Engineering Commons^™

Study Of The Temperature Dependence Of The Haeffner Effect In Mercury, Charles George Arnold

Masters Theses

“In 1953, E. Haeffner (1) reported that after he had passed a direct electric current through a capillary tube filled with mercury, he obtained a separation of the isotopes of mercury. It was found that the heavier isotopes were enriched at the negative terminal and the lighter Isotopes at the positive terminal. This effect has since been referred to as the Haeffner Effect. Since this original experiment, other investigators have observed this effect in many other liquid and some solid metal systems.

The work of J. N. Baysden (2) showed that the separation of the isotopes in mercury could be …

A Study Of The Structure And Some Physical Properties Of Antimony Glasses, Pakinam Mahmoud Askalani

Archived Theses and Dissertations

No abstract provided.

A Thermodynamic Study Of The Zirconium-Sulfur, Titanium-Sulfur And Hafnium-Sulfur Systems In The Disulfide-Trisulfide Region, Norbert Achilles Vermaut

Doctoral Dissertations

"A static method was used to study the equilibria which exist between the higher sulfides of zirconium and sulfur at temperatures from 700° to 1000 °C. Both disulfide and trisulfide have been identified by chemical analysis and X-ray diffraction. There exists a two-phase region of 'ZrS₂' and 'ZrS₃'. The composition limit of the homogeneous disulfide phase appears to exist between ZrS_1.90 and ZrS_2.00. The lower composition limit of the homogeneous region of the trisulfide phase was established as ZrS_2.75.

An experimental method of Blitz and co-workers, i.e., the use of evacuated …

Mechanism Of Siliconizing Of Molybdenum And Tantalum By Vapor Deposition, Gordon Pu Kong Chu

Doctoral Dissertations

"Molybdenum and tantalum were siliconized in an enclosed system by the hydrogen reduction of silicon tetrachloride with induction heating between 900°C and 1450°C.

The siliconizing process was primarily influenced by the gaseous composition, temperature, time, molar flow ratio (SiCl₄/H₂), geometrical shape and ionization charges. The rate of siliconizing, measured as the weight gain by the fused quartz helix balance, generally follows a parabolic law, y = k t^1/2, where y = weight gain, t = time, and k = rate constant. The activation energy is estimated at 21.6 k cal/mole for siliconizing of molybdenum. …

6th Annual Rocky Mountain Spectroscopy Conference Program

Rocky Mountain Conference on Magnetic Resonance

Program from the 6th annual meeting of the Rocky Mountain Spectroscopy Conference, sponsored by the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, August 12-13, 1963.

6th Annual Rocky Mountain Spectroscopy Conference Abstracts Of Papers

Rocky Mountain Conference on Magnetic Resonance

Abstracts of papers presented at the 6th annual meeting of the Rocky Mountain Spectroscopy Conference, sponsored by the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, August 12-13, 1963.

6th Annual Rocky Mountain Spectroscopy Conference Reply Card

Rocky Mountain Conference on Magnetic Resonance

Reply Card for the 6th annual meeting of the Rocky Mountain Spectroscopy Conference, sponsored by the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, August 12-13, 1963.

Non-Ferrous Metal Mining And Smelting In Australia

School of Mines and Metallurgy Bulletins

Bulletin was published without an Abstract

Studies In Modulation Of Interfacial Reactions For Certain Sulphide Minerals, Robert Owen Beyaert

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Habit Modification Of Naclo3 With Nai, William A. Coghlan

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Production Of Standard-Grade Ferromanganese In An Electric Arc Furnace, Force F. Baney Jr.

Bachelors Theses and Reports, 1928 - 1970

The investigations conducted in this project were essentially concerned with the effects of various compositions of two different slag systems upon the increased recovery of manganese in a standard-grade ferromanganese.

Investigation Of The Ternary System Silver-Aluminum-Indium (Ag-Al-In), Elvin H. Beardslee

Bachelors Theses and Reports, 1928 - 1970

This thesis paper contains material pertaining to & preliminary investigation of the ternary system Ag-Al-In. Procedures in this preliminary investigation are discussed in detail.

Preliminary Examination Of The Aluminum Corner Of The Ternary System Aluminum-Silver-Indium (A1-Ag-In), Jerome J. Blake

Bachelors Theses and Reports, 1928 - 1970

In this paper the author attempts to lay the groundwork for future work on the Al-Ag-In system.

Increased Corrosion Of A 304 Stainless Steel Upon Bending, William C. Tiddy

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Identification Of Nonmetallic Inclusions In Armco Ingot Iron With Polarized Light, Frank E. Panisko

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Some Advances In Milking Shed Installations And Techniques, G W. Scott

Journal of the Department of Agriculture, Western Australia, Series 4

TklG improvements in milk quality and increases in the level of production have occurred in recent years.

This has been largely due to improved dairy premises, technical advances in machine milking and better shed husbandry.

The Hydrometallurgy Of Uranium, John E. Cesarani

Bachelors Theses and Reports, 1928 - 1970

No abstract provided.

Liquid Mercury Embrittlement Of Thin-Walled 2024 Aluminum Tubes, Edward J. Beckemeyer

Masters Theses

"The dislocation theory, Zener-Stroh crack model, and the Petch relationship, which correlates fracture stress and grain size, were used to analyze the embrittlement of 2024 aluminum alloy tubes by liquid mercury.

Surface energy ratios, [formula], were determined for biaxial stress ratios of 1/2, 1, ∞. The values of the surface energy ratios considered were 4.24, 1.79, 1.46, respectively. As part of this study, an approximate Nabarro-Peierls frictional stress was calculated for each stress ratio"--Abstract, page 2.

A Study Of A Method For Determining Properties Of Metals At High Strain Rates., Warren Heidbreder

Masters Theses

"An experimental method has been developed for determining the tensile and other physical properties of metals under high loading rates. Experimental equipment was designed, fabricated and tested. It was desirable to keep the equipment simple and inexpensive so that it could be used by operators Lacking experience in electronics and high-speed photography which are required for some of the more sophisticated methods now in use. The energy for pulling the specimens is supplied by smokeless gun powder. The firing of a cartridge into a closed cylinder with movable piston accomplishes the breaking of the specimen. A record of the time, …

Non-Ferrous Metal Mining And Smelting In Australia, H. R. Hanley

Missouri School of Mines and Metallurgy Bulletins

No abstract provided.

A Preliminary Study Of The Dielectric Properties Of Bismuth Ferrate Ceramics., John Joseph Schwaller

Masters Theses

"In this investigation some of the results of Fedulov¹⁸ for a composition of 30 percent lead titanate - 70 percent bismuth ferrate were verified. The system of lead zirconatebismuth ferrate was studied with sintering data determined for the series. By X-ray and microscopic analysis the system was determined to be not a solid solution. The dielectric measurements show a linear relation between the dielectric constant and the percent lead zirconate from 100 percent BiFeo₃ to 10 percent BiFeo₃ - 90 percent PbZro₃"--Abstract, p. ii

Zinc Sulfide-Sulfate Reaction Pressures, William L. Hallerberg

Masters Theses

"A static manometric method was used to find the equilibrium reaction pressure as a function of temperature for the reaction:

11 ZnSO₄ + ZnS → 4 (ZnO·2ZnSO₄) + 4 SO₂

From the reaction pressures, the standard free energy of the reaction was found to be:

ΔF⁰ = + 51,320 - 36.68 T

Using thermodynamic data for ZnSO₄, ZnS and SO₂ the standard free energy of formation of the basic salt ZnO·2ZnSO₄ was found to be:

ΔF⁰ = - 377,000 - 65.9 T cal/mole

in the temperature range 350 to 420⁰ C.

Above …

Dissolution Rates Of Zone Refined Iron And Steel In Hydrochloric And Sulfuric Acids And In Sodium Chloride Solutions., Gary E. Welch

Masters Theses

"Dissolution rates for two carbon steels were deter­ mined in four concentrations of sulfuric acid at five temperatures and in four concentrations of hydrochloric acid at four temperatures.

No general relationship was found for the variation in activation energies in sulfuric and hydrochloric acid. An explanation of the difference in the reaction rates and a possible explanation of the activation energy is presented on the basis of chunk formation.

The results of this investigation indicate an electrochemical control mechanism for the dissolution reaction of steel in acid solutions.

Results of dissolution rate studies in sulfuric and hydrochloric acid solutions and …

Phase Extent Of Gaas, Gasb, And Insb, And Solid Solubility In The System Gaas-Gasb Determined By The Lattice Constant-Density Method., Chang Don Kim

Masters Theses

"The lattice constant of the homogeneous gallium arsenide varies from 5.65298A⁰ to 5.65J26A⁰ at 25° c with a change of composition in the range from 49-935 to 50.015 atomic percent gallium. The lattice constants of g allium and indium antimonide are 6.09592A⁰ and 6.47876A⁰ at 25 ° c, respectively and the extent of the phases of gallium and indium antimonide could not be found in this work.

The thermal expansion coefficient of gallium arsenide is 6.4 x 10^-6/⁰ C in the range between 10 and 65° c regardless of composition, ar.d those of …

An Equilibrium Study Of The System Bi-S-H₂, Don Hie Lee

Masters Theses

"An experimental study has been conducted to determine the equilibrium behavior of the system Bi-S-H₂. The system was studied by equilibrating H₂-H₂S gas mixtures with Bi(l)- Bi₂S₃(s) two-phase mixtures at temperatures of 500°, 600°, 700° and 750°C in a circulating type equilibrium apparatus. The equilibrium gas mixtures were analyzed by a Fisher Gas Partitioner with a reproducibility of approximately 0.06 %.

A linear free energy equation has been derived from the results with an average deviation of ± 1 Kcal. This deviation is well within the accepted experimental accuracy for …

Determination Of The Standard Free Energy Of Formation Of Zr₃S₂, Peter E. Otten

Masters Theses

"The Knudsen effusion method was used to find the equilibrium magnesium pressure for the reaction

3 Zr (s) + 2 MgS (s) = 'Zr₃S₂' (s) + 2 Mg (v)

By using known standard free energy data for the formation of magnesium sulfide and by using the equilibrium magnesium pressure, the standard free energy of formation of Zr₃S₂ was calculated and could be expressed by the equation

Δ F° = -139,800 + 49.13 T cal/mole

in the temperature range 900 to 1100°C.

It was also found that Zr₃S₂ was the zirconium …

A Thermodynamic Study Of The Molybdenum-Sulfur System At 1100⁰C, Seth C. Schaefer

Masters Theses

"A static method was used to determine equilibrium sulfur pressure for molybdenum-sulfur mixtures at 1100°C.

The results obtained were:
(1) The molybdenum disulfide phase was stable in a sulfur pressure range of 1.023 x 10^-5 to 6.026 x 10^-1 atmospheres. A range of non-stoichiometry from MoS_2.00 to MoS_2.22 was determined under these conditions.
(2) The upper limit of sulfur content of molybdenum sesquisulfide (Mo₂S₃) is nearly stoichiometric.
(3) The extent of solid solution of sulfur in molybdenum is approximately 1.5 atomic % (0.5 wt %).
(4) Molybdenum sesqu-isulfide (Mo₂S_{3 …}

A Study Of The Solubility Of Gold In Aluminum And The Extent Of The Al₂Au Phase., Kuldip Singh Chopra

Masters Theses

"The lattice constant of pure aluminum (99.998%) at 25° C 0 was determined to be 4.04953 A and the limit of solubility of gold in aluminum at 58O° c was found to be about o.4 weight percent gold. The minimum of the lattice constant was observed at O.75 weight percent gold. No change in the lattice constant with time was found.

The Al₂Au phase has a range from 77.66 to 78.94 weight percent gold with the theoretical composition of Al₂Au nearly in the middle of the phase. The thermal coefficient of expansion, the density and the …

Influence Of Porosity On The Fracture Stresses Of Electrical Porcelain., Edward Anton Snajdr

Masters Theses

"Spherical pores were induced in a typical quartz electrical porcelain body. Three levels of pore size and four levels of concentration were studied. Large strength sample sizes were employed using a three-point loading and diametral loading method. Data for induced quartz particles is also included"--Abstract, p.ii

An Electrolytic Polishing And Recrystallization Study Of Zinc And Zinc Alloys., Roy Ashley Smith

Masters Theses

"A Unitron hot stage and polarized light were used to enable direct observation of recrystallization in high purity (99.99 per cent) zinc and high zinc content alloys. Electrolytic polishing was investigated in an attempt to prepare unetched surfaces which would show good structural contrast under polarized light and thus permit structural changes occurring during recrystallization to be observed.

Kinetic data obtained from a sequence of photographs during each recrystallization trial showed typical sigmoidal isothermal reaction curves characteristic of a nucleation and growth process. It was determined that rates of nucleation and grain growth are a maximum over the same time …