Engineering Commons^™

Degradation Study Of Single Crystal Barium Titanate Capacitors Under Harsh Environment, Menglin Wang

Electrical Engineering Theses and Dissertations

Capacitors are critical for voltage source converter functionality. DC-link capacitors are known to have reliability issues. Resistance degradation at high temperatures is one of the primary failure modes in capacitors. The overall goal of this program is to improve the understanding of high voltage breakdown and resistance degradation in high dielectric constant inorganic ceramic capacitors, using single crystal BaTiO₃ as a model system to understand the impact and control of oxygen vacancy migration to maximize the long-term reliability of high voltage inorganic multi-layer ceramic capacitors, which allows higher frequency operation, reducing the size and cost of passive components in …

Knowledge Management Of Historical Data: Ontology Development For Chemical Reactions, Quynh D. Tran, Alexander Harding Bradley, Balashanmuga Priyan Rajamohan, Jonathan E. Gordon, Van D. Tran, Kiefer Lin, Erika I. Barcelos, Laura S. Bruckman, Roger H. French

Researchers, Instructors, & Staff Scholarship

Knowledge management of the literature and historical data is critical to accelerated drug and materials discovery. Currently, literature knowledge is scattered in journal articles in various formats: diagrams, texts, plots, etc. Historical data from past experiments are saved in a number of local computers under confusing folder structures with ambiguous file names. To manage and organize historical data and knowledge, our group (SDLE) at CWRU follows FAIR (Findable, Accessible, Interoperable, Reusable) principles, which outline the best practices for data stewardship and data provenance, and ontology, a formal representation of terms and concepts and their relationships, as a tool to improve …

A Fair Ontology For Aps Beamline Experiments, Gabriel Ponón, Balashanmuga Priyan Rajamohan, Mohommad Redad Mehdi, Finley Holt, Erika Barcelos, Pawan K. Tripathi, Roger H. French

Student Scholarship

Data produced at the 1-ID beamline APS are often serialized in large, disconnected tables, which can impede the effective reuse and replication of analysis performed for cutting edge research and instrumentation conducted at the facility. This poster describes an alternative approach of utilizing component-based FAIR (Findable, Accessible, Interoperable, and Reusable) ontologies as a framework for organizing and connecting experimental variables. Three packages were developed to facilitate the creation and connection of component ontologies into a fully connected FAIR ontology for an experiment. An ontology-based workflow is also discussed for beamline scientists and users to visualize and connect collected values alongside …

Uncertainty Quantification In Machine Learning Models Via Gaussian Process Regression: A Comparative Study, Ayorinde E. Olatunde, Weiqi Yue, Pawan K. Tripathi, Roger H. French, Anirban Mondal

Faculty Scholarship

As the use of Machine learning models in science and engineering continues to increase, there is an increasing need for quantifying the uncertainties inherent in the predictions of these models. The more complex a model is, the more the uncertainties in its predictions increase. Amongst the plethora of methodologies used in quantifying uncertainties lies Gaussian Process Regression (GPR). GPR surmounts some of the popular shortfalls of other state-of-the-art methodologies. Although GPR has some quick wins in its application for uncertainty quantification, it is plagued with some shortfalls, such as scalability issues when the feature space increases as well as an …

Stability, Mechanical Properties, And High-Pressure Structural Modifications Of Some Industrially Relevant Metallic Glasses, Alexander George

Graduate Theses & Non-Theses

Metallic glasses are metal-based alloys that have an amorphous structure and glass transition behavior as a result of being cooled rapidly enough to suppress crystal nucleation and growth[1]. Metallic glasses have been formed with two to eight constituents[2][3][4]; however, the most stable glass-forming systems typically contain four or more elements. With few exceptions, metallic glass-forming alloys are extremely unstable, requiring cooling rates on the order of 10⁸-10^-2 K/s to form a glassy sample. This instability translates to reheating, where onset crystallization temperatures infrequently exceed the glass transition by more than 100K. Strong glass-forming ability typically occurs over …

Solar Process Heat Pyrolysis, Maxwell Triepke

Graduate Theses & Non-Theses

Solar process heat pyrolysis mobilizes the production of biochar via selective solar absorbance. Mobilization allows for the production of pyrolysis products at the location of the biomass source while eliminating the need for infrastructural power to operate the reactor. Traditionally, the implementation of economies of scale has led to large, permanent biochar production facilities; however, biochar feedstock is often in remote locations or stockpiled temporarily in mill/forestry operation locations. Modular reactors are important to eliminate feedstock location, transportation, and variability limitations. Previous work at Montana Technological University’s CHAR Laboratory has developed two lab scale modular, both tethered to infrastructural power. …

Computational Fluid Dynamics Modeling Of 12.25” Horizontal Wellbores To Identify The Effects Of Pipe Rotation On Cuttings Transport Efficiency, David Rathgeber

Graduate Theses & Non-Theses

As global demand for oil and gas continues to rise alongside pressures to curb climate change, Exploration and Production (E&P) companies look to reduce their surface footprint and increase drilling efficiency through longer horizontal well drilling. In addition, the depletion of conventional reservoirs is causing E&P companies to target more difficult reservoirs, often miles offshore (Gupta et al., 2014; Meader et al., 2000a). The increased horizontal reach of these wells often leads to increased challenges in adequate hole cleaning during drilling operations. Efficient hole cleaning becomes a greater challenge in high-angle wells, with gravitational forces causing pipe eccentricity, flow channeling, …

Radiation-Tolerant Thin-Film Reference Electrodes And Potentiometric Sensors, Bingyuan Zhao, Alexander Wei

Department of Chemistry Faculty Publications

The integration of electronic sensors into single-use systems for bioprocessing is challenged by their sensitivity to sterilizing γ-irradiation. This challenge also applies to reference electrodes (REs), whose potentials may be destabilized upon ionization and drift over time. Here we evaluate the performance of thin-film Ag/AgCl REs over a two-month window following γ-ray sterilization using a 60Co source. γ-REs display a characteristic voltage decay function ascribed to the dissipation of radiation-induced charge defects, and exhibit long-term potentiometric stability when stored in phosphate-buffered saline (PBS) with a 95% confidence interval of 4 mV over 60 days. γ-REs have a mean insensitivity (inertness) …

Development And Structural Origin Of Stretchable Semiconducting Polymers And Composites, Yunfei Wang

Dissertations

Stretchable semiconductors are pivotal in advancing wearable and implantable electronics, with those boasting both high stretchability and self-healing capabilities being especially significant for a myriad of wearable applications. In this dissertation, we developed an extremely soft, highly stretchable, and self-healing elastomer based on H-bonding crosslinked amide-functionalized polyisobutylene (PIB-amide). When blended with a high-performance conjugated diketopyrrolopyrrole (DPP-T) polymer, the composite exhibits unprecedented stretchability, exceptionally low elastic modulus, and an innate ability to self-heal at room temperature.

The morphology of conjugated polymer/elastomer semiconducting composites have significant impacts on electrical and mechanical properties Further investigations focused on manipulating the phase separation size in …

Settingsorder Article Reprints Open Accessarticle A Model To Account For The Effects Of Load Ratio And Hydrogen Pressure On The Fatigue Crack Growth Behavior Of Pressure Vessel Steels, Ashok Saxena, Kip O. Findley

Mechanical Engineering Faculty Publications and Presentations

A phenomenological model for estimating the effects of load ratio R and hydrogen pressure P_H2 on the hydrogen-assisted fatigue crack growth rate (HA-FCGR) behavior in the transient and steady-state regimes of pressure vessel steels is described. The "transient regime" is identified with crack growth within a severely embrittled zone of intense plasticity at the crack tip. The "steady-state" behavior is associated with the crack growing into a region of comparatively lower hydrogen concentration located further away from the crack tip. The model treats the effects of R and P_H2 as being functionally separable. In the transient …

Surface Patterning On Zirconia Dental Implants Via Laser-Induced Shockwave Imprinting, Inomjon Majidov

Masters Theses & Specialist Projects

Zirconia is rapidly becoming a preferred alternative to titanium in dental applications, primarily due to its aesthetic resemblance to natural teeth. This material’s tooth-like color avoids the aesthetic issues associated with the grey metal tint of titanium implants. Additionally, zirconia is hypoallergenic, making it an ideal choice for patients with metal sensitivities or allergies. Despite these advantages, zirconia generally exhibits lower biocompatibility and osseointegration compared to titanium implants. This study investigates laser-assisted, controlled imprinting technique on zirconia surfaces to enhance these properties. Our research used zirconia pellets, produced from powdered monoclinic zirconia pressed in a pellet press machine. Two methods …

Unrefined And Milled Ilmenite As A Cost-Effective Photocatalyst For Uv-Assisted Destruction And Mineralization Of Pfas, Eustace Y. Fernando, Zhiming Zhang

Henry M. Rowan College of Engineering Departmental Research

Per- and polyfluoroalkyl substances (PFAS) are fluorinated and refractory pollutants that are ubiquitous in industrial wastewater. Photocatalytic destruction of such pollutants with catalysts such as TiO2 and ZnO is an attractive avenue for removal of PFAS, but refined forms of such photocatalysts are expensive. This study, for the first time, utilized milled unrefined raw mineral ilmenite, coupled to UV-C irradiation to achieve mineralization of the two model PFAS compounds perfluorooctanoic acid (PFOA) and perfluoro octane sulfonic acid (PFOS). Results obtained using a bench-scale photocatalytic reactor system demonstrated rapid removal kinetics of PFAS compounds (>90% removal in less than 10 …

Development And Processing Of Shape Memory Polymer Composites (Smpcs) For Application In Structural Robotics And Robotic Sensors., Kavish Sudan

Electronic Theses and Dissertations

Shape Memory Polymers (SMPs) have attracted significant attention since their introduction in the 1980s due to their remarkable ability to regain their original shape from a temporarily deformed state when exposed to an external stimulus, typically heat. This shape memory effect, driven by thermal transitions such as the glass transition temperature (T_g) or melting temperature (T_m), has made SMPs highly attractive for applications in soft robotics, aerospace, and biomedical devices. However, SMPs face challenges such as limited mechanical strength, thermal stability, and electrical conductivity, which hinder their broader adoption in advanced applications. To address these challenges, …

Synergistic Strategies In Hybrid Mxed Matrix 3d Printing Of Thermoplastics & Thermosets: Design, Manufacturing, And Materials Development., Saleh Akram Khanjar

Electronic Theses and Dissertations

Composite manufacturing and mixed matrix structures have been produced using traditional manufacturing processes for various industrial applications due to their high mechanical properties to material weight and cost ratio. However implementation of composite and mixed matrix manufacturing with advanced manufacturing such as additive manufacturing is limited due to the hardware limitations of current 3d printing technologies and materials available for 3D printing applications. This work has developed and investigated a new hybrid 3D printing manufacturing process utilizing a variety of material systems (thermoplastic – thermoset, thermoplastic – thermoplastic, thermoset – thermoset, thermoplastic – thermoplastic – thermoset). This study developed thermoplastic …

Investigating Near-Field Radiative Heat Transfer With Titanium Carbide Mxenes And Slanted Columnar Thin Films, Sean Luke Murray

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This work investigates the mechanisms to manipulate and control the magnitudes of Near-Field Radiative Heat Transfer (NFRHT) using two-dimensional materials and nanostructured surfaces. NFRHT occurs when the geometrical features of the radiating objects or the separation distance between interacting bodies are comparable to or lower than the characteristic thermal radiation wavelength. NFRHT magnitudes surpass the blackbody limit by several orders of magnitude due to phenomena such as photon tunneling and new modes of energy transfer, like surface polaritons. Therefore, it is crucial to understand how material properties and surface nanostructures affect NFRHT.

The first part of this work examines the …

Engineering The Properties Of Magnesium Aluminate Spinel Through Solid State Solutions, Robin Conner

All Theses

Magnesium aluminate spinel solid state solutions were prepared via the coprecipitation method and calcined in air at 900 °C for 2 h. The manipulation of magnesium aluminate spinel’s microstructure through the formation of solid state solutions with zinc and gadolinium substituting for magnesium was investigated. X-ray diffraction (XRD) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR FTIR) confirmed the formation of a single cubic crystalline phase. The luminescence properties were investigated by radioluminescence (RL) under X-ray excitation and thermoluminescence (TL) measurements. In the case of zinc, all concentrations of the solid state solutions showed similar luminescence with bands at …

Understanding The Microstructure And Tribological Performance Of Cocrfeni-Based High Entropy Alloys, Ali Azarmi

All Theses

Due to their higher wear resistance compared to conventional alloys, high entropy alloys (HEAs) are now being considered as candidates for parts undergoing sliding contact during their lifetimes. While the engineering field has built some knowledge related to the performance of selected high entropy alloys, such as the CoCrFeNi alloy, more research is needed to determine if (how) expansions from four to five principal alloying elements alter the performance compared to the initial alloy. In this study, we started this research effort by investigating the relative performance of CoCrFeNiMn and CoCrFeNiTi with respect to CoCrFeNi. The two primary alloying elements …

Local Charge Distortion Due To Cr In Ni-Based Concentrated Alloys, Jacob Fischer

All Theses

Due to the presence of multiple elements consisting of a range of atomic radii, local lattice distortion (LLD) is commonly observed in concentrated (and high entropy) alloys. However, since these elements also have diverse electronegativities, recent works show that atoms can have a range of atomic charges. In this work, using density functional theory (DFT), we investigate electronic charge distribution in face centered cubic (FCC) Ni-based alloys and find significant charge-density distortion in HEAs. Specifically, Cr atoms have large charge density distortion that results in a wide range of bond lengths, atomic charges, and electronic density of states in Cr-containing …

Predicting The Ductility Of Tungsten Based Bcc Refractory High Entropy Alloys: A Computational Science Driven Study, Akshay Korpe

All Theses

Bcc refractory high entropy alloys (HEAs) are a relatively new category of metallic alloys that promise excellent irradiation resistance and strength retention at high temperatures but exhibit brittle behavior at room temperatures limiting their formability. Understanding the deformation mechanisms and predicting their ductility at room temperature is a topic of interest in contemporary research.

In this work, multiple independent ductility criteria for quantifying the ductility of these HEAs were studied, calculated and compared using Density Functional Theory (DFT) calculations and continuum mechanics frameworks. These ductility parameters were calculated for various W-Ta-Cr-V alloys and the trends were analyzed for each criteria …

Enhancing Thermal Stability Of Perovskite Solar Cells Through Thermal Transition And Thin Film Crystallization Engineering Of Polymeric Hole Transport Layers, Sanggyun Kim, Sina Sabury, Carlo A. R. Perini, Tareq Hossain, Augustine O. Yusuf, Xiangyu Xiao, Ruipeng Li, Kenneth R. Graham, John R. Reynolds, Juan-Pablo Correa-Baena

Chemical and Materials Engineering Faculty Publications

Organic hole transport layers (HTLs) have been known to be susceptible to thermal stress, leading to poor long- term stability in perovskite solar cells (PSCs). We synthesized three 2,5-dialkoxy-substituted, 1,4-bis(2-thienyl)phenylene (TPT)-based conjugated polymers (CPs) linked with thiophene-based (thiophene (T) and thienothiophene (TT)) comonomers and evaluated them as HTLs in n-i-p PSCs. TPT-T (MB/C6), which has branched 2- methylbutyl and linear hexyl (MB/C6) side chains, emerged as a promising HTL candidate, enabling power conversion efficiencies (PCEs) greater than 15%. In addition, PSCs with this HTL showed an improvement in long-term stability at elevated temperatures of 65 °C when compared to those …

Synthesis Of Selenium Nanostructures: Rods, Wires, And Fibers By Pulsed Laser Ablation In Liquids, Atikur Rahman

Theses and Dissertations

Selenium is a semiconductor that has a bulk energy bandgap of 1.74 eV, is mainly used in sensors, rectifiers, and advanced photovoltaic solar cells. Selenium is very important for the energy applications and was declared as Energy Critical Element (ECE) by the American Physical Society (APS) and the Materials Research Society (MRS). The goal of this dissertation was to control the growth of selenium when being irradiated by a pulsed laser within a liquid environment. The method called “Pulsed Laser Ablation in Liquids” is a green synthesis technique that allows for ligand-free nanoparticles to be created. Laser repetition rates were …

Laser Surface Processing For Enhanced Adhesion Between Diamond Coatings And Metallic Substrates, Zhipeng Wu

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Application of diamond coatings on metallic substrates endows them with superior properties including mechanical robustness and corrosion resistance, rendering them highly adaptable for diverse industrial and technological applications. However, significant disparities in coefficients of thermal expansion (CTEs) result in pronounced residual stress near interfaces, causing delamination of the diamond coatings. Moreover, weak chemical bonding poses a concern for certain metallic substrates. Laser surface processing techniques show promise in enhancing adhesion by altering stress distribution and improving mechanical bonding. Therefore, the research efforts described in this dissertation mainly focus on femtosecond (fs) laser texturing for enhanced adhesion of diamond coatings on …

Synthesis Of Silica-Encapsulated Myristic Acid Phase-Change-Assisted Nanocapsules For Thermal Management Applications, Muhammad Ghufran, David Huitink

Mechanical Engineering Faculty Publications and Presentations

Myristic acid-based silica (MA/SiO₂) nano-encapsulated phase change materials (NePCMs) were synthesized by the sol–gel process. Five different samples of the MA/SiO₂ nanocapsules were prepared by varying the mass of the myristic acid. The nanocapsules were characterized by Fourier transform infrared spectrophotometer (FTIR), X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), energy dispersive X-ray (EDX), and dynamic light scattering (DLS). These characterization techniques confirmed the successful encapsulation of the myristic acid inside the silica shell. The maximum latent heat was found to be 114.46 J/g for the sample which was prepared with 25 g myristic …

Fabrication And Characterization Of Lignin–Pva Hydrogels With Tunable Network Structures, Keturah Bethel

All Dissertations

The ability to directly tune the crosslinked network structure of hydrogels is crucial for their functional applications in various fields, such as water filtration, protein separation, and tissue engineering. By controlling the crosslink density of the hydrogel, one can directly alter the mesh size – i.e., the end-to-end distance between crosslink junctions – and, subsequently, directly alter the hydrogel performance. This work discusses the fabrication and characterization of soft composites containing the biopolymer, lignin, are discussed. Precisely, physically-crosslinked composite lignin–Poly(vinyl alcohol) (PVA) hydrogels were fabricated via the freeze-thaw (F/T) pathway, whereby solutions containing specified amounts of PVA and lignin were …

Modeling Study Of Si3N4 Waveguides On A Sapphire Platform For Photonic Integration Applications, Diandian Zhang, Shui-Qing Yu, Gregory J. Salamo, Richard A. Soref, Wei Du

Electrical Engineering and Computer Science Faculty Publications and Presentations

Sapphire has various applications in photonics due to its broadband transparency, high-contrast index, and chemical and physical stability. Photonics integration on the sapphire platform has been proposed, along with potentially high-performance lasers made of group III–V materials. In parallel with developing active devices for photonics integration applications, in this work, silicon nitride optical waveguides on a sapphire substrate were analyzed using the commercial software Comsol Multiphysics in a spectral window of 800~2400 nm, covering the operating wavelengths of III–V lasers, which could be monolithically or hybridly integrated on the same substrate. A high confinement factor of ~90% near the single-mode …

Resolving The Size And Charge Of Small Particles: A Predictive Model Of Nanopore Mechanics, Samuel Bearden, Tigran M. Abramyan, Dmitry Gil, Jessica Johnson, Anton Murashko, Sergei Makaev, David Mai, Alexander Baranchikov, Vladimir Ivanov, Vladimir Reukov, Guigen Zhang

Chemical and Materials Engineering Faculty Publications

The movement of small particles and molecules through nanopore membranes is widespread and has far-reaching implications. Consequently, the development of mathematical models is essential for understanding these processes on a micro level, leading to deeper insights. In this endeavor, we suggested a model based on a set of empirical equations to predict the transport of substances through a solid-state nanopore and the associated signals generated during their translocation. This model establishes analytical relationships between the ionic current and electrical double-layer potential observed during analyte translocation and their size, charge, and mobility in an electrolyte solution. This framework allows for rapid …

Performance And Enhanced Efficiency Induced By Cold Plasma On Sapo-34 Membranes For Co2 And Ch4 Mixtures, Fnu Gorky, Vashanti Storr, Grace Jones, Apolo Nambo, Jacek B. Jasinski, Maria L. Carreon

Chemical Engineering Faculty Publications and Presentations

In this study, we investigate the influence of cold-plasma-induced enhanced performance and efficiency of SAPO-34 membranes in the separation of CO₂ and CH₄ mixtures. Placing the herein presented research in a broader context, we aim to address the question of whether cold plasma can significantly impact the membrane performance. We subjected SAPO-34 membranes to plasma mild disturbances and analyzed their performance in separating CO₂ and CH₄. Our findings reveal a notable enhancement in membrane efficiency and sustained performance when exposed to cold plasma. The pulsed plasma separation displayed improved structural integrity, and the experimental results …

In Situ Shear Exfoliation Of Layered Materials And Fabrication Of Multifunctional Composites, Md Abdur Rahman Bin Abdus Salam

Theses and Dissertations

To harness the extraordinary properties of 2D nanomaterials across a range of applications, including but not limited to device fabrication (such as sensors and transistors), energy storage and conversion systems (like batteries and solar cells), as well as biomedical applications (such as drug delivery and tissue engineering), it is imperative to achieve proper synthesis to single-layer form from bulk material, ensuring defect-free synthesis. Recognizing the criticality of defect-free synthesis and high yield for nanocomposite production, our focus centered on developing a facile, contamination-free, single-step, in situ shear exfoliation process for bulk materials (such as graphene, hBN, coal) within elastomers, which …

Attachment Of 2d Nanomaterials Onto 1d Nanofibers For Separation And Sensing Applications, Elmmer A. Vera Alvarado

Theses and Dissertations

Advancing materials for water desalination and sensing is essential for tackling global issues related to clean water and efficient energy systems. This thesis explores the application of 2D nanomaterials, specifically graphene, integrated onto 1D poly(vinylidene fluoride) (PVDF) nanofibers to enhance their effectiveness in these areas. Utilizing innovative techniques such as Forcespinning® and plasma treatment, PVDF nanofibers were strengthened with graphene and conductive polymers like poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT: PSS). The research involved thorough assessments using direct contact membrane distillation (DCMD) systems, oil-water separation tests, and various mechanical and electromechanical evaluations. Heat-pressed membranes consistently delivered a flux of 0.33 kg/m²/hr and …

Proportioning And Performance Of Ultra-High Performance Concrete (Uhpc) For High Friction Surface Treatment (Hfst) On Pavement And Bridge Decks, Adam R. Biehl

All Theses

High Friction Surface Treatment (HFST) is a roadway remediation technique used to improve pavement’s coefficient of friction, to enhance roadway safety. The application of HFSTs has repeatedly demonstrated the ability to significantly reduce crashes in both wet and dry conditions. Typically, epoxy-resins and calcined bauxite aggregate are used in HFST treatment. However, the high material costs and scarcity of calcined bauxite render this form of HFST an expensive and limited option for roadway rehabilitation. Therefore, the identification of alternative binders and HFST aggregates is needed for broad scale implementation. One potential alternative binder is Ultra-High-Performance Concrete (UHPC), a specialty cementitious …