Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 13471 - 13500 of 16703

Full-Text Articles in Engineering

Tensile Stress Rupture Behavior Of A Woven Ceramic Matrix Composite In Humid Environments At Intermediate Temperature, Kevin J. Larochelle Mar 2005

Tensile Stress Rupture Behavior Of A Woven Ceramic Matrix Composite In Humid Environments At Intermediate Temperature, Kevin J. Larochelle

Theses and Dissertations

Stress rupture tests on the SylramicTM fiber with an in-situ layer of boron nitride, boron nitride interphase, and SiC matrix ceramic matrix composite were performed at 550°C and 750°C with 0.0, 0.2, or 0.6 atm partial pressure of water vapor, pH2O. The 550°C, 100-hr strengths were 75%, 65% and 51% of the monotonic room temperature tensile strength, respectively. At 750°C, the strengths were 67%, 51%, and 49%, respectively. Field Emission Scanning Electron Microscopy analysis estimated the total embrittlement times for 550°C with 0.0, 0.2, and 0.6 atm pH2O were >63 hrs, >38 hrs, and between …

Go to article

Dissolution, Reactor, And Environmental Behavior Of Zro2-Mgo Inert Fuel Matrix: Quarterly Report, January 2005 To March 2005, Earl Wolfram, Thomas Hartmann, Kenneth Czerwinski Mar 2005

Dissolution, Reactor, And Environmental Behavior Of Zro2-Mgo Inert Fuel Matrix: Quarterly Report, January 2005 To March 2005, Earl Wolfram, Thomas Hartmann, Kenneth Czerwinski

Fuels Campaign (TRP)

This project will examine inert matrix fuels containing ZrO2 and MgO as the inert matrix, with the relative amount of MgO varied from 30% to 70% in ZrO2. Reactor physics calculations will be used to examine suitable quantities of burnable poisons from the candidate elements Gd, Er, or Hf with reactor grade Pu providing the fissile component, with up to 10% of 239Pu. Ceramics will be synthesized and characterized based on the reactor physics results. The solubility the fuel ceramics, in reactor conditions, reprocessing conditions, and repository conditions, will be investigated in a manner to provide …

Go to article

An Investigation Of A Simplified Gouging Model, Gregory S. Rickerd Mar 2005

An Investigation Of A Simplified Gouging Model, Gregory S. Rickerd

Theses and Dissertations

Gouging is a type of structural failure that becomes important when two metals slide against each other at velocities in the range of 1.5 kilometers per second. A computer model has previously been used to model the development of gouging at the Holloman High Speed Test Track. This model has not been experimentally verified to be correct, due to the complexity of the model. This research develops a simplified model that can be experimentally verified. The computer program utilized in this research was studied to determine the most appropriate options to use in simulations. This was accomplished by modeling a …

Go to article

Application Of Functionally Graded Materials In Aircraft Structures, William G. Cooley Mar 2005

Application Of Functionally Graded Materials In Aircraft Structures, William G. Cooley

Theses and Dissertations

A Functionally Graded Material (FGM) is a material which has a continuous variation of material properties through-the-thickness. This thesis will explore analysis of FGM flat plates and shell panels, and use FGM's unique characteristics to retrofit a cracked exhaust wash structure. FGMs are first characterized as flat plates under pressure and thermal loading. Next, FGM shell panels are characterized under thermal loading. Conclusions drawn from FGM characterization are used to develop a patch to retrofit a cracked aircraft exhaust wash structure. The exhaust wash structure is first analyzed to provide a baseline and then several FGM patches are evaluated on …

Go to article

Creep Behavior Of An Oxide/Oxide Composite With Monazite Coating At Elevated Temperatures, Sean S. Musil Mar 2005

Creep Behavior Of An Oxide/Oxide Composite With Monazite Coating At Elevated Temperatures, Sean S. Musil

Theses and Dissertations

This study focuses on experimental investigation of stress-rupture behavior (creep response) of an oxide/oxide composite in a cross-ply (0/90) lay-up at elevated temperature. The test material, Nextel 610/monazite/alumina composite, employs monazite, an oxidation-resistant interfacial coating designed to improve performance at elevated temperatures. The experimental program included monotonic tensile tests to failure and creep-rupture tests at elevated temperatures. Tensile tests served to establish an ultimate tensile strength (UTS) for the material. The ensuing creep-rupture tests involved stress levels at varying percentages of the UTS. Stress-rupture curves at 900 and 1100 degrees C were established. A family of creep curves for various …

Go to article

Dynamic Characterization Of Thin Deformable Pvdf Mirror, Eric M. Trad Mar 2005

Dynamic Characterization Of Thin Deformable Pvdf Mirror, Eric M. Trad

Theses and Dissertations

Methodology for the design and fabrication of 5 inch diameter membrane-like mirror structures is explored, resulting in test articles with areal densities as low as 1.57 kg/m2 and a thickness of 1.5 mm. Each optical structure has 7 control patches etched into the PVDF layer, which can be used as actuators. These test articles are utilized to demonstrate the capabilities of an acquisition system to make measurements of static and dynamic actuation of the mirror surface. Static deformations are analyzed statistically and determined to yield maximum deformations in the actuated regions of -2.1 micro with a standard deviation of 0.33 …

Go to article

Effects Of Temperature And Shot-Peening Intensity On Fretting Fatigue Behavior Of Titanium Alloy Ti-6al-4a, Salman Albinali Mar 2005

Effects Of Temperature And Shot-Peening Intensity On Fretting Fatigue Behavior Of Titanium Alloy Ti-6al-4a, Salman Albinali

Theses and Dissertations

Effects of temperature and shot-peening intensity on fretting fatigue behavior of Ti-6Al-4A were investigated in this study. S-N curves were obtained for both room and elevated temperatures (260 C) for two different shot-peened intensities (4A and 10A). Stress relaxation behavior under both fretting fatigue at elevated temperature and temperature exposure only were also investigated after their measurements were calculated using X-ray diffraction method. The crack initiation location and the crack angle orientation along the surface were determined using optical and scanning electron microscopy (SEM). Cracks initiated near the trailing edge of the tested specimens. Cracks initiated on the contact surface …

Go to article

Biaxial Fatigue Behavior Of Niti Shape Memory Alloy, Daniel M. Jensen Mar 2005

Biaxial Fatigue Behavior Of Niti Shape Memory Alloy, Daniel M. Jensen

Theses and Dissertations

Nitinol is a shape memory alloy (SMA) capable of martensite-to-austenite phase transformations enabling shape-memory behavior. Shape-memory properties make Nitinol a strong candidate material for use in aircraft applications such as actuators. Structural integrity and reliability of torque tube actuators must be assured before this material can be used in flight-critical components. Thorough understanding of the fatigue response of the material is essential for a structurally-sound SMA actuator design. The present effort investigates pure torsion and combined tension-torsion fatigue behavior of Nitinol at room temperature. Monotonic tests in tension and torsion were conducted to typify uni-directional stress-strain behavior. Fully-reversed torsion fatigue …

Go to article

Effect Of Temperature And Steam Environment On Fatigue Behavior Of An Oxide-Oxide Continuous Fiber Ceramic Composite, Chalene A. Eber Mar 2005

Effect Of Temperature And Steam Environment On Fatigue Behavior Of An Oxide-Oxide Continuous Fiber Ceramic Composite, Chalene A. Eber

Theses and Dissertations

There is an ever-increasing need for materials that maintain high strength and fracture toughness at elevated temperatures and in complex environments. Advanced aerospace applications are motivating the development of composite materials that can meet demanding requirements. This research effort investigates mechanical behavior of an oxide-oxide continuous fiber ceramic composite (CFCC) consisting of a porous alumina matrix reinforced with mullite/alumina Nextel 720 fibers developed specifically for advanced aerospace applications. Tension-tension fatigue behavior of this CFCC was studied at 1200 and 1330 °C in laboratory air and 100% steam environments. Fatigue resistance and retained strength properties were determined. Effects of environmental degradation …

Go to article

Thermal Characteristics Of Pitch Based Carbon Foam And Phase Change Materials, Kevin W. Wierschke Mar 2005

Thermal Characteristics Of Pitch Based Carbon Foam And Phase Change Materials, Kevin W. Wierschke

Theses and Dissertations

Phase-change thermal energy storage devices offer thermal control systems an option that allows a smaller heat sink to be used by absorbing the thermal energy quickly and storing it in the phase change to prevent failure of electronic components and then slowly releasing the heat to the heat sink. This paper experimentally determined the transient response of carbon foam with a phase-change material by measuring the response to a step temperature input to test samples. The transient response was recorded until steady state was reached. An analytic response was created and compared against the measured response. A simplified analytic prediction …

Go to article

Experimentation And Analysis Of Composite Scarf Joint, Benjamin M. Cook Mar 2005

Experimentation And Analysis Of Composite Scarf Joint, Benjamin M. Cook

Theses and Dissertations

Composite bonded scarf repairs were examined by experimentally measuring and analytically predicting the residual curing strains and strains due to mechanical loading. To accomplish this a three prong approach was used: a full strain field through a repaired laminate's thickness was measured for both a loaded specimen and a specimen with the residual strain released, models were developed for comparison to both states, and data was collected for large tensile test specimens at various stages of being scarf repaired. A ~14:1 straight scarfed one-inch wide specimen was used to collect Moire interferometry data to calculate a full strain field due …

Go to article

Detection Of Residual Stress In Sic Mems Using Μ-Raman Spectroscopy, John C. Zingarelli Mar 2005

Detection Of Residual Stress In Sic Mems Using Μ-Raman Spectroscopy, John C. Zingarelli

Theses and Dissertations

Micro-Raman (µ-Raman) spectroscopy is used to measure residual stress in two silicon carbide (SiC) poly-types: single-crystal, hexagonally symmetric 6H-SiC, and polycrystalline, cubic 3C-SiC thin films deposited on Si substrates. Both are used in micro-electrical-mechanical systems (MEMS) devices. By employing an incorporated piezoelectric stage with submicron positioning capabilities along with the Raman spectral acquisition, spatial scans are performed to reveal areas in the 6H-SiC MEMS structures that contain residual stress. Shifts in the transverse optical (TO) Stokes peaks of up to 2 cm-1 are correlated to the material strain induced by the MEMS fabrication process through the development of phonon …

Go to article

Anodic Polarization Behaviors Of Carbon Steel In Bicarbonate Solution, Jing-Mao Zhao, Yu Zuo Feb 2005

Anodic Polarization Behaviors Of Carbon Steel In Bicarbonate Solution, Jing-Mao Zhao, Yu Zuo

Journal of Electrochemistry

The anodic polarization curves of mild steel were measured in sodium bicarbonate solution of various concentrations, and the surface products were analyzed by XPS. Two anodic current peaks and two passive zones are observed in all the curves. When HCO3- ions concentration is below 0.1mol/L, the two peaks are so close that the first passive zone is difficult to be observed. When HCO3- ions concentration is above 0.1 mol/L, the first peak appears clear, while the second becomes smaller. The XPS results indicate that the out layer of film formed at a higher potential is mainly …

Go to article

Preparation And Characterization Of Lini0.85Co0.10(Timg)0.025O2 As Cathode Materials For Lithium-Ion Batteries, Xian-Jun Zhu, Hong-Hao Chen, Hui Zhan, Dai-Ling Yang, Yun-Hong Zhou Feb 2005

Preparation And Characterization Of Lini0.85Co0.10(Timg)0.025O2 As Cathode Materials For Lithium-Ion Batteries, Xian-Jun Zhu, Hong-Hao Chen, Hui Zhan, Dai-Ling Yang, Yun-Hong Zhou

Journal of Electrochemistry

Cathode material of LiNi0.85Co0.10(TiMg)0.025O2 were prepared by solid state reaction at 725℃ for 24 h from LiOH·H2O, Ni2O3, Co2O3, TiO2 and Mg(OH)2 under flowing oxygen, and were characterized by TG-DTA, XRD, SEM and electrochemical tests. Effort to simultaneously doped LiNiO2 with Co-Ti-Mg has been tried to improve the cathode performance. The results show that co-doping definitely has a large beneficial effect in increasing the capacity (182.7mAh/g of the first discharge capacity for  LiNi0.85Co0.10(TiMg)0.025O2 …

Go to article

Corrosion Resistance For Tio2 Thin Films Coated 316l Stainless Steel In The Nacl Solution, Guang-Xia Shen, Yi-Cong Chen, Chang-Jian Lin Feb 2005

Corrosion Resistance For Tio2 Thin Films Coated 316l Stainless Steel In The Nacl Solution, Guang-Xia Shen, Yi-Cong Chen, Chang-Jian Lin

Journal of Electrochemistry

The nano-TiO2 thin films have been deposited on the 316L stainless steel by sol-gel and the dip-coating methods. Hydrothermal post-treatment leads to crack-free coatings. Meanwhile, the surface structure and properties are optimized. Surface morphology, structure and properties are characterized by XRD, and SEM technologies. The results have shown that the surface of coatings is porous, uniform and orderly, the particle diameters are in the range of 15~18 nm and the pores are about 4~8 nm and TiO2 is anatase. The results of electrochemical measurements show that in the NaCl solution with pH ≥ 2 and concentration below 1mol/L, …

Go to article

Corrosion Behavior Of Mg2-XLaXNi And Mg2-XCeXNi Hydrogen Storage Alloy, Hai-Chang Zhang, Hua-Bin Yang, Jun-Hong Wang, Zuo-Xiang Zhou Feb 2005

Corrosion Behavior Of Mg2-XLaXNi And Mg2-XCeXNi Hydrogen Storage Alloy, Hai-Chang Zhang, Hua-Bin Yang, Jun-Hong Wang, Zuo-Xiang Zhou

Journal of Electrochemistry

The corrosion behavior of Mg-base hydrogen storage alloys has been investigated by potentiodynamic polarization and EIS. The results showed that the corrosion current density (icorr) and the electrochemical polarized resistance of Mg2-xCexNi alloys decreased with x increase, while icorr of Mg2-xLaxNi alloys increased and the electrochemical polarized resistance of Mg2-xLaxNi alloys increased first, then decreased with x increase. SEM results showed that the surface of Mg1.85Ce0.15Ni alloy was relatively even while the surface of Mg2-xLaxNi alloy had …

Go to article

A Study Of Metal Borides As High Capacity Anode Materials For Aqueous Primary Batteries, Ya-Dong Wang, Xin-Ping Ai, Han-Xi Yang Feb 2005

A Study Of Metal Borides As High Capacity Anode Materials For Aqueous Primary Batteries, Ya-Dong Wang, Xin-Ping Ai, Han-Xi Yang

Journal of Electrochemistry

The transition metal borides VB2 and TiB2 were tested as high capacity anode materials and their electrochemical behaviors were studied by cyclic voltammetry and discharge measurements. The experimental results indicated that transition metal borides VB2 and TiB2 electrodes can deliver exceptionally high discharge capacity of over 3100 mAh/g and 1 600 mAh/g respectively, corresponding to 11- and 6-electron oxidation reaction, although their parent elements V, Ti and boron, are almost completely electrochemically inert. The different electrochemical activitis were probably due to the electrochemical activation of boron, which clamp the potential to passivation for Ti and activity …

Go to article

Electrochemical Performance Of Gel Polymer Electrolyte Prepared By Thermal Initiating Polymerization Of Acrylates, Jin-Dan Piao, Li-Xia Yuan, Xin-Ping Ai, Han-Xi Yang, Yu-Liang Cao Feb 2005

Electrochemical Performance Of Gel Polymer Electrolyte Prepared By Thermal Initiating Polymerization Of Acrylates, Jin-Dan Piao, Li-Xia Yuan, Xin-Ping Ai, Han-Xi Yang, Yu-Liang Cao

Journal of Electrochemistry

A gel polymer electrolyte was prepared by thermal initiating polymerization of the acrylates in the EC/EMC/DMC electrolyte solution at 100℃. The LiCoO2/MCMB polymer cells were assembled and their electrochemical properties were evaluated at various charge-discharge rate and temperatures. The ionic conductivity of the polymer electrolyte containing 85wt.% liquid electrolyte is around 3.2×10-3 S·cm-1  at 20℃ and 5.6×10-4 S·cm-1 at -30℃ respectively. The gel polymer electrolyte has good electrochemical stability up to 4.5V versus Li/Li+.The first charge-discharge efficiency of the polymer cell at 0.2C rate is almost 92.1%. The discharge capacity of the …

Go to article

Application Of Carbon Paste Electrode On The Electrogenerative-Leaching Process Of Sulfide Minerals, Shao-Fen Wang, Zheng Fang, Yun-Yan Wang Feb 2005

Application Of Carbon Paste Electrode On The Electrogenerative-Leaching Process Of Sulfide Minerals, Shao-Fen Wang, Zheng Fang, Yun-Yan Wang

Journal of Electrochemistry

The cyclic voltammetry curves of sulfide mineral electrodes or corresponding carbon paste electrodes in NaCl electrolytes have been obtained in this study. The experimental results indicate that acetylene black (revealed) the electro-catalytic propertyin the electrogenerative-leaching process of sulfide minerals. The output currentand potential of carbon paste electrodes were increased to some degrees while the activation energies were lower.

Go to article

Preparation Of Poly (Bromophenol Blue) Modified Glassy Carbon Electrode And Its Electrocatalytic Activity, Wei Chen, Hong-Bin Luo, Xin-Hua Lin Feb 2005

Preparation Of Poly (Bromophenol Blue) Modified Glassy Carbon Electrode And Its Electrocatalytic Activity, Wei Chen, Hong-Bin Luo, Xin-Hua Lin

Journal of Electrochemistry

A film of poly (bromophenol blue) was formed on a glassy carbon electrode by using cyclic voltammetry. A stable film could be obtained with a potential range from -1.0 V to +1.8 V (vs.Ag/AgCl). The experimental results showed that the poly (bromophenol blue) modified glassy carbon electrode could catalyse the oxidation of ascorbic acid. It decreased the oxidation potential by about 270mV but increased the peak current. Meanwhile, this electrode showed a good linear current response for the ascorbic acid range from 2.5 to 250 (g/mL).

Go to article

Electrochemical Properties Of Polymeric Gel Electrolyte With Gbl/Ec As Plasticizers, Yu-Wen Liu, Yong Zhang, Xiao-Long Li, Qi-Ping Gu, Cui-Fen Zhang, Yu-Dong Huang Feb 2005

Electrochemical Properties Of Polymeric Gel Electrolyte With Gbl/Ec As Plasticizers, Yu-Wen Liu, Yong Zhang, Xiao-Long Li, Qi-Ping Gu, Cui-Fen Zhang, Yu-Dong Huang

Journal of Electrochemistry

Polymeric gel electrolytes (GPE) based on PMMA and PVDF-HFP were prepared using the binary mixtures of γ-butyrolactone (GBL) and ethylene carbonate (EC) as plasticizers. The ionic transport properties and electrochemical stability were studied. The room temperature conductivity reached 1.2 mS·cm-1, electrochemical stability window exceeded 4.5V. The interfacial stability between GPE and lithium electrode was also investigated. The lithium metal polymer battery (LMPB) prepared with the GPE showed better charge and discharge life cycle when the the lithium metal electrode was treated with 1,4-dioxane.

Go to article

Research On Phenol Wastewater Treatment By Electrochemical Oxidation, Tian-Cheng Li, Shen-Lin Zhu Feb 2005

Research On Phenol Wastewater Treatment By Electrochemical Oxidation, Tian-Cheng Li, Shen-Lin Zhu

Journal of Electrochemistry

Electrochemical oxidation is an effective technology for the phenol wastewater treatment, and the anode properties are important to the electrochemical oxidationefficiency. The over-potentials of oxygen evolution have been measured for thestainless steel, feasible graphite and SnO2/Ti anode respectively. Moreover, the synthetic phenol wastewater was treated by the electrochemical oxidation with the stainless steel or feasible graphite anodes. The experimental results showed that the order of the over-potential is SnO2/Ti > graphite > stainless steel; meanwhile, the COD values of purified water were approaching to or less than 100 mg·L-1, and the phenol concentrations in the purified …

Go to article

Calcium Zincate Prepared By Ball Mill Method, Sheng-Xian Li, Shuan-Bao Tian, Shao-Shan Zhu Feb 2005

Calcium Zincate Prepared By Ball Mill Method, Sheng-Xian Li, Shuan-Bao Tian, Shao-Shan Zhu

Journal of Electrochemistry

Calcium zincate was prepared by ball milling method and the factors that influence its synthesis were investigated. The composition of the compound was Ca(OH)2·2Zn(OH)2·2H2O, which was verified by XRD and TG-DTA methods. The results of powder microelectrode and in simulated batteries showed that the material had excellent cyclic performance.

Go to article

Influence Of Rare Earth Oxide On The Performance Of Secondary Zinc Electrodes, Xian-Ling Meng, Hua-Bin Yang, Jun-Hong Wang, Zuo-Xiang Zhou Feb 2005

Influence Of Rare Earth Oxide On The Performance Of Secondary Zinc Electrodes, Xian-Ling Meng, Hua-Bin Yang, Jun-Hong Wang, Zuo-Xiang Zhou

Journal of Electrochemistry

Influence of La(OH)3 or Ce(OH)3 in secondary zinc electrode was investigated by the cyclic voltammetry, potentiodynamic polarizationand potentiostatic polarization tests and influence of La2O3 or CeO2 in the charge/discharge performance of Zn/Ni battery was studied by galvanostatic charge/discharge experiment. The results showed that the film of rare earth hydroxide prevented the zincate species from transferring toward solution, enhanced hydrogen overpotential and decreased thecorrosion current density (icorr), and therefore inhibited zinc corrosion. The potentiostatic polarization results at100mV overpotential showed that La(OH)3 or Ce(OH)3 oated on the zinc electrode effectively suppressed the …

Go to article

The Fabrication And Electrochemical Studies On Carbon Nanotube Array Electrodes, Quan-Yong Gao, Jing Zhang, Yong Yang Feb 2005

The Fabrication And Electrochemical Studies On Carbon Nanotube Array Electrodes, Quan-Yong Gao, Jing Zhang, Yong Yang

Journal of Electrochemistry

An improved technique for fabrication of carbon nanotube array electrodes has been proposed in this work. Firstly, carbon nanotubes (CNs) array electrodes were prepared by combsination of Chemical Vapor Decomposition (CVD) method and sputtering techniques in anodized aluminum oxide (AAO) membrane. The CNs/AAO was immersed into HF solution to remove the barrier layer. Controlling the immersing time, the CNs array electrodes with different length contacted with electrolyte can be prepared. The morphology of CNs array electrodes was observed by SEM. The electrochemical properties of CNs array electrodes were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Cyclic voltammetric curves of …

Go to article

Fabrication And Studies Of A Novel Ag/Agcl Reference Electrode In High Temperature Molten Chloride Salts, Pei Gao, Xian-Bo Jin, Di-Hua Wang, Xiao-Hong Hu, Zheng Chen Feb 2005

Fabrication And Studies Of A Novel Ag/Agcl Reference Electrode In High Temperature Molten Chloride Salts, Pei Gao, Xian-Bo Jin, Di-Hua Wang, Xiao-Hong Hu, Zheng Chen

Journal of Electrochemistry

A new method for the easy fabrication of a stable and long life silver/silver chloride reference electrode in molten chloride salts is described in this paper. The method is based on the fact that simply placing the silica glass in molten NaCl or its vapour in the presence of oxygen resulted in satisfactory conductivity for sodium ion and possibly calcium ion in the material.The performance of such made electrode has been investigated in a few typical chloride systems at temperatures ranging from 400 to 900℃. Due to the wholly sealed construction, the reference electrode is stable, temperature-reversible, contamination free to …

Go to article

Texture Formation In Fept Thin Films Via Thermal Stress Management, P. Rasmussen, X. Rui, Jeffrey E. Shield Feb 2005

Texture Formation In Fept Thin Films Via Thermal Stress Management, P. Rasmussen, X. Rui, Jeffrey E. Shield

Materials Research Science and Engineering Center: Faculty Publications

The transformation variant of the fcc to fct transformation in FePt thin films was tailored by controlling the stresses in the thin films, thereby allowing selection of in- or out-of-plane c-axis orientation. FePt thin films were deposited at ambient temperature on several substrates with differing coefficients of thermal expansion relative to the FePt, which generated thermal stresses during the ordering heat treatment. X-ray diffraction analysis revealed preferential out-of-plane c-axis orientation for FePt films deposited on substrates with a similar coefficients of thermal expansion, and random orientation for FePt films deposited on substrates with a very low coefficient of …

Go to article

High-Anisotropy Nanocluster Films For High-Density Perpendicular Recording, David J. Sellmyer, Minglang Yan, Yinfan Xu, Ralph Skomski Feb 2005

High-Anisotropy Nanocluster Films For High-Density Perpendicular Recording, David J. Sellmyer, Minglang Yan, Yinfan Xu, Ralph Skomski

Materials Research Science and Engineering Center: Faculty Publications

This paper reports results on the synthesis and magnetic properties of L10:X nanocomposite films, where L10 = FePt, CoPt, and X = C, Ag, etc. Two fabrication methods are discussed: nonepitaxial growth of oriented perpendicular media, and monodispersed nanoparticle-assembled films grown with a gas-aggregation source. The magnetic properties are controllable through variations in the nanocluster properties and nanostructure. The films show promise for development as recording media at extremely high areal densities.

Go to article

Ferrocement Sandwich And Hollow Core Panels For Floor And Wall Construction, Hassan Mohammed Gaafar Feb 2005

Ferrocement Sandwich And Hollow Core Panels For Floor And Wall Construction, Hassan Mohammed Gaafar

Archived Theses and Dissertations

No abstract provided.

Go to article

Improved Compressed Earth Blocks, Tarek Mahmoud Ahmed Elgindy Feb 2005

Improved Compressed Earth Blocks, Tarek Mahmoud Ahmed Elgindy

Archived Theses and Dissertations

Bricks and blocks, being two of the most important building materials in our construction field, can be made out of different materials, most popular of which are earthen materials. Ancient civilizations used earthen materials as a cheap and easy way to make bricks from which they built their houses and shelters. Ancient Egyptians used "mud" (which is technically silt and clay) to make bricks which we call now adobe. These days, despite the low cost of adobe it is loosing grounds in the construction of housing because of its very low compressive strength and poor durability against weathering. Accordingly, cement …

Go to article

First Prev Next Last