Engineering Commons^™

Development, 3d Printing, And Sintering Of Aluminum-Magnesium Alloy Pastes For In-Space Manufacturing Applications, Fatou Ndiaye

Electronic Theses and Dissertations

This study explores the additive manufacturing process of paste printing, sintering, and de-binding for fabricating aluminum-magnesium alloy components. The paste formulation involved combining aluminum powder with varying magnesium concentrations, utilizing acrylic polyol, solvent, and plasticizer to create a homogeneous mixture. Printing parameters were optimized to ensure continuous pressure for improved extrusion. Sintering conditions involved incremental temperature increases with nitrogen flow to remove solvents. Density measurements, tensile tests, and shrinkage calculations were conducted to assess part quality post-sintering. The study revealed significant improvements in part quality with 5 wt.% magnesium incorporation within aluminum, although density and tensile strength fell short of …

Layered Structure Protonic Ceramic Conductors Of The Form Ba5in2+Xal2zr1-Xo13-Δ, Nathan Cretegny

All Theses

In this work, the hexagonal perovskite of targeted composition Ba₅In_2+xAl₂Zr_1-xO₁₃ (x=0, 0.1, 0.2) was synthesized via a solid-state synthesis route to study the impact of oxygen vacancy concentration in layered hexagonal perovskites. Precursor oxides were mixed in stoichiometric proportions, calcined between 800-1200℃ and sintered at 1475℃. The sintered pellets were crushed into fine powders to investigate the chemistry and structure through X-ray diffraction, neutron diffraction, inductively coupled plasma mass spectrometry, and nuclear magnetic resonance. Dense pellets were used to study conductivity properties using electrochemical impedance spectroscopy.

The synthesis approach produced 100% …

The Epitaxial Growth Of Ge And Gesn Semiconductor Thin Films On C-Plane Sapphire, Emmanuel Wangila, Calbi Gunder, Petro M. Lytvyn, Mohammad Zamani-Alavijeh, Fernando Maia De Oliveira, Serhii Kryvyi, Hryhorii Stanchu, Aida Sheibani, Yuriy I. Mazur, Shui-Qing Yu, Gregory J. Salamo

Physics Faculty Publications and Presentations

Ge_1−xSn_x growth on a new sapphire platform has been demonstrated. This involved the growth of GeSn on Ge/GaAs layers using the algorithm developed. The resultant growths of Ge on GaAs/AlAs/sapphire and Ge_1−xSn_x on Ge/GaAs/AlAs/sapphire were investigated by in situ and ex situ characterization techniques to ascertain the surface morphology, crystal structure, and quality. The growth mode of Ge on GaAs was predominantly two-dimensional (2D), which signifies a layer-by-layer deposition, contributing to enhanced crystal quality in the Ge/GaAs system. The growth of Ge_1−xSn_x with 10% Sn on a graded profile for 30 …

Revealing The Three-Dimensional Arrangement Of Polar Topology In Nanoparticles, Chaewa Jeong, Juhyeok Lee, Hyesung Jo, Jaewhan Oh, Hionsuck Baik, Kyoung-June Go, Junwoo Son, Si-Young Choi, Sergey Prosandeev, Laurent Bellaiche, Yongsoo Yang

Physics Faculty Publications and Presentations

In the early 2000s, low dimensional ferroelectric systems were predicted to have topologically nontrivial polar structures, such as vortices or skyrmions, depending on mechanical or electrical boundary conditions. A few variants of these structures have been experimentally observed in thin film model systems, where they are engineered by balancing electrostatic charge and elastic distortion energies. However, the measurement and classification of topological textures for general ferroelectric nanostructures have remained elusive, as it requires mapping the local polarization at the atomic scale in three dimensions. Here we unveil topological polar structures in ferroelectric BaTiO₃ nanoparticles via atomic electron tomography, which …

Additive Manufacturing With Bioresorbable Polymers: Process-Structure-Property Relationships For Biomimetic Tissue Scaffolds, Clayton Joseph Culbreath

All Dissertations

Tissue engineering has a base requirement of scaffold structures to support cell growth, proliferation, and regeneration. However, attempts to use artificial scaffold structures have often fallen short of clinical needs to justify the change away from the established, biologic-based current standard of care. Based on the limited number of successful tissue scaffolds produced by material extrusion modes of additive manufacturing, fused filament 3d printing and electrospinning, critical design specifications for a tissue scaffold are six minimum requirements: 1) biocompatibility, 2) porosity, 3) mechanical properties, 4) bioresorbable medical grade materials, 5) bioactivity, and 6) appropriately scaled production methods compliant with medical …

Machine Learning Assisted Discovery Of High-Performance Perovskites For Hydrogen Production, Ximei Zhai

All Dissertations

Hydrogen has significantly contributed to the global energy transition as a clean energy carrier. However, traditional hydrogen production involves energy-intensive processes with heavy carbon emissions. High-temperature water splitting to generate hydrogen has become a promising route for clean hydrogen production. Directly utilizing concentrated solar heat to perform solar thermochemical hydrogen (STCH) production is considered one of the most eco-friendly hydrogen production options. At the same time, high-temperature electrolysis in protonic ceramic electrolysis cells (PCECs) can efficiently utilize intermittent and cost-effective renewable electricity to produce hydrogen. Perovskite oxides with good redox capability and tolerance for oxygen deficiency are considered the most …

Volatile Crystalline Semiconductor Core Fibers, Thomasina Zaengle

All Dissertations

Optical fibers play critical roles across many facets of everyday life from communications to e-commerce to sensing and security. The ubiquity of optical fibers arises from their intrinsic clarity and, as glasses, their ability to be thermally drawn at high speeds over long distances when suitably heated about their glass transition temperature. Sixteen years ago, the first thermally drawn crystalline core fibers were fabricated using the molten core method, whereby a melt is confined within a glass capillary tube that is then drawn to fiber. This opened the door to crystalline semiconductor core fibers, which are now the backbone of …

Tin-Silver As A Novel Biodegradable Metallic Biomaterial, Charley Goodwin

All Dissertations

The Essure device is a non-hormonal, minimally-invasive, permanent female sterilization implant, removed from the market due to an increase in adverse events, hypothesized to be caused by corrosion of the Sn-Ag component of the implant. The goals of this dissertation were to first develop implant retrieval methods for Essure devices and surrounding tissue, documenting signs of degradation and metallic degradation products, then to characterize the electrochemical behavior of Sn-Ag in biologically representative environments and finally, to assess the biological interaction of Sn-Ag. Retrieval analyses developed successful methods, qualifying the degree of corrosion, primarily of the Sn-Ag component and finding Sn …

Synthesis Of Bimetallic Nickel And Cobalt Phosphide Nanostructures For Electrocatalysis, Sarah Meixin York

Graduate Theses and Dissertations

Transition metal phosphides have become a new class of materials to be considered as promising catalysts for a number of applications including electrochemical hydrogen evolution (HER). Electrocatalysis in hydrogen evolution is a heavily studied field due to the increasing desire to develop more efficient and more cost-effective catalysts for clean hydrogen production. This project develops a chemical approach to synthesizing bimetallic cobalt-nickel phosphide nanostructures for their use in HER. The synthesis is accomplished by thermal decomposition of the metal precursors in the presence of carbon monoxide (CO) and trioctyl phosphine (TOP). The resulting nanostructures were characterized using transition electron microscopy …

Boron-Doped Diamond As A Resilient Electrode Material In Molten Salts, Hannah Katherine Patenaude

UNLV Theses, Dissertations, Professional Papers, and Capstones

Molten salt chemistry has a range of applications within nuclear technology, including for the Molten Salt Reactors (MSRs) and pyroprocessing to recover valuable actinides for energy and national security needs. However, the high-temperature, corrosive nature of molten salts makes them particularly challenging to deploy on an industrial scale and study in benchtop measurements. Material accountability and corrosion monitoring of MSR fuels are essential components to the successful deployment of MSRs, and electroanalytical techniques like cyclic voltammetry (CV) and spectroelectrochemistry (SEC) can provide a wealth of information to describe salt systems in situ. To perform such measurements, it is imperative to …

Sliding Markov Decision Processes For Dynamic Task Planning On Uncrewed Aerial Vehicles, Trent Wiens

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Mission and flight planning problems for uncrewed aircraft systems (UASs) are typically large and complex in space and computational requirements. With enough time and computing resources, some of these problems may be solvable offline and then executed during flight. In dynamic or uncertain environments, however, the mission may require online adaptation and replanning. In this work, we will discuss methods of creating MDPs for online applications, and a method of using a sliding resolution and receding horizon approach to build and solve Markov Decision Processes (MDPs) in practical planing applications for UASs. In this strategy, called a Sliding Markov Decision …

Dynamic Impact Testing And Numerical Analysis Of Non-Proprietary Astm F2656-20 M50 Anti-Ram Barrier Components, Weston Kelley

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In a post-9/11 world, hostile actors are using vehicles as weapons to inflict civilian casualties. Pedestrians, vulnerable road users, military personnel, and police may be targeted using a vehicle as a weapon. The United States Department of Defense (DoD) also utilizes Entry Control Facilities (ECFs) which are carefully designed transportation corridors to manage how threat vehicles are able to access military facilities. In 2004, DoD started to upgrade all ECFs using both passive and active barriers. Many anti-ram vehicle barriers were evaluated according to the criteria established in ASTM F2656, but to date few options are available which are (1) …

Crystalline Colloidal Arrays: Exploring Light-Matter Interactions, Haley W. Jones

All Dissertations

Understanding and manipulating quantum light-matter interactions, especially in the context of nanostructured environments, is highly critical for technological progress and inventive solutions in the fields of telecommunications, energy-efficient lighting, and cutting-edge quantum computing technologies. The fundamental interactions of photons with a surrounding environment directly impact the performance and efficiency of devices such as lasers, light-emitting diodes (LEDs), and quantum computing elements, which leverage the unique properties of confined structured environments. Since the late 1980s, the connection between a structured environment and the decay kinetics of an embedded fluorophore has been a highly debated and unresolved topic in the literature. More …

Process-Structure-Property-Performance Modeling For Semicrystalline Thermoplastics And Composites, Tatiana Stepanova

All Dissertations

With a growing focus on reducing the adverse effects of transportation on the environment, industries are seeking fuel-efficient and sustainable solutions. Fuel efficiency can be improved in several ways, but structural lightweighting has demonstrated overall effectiveness. In this regard, thermoplastic composites and additive manufacturing (AM) thermoplastics have become viable candidates for use in the automotive industry, given the need for weight reduction and efficiency improvement.

The advantages of AM include simplifying supply chains, simplifying part geometry, and enabling mass customization. In order to design high-performance AM structures, extensive modeling and simulation are required. AM thermoplastics are similar to conventional manufacturing …

Engineering Multifunctional Silicon Nanostructures From Biorenewable Cellulose Nanocrystals, Nancy Chen

All Dissertations

The imperative search for alternative materials to address the pressing demand for advance energy storage is underscored by the escalating environmental predicaments. Lithium-ion batteries (LIBs) with graphite anodes have become the benchmark in energy storage; however, they are approaching a saturation point in terms of energy density. Silicon emerges as a promising contender to supplant graphite, owing to its profuse availability, cost-effectiveness, and impressive specific capacity of 4200 mAh g^-1. By integrating silicon anodes, LIBs stand to undergo a radical transformation, markedly diminishing in weight and size, thus heralding a novel wave of compact, lightweight energy storage systems. …

A Manufacturing-To-Response Pathway For Manufacturing Optimization Of Carbon Fiber Reinforced Polymer Composite Structures, Madhura Limaye

All Dissertations

Over the past decade, there has been an increased adoption of thermoplastic and thermoset based continuous carbon fiber reinforced polymer (CFRP) composites for structural applications in several industries. Among the different manufacturing methods, thermoforming process for thermoplastic based continuous CFRP’s offer a major advantage in reducing cycle times for large scale productions. Similarly, out-of-autoclave curing process for thermoset based continuous CFRP’s using heated tooling enables production of large composite structures. However, these manufacturing processes can have a significant impact on the structural performance of parts by inducing undesirable effects. These effects include inhomogeneous fiber orientations, thickness variations, and residual stresses …

Stabilization Of Layered Transition Metal Oxide Positive Electrodes At High Potential For Sodium Ion Batteries, Eric Gabriel

Boise State University Theses and Dissertations

As global demand for energy storage rises in response to the proliferation of electric vehicles and intermittent renewable energy sources, the resources associated with popular energy storage systems are increasingly strained. Lithium ion batteries (LIBs) rely heavily on elements with low abundance and unstable supply chains, while sodium ion batteries (SIBs) are a promising alternative technology based on abundant, globally available elements such as iron and sodium. However, the electrochemical performance of SIBs must be improved to enable their commercial viability. In the class of layered transition metal oxide (LTMOs) materials that are strong candidates as positive electrode materials for …

The Effect Of Extended Saltwater Absorption And Uv Cure On The Compressive Properties Of Msla 3d-Printed Photopolymer Resin Samples With Printing Variations, Suzanne Dixon

Theses and Dissertations

Liquid Crystal Display (LCD) 3D printers, also known as Masked Stereolithography Apparatus (MSLA), is a type of vat polymerization printing technique that cures liquid resin into a solid object. This technique is relatively new. Consequently, there is a shortage of detailed research on the impact of long-term environmental exposure on the MSLA-printed materials. The research within this document informs engineers and scientists of resin compressive properties after extended exposure to saltwater and ultraviolet (UV) light. Saltwater absorption of the material was analyzed at atmospheric pressure, 30-psi, 60-psi, and 90-psi; the samples reached saturation in saltwater after 56 days. The variation …

A Comprehensive Investigation Of The Influence Of Geometric Structure On The Shape Memory Performance Of Nafion, Jade Thomas

Mechanical Engineering Undergraduate Honors Theses

While perfluorosulfonic acid (PFSA) membranes have primarily been used in fuel cells due to their chemical, thermal, and mechanical stability, one PFSA, Nafion, boasts two unique characteristics: a broad glass transition (~55 °C to 130 °C) and a temperature-persistent electrostatic network. The combination of these two characteristics endows Nafion with exceptional shape memory properties – the ability of a material to morph and transform into pre-programmed shapes when exposed to an external stimulus – with enhanced permanent shape memorization, and a potentially near-infinite number of temporary shape memorization. This study focused on expanding the base of knowledge surrounding Nafion’s shape …

Thermal Conductivity Of Thin Porous Ceramic Coatings: An Analytical And Experimental Study, Lei Zhao

Theses and Dissertations

An analytical model of the thermal conductivity of the porous yttrium-stabilized zirconia (YSZ) layer used in the thermal barrier coatings (TBCs) is presented. Such high-temperature resistant coatings are essential to protect the metallic components of gas turbine engines. The model calculates the conductivity based on the coating's porosity, pore size distribution, and pore morphology, including the individual pore cross-section area, aspect ratio, and orientation, which are extracted from the scanning electron microscopy images. The model was verified through comparisons with numerical simulation results from a multiphysics software tool. A laser temperature gradient test was performed to validate the analytical model …

Effects Of Bending And Re-Bending On Mechanical Properties Of Locally-Manufactured Steel Rebars, Patrick W. Waruhiu, Simon I. Marandu, Mussa I. Mgwatu

Tanzania Journal of Science

Steel rebars experience deformation when subjected to bending and re-bending operations. Subsequently, their microstructures are impaired thus affecting the mechanical properties and leading to failure. This study establishes the effects of bending and re-bending the steel rebars on the mechanical properties. Experiments were conducted to determine the effects of bending and re-bending of the steel rebars. Testing was conducted on Ten virgin and Thirty specimens which were bent and re-bent at 45º, 90º, and 180º, and followed by tensile tests. Yield strength, ultimate tensile strength, elongation, and ultimate tensile strength to yield strength ratio (Rm/Re), were recorded. Results showed the …

Study Of Reactive Distillation Equipment For Eterification Process, Abbos Elmanov, Abdulaziz Bakhtiyorov, Adham Norkobilov, Olimjon Maksudov, Zarif Oripov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is to study the chemical technological processes for eterification processes, and the reactive distillation unit, which carries out the reaction and separation process in one device, was chosen as the object of research. А reаctive distillаtion system is exаmined to produce for the production of Ethyl Acetate (EtAc) viа eterificаtion of acetic acid (HAc) with ethаnol. Optimizаtion methods using sensitivity analysis аre аlso conducted. Cаlculаtion of vаpor liquid equilibrium of the mixture system is done using UNIFАC model. Heat integration from the distillate stream of the column to the acid feed stream and from bottom …

Numerical Calculation Of The Flame Spreading Over A Methane Hydrate Surface, Otabek Nigmatov, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The Methane Hydrate is expected as an energy source and is being as a medium distance transport means of natural gas alternative of LNG (Liquefied Natural Gas). During the natural gas transportation, fire accidents are concerned. In the present study, the flame spreading over a methane hydrate surface has been studied numerically as a function of hydrate surface temperature, T_s. When T_s = 173 K (-100℃), lower than the dissociation temperature (T_d = 183 K (-90℃)), the flame spreading speed is around 6.5 mm/s, while the flame spreading speed at T_s = 193 K (-80℃), …

Dft Study Of Quantum Chemical Parameters Of 4-Amino-2-Mercaptobenzimidazole And Their Tautomeric Forms, Dilnoza Rahmonova, Alisher Eshimbetov, Lobar Gapurova, Zuhra Ch. Kadirova, Shakhnoza Kadirova

CHEMISTRY AND CHEMICAL ENGINEERING

Coordination competing donor centers, electronic and geometric structures of the 4-amino-2-mercaptobenzimidazole ligand molecule were studied using quantum chemical calculation by the DFT / 6-31G method (d, p). It was shown that during the formation of the metal complex, the ligand is coordinated through the localized nitrogen atom of the imidazole ring. In this study, the total energies (Etot) of 4-amino-2-mercaptobenzimidazole (1) and its tautomeric forms (2 and 3) were calculated. And also, the energies of boundary molecular orbitals, the energy gap between boundary MOs (ΔE) and the distribution of the total charge on atoms and boundary orbitals were determined. In …

The Effect Of Hydrogen Peroxide And Potassium Amylxanthate On The Surface Properties Of Chalcocite And Enargite, Berdakh T. Daniyarov, Hajime Miki, Daminbek A. Ziyatov, Shahlo Daminova

CHEMISTRY AND CHEMICAL ENGINEERING

The effect on the surface properties and floatability of chalcocite and enargite after oxidative treatment with hydrogen peroxide (H₂O₂) in the presence and absence of potassium amylxanthate (PAX) as a collector was studied. In this research, flotation tests were carried out on mixed and individual minerals. Oxidative treatment with hydrogen peroxide had a negative effect on the floatability of chalcocite and enargite. PAX adsorption analysis shows that enargite adsorbs PAX faster than chalcocite. Moreover, Fourier transform infrared spectroscopy analysis shows that PAX was adsorbed in the form of copper amylxanthate on chalcocite and enargite surfaces. In …

Influence Of The Amount Of Monoethanolamine On The Physicochemical Properties Of Aminolysis Products, Soxibjon A. Egamberdiyev, Muzaffar G. Alimukhamedov, Juraev Asror, Ravshan Adilov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this paper is to investigate the process of aminolysis of secondary polyethylene terephthalate with monoethanolamine at low ratio. The effect of the amount of monoethanolamine on the physical and chemical properties of the aminolysis product of secondary polyethylene terephthalate was studied. With an increase of 1-4 moles of monoethanolamine obtained for synthesis (without the presence of a catalyst), it was observed that the number of amines in the aminolysis product increased from 324 to 503 mgKON/g, and the number of hydroxyls increased from 298 to 491 mgKON/g. The structure of the resulting bis(2-hydroxyethylene)terephthalamide was studied using IR …

Study Of The Structure Of Glass Ionomer Cements Developed Based On Glass System Sio2-Al2o3-Cao-Zno-P2o5-Caf2, Tatyana O. Nam, Mastura X. Aripova, Ripsime V. Mkrtchyan

CHEMISTRY AND CHEMICAL ENGINEERING

The goal was to study the structure of glass ionomer cements (GIC) developed on the basis of glasses of the SiO₂-Al₂O₃-CaO-ZnO-P₂O5-CaF₂ system. Glass powders with sizes less than 50 μm were sealed with a 40% solution of polyacrylic acid and after 72 hours, electron microscopic examination was carried out on a JSM-IT200 scanning microscope (JEOL, Japan). All samples demonstrate a cellular structure consisting of glass particles surrounded by glass elements that have entered into an acid-ion interaction with polyacrylic acid in a polymer matrix. GIC-4 and GIC-6 show the most …

Impact Of Sulfurization On Sputtered Bivo4 Thin Films, Shukur P. Gofurov, Dilbar T. Bozorova, Zuhra Ch, Kadirova, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The sulfurization method has been used to decrease the band gap of the BiVO₄ structure, reduce the recombination of electrons and holes, and increase the photoelectrochemical performance of this material. It has been observed that incorporation of sulfur into stoichiometric and V_rich BiVO₄ is variously affected changing of properties of the structure. Sulfurization can modify V_rich BiVO₄ structure rather than stoichiometric BiVO₄.

Development Of Clinker And Portland Cement Composition Based On Surkhondaryo Raw Materials, Salohiddin Ramazanov, Abdumalik Nabiyev, Mastura Aripova

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this research work is to develop clinker and Portland cement compositions based on Surkhandarya raw materials for the planned construction of a cement plant, as well as to study their physical and chemical properties. The compositions of clinkers, including limestone, clay from the Yolgizbulok deposit and slag from the Almalyk mining and metallurgical plant, were studied. The optimal clinker composition was selected, on the basis of which Portland cement was obtained. The optimal amount of gypsum addition was determined to achieve a cement stone strength of 43,5 MPa. The developed clinker composition will provide the planned enterprise …

Antibacterial Cerium-Containing Glazes For Ceramic Tiles, Ivan Levitskiy, Mastura Aripova, Mihail Dyadenko, Dar’Ya Kucherova, Artem Golub

CHEMISTRY AND CHEMICAL ENGINEERING

The results of research on the production of semi-fritted cerium-containing glazes used for ceramic tiles are presented.

A multicomponent raw material mixture based on dolomite, cerium dioxide CeO₂, aluminosilicate multicalcium frit and permanent components including feldspar, alumina and clay components (kaolin and refractory clay) is used to produce glazes.

The characteristics of the obtained coatings were studied: appearance, technological and physico-chemical properties, including antibacterial properties in relation to the strains of Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538. The influence of temperature parameters on the formation of glaze coatings, as well as their structure and phase …