms were determined according to the deflection difference coefficient of the bridge span. Finally, according to …

Go to article

Non⁃Gaussian Features Of Fluctuating Wind Pressures Under Combined Axle Condition, Chen Zhiqiang Jul 2023

Non⁃Gaussian Features Of Fluctuating Wind Pressures Under Combined Axle Condition, Chen Zhiqiang

Journal of China & Foreign Highway

In view of the non-Gaussian characteristics of wind pressure on the train surface of a typical high-speed railway train and bridge system, the Gaussian variable was expressed as a Hermite polynomial considering non-Gaussian variables by using Hermite series expansion method, and the probability density curve and peak factor of train surface were analyzed. The results show that the Davenport peak factor based on Gaussian distribution obviously underestimates the non-Gaussian peak factor, and its probability density curve deviates from the actual curve of the measuring point. The Hermite series peak factor method based on the modified method takes into account the …

Go to article

Application Of 3d Reconstruction Model In Inspection Of Bridge Apparent Defects, Xu Guangli, Li Shaoyong, Tang Jun, Liu Shuqi, Zhou Yin Jul 2023

Application Of 3d Reconstruction Model In Inspection Of Bridge Apparent Defects, Xu Guangli, Li Shaoyong, Tang Jun, Liu Shuqi, Zhou Yin

Journal of China & Foreign Highway

In view of problems such as low efficiency, poor accuracy, and imprecise three-dimensional (3D) location of defects in apparent defect inspection of bridges, this paper proposed a method for apparent defect inspection of bridges based on a 3D reconstruction model. By taking the indoor rectangular beam as the object, a three-dimensional bridge model was established, and its accuracy was verified. Then, based on the point cloud data derived from the model, a program was written in Python to realize the identification, measurement, and parameter derivation of apparent defects of bridges. Dade Bridge in Kunming, Yunnan Province was set as the …

Go to article

Design And Construction Of Steel Caisson For Inclined Pilecap Of Beitstadsund Bridge In Norway, Yang Dingjun Jul 2023

Design And Construction Of Steel Caisson For Inclined Pilecap Of Beitstadsund Bridge In Norway, Yang Dingjun

Journal of China & Foreign Highway

At present, the underwater bridge foundation construction technology in China and abroad has been relatively mature, but the different geographical environments, hydrogeological conditions, the form of basic structure, and the available construction equipment lead to different construction schemes and technologies. The Beitstadsund Bridge in Norway is located near the Arctic Circle in central Norway and across the strait. In the design and construction of the deep-water steel cofferdam of the inclined steel pile cap for the bridge, the overall installation of the steel cofferdam was realized by setting the cofferdam support on the inclined steel pipe group, the overall positioning …

Go to article

Study On Correction Method Of Cable Length Error In Construction Control Of Cable ⁃Stayed Bridges, Huang Gen, Chen Changsong Jul 2023

Study On Correction Method Of Cable Length Error In Construction Control Of Cable ⁃Stayed Bridges, Huang Gen, Chen Changsong

Journal of China & Foreign Highway

In order to effectively correct the stay cable length error during the construction of the cable-stayed bridge, this paper proposed a correction method with the exposure of the sockets as the error control index and analyzed the influence of the elastic modulus, temperature effect, and anchor point coordinates of the cable on the cable length error from the perspective of construction control. Then, error correction was achieved by adjusting the position of the manufacturing cable length and the nut at the anchor end. The results of application in Jiayu Yangtze River Highway Bridge show that this method can improve the …

Go to article

Analysis Of Mechanical And Deformation Characteristics Of Karst Tunnel Structure And Research On Treatment Technology, Huang Haifeng, Chang Zhenchao, Luo Junhui, Zhou Xiang, Ceng Fuquan, Tian Fapai Jul 2023

Analysis Of Mechanical And Deformation Characteristics Of Karst Tunnel Structure And Research On Treatment Technology, Huang Haifeng, Chang Zhenchao, Luo Junhui, Zhou Xiang, Ceng Fuquan, Tian Fapai

Journal of China & Foreign Highway

Combined with the construction process of Nongmo Karst Tunnel on Du’an–Bama Expressway, this paper used Midas-GTS finite element calculation software to conduct numerical simulation research on the stability of surrounding rock and treatment structure of tunnel with karst caves on either side, analyzed the influence of tunnel excavation on the stress and deformation characteristics of surrounding rock and supporting structure, and probed into the treatment effect of biased wall and root pile on the treatment of karst tunnel. The results show that the surrounding rock at the bottom of the tunnel, the top of the composite foundation, and the top …

Go to article

Effect Of Temperature And Light On Characteristics Of Asphalt Emissions, Zhu Xuwei, Tian Bo Jul 2023

Effect Of Temperature And Light On Characteristics Of Asphalt Emissions, Zhu Xuwei, Tian Bo

Journal of China & Foreign Highway

In order to study the effects of temperature and light on the characteristics of asphalt emissions, atmospheric pressure chemical ionization–time-of-flight mass spectrometer (APCI‑TOF MS) and electron impact ionization mass spectrometry (EI‑MS) were used to quantitatively characterize the composition information of PG 62-22 asphalt emissions at different temperatures (40–200 °C). The effects of different temperatures and light on total emission factor, SOA conversion factor, intermediate volatile organic compound (IVOC)/semi-volatile organic compound (SVOC) volume fraction, and aromatics volume fraction of asphalt emissions were studied. The results show that the components of asphalt emissions change with temperature, and the components are complex and …

Go to article

Study On Triaxial Mechanical Properties Of Glass Fiber Reinforced Cement Soil In Short Age, Wang Wei, Dai Mengdan, Yu Wenjie Jul 2023

Study On Triaxial Mechanical Properties Of Glass Fiber Reinforced Cement Soil In Short Age, Wang Wei, Dai Mengdan, Yu Wenjie

Journal of China & Foreign Highway

In order to evaluate the improvement effect of fiber on the brittle damage of cement soil, a triaxial unconsolidated undrained (UU) test was carried out on glass fiber cement soil (GCS) with a curing age of 7 d and a mass fraction of glass fiber (GF) of 0, 2‰, 4‰, 6‰, and 8‰, respectively. The results show that: ① GCS retains the original strain softening characteristics of cement soil; ② For the same mass fraction of GF, the peak stress, peak strain, and residual strength of GCS samples increase gradually with the increase in confining pressure, but the brittleness index …

Go to article

Study On Experimental Application Of Xinjiang Steel Slag In Cement Stabilized Base, Chen Wei, Yu Haiming, Li Qian, Huang Yong, Si Yi Jul 2023

Study On Experimental Application Of Xinjiang Steel Slag In Cement Stabilized Base, Chen Wei, Yu Haiming, Li Qian, Huang Yong, Si Yi

Journal of China & Foreign Highway

Based on the experimental study of Xinjiang steel slag in cement-stabilized base, the physical and chemical characteristics of steel slag were analyzed, and the unconfined compressive strength, splitting strength, and dry shrinkage performance of cement-stabilized steel slag and gravel mixture with different cement dosages (4% and 5%) and steel slag contents (30%, 40%, and 60%) were analyzed. The test results show that steel slag can be used as a good engineering aggregate in a cement-stabilized base, and with the addition of steel slag, the unconfined compressive strength and splitting strength of steel slag and gravel mixture are increased to varying …

Go to article

Mechanical Properties And Micro Analysis Of Cement Stabilized Steel Slag Macadam Base, Wan Tianbao Jul 2023

Mechanical Properties And Micro Analysis Of Cement Stabilized Steel Slag Macadam Base, Wan Tianbao

Journal of China & Foreign Highway

With steel slag as coarse aggregate, cement-stabilized steel slag macadam base material was designed and prepared by selecting three kinds of cement dosage and three kinds of steel slag content. The mechanical properties of cement-stabilized steel slag macadam base were studied through compaction and unconfined compressive strength tests, and XRD and SEM microscopic tests were carried out to analyze the mineral composition and microscopic morphology of steel slag and mixture and clarify the internal mechanism of hydration product formation and microstructure and strength formation. The results show that the maximum dry density and optimum moisture content of cement-stabilized steel slag …

Go to article

Analysis Of Influence Of Moisture Content ⁃Temperature Dual Factor On Mechanical Properties Of Red Clay, Wang Jiangtao, Bao Temenbaiyila, Yang Weiguang, Zhou Qi, Fu Helin Jul 2023

Analysis Of Influence Of Moisture Content ⁃Temperature Dual Factor On Mechanical Properties Of Red Clay, Wang Jiangtao, Bao Temenbaiyila, Yang Weiguang, Zhou Qi, Fu Helin

Journal of China & Foreign Highway

Under the new climatic environment and engineering construction requirements, engineering problems involving red clay are becoming more and more prominent, and it is urgent to deeply grasp the mechanical and engineering properties of residual slope red clay. The typical red clay in Hunan Province was studied in this paper. Based on the unconsolidated undrained direct shear test, this paper studied the mechanical properties of residual slope red clay under the influence of moisture content and temperature, focusing on the most unfavorable conditions affecting the mechanical properties of red clay. The results show that: ① The shear strength of red clay …

Go to article

Traffic Conflict Analysis Of Multila Neexpressway Based On Simulation, Ceng Yuekai, Zhou Tao, Chen Yazhen Jul 2023

Traffic Conflict Analysis Of Multila Neexpressway Based On Simulation, Ceng Yuekai, Zhou Tao, Chen Yazhen

Journal of China & Foreign Highway

In order to prevent traffic accidents on multi-lane expressways, the VISSIM traffic simulation model was established based on three types of multi-lane traffic conflicts: mixed passenger and cargo type, separated passenger and cargo type, and separated main and auxiliary type. SSAM software was used to obtain traffic conflict data, and the form, quantity, and location of the conflicts were analyzed. The results show that traffic conflicts are the most under the mixed passenger and cargo type, which are mainly distributed in the upper 100 m range of the innermost lane, outermost lane, and deceleration lane. The traffic conflicts under the …

Go to article

Risk Analysis Of Highway Nighttime Maintenance Operation Based On Sem, Fan Jinhua, Zou Leping, Qi Shaoren, Tian Zhen Jul 2023

Risk Analysis Of Highway Nighttime Maintenance Operation Based On Sem, Fan Jinhua, Zou Leping, Qi Shaoren, Tian Zhen

Journal of China & Foreign Highway

In order to analyze the factors affecting the risk of nighttime expressway maintenance operation and quantitatively assess the degree of influence of various factors on the risk of nighttime maintenance operation, this paper extracted five first-level indicators and 36 second-level indicators that affect the risk of operation through literature review, accident data, and questionnaire survey and built an evaluation system. The first-order and second-order confirmatory factor analysis models were constructed by using a structural equation model (SEM) based on 343 questionnaires of the nighttime maintenance operation risks. The results show that the driver factor has the greatest effect on the …

Go to article

Study On Effectiveness Evaluation Method Of Expressway Drainage System In Rainy Area, Luo Datian, Li Jiayi, Zou Jingrong Jul 2023

Study On Effectiveness Evaluation Method Of Expressway Drainage System In Rainy Area, Luo Datian, Li Jiayi, Zou Jingrong

Journal of China & Foreign Highway

In order to comprehensively evaluate the effectiveness of expressway drainage systems in rainy areas and comprehensively analyze the factors affecting the effectiveness of drainage systems, this paper took the perfection of drainage system, stability of drainage facilities, and road traffic safety as the first-level evaluation index and six kinds of influencing factors such as the degree of integrity as the second-level index, and it put forward the evaluation criteria of the effectiveness of expressway drainage system in rainy areas. The fuzzy comprehensive evaluation method was used to determine the membership degree of expert scoring through the trapezoid membership function, and …

Go to article

Research On Crack And Permeability Characteristics Of Cement ⁃Modified Expansive Soil Under Dry ⁃Wet Cycles, Bao Guiyong, Xu Yangshaojun, Jiang Zhijie, Rong Hongliu, Wang Jinlong Jul 2023

Research On Crack And Permeability Characteristics Of Cement ⁃Modified Expansive Soil Under Dry ⁃Wet Cycles, Bao Guiyong, Xu Yangshaojun, Jiang Zhijie, Rong Hongliu, Wang Jinlong

Journal of China & Foreign Highway

In order to study the engineering permeability characteristics of cement-modified expansive soil under dry and wet cycles, the mix ratio of cement-modified expansive soil was designed, and the orthogonal design test method was adopted. Image analysis software PACS, unconfined compressive strength test, and laboratory permeability test were used to study the crack development, strength attenuation characteristics, and permeability changes of cement-modified expansive soil under dry and wet cycle conditions. The results show that soil permeability and strength are greatly affected by the number of dry and wet cycles. Under the condition of dry and wet cycles, the moisture content of …

Go to article

Local Chlorhexidine Delivery For Periodontal Infection Therapy: A Short Review, Muhammad Guruh Najmudin, Azizah Intan Pangesty, Rini Riastuti, Sunarso Sunarso, Abdul Halim Abdullah Jul 2023

Local Chlorhexidine Delivery For Periodontal Infection Therapy: A Short Review, Muhammad Guruh Najmudin, Azizah Intan Pangesty, Rini Riastuti, Sunarso Sunarso, Abdul Halim Abdullah

Journal of Materials Exploration and Findings

Oral diseases affected more than half of the world’s population. Periodontitis is the second biggest threat to oral health after dental caries. Periodontitis is an inflammation inside periodontal pockets caused by pathogenic microbial colonies which lead to destruction of bone tissue and soft tissue. Chlorhexidine gluconate is an antimicrobial agent that effective to destroy pathogenic microbial and cure periodontitis. Chlorhexidine gluconate is given locally using a carrier material to the infected area. There are several materials that can be used to deliver Chlorhexidine gluconate to the infected periodontal tissue such as gel, liquid (mouthwash), and chip. This short review aims …

Go to article

Optimization Of Alti Pld Coating By Increasing Ti Content, N2 And Annealing Which Used For Skd61 Pins In Aluminum Die Casting, Rusman Kosasih, Maria Margaretha Suliyanti Prof, Dedi Priadi, Wisnu Usni Jul 2023

Optimization Of Alti Pld Coating By Increasing Ti Content, N2 And Annealing Which Used For Skd61 Pins In Aluminum Die Casting, Rusman Kosasih, Maria Margaretha Suliyanti Prof, Dedi Priadi, Wisnu Usni

Journal of Materials Exploration and Findings

The Alumunium Titanium Nitrogen (AlTiN) coating is known as one of the best coating materials for protective coating, while Pulsed Laser Deposition (PLD) is a laser coating process used for electric layer and superconductor applications, producing thin films up to 20 µm in thickness. The combination of these two matters has already been researched and is still in progress. One major challenge in the aluminium casting industry is to minimize the damage caused to tool steel pins made from SKD61, when aluminium material sticks to the pin, and halting production. Therefore, research on effective coatings for tool steels and testing …

Go to article

Effect Of Heat Input On Microstructure And Mechanical Properties Of Submerged Arc Welded Sm570-Tmc Steel, Toni Yuhandri, Winarto Winarto, Diana Natalia Jul 2023

Effect Of Heat Input On Microstructure And Mechanical Properties Of Submerged Arc Welded Sm570-Tmc Steel, Toni Yuhandri, Winarto Winarto, Diana Natalia

Journal of Materials Exploration and Findings

SM570TMC is high-strength steel (HSS), which is commonly used in structures that require higher-strength components. In this research, submerged arc welding (SAW)-welded SM570 TMC steels' microstructure and mechanical characteristics were examined. SM570 plates with 12mm thickness were multi-pass welded by using a 3.0 mm diameter of ESAB OK Autrod 13.40 (AWS A5.23: EG) filler metal. The joint design is a single V multi-pass butt weld with a backing strip. Two welded joints were prepared by using heat inputs of 2.2 and 2.9 kJ/mm. The microstructures of two welded joints were observed by using optical microscopy and scanning electron microscope (SEM). …

Go to article

The Effect Of Current Density And Hard Chrome Coating Duration On The Mechanical And Tribological Properties Of Aisi D2 Steel, Indah Uswatun Hasanah, Dedi Priadi, Donanta Dhaneswara Jul 2023

The Effect Of Current Density And Hard Chrome Coating Duration On The Mechanical And Tribological Properties Of Aisi D2 Steel, Indah Uswatun Hasanah, Dedi Priadi, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The effect of hard chromium coating on AISI D2's mechanical properties and wear resistance has been investigated using the electrolysis technique with varying current and coating duration. The variations of current used are 0.8 A, 1.2 A, and 1.6 A, while the coating duration used are 300, 600 and 900 seconds. Characterization of the films was conducted using SEM-EDS, and XRD. It can be observed from SEM characterization that the chrome grains resulted from the electroplating process are fine. The XRD identify chrome compund on the surface coating. The highest hardness value was 520.6 HV on a sample with a …

Go to article

Calibration Of The Johnson–Cook Model At High Temperatures For An Ultra-High Strength Crnimov Steel, Mario F. Buchely, S. Chakraborty, V. Athavale, Laura Bartlett, Ronald J. O'Malley, D. Field, K. Limmer, K. Sebeck Jul 2023

Calibration Of The Johnson–Cook Model At High Temperatures For An Ultra-High Strength Crnimov Steel, Mario F. Buchely, S. Chakraborty, V. Athavale, Laura Bartlett, Ronald J. O'Malley, D. Field, K. Limmer, K. Sebeck

Materials Science and Engineering Faculty Research & Creative Works

This paper presents a study on the thermo-mechanical behavior of an ultra-high strength CrNiMoV steel at high temperatures and medium strain rates through hot tensile tests. The material was examined in two conditions: as-cast/heat-treated (AC/HT) and as-rolled (AR). Tensile tests were conducted at temperatures of 800,900,1000,1100, and 1200°C, and strain rates of 0.1,1, and 10s−1. Inclusion and porosity analysis was also performed on the tensile specimens. The results revealed that the flow stress decreased by approximately 70% on average from 800°C to 1200°C, while increasing by approximately 32% on average from 0.1s−1 to 10s−1 in strain rate. The elongation exhibited …

Go to article

The Effect Of Heat Treatment And Chemical Treatment On Natural Fibre To The Durability Of Wood Plastic Composites – A Review, Nuratiqah Asyiqin Mohd Nasharudin, Nur Fatihah Sulaiman, Nurul Aziemah Mohammad, Wan Nor Raihan Wan Jaafar, Falah Abu Dr., Siti Norasmah Surip Jul 2023

The Effect Of Heat Treatment And Chemical Treatment On Natural Fibre To The Durability Of Wood Plastic Composites – A Review, Nuratiqah Asyiqin Mohd Nasharudin, Nur Fatihah Sulaiman, Nurul Aziemah Mohammad, Wan Nor Raihan Wan Jaafar, Falah Abu Dr., Siti Norasmah Surip

Journal of Materials Exploration and Findings

The application of WPC is not only limited to indoor applications but has been extended to exterior applications where properties of WPC could compromise during service life. WPC was derived from wood fiber of various sizes to reinforce polymers. Wood fiber has the advantage of a cheaper price, being abundantly available, and ease of processing, however, the critical factor is its hydrophilic nature, where moisture absorption is likely to occur. Thus, treatments for reducing the hydrophilicity of wood fibers are applied. By treatment of wood fiber, the surface impurities were removed, leaving the roughened surface of fibers, thus providing a …

Go to article

A Strong And Ductile Cobalt-Free Solid-Solution Fe30ni30mn30cr10 Multi-Principal Element Alloy From Hot Rolling, Hans Pommerenke, Jiaqi Duan, Nathan Curtis, Victor Delibera, Adam Bratten, Andrew Hoffman, Mario F. Buchely, Ronald J. O'Malley, Haiming Wen Jul 2023

A Strong And Ductile Cobalt-Free Solid-Solution Fe30ni30mn30cr10 Multi-Principal Element Alloy From Hot Rolling, Hans Pommerenke, Jiaqi Duan, Nathan Curtis, Victor Delibera, Adam Bratten, Andrew Hoffman, Mario F. Buchely, Ronald J. O'Malley, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Most of the Face-Centered Cubic (FCC) Multi-Principal Element Alloys (MPEAs) Developed Thus Far Contain Cobalt. for Many Applications, it is Either required or Beneficial to Avoid Cobalt, Since Cobalt Has Long-Term Activation Issue (For Nuclear Applications), is Expensive, and is Considered a Critical Material. in Addition, FCC Structured Solid-Solution MPEAs Tend to Have Relatively Low Strength. a FCC Solid-Solution Fe30Ni30Mn30Cr10 (At %) MPEA Was Fabricated Via Arc Melting, Followed by Homogenization at 1100 °C for 12 H. the Alloy Was Hot Rolled at 1100 °C with a Total Reduction of Up to 97 %. the Microstructure Was Characterized and Mechanical …

Go to article

A Strong And Ductile Cobalt-Free Solid-Solution Fe30ni30mn30cr10 Multi-Principal Element Alloy From Hot Rolling, Hans Pommerenke, Jiaqi Duan, Nathan Curtis, Victor Delibera, Adam Bratten, Andrew Hoffman, Mario Buchely, Ronald O'Malley, Haiming Wen Jul 2023

A Strong And Ductile Cobalt-Free Solid-Solution Fe30ni30mn30cr10 Multi-Principal Element Alloy From Hot Rolling, Hans Pommerenke, Jiaqi Duan, Nathan Curtis, Victor Delibera, Adam Bratten, Andrew Hoffman, Mario Buchely, Ronald O'Malley, Haiming Wen

Materials Science and Engineering Faculty Research & Creative Works

Most of the face-centered cubic (FCC) multi-principal element alloys (MPEAs) developed thus far contain cobalt. for many applications, it is either required or beneficial to avoid cobalt, since cobalt has long-term activation issue (for nuclear applications), is expensive, and is considered a critical material. in addition, FCC structured solid-solution MPEAs tend to have relatively low strength. an FCC solid-solution Fe30Ni30Mn30Cr10 (at %) MPEA was fabricated via arc melting, followed by homogenization at 1100 °C for 12 h. the alloy was hot rolled at 1100 °C with a total reduction of up to 97 %. the microstructure was characterized, and mechanical …

Go to article

Enhanced Degradation Of Methyl Orange And Trichloroethylene With Pnipam-Pmma-Fe/Pd-Functionalized Hollow Fiber Membranes, Rollie Mills, Cameron Tvrdik, Andrew Lin, Dibakar Bhattacharyya Jul 2023

Enhanced Degradation Of Methyl Orange And Trichloroethylene With Pnipam-Pmma-Fe/Pd-Functionalized Hollow Fiber Membranes, Rollie Mills, Cameron Tvrdik, Andrew Lin, Dibakar Bhattacharyya

UK CARES Faculty Publications

Trichloroethylene (TCE) is a prominent groundwater pollutant due to its stability, widespread contamination, and negative health effects upon human exposure; thus, an immense need exists for enhanced environmental remediation techniques. Temperature-responsive domains and catalyst incorporation in membrane domains bring significant advantages for toxic organic decontamination. In this study, hollow fiber membranes (HFMs) were functionalized with stimuli-responsive poly-N-isopropylacrylamide (PNIPAm), poly-methyl methacrylate (PMMA), and catalytic zero- valent iron/palladium (Fe/Pd) for heightened reductive degradation of such pollutants, utilizing methyl orange (MO) as a model compound. By utilizing PNIPAm’s transition from hydrophilic to hydrophobic expression above the LCST of 32 ◦C, increased pollutant diffusion …

Go to article

Nonmonotonic Effect Of Chemical Heterogeneity On Interfacial Crack Growth At High-Angle Grain Boundaries In Fe-Ni-Cr Alloys, Yuchu Wang, Bita Ghaffari, Christopher Taylor, Simon Lekakh, Carlos Engler-Pinto, Larry Godlewski, Yang Huo, Mei Li, Yue Fan Jul 2023

Nonmonotonic Effect Of Chemical Heterogeneity On Interfacial Crack Growth At High-Angle Grain Boundaries In Fe-Ni-Cr Alloys, Yuchu Wang, Bita Ghaffari, Christopher Taylor, Simon Lekakh, Carlos Engler-Pinto, Larry Godlewski, Yang Huo, Mei Li, Yue Fan

Electrical and Computer Engineering Faculty Research & Creative Works

An intermittent pattern is observed in the modeling of interfacial cyclic-loading crack growth at high-angle grain boundaries in ternary Fe-Ni-Cr alloys. Different from conventional wisdom of stress-intensity factor, the abrupt crack advances are found driven by extreme value statistics - namely, the aggregation of atoms with most compressive residual stresses. In addition, inherently non-affine atomic stress fluctuations are discovered, and the fluctuations peak at intermediate level of chemical heterogeneity, causing the fastest crack growth. Implications of such nonmonotonic mechanism in regard to the origin of intermediate-temperature embrittlement phenomena are also discussed.

Go to article

The Plastics Collection Reference Packet, Special Collections Research Center Jul 2023

The Plastics Collection Reference Packet, Special Collections Research Center

Special Collections Research Center

This reference packet is an informational tool to support further research into the history of plastics—whether interested in companies, individuals within the plastics industry's history, historical plastics materials, essays, and more. All content featured within this packet was previously published on the former plastics.syr.edu website as part of a Syracuse University Libraries and Special Collections Research Center (SCRC) partnership established in 2007 with the Plastics Pioneers Association (PPA)—an association of plastics industry professionals interested in preserving the plastics industry's past.

Go to article

Engineering Heterogeneous Nucleation During Solidification Of Multiphase Cast Alloys: An Overview, Simon (Semen) N. Lekakh, Jingjing Qing Jul 2023

Engineering Heterogeneous Nucleation During Solidification Of Multiphase Cast Alloys: An Overview, Simon (Semen) N. Lekakh, Jingjing Qing

Materials Science and Engineering Faculty Research & Creative Works

The theory of heterogeneous nucleation was initially developed as a part of condensed matter physics, and later it was used as an important engineering tool to design metallurgical processes. This success has led to wide applications of the theory in metallurgical practice. For example, engineering heterogeneous nucleation in ductile iron has been used to reduce shrinkage defects, suppress cementite formation, and modify the size and shape of microstructural constituencies. This demonstrates how theoretical knowledge could benefit industry practice. This overview aims to summarize the authors' published studies in co-authorship with colleagues and students, which covers different aspects of engineering heterogeneous …

Go to article

Neurocomputing And Interfacing Digital Tasting System: Research, Design, And Evaluation, Amira J. Zaylaa, Ahmad El Hajj Jun 2023

Neurocomputing And Interfacing Digital Tasting System: Research, Design, And Evaluation, Amira J. Zaylaa, Ahmad El Hajj

BAU Journal - Science and Technology

The continuous evolution in computing and interfacing has been extended to develop multi-sensory experiences in many domains such as neurological, auditory, vision, and haptic domains. So far, only a few remarkable system approaches have been approved to be serving the taste sensation digitally. Although taste sensation is linked to the brain, there is a lack of optimal neurocomputing digital taste sensation systems. Our study provides a new neurocomputing method to digitally stimulate the sense of taste by electrical stimulation on the human tongue. We aim to link chemical stimulation and electrical stimulation in order to design an electronic interface for …

Go to article

First Prev Next Last