Engineering Commons^™

The Stability And Oxidation Resistance Of Iron- And Cobalt-Based Magnetic Nanoparticle Fluids Fabricated By Inert-Gas Condensation, Nguyen H. Hai, Raymond Lemoine, Shaina Remboldt, Michelle A. Strand, Steve Wignall, Jeffrey E. Shield, Diandra Leslie-Pelecky

Materials Research Science and Engineering Center: Faculty Publications

Magnetic nanoparticle fluids have numerous biomedical applications, including magnetic imaging, drug delivery, and hyperthermia treatment for cancer. Ideal magnetic nanoparticle fluids have well-separated, biocompatible nanoparticles with a small size distribution that form a stable colloid. We have combined inert-gas condensation, which produces nanoparticles with low polydispersity, with deposition directly into a surfactant-laden fluid to prevent agglomeration. Iron, cobalt, and iron-nitride nanoparticle fluids fabricated using inert-gas condensation have with mean particle sizes from 5-50 nm and remain stable over long periods of time. Iron and cobalt nanoparticles oxidize on exposure to air, with oxidation rates dependent on surfactant type and concentration. …

Research Experiences For Teachers In Materials Science: A Case Study, Michelle A. Strand, Steve Wignall, Diandra Leslie-Pelecky

Materials Research Science and Engineering Center: Faculty Publications

The National Science Education Standards encourage teachers to become involved in research as ‘representatives of science in the classroom’. The Research Experiences for Teachers program affiliated with the Materials Research Science and Engineering Center at the University of Nebraska involves teachers in research on nanoscale magnetic and electronic structures over a summer. Two teachers and a sponsoring researcher share their experiences and what they believe are necessary elements for successful RET experiences.

Multiscale Phenomena In Bruggeman Composites, Ralph Skomski, Jiangyu Li, Jian Zhou, David J. Sellmyer

Materials Research Science and Engineering Center: Faculty Publications

Mechanical, magnetic, and transport properties of arbitrary inhomogeneous composites are investigated by a Bruggeman-type mean-field approach. The theory yields materials parameters as functions of the volume fractions, geometries, and materials constants of the phases. Each system is described by a single response parameter g, which is equal to the percolation threshold of the composite. For macroscopic systems, the approach yields very simple expressions, but nanoscale and multiferroic effects yield relatively complicated corrections to g. In the respective cases, the parameter g depends on the length scale of the composite and has the character of a combination of magnetic, electric, and …

Unsteady Tip Leakage, Bow Shock, Igv Wake Interaction In A Compressor, Xuedong Zhou, J. Mitch Wolff

Mechanical and Materials Engineering Faculty Publications

Unsteady aerodynamic analysis of Inlet Guide Vane (IGV)/rotor interaction is conducted with a commercial CFD solver, STAR-CD. 12% and 26% IGV axial chord IGV/Rotor spacing configurations were examined for 100% corrected speed at choke, peak efficiency and near stall conditions to investigate bow shock/tip leakage interaction within blade rows. Comparison with IGV surface unsteady pressure experimental data indicates good agreement at the IGV trailing edge across the span for both spacing configurations; therefore, validating the modeling of the high speed, highly loaded transonic compressor. The strongest effect on the tip clearance flow physics was caused by decreasing the axial spacing. …

High Voltage Bias Testing And Degradation Analysis Of Photovoltaic Modules, Vinaykumar Hadagali

Electronic Theses and Dissertations

This thesis mainly focuses on two important aspects of the photovoltaic modules. The first aspect addressed the high voltage bias testing and data and degradation analysis of high voltage biased thin film photovoltaic modules. The second aspect addressed the issues of reliability and durability of crystalline silicon module. Grid-connected photovoltaic systems must withstand high voltage bias in addition to harsh environmental conditions such as intermittent solar irradiance, high humidity, heat and wind. a-Si:H thin-film photovoltaic modules with earlier generation SnO2:F transparent conducting oxide (TCO) on the front glass installed on the FSEC High Voltage Test Bed were monitored since December …

Nmr And Modulated Differential Scanning Calorimetry Of Adsorbed Poly(Methyl Acrylate) On Silica, Frank D. Blum, Burak Metin

Chemistry Faculty Research & Creative Works

The interaction between polymers and solid substrates can be studied by a variety of techniques. The results from different experiments can be affected by the nature of the polymer, surface, polymer-surface interactions and, also, the experiment. A great deal has been learned about the behavior of polymers at interfaces, but there is also much to be learned about the interactions and how they affect the physical properties of adsorbed polymers. In the present study, we report both deuterium nuclear magnetic resonance (NMR) and modulated differential scanning calorimetry (MDSC) of poly(methyl acrylate) (PMA) adsorbed on Cab-O-Sil silica. The focus of this …

Data Management And Visualization Of X-Ray Diffraction Spectra From Thin Film Ternary Composition Spreads, I. Takeuchi, C. J. Long, O. O. Famodu, M. Murakami, Jason R. Hattrick-Simpers, G. W. Rubloff, M. Stukowski, K. Rajan

Faculty Publications

We discuss techniques for managing and visualizing x-ray diffraction spectrum data for thin film composition spreads which map large fractions of ternary compositional phase diagrams. An in-house x-ray microdiffractometer is used to obtain spectra from over 500 different compositions on an individual spread. The MATLAB software is used to quickly organize the data and create various plots from which one can quickly grasp different information regarding structural and phase changes across the composition spreads. Such exercises are valuable in rapidly assessing the “overall” picture of the structural evolution across phase diagrams before focusing in on specific composition regions for detailed …

Arc-Discharge In Solution: A Novel Synthesis Method For Carbon Nanotubes And In Situ Decoration Of Carbon Nanotubes With Nanoparticles, Debasis Bera

Electronic Theses and Dissertations

Nanotechnology has reached the status of the 21st century's leading science and technology based on fundamental and applied research during the last two decades. An important feature of nanotechnology is to bridge the crucial dimensional gap between the atomic and molecular fundamental sciences and microstructural scale of engineering. Accordingly, it is very important to have an in-depth understanding of the synthesis of nanomaterials for the use of state-of-the-art high technological devices with enhanced properties. Recently, the 'bottom-up' approach for the fabrication of nanomaterials has received a great deal of attention for its simplicity and cost effectiveness. Tailoring the various parameters …

Transmission Electron Microscopy Studies In Shape Memory Alloys, Madhavi Tiyyagura

Electronic Theses and Dissertations

In NiTi, a reversible thermoelastic martensitic transformation can be induced by temperature or stress between a cubic (B2) austenite phase and a monoclinic (B19') martensite phase. Ni-rich binary compositions are cubic at room temperature (requiring stress or cooling to transform to the monoclinic phase), while Ti-rich binary compositions are monoclinic at room temperature (requiring heating to transform to the cubic phase). The stress induced transformation results in the superelastic effect, while the thermally induced transformation is associated with strain recovery that results in the shape memory effect. Ternary elemental additions such as Fe can additionally introduce an intermediate rhombohedral (R) …

Development Of Transparent And Conducting Back Contacts On Cds/Cdte Solar Cells For Photoelectrochemical Application, Upendra Sureshchandra Avachat

Electronic Theses and Dissertations

The development of devices with high efficiencies can only be attained by tandem structures which are important to the advancement of thin-film photoelectrochemical (PEC) and photovoltaic (PV) technologies. FSEC PV Materials Lab has developed a PEC cell using multiple bandgap tandem of thin film PV cells and a photocatalyst for hydrogen production by water splitting. CdS/CdTe solar cell, a promising candidate for low-cost, thin-film PV cell is used as one of the thin film solar cells in a PEC cell. This research work focuses on developing various back contacts with good transparency in the infrared region (~750 - 1150 nm) …

Interdiffusion Analysis For Nicocraly And Nial Vs. Various Superalloys, Emmanuel Perez

Electronic Theses and Dissertations

Hot section components in gas turbines can be NiCoCrAlY-coated to provide the component with an Al reservoir that maintains a protective oxide layer on its surface. Over the service life of the component, the coatings degrade by composition and phase changes due to oxidation/hot-corrosion, and multicomponent interdiffusion from and into the superalloy substrate. In this study, the rate of Al interdiffusion into selected Ni-base superalloys using various diffusion couples of two-phase NiCoCrAlY (beta + gamma) and single beta-phase NiAl with the selected alloys is measured. The diffusion couples were examined with an emphasis on the composition-dependence of Al interdiffusion. Microstructural …

Solar Driven Photoelectrochemical Water Splitting For Hydrogen Generation Using Multiple Bandgap Tandem Of Cigs2 Pv Cells And Thin Film Photocatalyst, Anant Jahagirdar

Electronic Theses and Dissertations

The main objective of this research was to develop efficient CuIn1-xGaxS2 (CIGS2)/CdS thin film solar cells for photoelectrochemical (PEC) water splitting to produce very pure hydrogen and oxygen. Efficiencies obtained using CIGS2 have been lower than those achieved using CuInSe2 and CuIn1-xGaxSe2. The basic limitation in the efficiencies is attributed to lower open circuit voltages with respect to the bandgap of the material. Presently, the main mechanism used to increase the open circuit voltage of these copper chalcopyrites (CuInSe2 and CuInS2) is the addition of gallium. However, addition of gallium has its own challenges. This research was intended to (i) …

Instrumented Nanoindentation Studies Of Deformation In Shape Memory Alloys, Sudhir Rajagopalan

Electronic Theses and Dissertations

Near equi-atomic nickel titanium (NiTi) shape memory alloys (SMAs) are a class of materials characterized by their unique deformation behavior. In these alloys, deformation mechanisms such as mechanical twinning and stress induced phase transformation between a high symmetry phase (austenite) and a low symmetry phase (martensite) additionally occur and influence mechanical behavior and thus their functionality. Consequently, applications of SMAs usually call for precise phase transformation temperatures, which depend on the thermomechanical history and the composition of the alloy. Instrumented indentation, inherently a mechanical characterization technique for small sampling volumes, offers a cost effective means of empirically testing SMAs in …

Approaches Toward Integrating Functionality Into Structural Materials, Rajiv S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Alloy Recovery And Control In Steel Melting, Kent D. Peaslee, Darryl S. Webber, Semen Naumovich Lekakh, Bradley Randall

Materials Science and Engineering Faculty Research & Creative Works

Alloy recovery plays an important role in steel melting economics because the cost of alloying additives such as ferroalloys and pure non-ferrous metals is significantly higher than the cost of steel scrap. Recovery of alloying additives also influences the reproducibility of steel properties from heat to heat. This paper reviews alloy recovery and final chemistry distributions at seven steel foundries and preliminary laboratory studies of alloy dissolution in ladles. Melting and alloy practices were observed for several plant trial heats in each of the foundries. Alloying and chemistry data were collected for an additional 20 - 155 heats at each …

Efficiency In Steel Melting: Ladle Development, Kent D. Peaslee, Semen Naumovich Lekakh, Todd P. Sander, Jeffrey D. Smith

Materials Science and Engineering Faculty Research & Creative Works

Effective ladle design and use is important for steel casting production. In foundry operations, the ladle temperature of the liquid steel is typically 150 to 250°F above the steel's melting point to compensate for the heat losses in small ladles and the associated high cooling rates from the large surface area to volume ratios. Higher superheat is also necessary to provide sufficient steel fluidity to properly fill the mold cavity. In spite of the relatively short time that the steel is in contact with the ladle lining, the huge thermal gradients in the lining drive high values of heat flow …

Coupled Electrical And Magnetic Properties In (La,Sr)Feo3-Δ, X.-D. Zhou, Qingsheng Cai, Jinbo Yang, M. S. Kim, William B. Yelon, William Joseph James, Y.-W. Shin, B. J. Scarfino, Harlan U. Anderson

Materials Science and Engineering Faculty Research & Creative Works

This article is aimed at studying the temperature dependence oxygen nonstoichiometry, magnetic moments, Fe³⁺ fraction, Néel temperature and conductivity of (La,Sr)FeO_3-δ. It is found that the magnetic properties in La_0.60 Sr_0.40 Fe_3-δ is determined by Fe³⁺ and its concentration, and the conductance is resulted from Fe⁴⁺ ions, which act as electron holes. Both of magnetic and electrical properties were directly governed by oxygen nonstoichiometry (δ). when δ=0.2, the compound has maximum Fe³⁺, the saturation magnetic moments and Néel temperature are 3.8 µB and 410 °C, both at the highest level, …

Efficiency In Steel Melting: Opportunities And Progress, Kent D. Peaslee, Semen Naumovich Lekakh, Von Richards, Jay Triplett

Materials Science and Engineering Faculty Research & Creative Works

This paper summarizes the findings from a study of melting efficiency in steel foundries and provides examples of material and energy savings from improvements in technology and melting practices. This study is based on information gathered at 19 Steel Founders Society of America member foundries and includes a combination of historical data and industrial measurements by the research team. Information and data were collected on the type of melting equipment, melting practices, energy use and ladle practices. The data was statistically analyzed using STATGRAPHICS commercial software. A multiple regression analysis allowed evaluation of the influence of the melting furnace (type, …

Study Of The Electronic Structure Of Cafeo₃, Jinbo Yang, M. S. Kim, Qingsheng Cai, X.-D. Zhou, Harlan U. Anderson, William Joseph James, William B. Yelon

Materials Science and Engineering Faculty Research & Creative Works

We have studied the charge disproportionation phenomenon in CaFeO3 using the local-spin density approximation with the on-site Coulomb interaction parameter U and exchange parameter J. The calculation reveals that the total number of the 3d electrons is about 5.1 for both Fe(1)(Fe5+) and Fe(2)(Fe3+) atoms, and that there are about 0.25 electron holes in the O-2p band. Therefore, the charge disproportionation can be more accurately described as 2d5L(Fe4+)=d5L2(Fe5+)+d5(Fe3+), where L denotes a hole in the oxygen 2p band, instead of 2d4(Fe4+)=d3(Fe5+)+d5(Fe3+). The hybridization between the Fe-3d and O-2p orbitals is stronger for Fe(1) than for Fe(2) due to the shorter …

Dissolution, Reactor, And Environmental Behavior Of Zro2-Mgo Inert Fuel Matrix, Kenneth Czerwinski

Fuels Campaign (TRP)

This project examines inert fuels containing ZrO₂ and MgO as the inert matrix, with the relative amount of MgO varied from 30% to 70% in ZrO₂. Reactor physics calculations are used to examine suitable quantities of burnable poisons from the candidate elements Gd, Er, or Hf with reactor grade Pu providing the fissile component, with up to 10% of ²³⁹Pu. Ceramics are synthesized and characterized based on the reactor physics results. The solubility of the fuel ceramics, in reactor conditions, reprocessing conditions, and repository conditions, are investigated in a manner to provide thermodynamic data necessary for …

The Effect Of Cu-Doping On The Magnetic And Transport Properties Of La₀.₇Sr₀.₃Mno₃, M. S. Kim, Jinbo Yang, Qingsheng Cai, X.-D. Zhou, William B. Yelon, Paul Ernest Parris, William Joseph James

Physics Faculty Research & Creative Works

The effects of Cu-doping on the structural, magnetic, and transport properties of La0.7Sr0.3Mn1xCuxO3 (0<=x<=0.20) have been studied using neutron diffraction, magnetization, and magnetoresistance (MR) measurements. All samples show the rhombohedral structure with the R[overline 3]c space-group from 10 K to room temperature (RT). Neutron diffraction data suggest that some of the Cu ions have a Cu3+ state in these compounds. The substitution of Mn by Cu affects the MnO bond length and Mn-O-Mn bond angle resulting from the minimization of the distortion of the MnO6 octahedron. Resistivity measurements show that a metal to insulator transition occurs for the x>=0.15 samples. The x=0.15 sample shows the highest MR([approximate]80%), which might result from the co-existence of Cu3-Cu2+ and the dilution effect of Cu-doping on the double exchange interaction

Investigation Of Ferroelectricity In Newly Synthesized Nitrile Polymer Systems, Matt Poulsen, Stephen Ducharme, Alexander V. Sorokin, Sahadeva Reddy, James M. Takacs, Y. Wen, Jihee Kim, Shireen Adenwalla

Stephen Ducharme Publications

The ferroelectric and piezoelectric properties of newly synthesized polymer systems have been studied. To date PVDF and its copolymers P(VDF-TrFE) have provided the bulk of the knowledge pertaining to ferroelectricity in polymers. Recently, ultrathin ferroelectric films of P(VDF-TrFE) 70:30 have been fabricated using the Langmuir-Blodgett technique [4]. In this study, various new polymers have been synthesized by chemically altering the PVDF structure. This alteration was performed in order to enhance the amphiphilic nature of the polymer and thus improve the LB film quality and control. Various chemical groups have been used to replace the electropositive hydrogen and electronegative fluorine found …

Boron-Rich Semiconducting Boron Carbide Neutron Detector, Andrew D. Harken, Ellen E. Day, Brian W. Robertson, Shireen Adenwalla

Shireen Adenwalla Papers

Data on the neutron detection capabilities of a variety of boron carbide/Si heterojunction diodes is presented. The pulse height spectra are compared with previously measured conversion layer devices and the variations in shape and position of the peaks are discussed.

Tunable Multiferroic Properties In Nanocomposite Pbtio3-Cofe2O4 Epitaxial Thin Films, M. Murakami, K.-S. Chang, M. A. Aronova, C.-L. Lin, Ming H. Yu, Jason R. Hattrick-Simpers, M. Wuttig, I. Takeuchi, C. Gao, B. Hu, S. E. Lofland, L. A. Knauss, L. A. Bendersky

Faculty Publications

We report on the synthesis of PbTiO₃–CoFe₂O₄ multiferroic nanocomposites and continuous tuning of their ferroelectric and magnetic properties as a function of the average composition on thin-film composition spreads. The highest dielectric constant and nonlinear dielectric signal was observed at (PbTiO₃)₈₅–(CoFe₂O₄)₁₅, where robust magnetism was also observed. Transmission electron microscopy revealed a pancake-shaped epitaxial nanostructure of PbTiO₃ on the order of 30 nm embedded in the matrix of CoFe₂O₄ at this composition. Composition dependent ferroics properties observed here indicate that there …

Mechanics Of Composite Materials In Fuel Cell Systems, Kenneth Reifsnider, Xinyu Huang, G. Ju, Matthew Feshler, K. An

Faculty Publications

The science and technology that are fundamental to the concept of composite materials are also the foundation for the construction and function of fuel cells and fuel cell systems. The present paper outlines this relationship in the context of the physics and chemistry that are enabled by the specific selection and arrangement of constituents of the “functional composite” fuel cell. General principles of operation are described, and fundamental issues are defined that must be addressed by the composites community if the fuel cell science and engineering is to advance. Examples of several types of functional composite fuel cells are presented, …

Microwave Processing Of Fiber Reinforced Composites (Optimization Of Glass Reinforced Epoxy Curing Process), Mohamed Osama Ali

Theses

Microwave curing of polymer matrix composites has proven to be an attractive substitute for conventional thermal curing. Industrial applications are currently developed including telecommunications, aerospace, food industry, enhancement concrete setting, composites manufacturing, and many others. Many universities and research centers around the globe are endeavoring to make use of this technology to the most. Common research objectives include homogeneity of the cure, the acceleration of cure kinetics, cure reaction mechanism, and enhancement of mechanical properties. In order to efficiently utilize this form of energy, precise control over power, temperature, and time were applied to achieve set goals: reduce cure time …

Effect Of Bond Thickness On Lifetime Of Adhesive Joints, Ehab Mohammed El-Said El-Refaai Shehab

Theses

The aim of this research was to study the effect of bond thickness on the fracture energy and the lifetime of an adhesively bonded system and develop a model to predict the lifetime of adhesive joints. An approach based on fracture mechanics was employed to assess aluminum/epoxy bond lifetime. An experimental investigation was carried out using double cantilever beam (DCB) specimens with various bond thicknesses under mode 1.

This study describes an approach to predict the rate of crack propagation using Paris' power law. The approach used elevated temperatures to accelerate the crack propagation under constant loads. The elevated temperatures …

Ductile Crack Growth Emanating From Sharp Notes In A Low Alloy Steel, Aladdin I. Abu-Assi

Theses

Stable crack growth behavior emanating from a sharp notch is investigated. Material chosen for tests was EN 34 NiCrMo6 low alloy steel (akin to 4340/4330). Tests were carried out on CT specimens for various angles and ratios to obtain load vs, load-line displacement, Ρ-Δ_LL, curves. Experimental results were analyzed. A normalization approach of Ρ-Δ_{LL curves has been attempted and all experimental curves were represented as a single characteristic curve. Such approach has been also applied on experimental data available from other experimental investigations and results were encouraging, as it may address transferability issue. Fracture surfaces were …}

Investigation Of Epoxy Resin Spreading On Glass Surfaces, Haneen Nemer Al-Dahdooh

Theses

The spreading of a small epoxy resin droplet (l.5tL) on a glass surface was examined with the objective of developing a new type of hydrophobic polymer coated glass which has the ability to reduce heat gain inside a building. The study covered three main aspects; the spreading kinetics of epoxy resin on a glass surface, the hydophopicity of the developed polymer-coated glass surface, and the reduction of solar radiation of this surface, As wettability and spreading phenomena arc a fundamental prerequisite for coating, the spreading kinetics of different curing agent concentrations (15:200, 18:200, 21:200) of epoxy resin on the glass …

Investigations Of The Kinetics Of Liquid Droplets On Soil Substrates Using A Novel Approach: Contact Ratio, Abdelhafiz “Moh’D Adnan” Herbawi

Theses

In view of young’s equation, in which the contact angle “ϑ” and the liquid surface tension γ_lv are the only measurable parameters, the contact angle has been widely conceived as a thermodynamic quantity. Accordingly “ϑ” has been the main focus of most theoretical and experimental investigations. The rate of change in the contact angle has been commonly used as the relevant parameter of spreading dynamics in spite of difficulties associated with contact angle measurements that are well recognized in the literature. Considering that the velocity of the contact line is the pertinent quantity for spreading, it is therefore reasonable …