Engineering Commons^™

The Effect Of Asphalt Emulsion On The Properties Of Fly Ash Based Geopolymers, Natcha Prommityat, Chiravoot Pechyen, Pitak Laoratanakul, Benya Cherdhirunkorn

Journal of Metals, Materials and Minerals

This research aimed to study the effect of asphalt emulsion (AE) on the properties of fly ash based geopolymers. Solid waste materials used for the production of geopolymer were coal fly ash (FA) 70 wt% and bagasse ash (BA) 30 wt%. Alkaline solution used for the geopolymerization reaction was the mixture of 10 M NaOH and Na2Sio3

with the ratio of 1:2. The liquid and solid (L/S) ratios of 0.6, 0.7 and 0.8 were prepared. The AE of 1 wt%, 3 wt% and 5 wt% were added into the raw materials mixtures. Then, the mixed slurry was casted into a …

Antibacterial, Self-Adhesive Guar Gum/Polyvinyl Alcohol/Tannic Acid Conductive Hydrogels For Flexible Strain Sensors, Noppanan Putdon, Somnuk Theerakulpistut, Rawit Jittham, Pornnapa Kasemsiri

Journal of Metals, Materials and Minerals

In this research, a multifunctional strain sensor with antibacterial properties and self-adhesion capabilities was developed using guar gum (GG), polyvinyl alcohol (PVA), and tannic acid (TA). The incorporation of TA into GG-PVA hydrogel-based strain sensors was investigated to evaluate its effects on mechanical and electrical properties, self-adhesion, and antibacterial activities. The anti-bacterial activities against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were enhanced with the increasing content of TA. The adhesive strength was observed in the range of 1.20 ± 0.10 kPa to 5.05 ± 0.23 kPa, and the values tended to increase as TA content increased. The …

Mechanochemical Synthesis Of Ni(Ii)-Tptz Complexes With Co-Ligands: Spectroscopy, Dft, And Biological Studies, Deepak Senapati, Anulipsa Priyadarshini, Debadutta Samal, P. Ramesh Babu, Satyanarayan Sahoo, Narayan Chandra Bera, Raghabendra Samantaray, Jagannath Panda, Rojalin Sahu

Journal of Metals, Materials and Minerals

New mixed-ligand Ni(II) complexes [Ni(tptz)(1,10-phen)] (1), [Ni(tptz)(2-Mimd)2] (2), and [Ni(tptz)Imd)2] (3) were synthesized via a green, solvent-free mechanochemical approach using ball milling. The primary ligand used was 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz), with secondary ligands being 1,10-phenanthroline, 2-methyl imidazole, and imidazole, respectively. Structural characterization by IR, UV-Visible, photoluminescence spectroscopy, and powder X-ray diffraction, supported by DFT calculations, revealed a distorted square planar geometry for complex 1 and distorted tetrahedral geometries for complex-2 and complex-3. Notably, bathochromic shifts in the UV-Vis spectra confirm metal-ligand charge transfer transitions and extended π-delocalization. Powder XRD analysis determined average crystallite sizes of 17.86 nm (1), 25 nm (2), …

Liquid-Liquid Extraction Of Nd(Iii) Using [P66614][Cy272] Ionic Liquid, Prasanjit Das, Kali Sanjay, Niharbala Devi

Journal of Metals, Materials and Minerals

This study explores the extraction of Nd(III) from synthetic solutions using the ionic liquid [P66614] [Cy272]. Key extraction parameters, including the effect of phase contact time, initial pH, salting-out agents, extractant concentration, and temperature, were systematically optimized. Results revealed that a phase contact time of 15 min, an initial pH of 2.14, and 0.2 mol∙L‒1 NaCl as a salting-out agent and extractant concentration of 0.015 mol∙L‒1 [P66614][Cy272], achieved maximum extraction efficiency of 99.7%. Thermodynamic analysis confirmed the process is to be exothermic, spontaneous, and entropy-driven, highlighting the strong complexation between Nd(III) and the ionic liquid [P66614][Cy272]. Stripping tests revealed that …

Exploration And Synthesis Of Tin Intermetallic Single Crystals, Jared L. Shortt

Graduate Theses/Dissertations

This thesis presents the synthesis and characterization of two tin-based intermetallic compounds: Mn₄.₁₂Sn and Ni₆Sn₈Ge₀.₄₇. Single crystals were grown using a high-temperature self-flux method, allowing for the formation of phase-pure samples suitable for structural and physical property analysis. The crystalline phases were identified and refined using powder and single-crystal X-ray diffraction (XRD), while scanning electron microscopy combined with energy-dispersive X-ray spectroscopy (SEM/EDS) was employed to verify stoichiometry and homogeneity. Magnetization measurements performed using a superconducting quantum interference device (SQUID) magnetometer revealed distinct magnetic behavior in the manganese-rich compound, while the nickel-based compound was explored for potential magnetic features arising from …

Development Of Bio-Based Coating Materials For Environmentally Friendly Controlled-Release Nitrogen Fertilizer Applications, Anne Carolyne Mendonca Cidreira

Electronic Theses and Dissertations

No abstract provided.

A Pyrrole Modified 3,4-Propylenedioxythiophene Conjugated Polymer As Hole Transport Layer For Efficient And Stable Perovskite Solar Cells, Yuanhao Tang, Ke Ma, Wenhao Shao, Yoon Ho Lee, Ashkan Abtahi, Jiaonan Sun, Hanjun Yang, Aidan H. Coffey, Harindi R. Atapattu, Mustafa Ahmed, Qixuan Hu, Wenzhan Xu, Raunak Dani, Limei Wang, Chenhui Zhu, Kenneth R. Graham, Jianguo Mei, Letian Dou

Chemical and Materials Engineering Faculty Publications

Despite the outstanding electric properties and cost-effectiveness of poly- (3,4-ethylenedioxythiophene) (PEDOT) and its derivatives, their performance as hole transport layer (HTL) materials in conventional perovskite solar cells (PSCs) has lagged behind that of widely used spirobifluorene-based molecules or poly(triaryl amine). This gap is mainly from their poor solubility and energy alignment mismatch. In this work, the design and synthesis of a pyrrole-modified HTL (PPr) based on 3,4-propylenedioxythiophene (ProDOT) are presented for efficient and stable PSCs. As a result of the superior defects passivation ability, excellent contact with perovskite, enhanced hole extraction, and high hydrophobicity, the unencapsulated PPr-based PSCs showed the …

Analysis Of Tar And Oil Derived From Pyrolysis And Copyrolysis Of Waste Plastics And Biomass, Anitha Shankaralinge Gowda, Dimitrios Karadimas, Jeffrey Seay

Chemical and Materials Engineering Faculty Publications

Pyrolysis has been proposed as a potential technology for managing the growing volume of plastic waste generated worldwide. Co-pyrolysis of plastic waste with biomass is a promising technology for generating fuel and chemical products. However, this process generates tar as a waste product. The chemical properties of this tar have yet to be thoroughly analyzed. This study presents the results of gas chromatography–mass spectrometry (GC–MS), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) of oil and tar obtained from the pyrolysis of pure plastics including high-density polyethylene (HDPE), low-density polyethylene (LDPE), polyethylene (PE), polystyrene (PS), and plastic-biomass mixtures. GC–MS analysis …

Membrane Filtration Of Nanoscale Biomaterials: Model System And Membrane Performance Evaluation For Aav2 Viral Vector Clarification And Recovery, Mara Leach, Kearstin Edmonds, Emily Ingram, Rebecca E. Dutch, Ranil Wickramasinghe, Malgorzata Chwatko, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

The growing demand for viral vectors as nanoscale therapeutic agents in gene therapy necessitates efficient and scalable purification methods. This study examined the role of nanoscale biomaterials in optimizing viral vector clarification through a model system mimicking real AAV2 crude harvest material. Using lysed HEK293 cells and silica nanoparticles (20 nm) as surrogates for AAV2 crude harvest, we evaluated primary (depth filters) and secondary (membrane-based) filtration processes under different process parameters and solution conditions. These filtration systems were then assessed for their ability to recover nanoscale viral vectors while reducing DNA (without the need for endonuclease treatment), protein, and turbidity. …

Fundamental And Application Of Co-Assembly Of Peptides And Proteins: Experiment And Computation, Newton A. Ihoeghian, Qing Shao

Chemical and Materials Engineering Faculty Publications

Peptides and proteins can co-assemble into various nanostructures based on complementary non-covalent interactions such as electrostatic forces, hydrogen bonding, and hydrophobic associations. These co-assemblies create a design space of functional materials for a wide spectrum of energy, environmental, and biomedical applications. This review focuses on the fundamentals and applications of three co-assembling systems: ultra-short peptides, peptides, and proteins. We will present and discuss experimental studies demonstrating applications in drug delivery, tissue engineering, and biomaterials development. We will also discuss the contribution of computational research, including molecular dynamics simulations and machine learning, to enhance our understanding of assembly mechanisms. Integrating experimental …

Accelerated Aging System For Pinniped Tags, Sean Shermer, Nathan Vasquez, Deekshitha Garige

Undergraduate Scholarship

This project focused on the design of an accelerated aging system intended to evaluate the durability of pinniped identification tags used in marine mammal research. The system was developed in collaboration with the Cal Poly Humboldt Marine Lab and NOAA, under the guidance of Dr. Dawn Goley, to address the limitations of field based durability testing, which is slow, inconsistent, and difficult to reproduce. The primary objective was to create a repeatable laboratory testing framework capable of simulating multiple environmental stressors experienced by pinniped tags. This includes the accelerated tests of UV radiation, mechanical abrasion, temperature cycling and biological fouling. …

Side-By-Side Evaluation Of The Outgassing Rate And Ultimate Pressure Achieved Inside Tubes Made Of Low-Carbon And Stainless Steel, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

The hydrogen outgassing rate of a vacuum chamber made of AISI 1020 low-carbon steel was found to be notably smaller than a similar chamber made of AISI 316L stainless steel following heat treatment at 150 degrees C. When the chambers were baked at 400 degrees C, the outgassing rate of the 1020 low-carbon steel chamber was approximately 2000 times smaller than that of the 316L stainless-steel chamber. After quantifying hydrogen outgassing rates, vacuum chambers made of 1020 low-carbon steel and 316L stainless steel were heated for a prescribed duration and then pumped with an ion pump and nonevaporable getter pump …

Rheology Of Alumina Suspensions Subjected To Alternating Current Electric Fields For Freeze-Casting, Sivakumar Chithamallu, Ruksana Baby, Jacob L. Jones, Dipankar Ghosh

Mechanical & Aerospace Engineering Faculty Publications

Alternating current (AC) electric field can extrinsically tune freeze‐cast microstructure, originating from field‐induced increase in viscosity of ceramic suspensions. However, the changes that occur in a ceramic suspension and rheological behavior, ultimately affecting freeze‐cast microstructure, are not well understood. Moreover, the effects of AC electrokinetic forces and temperature on viscosity need to be decoupled. The viscosity and temperature of ceramic suspensions subjected to AC field and direct heating were measured, revealing that the increase in viscosity is due to AC dielectrophoretic forces rather than field‐induced heating of suspension. The shear thinning behavior of suspensions characterized using a power‐law model reveals …

Outgassing Measurements Of Bare And Magnetite-Coated Low-Carbon Steel Vacuum Chambers, Aiman H. Al-Allaq, Md Abdullah Mamun, Matt Poelker, Abdelmageed Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

The outgassing properties of bare and magnetite-coated AISI 1020 low-carbon steel vacuum chambers were evaluated to establish material selection criteria for extreme high vacuum applications, namely, to explore the possibility of using these materials to build next-generation spin-polarized photoelectron guns. Water outgassing measurements using the throughput method revealed that the magnetite-coated chamber exhibited five times lower outgassing at room temperature prior to baking, but this advantage disappears after 80 °C baking. Hydrogen outgassing measurements demonstrated significant differences after intensive heat treatment: the bare low-carbon steel vacuum chamber achieved a specific outgassing rate of 9.6 × 10⁻¹⁶ Torr L s …

Effect Of Bioactive Glass On Pxdda / Pxdda-Co-Pla Nanocomposite For Hard Tissue Reconstruction: Synthesis And Characterization, Ehsan Vafa, Lobat Tayebi, Fatemeh Azizli, Somayeh Parham, Katayoon Rezaeeparto, Sedigheh Azadi, Ali Mohammad Amani, Mohammad Javad Azizli, Hesam Kamyab, Shreeshivadasan Chelliapan, Saravanan Rajendran

Electrical & Computer Engineering Faculty Publications

Newer bone graft materials face various challenges in achieving optimal mechanical strength, bioactivity, and antibacterial action simultaneously, which can result in suboptimal regeneration outcomes and increased infection risks In the present study, we developed a novel nanocomposite of poly (xylitol-co-dodecanedioic acid) (PXDDA) and poly (lactic acid) (PLA) with 1-10 wt% incorporation of bioactive glass (BG), utilizing a a PXDDAco-PLA compatibilizer for maintaining homogeneity. Extensive characterization techniques including, Fourier infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauere Emmette Teller (BET), Proton Nuclear Magnetic Resonance (¹H NMR) and contact angle measurements, revealed that the addition …

A Comparison Of Microcrystal Electron Diffraction And X-Ray Powder Diffraction For The Structural Analysis Of Metal-Organic Frameworks, Erik Biehler, Silvana Pagola, Daniel Stam, Johannes Merkelbach, Christian Jandl, Tarek M. Abdel-Fattah

Chemistry & Biochemistry Faculty Publications

This study successfully implemented microcrystal electron diffraction (microED) and X-ray powder diffraction (XRPD) for the crystal structure determination of a new phase, TAF-CNU-1, Ni(C₈H₄O₄)·3H₂O, solved by microED from single microcrystals in the powder and refined at the kinematic and dynamic electron diffraction theory levels. This nickel metal–organic framework (MOF), together with its cobalt and manganese analogues with formula M (C₈H₄O₄)·2H₂O with M = Mn ^II or Co^II, were synthesized in aqueous media as one-pot preparations from the corresponding hydrated metal chlorides and sodium terephthalate, as a promising `green' synthetic route to moisture-stable MOFs. The crystal structures of the …

Metathesis Or Isomerization: Counteranion Directed Reactivity Of Grubbs I, Paul D. Miller, Joe B. Calkins, Craig A. Bayse, Trandon A. Bender

Chemistry & Biochemistry Faculty Publications

Catalytic isomerization of alkenes has garnered interest for many years, but there are remaining challenges when it comes to thermodynamic selectivity and uncontrolled isomerization. Nonbiased substrates, be it sterically or thermodynamically, remain challenging for many catalysts, with a few examples available in the more modern literature. Herein, we present the controlled isomerization of linear alkenes with a cocatalytic mixture of commercially available catalyst and reagents: Grubbs I, tris(pentafluorophenyl)borane, and triethylsilane. DFT calculations indicate that an observed alkylidyne hydride intermediate is in rapid equilibrium with an alkylidene that binds the alkene substrate. This combination results in a pi-acidic metal and a …

Amphiphilic Tripodal Metalloligands: Synthesis, Coordination Chemistry And Preliminary Catalysis, Austin W. Medley, Paul D. Miller, Craig A. Bayse, Robert D. Pike, Trandon A. Bender

Chemistry & Biochemistry Faculty Publications

Triscatecholate binding has been widely studied in the context of biological systems, supramolecular chemistry, and weak aggregate interactions. However, the utilization of the triscatecholate binding motif for the preparation of metalloligands remains unexplored. Herein, we report the synthesis, structural characterization, and functional studies of a triscatecholate ligand with an appended pyridyl residue as a candidate for such applications. Our findings reveal that the selective formation of cis-triscatecholate-based metalloligands is influenced by electronic effects on the catecholate anions, enabling the targeted synthesis of Al(III), Ga(III), and In(III) triscatecholate metalloligands capable of binding Zn(II) and Ru(II) at the appended pyridyl moiety for …

Supercapacitors With Cotton Shell-Derived Activated Carbons And Porous Polymer Electrolyte Films, Saurabh Singh, Yulin Zhang, S. A. Hashmi, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Some of the well-known challenges in the field of supercapacitors (SCs), or more specifically, electrical double-layer capacitors (EDLCs), such as low energy density and high cost, have proven to be major barriers to their widespread market success despite having some excellent electrochemical merits such as high-power density and good cyclic stability. In this work, efforts have been made to overcome these gaps and eventually enhance the performance of EDLCs via a cost-effective and eco-friendly approach. To fabricate these EDLCs, a bio-waste, namely, cotton-shell-derived activated carbons (ZnACs) (activated with ZnCl2), was used in a mass ratio of 1 : 2 for …

Improvement Of Cellular Pattern Organization And Clarity Through Centrifugal Force, Lauren E. Mehanna, James D. Boyd, Shelley Remus-Williams, Nicole M. Racca, Dawson P. Spraggins, Martha E. Grady, Brad J. Berron

Chemical and Materials Engineering Faculty Publications

Rapid and strategic cell placement is necessary for high throughput tissue fabrication. Current adhesive cell patterning systems rely on fluidic shear flow to remove cells outside of the patterned regions, but limitations in washing complexity and uniformity prevent adhesive patterns from being widely applied. Centrifugation is commonly used to study the adhesive strength of cells to various substrates; however, the approach has not been applied to selective cell adhesion systems to create highly organized cell patterns. This study shows centrifugation as a promising method to wash cellular patterns after selective binding of cells to the surface has taken place. After …

Integrating Protein Language Model And Molecular Dynamics Simulations To Discover Antibiofouling Peptides, Ibrahim A. Imam, Shea Bailey, Duolin Wang, Shuai Zeng, Dong Xu, Qing Shao

Chemical and Materials Engineering Faculty Publications

Antibiofouling peptide materials prevent the nonspecific adsorption of proteins on devices, enabling them to perform their designed functions as desired in complex biological environments. Due to their importance, research on antibiofouling peptide materials has been one of the central subjects of interfacial engineering. However, only a few antibiofouling peptide sequences have been developed. This narrow scope of antibiofouling peptide materials limits their capacity to adapt to the broad spectrum of application scenarios. To address this issue, we searched for antibiofouling peptides in the vast sequence pool of the microbiome library using a combination of deep learning-based high-throughput search and molecular …

Clarifying The Role Of Η-Phase With Varying Chemistry On Localised Corrosion Of A Cu-Containing 7xxx Al-Alloy By Quasi-In-Situ Tem, S. K. Kairy, Y. Wu, S. Turk, A. Shekhter, Rudolph Buchheit, N. Birbilis

Chemical and Materials Engineering Faculty Publications

Quasi-in-situ transmission electron microscopy was employed to study dissolution associated with η-phase (Mg(Zn,Al,Cu)₂) precipitates in a Cu-containing 7xxx Al-alloy. Two distinct η-phase chemistries, with Cu to (Zn+Mg+Al) ratios ∼0.12 and ∼0.2, were studied in 0.01 M NaCl at pH 6 and 2. In near-neutral NaCl, both η-phase precipitates exhibited ‘duplex’ behaviour, i.e., they were primarily more noble with respect to the surrounding Al-matrix, causing matrix dissolution, and simultaneously established nanoscopic active sites within the noble precipitate itself by generating nanoscale pits. Conversely, η-phase precipitates rapidly dealloyed in acidic NaCl, forming nocrystalline Cu remnants containing twins, which subsequently caused …

Enhancing Intrinsic Ductility In Vnbmotaw High Entropy Alloy: A Combinatorial Investigation With Experimental Evaluation Of Theoretical Predictions, Taohid Bin Nur Tuhser, Ian Stewart Winter, Daryl Chrzan, Thomas John Balk

Chemical and Materials Engineering Faculty Publications

The application of refractory high entropy alloys (RHEAs) as engineering materials has been hindered by their poor inherent ductility. In this study, a novel approach combining thin film combinatorial screening with fragmentation testing was employed to identify intrinsically ductile alloy compositions. Inspired by the physics-based intrinsic ductility parameter, the ‘χ-parameter,’ we investigated the replacement of group VI elements (W/Mo) with group V elements (V, Nb, Ta) in the VNbMoTaW system. Conventional combinatorial analyses, including composition, phase, and hardness assessments, were conducted across a wide range of non-equiatomic configurations. The results revealed a broad compositional space favoring a single-phase body-centered cubic …

Understanding Roof Systems Of Metal Buildings, Michael W. Seek, Vincent E. Sagan

Engineering Technology Faculty Publications

[Introduction] A metal building is a system with complex behavior that, when properly accounted for, provides an efficient structural solution. To help the engineer properly design for this behavior, the Metal Building Manufacturers (MBMA) has recently released the Roof Framing Design Guide for Metal Building Systems, 2nd Edition (Roof Framing Design Guide).

Investigation Of New Superconducting Materials For The Next Generation High-Performance Rf Superconducting Cavities For Particle Accelerators, Alex Gurevich, Jean Delayen, Chang-Beom Eom, Gianluigi Ciovati

Physics Faculty Publications

In this DOE-funded project DE-SC0010081-020 Old Dominion University (ODU) in collaboration with University of Wisconsin (UW) and Jefferson Laboratory have investigated both experimentally and theoretically electromagnetic response and losses in multilayered superconducting structures made of new SRF materials which can push the field and Q performance limits of accelerating cavities.

Hydrogen Permeation In Iron-Chromium-Aluminum (Fecral) Alloys And The Effects Of Microstructure And Surface Oxide, Nathan T. Gehmlich, Thomas F. Fuerst, Hanns Gietl, Chase N. Taylor, Joshua Rittenhouse, Haiming Wen, M. Nedim Cinbiz

Materials Science and Engineering Faculty Research & Creative Works

Iron–chromium–aluminum (FeCrAl) class alloys are candidates for use as cladding for accident-tolerant fuels and moderators. In this context, hydrogen isotope permeation in FeCrAl alloys is an important material property. In the present work, the apparent permeability, effective diffusivity, and apparent solubility of hydrogen in the FeCrAl alloys C26M and Kanthal D (KD) were measured with gas-driven hydrogen permeation. Permeation measurements were conducted at temperatures of 400 to 700 °C and at gas-driven pressures from 1 to 100 kPa. In particular, the effect of grain size on hydrogen transport was studied with KD samples with three different microstructures: nanocrystalline (NC), ultra-fine …

Dual-Bed Radioiodine Capture From Complex Gas Streams With Zeolites: Regeneration And Reuse Of Primary Sorbent Beds For Sustainable Waste Management, Krista Carlson, Brian J. Riley, Joshua Turner, David C. Cantu, Dev Chidambaram, Charmayne Lonergan, Jeffrey D. Rimer

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Degradation Of Radioactive Waste Encapsulation Of Bao−Feox−P2o5 Glass Evaluated From Electrical Conductivity, Kazuki Mitsui, Nobuyasu Nishioka, Hiromichi Takebe, Richard K. Brow, Akira Saitoh

Materials Science and Engineering Faculty Research & Creative Works

We report on the electrical conductivity of barium iron phosphate glass, a candidate for radioactive waste encapsulating glass. The glass composition has been optimized for slow dissolution in hot water because the precipitation of a stable hydration layer of FeO(OH) on the glass surface enhances the water durability of the glass. The mechanism of electrical conductivity of the glass is assumed to be an electron hopping between the electronic energy levels of Fe (II) and Fe (III) ions, obeying the electron carrier generation of Fe (II) → Fe (III) + e−. The electrical conductivity of the base glass was ∼3.2 …

Designing Robust Quasi-2d Perovskites Thin Films For Stable Light-Emitting Applications, Sharmistha Khan, Reshna Shrestha, Mengru Jin, Doyun Kim, Guan Lin Chen, Ruipeng Li, Yijia Gu, Qing Tu, Namyoung Ahn, Wanyi Nie

Materials Science and Engineering Faculty Research & Creative Works

Quasi-2D perovskite made with organic spacers co-crystallized with inorganic cesium lead bromide inorganics is demonstrated for near unity photoluminescence quantum yield at room temperature. However, light emitting diodes made with quasi-2D perovskites rapidly degrade which remains a major bottleneck in this field. In this work, It is shown that the bright emission originates from finely tuned multi-component 2D nano-crystalline phases that are thermodynamically unstable. The bright emission is extremely sensitive to external stimuli and the emission quickly dims away upon heating. After a detailed analysis of their optical and morphological properties, the degradation is attributed to 2D phase redistribution associated …

Ground Testing Of A Magnetic-Electrostatic Separation System For Lunar Regolith Beneficiation, Peter Bachle, Charles Wood, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

The separation of lunar regolith by mineral composition and size category is useful forin-situ resource utilization (ISRU). The research presented herein discusses the designing and development of equipment that has the potential to separate lunar regolith into aluminum, iron-titanium, and magnesium-iron ores. Along with the metal ore separation, this equipment shows the potential to separate regolith by size categories. The combined effect of these separation methods generates output that is valuable to subsequent use in metal and oxygen extraction, additive manufacturing, and regolith sintering processes. The designed equipment uses a dual-strength magnet system with N42 and N52 neodymium magnets for …