Engineering Commons^™

Innovative Approaches For Improving Orc Performance: A Review Of Pure Fluids, Zeotropic Mixtures, And Nanoparticles, Ebenezer Kumi, Vasudevarao Veeredhi, Christopher Enweremad

Journal of Mechanical Engineering Science and Technology (JMEST)

Although the organic Rankine Cycle (ORC) is said to effectively capture low-grade heat, its commercialization has been limited because of working fluid constraints and inefficiencies resulting from operating at low temperatures. This study reviews the working fluids used in organic Rankine cycles and examines how nanoparticles could enhance the efficiency of the ORC, by enhancing the thermophysical properties of the working fluids. Results from this review showed that zeotropic mixtures of pure fluids, provide a viable approach to improving the thermophysical characteristics of organic working fluids and have the potential to achieve thermo-economic performance superior to that of individual pure …

Innovations In Additive Manufacturing For Socket Fabrication: An Overview, Linda Ziyadatul Faiza, Wahyu Caesarendra, Wahyu Dwi Lestari

Journal of Mechanical Engineering Science and Technology (JMEST)

Additive Manufacturing (AM) has transformed the prosthetics industry, particularly in socket production, which plays a critical role in the comfort, fit, and functionality of prosthetic limbs. This article examines the latest advancements in AM technologies and their applications in socket fabrication. Key techniques like stereolithography (SLA), selective laser sintering (SLS), and fused deposition modeling (FDM) have facilitated the production of highly personalized, lightweight, and durable prosthetic sockets. These methods not only improve design precision but also allow for the use of biocompatible, flexible materials, enhancing both comfort and functionality. Digital design tools have streamlined the production process, reducing lead times …

Structural Simulation Of Wheelchair Ramp Using Finite Element Method, Bhre Wangsa Lenggana, Agung Nugroho, Ubaidillah Ubaidillah

Journal of Mechanical Engineering Science and Technology (JMEST)

Wheelchairs are essential mobility aids for people with disabilities, but they are often limited to flat surfaces and cannot overcome height differences. Portable ramps are an effective solution to overcome this limitation. This research aims to simulate and analyze the structure of a portable ramp for wheelchairs. Simulations were conducted using finite element method analysis software to assess the portable ramp's von Mises stress, deformation, and safety factor in various loading positions. Finite element method (FEM) analysis software was utilized to evaluate key mechanical properties, including von Mises stress, deformation, and safety factor, under different loading conditions and positions. The …

Analysis Of Biomass Briquette Mixed Bagasse And Sugarcane Peel On The Performance Of Forced Top-Lit Updraft Gasifier Stove, Intan Hardiatama, Aron Enruico, Yuni Hermawan, Muhammad Trifiananto, Skriptyan N.H. Syuhri

Journal of Mechanical Engineering Science and Technology (JMEST)

The population growth in Indonesia from 270 million in 2020 to 279 million in 2024 has increased LPG consumption, potentially leading to future fuel shortages. The top-lit updraft (TLUD) gasifier stove using renewable biomass materials, offers a sustainable alternative. Biomass such as bagasse and sugarcane peel can be optimized into charcoal briquettes with high calorific value and low emissions. The calorific value of briquettes can be further enhanced by blending other high–calorific biomass materials. This experimental research focuses on testing the calorific value of raw bagasse and sugarcane peel before carbonization, as well as briquette mixtures (70:30, 50:50, 30:70) using …

Characterization And Performance Nanofiltration Membranes In Water Quality For Goldfish (Carassius Auratus) Aquaculture, Inpita Casuarina Eqisetia Utari, Uun Yanuhar, Asus Maizar Suryanto Hertika, Heru Suryanto, Jibril Maulana, Nico Rahman Caesar, Mahrus Ismail, Leong-Seng Lim

Journal of Mechanical Engineering Science and Technology (JMEST)

Water quality is an important factor in aquaculture activities, including goldfish (Carassius auratus) farming. One approach to improving water quality is the use of nanofilters. This study aims to evaluate the performance of nanofilters made from Sargassum sp. with the addition of copper oxide nanoparticles. The method used involves the fermentation of bacterial cellulose from Acetobacter xylinum using Sargassum sp. extract as a medium, followed by homogenization and the addition of CuO-NPs at concentrations of 0.5%, 1%, and 1.5%, and subsequent oven drying. The nanofilter membrane will then be analyzed using SEM, XRD, and FTIR to characterize its properties. Performance …

The Potential Of Ramie Fiber As Reinforcement In Calcium Carbonate-Filled Polyester Resin Matrix Composites For Roofing Applications, Reinaldo Reinaldo, Djoko Setyanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Polymer matrix composite roofing materials available in the Indonesian market typically consist of 30%wt chopped strand mat glass fiber embedded in unsaturated polyester resin, filled with 30 parts per hundred resin (PHR) calcium carbonate. The aim of this research is to evaluate whether natural ramie fibers can potentially replace glass fibers. In the first stage of the study, we compared three types of natural fibers abundant in Indonesia: banana stem fibers, sugarcane bagasse, and ramie. Showed that ramie fiber performed the best. Its flexural strength, flexural modulus, and impact toughness were the highest, measured at 191.57 MPa, 6691 MPa, and …

Captivating Combustion Traits Of Bio-Oil Droplets Enriched With Bio-Additives From The Areca Shell Waste, Muhammad Alif Raehan, Helen Riupassa, Hendry Y. Nanlohy

Journal of Mechanical Engineering Science and Technology (JMEST)

Fuel derived from crude vegetable oil, such as coconut oil, holds promise as an alternative energy source to mitigate the increasing reliance on fossil fuels driven by population growth and industrial activities. The experiment involved suspending a single droplet of crude coconut oil mixed with activated carbon from areca shell waste and placed at the junction on R-type thermocouple (Pt/Pt-Rh13%). The droplets were ignited using a hot wire and subjected to atmospheric pressure and room temperature. Coconut oil comprises a saturated triglyceride carbon chain compound of approximately 91%, and areca shell waste possesses a porous structure that fosters favorable interactions …

Characterization Of Hydroxyapatite Derived From Scallop Shell Waste Synthesized By Sonochemical Method With Different Temperature Calcination, Diki Dwi Pramono, Poppy Puspitasari, Aminnudin Aminnudin, Jeefferie Abd Razak

Journal of Mechanical Engineering Science and Technology (JMEST)

One common bio-ceramic material used in the biomedical industry is hydroxyapatite. Because of its crystallographic and molecular resemblance to the hard tissues of the human body, hydroxyapatite is thought to form. Scallop shells are one natural source of hydroxyapatite, which is high in calcium. This study examines how the calcination temperature affects the characteristics of hydroxyapatite made from leftover scallop shell. Hydroxyapatite was synthesized via the sonochemical method, with calcination conducted at temperatures of 900°C, 1000°C, and 1100°C. The hydroxyapatite that was prepared was assessed using Xray diffraction (XRD) to determine the phase and crystallite size, Scanning Electron Microscopy (SEM) …

The Role Of Banana Peel Surface Pores Through Increasing Temperature For Efficient Hydrogen Production, Abid Fahreza Alphanoda, Erlanda Augupta Pane, Agus Riyanto, Avita Ayu Permanasari

Journal of Mechanical Engineering Science and Technology (JMEST)

Porous carbon derived from banana peel has been synthesized by increasing the temperature range variation from 180 oC - 270 oC. The prepared carbon was tested in an experiment using double-chamber photoelectrochemistry to see the results of hydrogen production. SEM-EDX, FTIR, and TGA analyses identified all banana peel carbons. Optical and electrochemical properties were analyzed and measured by UV-Vis, Tauc Relationship, and Pearson Absolute Electronegativity. The amount of hydrogen gas produced from the simulation of UV-A visible light irradiation on variations of BP-240, BP-210, BP-180, and BPNatural. The surface of BP-270 has more pores and can produce the most significant …

Impact Of Natural Polymer Proportions On The Fire-Retardant Properties Of Bioplastics, I Gusti Ngurah Nitya Santhiarsa, Ni Made Dwidiani, I Gusti Ngurah Putu Tenaya, I Gede Artha Negara

Journal of Mechanical Engineering Science and Technology (JMEST)

This research investigates the influence of varying proportions of natural polymers on the fire-retardant properties of bioplastic. Tapioca starch (Manihot esculenta) and corn starch (Zea mays) were selected as the bioplastic materials, with different weight fractions employed in the analysis. These materials, as naturally occurring polymers, are biodegradable and serve as promising components in the development of bioplastics. Fire resistance testing was conducted in accordance with ASTM D635-03, utilizing weight ratios of tapioca to corn starch at 70:30, 60:40, and 50:50. The results included photographic documentation of each specimen alongside the corresponding outcomes from the fire resistance tests. These images …

Analysis Of Titanium Mesh Ti6al4v Formation Using Die Press Forming Machine For Cranioplasty, Ahmad Ayyub Syaiful Rizal, Mahros Darsin, Robertoes Koekoeh K. Wibowo, Khairul Anam

Journal of Mechanical Engineering Science and Technology (JMEST)

Cranioplasty is required for patients with head defects, where the deformed part of the head is replaced with Ti6Al4V titanium wire implants. The titanium wire forming process is usually done manually, which can take a long time and give results that do not match the anatomical shape of the head. Therefore, it is important to develop domestic technology that can produce titanium wire automatically. This study aims to analyze the frame and mold of the automatic wire mesh molding machine before production. The tool is made using press forming method and finite element analysis with ANSYS software. The machine frame …

The Effect Of Mixing Time And Rotation Speed On The Consistency Of Dough Viscosity In A Horizontal Mixer, Muhammad Akhlis Rizza, Ekky Yovianto Dharsono, Anggit Murdani, Ratna Monasari, Radhi Nurvian Amrullah, Supa Kusuma Aji, Dian Noorvy Khaerudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Cassava must go through several manufacturing processes before it becomes chips on the market, including the process of stirring the dough. The stirring process is an important stage in various food industries. In the stirring process, the viscosity change in the dough is influenced by various factors, including the stirring process time and speed in stirring. Research on dough viscosity is important because it is directly related to the quality of the final product. The purpose of this study is to provide recommendations to users, both in the context of using horizontal mixers and the process of making similar products. …

Tactical Activities To Improve The Effectiveness Of Concrete Batching Plant Based On Overall Equipment Effectiveness Analysis, Yurida Ekawati, Iddo Christian Sutrisno, Teguh Oktiarso

Journal of Mechanical Engineering Science and Technology (JMEST)

The growth of infrastructure projects has led to an increased demand for ready-mix concrete. A company that produces ready-mix concrete using a batching plant encountered difficulties in fulfilling customer orders due to the high rate of machine downtime. Overall equipment effectiveness (OEE) was employed to examine these issues at the tactical activities, where the root causes of losses that occur in the OEE components of availability, performance, and quality were addressed. The OEE analysis was extended to encompass maintenance effectiveness measures, as the anticipated solution to the problem was not the replacement of the machine, but rather an enhancement of …

Friction Modeling Of Composite Brake Pads With Ulin Wood Powder (Eusideroxylon Zwageri), Muhammad Rezki Fitri Putra, Hajar Isworo, Muhamad Noor Yasin, Rachmat Subagyo

Journal of Mechanical Engineering Science and Technology (JMEST)

This study investigates the performance of composite brake pads made of Ulin (Eusideroxylon zwageri) sawdust using simulation modeling, focusing on the pressure distribution, frictional stress, and contact state in five brake pad designs (DS0 to DS4). The brake pad designs used U-shaped grooves to improve cooling efficiency and debris removal. The results show that DS1 and DS2 exhibit the most uniform pressure distribution, with maximum values of 0.045 MPa and 0.048 MPa, respectively. DS1 recorded the highest peak frictional stress at 2.53 × 10-8 MPa, while DS2 showed consistent stress stability, reducing the possibility of uneven wear. DS3 achieved a …

The Influence Of Sodium Chloride Treatment On The Sisal Fiber Bundle’S Properties, Tamaryska Setyayunita, Heru Suryanto, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Currently, composite board manufacturing using natural fiber has the potential to be expanded due to environmental awareness. To produce high-performance natural fiber, treatment is needed to improve natural fiber’s mechanical and physical properties. One of chemical treatments is by using sodium chloride (NaCl). This study aimed to investigate the characteristics of sisal fiber after NaCl treatment. The concentrations of NaCl treatment were 1, 3, and 5 (wt.%) at room and boiling temperature and the soaking duration was 1 hour. Meanwhile, tensile strength, strain, and Young’s modulus were tested to evaluate the mechanical properties. Fiber bundle diameter, weight change due to …

Aqueous Supercapacitors With Wide Operative Voltage Window And Long Cycling Life Enabled By Electrolyte Hybridization Effect, Shi-Hua Ma, Qi Yin, Jin-Ping Zhao

Journal of Electrochemistry

Developing supercapacitors (SCs) with long cycling life and wide operative voltage window is a significant topic in the field of aqueous electrolytes. Although the design of water in salt (WIS) electrolytes has pushed the development of aqueous electrolytes to a new height, the WIS electrolytes with an operative voltage window of up to 2.5 V is still very scarce. Herein, in order to enrich the type of aqueous electrolyte with high operative voltage, tetramethylammonium trifluoromethanesulfonate (TMAOTf) based WIS electrolyte was used as a model to construct WIS based hybrid electrolyte with acetonitrile (ACN) co-solvent and LiTFSI co-solute. In view of …

Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Made A Public Appearance At The 22nd National Electrochemical Congress, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

The Award Ceremony Of The 2nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers Came To A Successful Conclusion, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

The 9th National Conference Of Solid State Battery Successfully Held In Xiamen, Fujian, Zheng-Liang Gong

Journal of Electrochemistry

No abstract provided.

Effects Of Surface Treatment On Adhesive Performance Of Composite-To-Composite And Composite-To-Metal Joints, Nikhil Paranjpe, Md. Nizam Uddin, Akm S. Rahman, Ramazan Asmatulu

Publications and Research

This study deals with the long-running challenge of joining similar and dissimilar materials using composite-to-composite and composite-to-metal joints. This research was conducted to evaluate the effects of surface morphology andsurfacetreatments onthemechanicalperformanceofadhesively bonded joints used for the aircraft industry. A two-segment, commercially available, toughened epoxy was chosen as the adhesive. Unidirectional carbon fiber prepreg and aluminum 2021-T3 alloys were chosen for the composite and metal panels, respectively. Surface treatment of the metal included corrosion elimination followed by a passive surface coating of Alodine®. A combination of surface treatment methods was used for the composite and metal specimens, including detergent cleaning, plasma …

Development Of Machine Learning-Based Tool For Prediction Of Long-Term Field Performance Of Asphalt Concrete Overlays In A Hot And Humid Climate, Elise Mansour

LSU Doctoral Dissertations

The performance of pavement plays a critical role in Maintenance, Rehabilitation and Reconstruction (MR&R) for highway agencies. Reliable and accurate estimation of pavement performance can be instrumental in prioritization of the limited resources and funding for highway agencies. The latter requires robust prediction models that can handle large-scale, real-world data and can forecast pavement performance in the long run. Unfortunately, the traditional performance prediction models have raised concerns regarding their efficiency and accuracy. It is because these models were based on a limited number of explanatory variables, were not up-to-date and were designed for forecasting short-term (up to five years) …

Understanding The Plastic Issue (Poster Presentation), Regan Bossie, Peter Nguyen, John Mcswiggin, Adam Meadows

Sustainability Conference

The Plastic-Free Campus Initiative is an Embry-Riddle initiative advocating for the reduction and elimination of single-use plastics on the Daytona Beach campus.

Our poster presentation aims to highlight current issues and concerns by presenting plastic production trends, quantifying how plastic pollution has affected global ecosystems, and discussing the material characteristics of plastics and their consequences. The poster will provide an overview of the current state of global recycling and will outline key concerns that microplastics, and plastics in general, pose to public health. By presenting the current facts and concerns related to plastic and recycling, we hope to encourage individuals …

Computational Design Of Complex Concentrated Alloys, Hamid Sharifi

Doctoral Dissertations

A high-throughput parameterization of modified embedded atom model (MEAM) interatomic potentials for combinations of Cu, Ti, Ni, Cr, Co, Al, Fe, and Mn was carried out using a genetic algorithm. Unary systems were parameterized based on DFT calculations and experimental results. MEAM potentials for 28 binary and 56 ternary combinations of the elements were parameterized to DFT results that were carried out with semi-automated frameworks. Specific attention was made to reproduce properties that impact compositional segregation, material strength, and mechanics. Utilizing the MEAM interatomic potentials and a Monte Carlo scheme, phase segregation in the CrNiCo, CuNiCr and CuNiCo fcc alloys …

Machine Learning-Driven Process Analysis And Optimization In Solid-State Welding And Fusion-Based Additive Manufacturing, Radif Uddin Ahmed

Master's Theses

In the modern era of advanced manufacturing, optimizing process parameters is pivotal in ensuring the quality and reliability of sophisticated component fabrication. This study presents a novel, data-driven approach to parameter optimization in two cutting-edge manufacturing techniques: Friction Stir Welding (FSW) and Laser Powder Bed Fusion (LPBF). By leveraging machine learning methodologies, this research addresses the critical challenge of efficiently determining optimal process parameters, a task traditionally relying on time-consuming and resource-intensive trial-and-error methods. This study will lead to a robust data-driven framework for process analysis of more advanced manufacturing techniques like the Additive Friction Stir Deposition (AFSD) process. Friction …

Biocorrosion Analysis Via Multiscale Time Series Analysis, Victor Hugo Mendoza Vejar, Eliseo Hernandez Martinez, Hector Puebla

Annual Symposium on Biomathematics and Ecology Education and Research

No abstract provided.

Biofabrication Of Tissue Constructs Using Protein-In-Polysaccharide Bioinks For Muscle Regeneration, Harshavardhan B

Theses and Dissertations

Myocardial infarction (MI) and volumetric muscle loss (VML) are debilitating conditions that severely affect patient quality of life and challenge healthcare systems, particularly in diagnosis and treatment. Conventional therapies often result in long recovery periods with limited functional restoration. Advances in regenerative medicine, especially extrusion-based 3D bioprinting, offer promising potential to improve the regeneration of complex tissues by precisely depositing cells and biomaterials layer-by-layer to create tailored tissue constructs.

A critical challenge in muscle tissue regeneration is developing protein-polysaccharide bioinks that closely mimic the native muscle tissue microenvironment. In this study, two protein-inpolysaccharide bioinks (alginate-fibrinogen and methylcellulose-gelatin-alginate) were developed to …

Quantifying Chemomechanical Weakening In Muscovite Mica With A Simple Micromechanical Model, Jordan J. Sickle, William M. Mook, Frank W. Delrio, Anastasia G. Ilgen, Wendelin Wright, Karin A. Dahmen

Faculty Journal Articles

In response to gradual nanoindentation, the surface of muscovite mica deforms by sudden stochastic nanometer-scale displacement bursts. Here, the statistics of these displacement events are interpreted using a statistical model previously used to model earthquakes to understand how chemically reactive environments alter the surface properties of this material. We show that the statistics of nanoindentation displacement bursts in muscovite mica are tuned by chemomechanical weakening in a manner similar to how the statistics of model events are tuned by a mechanical weakening parameter that describes how easily system-spanning cracks can be nucleated. Because the predictions of this model are independent …

Metal Additive Manufacturing Of Damage-Controlled Elements For Structural Protection Of Steel Members, Hamdy Farhoud, Islam Mantawy

Henry M. Rowan College of Engineering Departmental Research

This paper develops hybrid steel members by integrating additively manufactured, ultra-lightweight, damage-controlled elements (DCEs) into hot-rolled structural steel members. This approach relies on segmenting a structural member into distinct sections; one or two segments are enlarged to be capacity protected; however, another end or middle DCE segment is optimized to emulate the conventional member’s strength and stiffness. A small-scale DCE was topologically optimized and then additively manufactured using a powder bed fusion technique through a direct metal laser sintering process of 17-4PH stainless steel and then was experimentally tested to study the buckling behavior under compression. The experimental testing of …

Refining Chlorosulfonation Methods For The Synthesis Of A Perfluoroalkyl Arylsulfonimide (Pfsi) Monomer, Ainsley P. Foster, Benjamin Varney, Hua Mei

Science University Research Symposium (SURS)

Proton-exchange membrane (PEM) fuel cells are sources of energy that are clean, quiet, and highly responsive to changes in power needs, making them promising for use in automobiles and other portable power devices. The electrolyte of a PEM cell–the layer responsible for conductivity–is a polymer membrane, commonly consisting of perfluoroalkyl sulfonic acid (PFSA) polymers. Perfluoroalkyl arylsulfonimide (PFSI) polymers are expected to improve the efficiency of PEM fuel cells through optimal stability and proton conductivity. The trifluovinylether (TFVE) aryl perfluorosulfonamide monomer is a new PFSI monomer proposed to fulfill these benefits once polymerized. A six-step synthesis route was initially designed to …

Synthesis And Properties Of (Hf,Mo,Ti,W,Zr)B2–(Hf,Mo,Ti,W,Zr)C Dual Phase Ceramics, S. Filipović, S. M. Smith, G. Hilmas, W. Fahrenholtz, N. Obradović, S. Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

Dense, dual phase (Hf,Mo,Ti,W,Zr)B₂–(Hf,Mo,Ti,W,Zr)C ceramics were synthesized with varying contents of Mo and W. The final (Hf_0.317Mo_0.025Ti_0.317W_0.025Zr_0.317)C–(Hf_0.317Mo_0.025Ti_0.317W_0.025Zr_0.317)B₂ was a nominally pure, dual phase ceramic, while compositions with higher amounts of Mo and W contained multiple phases. The final microstructures had submicron grains due to pinning effects. Vickers hardness values were up to 48.6 ± 2.2 GPa for an applied load of 0.49 N for the ceramic with optimized composition and densification. The solubility limits for Mo and …