Engineering Commons^™

Surface-Enhanced Raman Spectra Of Cytosine Adsorbed On A Roughened Gold Electrode, Yuan-Fei Wu, Jian-Feng Li, De-Yin Wu, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

Cytosine adsorbed on a roughened gold electrode has been investigated by using electrochemical cyclic voltammetry and surface-enhanced Raman spectroscopy (SERS). The results indicate that cytosine was adsorbed on the Au electrode in a perpendicular orientation via the N3 position. As the maximum enhancement of ring breathing mode appears at negative potentials compared with other modes, both the electromagnetic enhancement and the charge transfer mechanism were considered to contribute to the SERS intensity. The binding interaction between cytosine and the gold electrode was weakened when the potential was negatively moved. The result also indicates that the SERS technique can be used …

Electrocatalytic Oxidation And Degration Of Active Red X-3b By Nanotubes Catalytic Electrodes, Yi Wen, Jian-Hui Fang, Wei-Min Cao, Li-Yi Shi

Journal of Electrochemistry

The catalytic splitting decomposition of carbon nanotubes isprocessed by dispersing with dilute nitric acid and thermal oxidation. Then well-proportionedphenolic resin is mixed in the carbon nanotubes. Then, the carbon nanotubesare made into electrodes by hot-press molding after the process of milling with high speed. The surface of the carbon nanotubes electrodes is analyzed by SEM. Active red X-3B simulated waster water is disposed by carbon nanotubes catalyticelectrode (anode) and stainless steel(cathode). The influencing factors of degradation by current density, concentrationof electrolyte, systemtemperature and pH are investigated. The experimental results indicated that acidiccondition is propitious tothe degradationreaction of organicdyestuff and wastewater …

Effect Of Sintering Temperatures On Synthesis Of Mgco0.4Mn1.6O4 Positive Materials In Magnesium Ion Battery, Xiu-Ling Gao, Li-Fang Jiao, Hua-Tang Yuan, Jian-Sheng Cao, Ming Zhao, Hai-Xia Li, Yong-Mei Wang

Journal of Electrochemistry

The cathode material MgCo_0.4Mn_1.6O₄ for magnesium ion battery was synthesized by sol-gel method. The TG-DTA and XRD analyses showed that the prepared samples has simple spinel structure. Effect of annealing temperature on electrochemical properties was researched. The result shows that the sample sintered at 700℃ has the best electrochemical properties.

Electrochemical Reduction Characteristics Of Nitrobenzene At The Copper Electrode, Jin-Hong Fan, Wen-Ying Xu, Ting-Yao Gao

Journal of Electrochemistry

The electrochemical reduction characteristics and transition steps of nitrobenzene aqueous solution at the copper electrode, as well as its reduction mechanism were extensively investigatedby using the techniques such as cyclic voltammetry (CV) and linear scan voltammetry (LSV). The results showed that the reduction peaks of nitrobenzene at the copper electrode were located at 0.58 V and 1.32 V or so (vs. SCE), both acidity and alkalinesolutionsfavoredthe reduction of nitrobenzene. The adsorption of compounds followed by the reduction process, which is controlled by the mass transfer step at higher nitrobenzene concentration. In addition, the higher anaerobic degree led to faster reduction …

Research Progresses In A Flow Redox Battery, Quan-Feng Dong, Hua-Min Zhang, Ming-Gang Jin, Ming-Sen Zheng, Ya-Ding Zhan, Shi-Gang Sun, Zu-Geng Lin

Journal of Electrochemistry

As a large scale electrochemical storage device, flow redox battery in which the active materials are flowing electrolytes is different from the common batteries employing solid or gas materials as an electrode. In this paper we introduced flow redox battery in brief, reviewed its development and actual state on (study). The main problem existed in the new device was discussed when viewed with its future developments.

Nafion Emulsion Method For Fuel Cell Membrane-Electrode-Assembly Preparation, Chao-Yang Xia, Lin Zhuang, Jun-Tao Lu

Journal of Electrochemistry

A Nafion emulsion method for fuel cell membrane-electrode-assembly (MEA) preparation was reported for the first time in this paper. 5 %(by mass) Nafion alcohol solution and non-polar solvent (e.g., cyclohexane) were ultrasonicallymixed to produce Nafion emulsion. The catalyst ink prepared using the thus-obtained Nafion emulsion can be directly cast onto Nafion membrane to make MEA. This method is simple in operation, and effectively preventsthe Nafion membrane swelling, hence is suitable for large-scale application. The MEA thus-prepared showed comparable catalyst efficiencywith respect to the popular transfer-method, and the preliminary performance in room-temperature H₂/O₂ fuel cell test was satisfying.

The Growth Of Aluminide-Layer During The Hot-Dipping Al-(Si) Coating Onto 430 Stainless Steels, Peng-Chicao Chen, Chaur-Jeng Wang, Yu-Chang Lin, Hsuan Ching

Journal of Electrochemistry

The 430 stainless steels have been hot dipped in the molten Al-6.5%Si melts from 680 to 800℃, respectively. The effects of the hot dipping temperature and time on the thickness of the internal alloy layer have been investigated. The activation energy of the growth kinetic of aluminized layer was also calculated. The results showed that the thickness of aluminized layer increased with increasing dipping time and temperature. Besides, the growth kinetic of aluminized layer obeys parabolic rate law. The FeAl₃ and Fe₂Al₅ were formed by the inward diffusion, and the interface of intermetallic layer will be …

The Application Of Astm C1202-93 On Evaluating The Performance Of Anti-Corrosion Of Concrete, Yuan-Chen Yuan, Tsung-Yueh Tu, Chao-Lung Hwang

Journal of Electrochemistry

The test of chloride ion penetration based on the standards of ASTM C1202-93 is applied to evaluate the anti-corrosion performance of concrete in this research. Concrete specimens were produced according to ACI 318-89 mixture proportioning design and the Desenfied Mixture Design Algorithm (DMDA) and were measured the 6-hour coulombs at the age of 91 days. Results show that w/b is not the factor influencing chloride penetration of ACI concrete, as the ion penetration of ACI specimens is all higher than 2 000 Coulombs and can even be poorer than 10 000 Coulombs. With a proper amount of pozzolanic material, the …

Cyclic Voltammetry And Surface Enhanced Raman Spectroscopy Of Dissociative Adsorption Of Ethanol On Pt-Ru Electrodes, Bin Zhang, Hai-Hui Zhou, Zu-Biao Wen, Qi-Ling Zhong, Peng Huang, Xiong-Yuan Yang, Bin Ren, Tian

Journal of Electrochemistry

The behaviors of dissociative adsorption of ethanol on roughened platinum-ruthenium electrode with high activity of SERS were studied by using cyclic voltammetry and in-situ surface enhanced Raman spectroscopy, surface enhanced Raman spectra of dissociative adsorption of ethanol on Pt electrode in acid was obtained for the first time. It is shown that the Pt-Ru could lower the over-potential of CO oxidation when compared to Pt electrode. The results show that the ethanol in acid medium can be self-dissociated at Pt-Ru electrode to produce CO, which discourage the further oxidation of ethanol, some information of Pt-C and Pt-C-Pt stretching vibration from …

Adsorption Of Polyaspartic Acid From Sulphur Acid Solution On Carbon Steel And Its Corrosion Inhibition, Rong-Jing Cui, Ning Gu, Chun-Mei Li

Journal of Electrochemistry

The role of Polyaspartic acid in the corrosion inhibition of 45# carbon steel in sulphuric acid solution has been investigated by polarization curve andelectrochemical impedance spectroscopy (EIS). The influences of the concentration and the temperature of PASP on the corrosion inhibition efficiency were determined. The results indicated that the PASP as the corrosion inhibitor mainly inhibitated the anode; within the experiment temperature, the inhibitor efficiency decreased with the raising of the temperature and PASP had a good inhibiting performance at 10℃, the corrosion inhibition efficiency of PASP for carbon steel increased with the increase of the concentration of PASP when …

A Conjugate Dissolution/Deposition Behavior In Thin Layer Electrodeposition, Sun Bin, Xian-Wu Zou, Zhun-Zhi Jin

Journal of Electrochemistry

During the electrodeposition of lead, the dendrite deposit segregates from the cathode due to the disturbance of hydrogen gas. The segregated deposit could move toward the anode spontaneously rather than keep stationary. The studies show that this novel phenomenon was caused by the conjugate electrodissolution and electrodeposition reactions taking place at two ends of the isolated segment of the deposit. The mechanism inducing this phenomenon is suggested.

Corrosion Behavior Of Sml, Erw Pipeline Steels Exposed To Seamud, Wei Hua, Xiu-Tong Wang, Rong-Jie Gao, Yan Li

Journal of Electrochemistry

The corrosion behavior of API Spec X60 pipeline steels, including electric resistance welding(ERW) and Seamless (SML) types, in sea mud gathered fromYangtse River estuaryof the East China Sea was investigatedthrough linear polarization resistance, potentio-dynamic polarizationand electrochemical impedance measurements. The result indicate the improved corrosion resistance of SML in sea mud. The oxygen diffusion in the cathode zone determines the corrosion behavior of pipeline steel in sea mud.

Modular Communication System, Stephen O. Bozzone, Bonnie Bachman, Ryan Nilsen

Economics Faculty Research & Creative Works

A modular communication system (10) can include an adaptable communication module (12) having a transceiver (13) coupled to a processor (14) and memory (20), and a first interface block (24) coupled to the processor, and a host device (30) having a power source (36), a user interface (34), and a second interface block (46). The host device can be among a plurality of host devices having different user interfaces and the processor is adaptable to control the different user interfaces when the first interface block recognizes the second interface block. The module can further include a DSP (16) and a …

Freeze-Form Extrusion Fabrication Of Ceramics, Tieshu Huang, Michael S. Mason, Greg Hilmas, Ming-Chuan Leu

Materials Science and Engineering Faculty Research & Creative Works

A novel, environmentally friendly solid freeform fabrication method called Freeze-form Extrusion Fabrication (FEF) has been developed for the fabrication of ceramic-based components. The method is based on deposition of ceramic pastes using water as the media. The ceramic solids loading can be 50 vol. % or higher and initial studies have focused on the use of aluminum oxide (Al₂O₃). The FEF system components and their interaction are examined, and the main process parameters affecting part geometry defined. 3-D shaped components have been fabricated by extrusion deposition of the ceramic paste in a layer-by-layer fashion. The feasibility …

Integral Channels In Metal Components And Fabrication Thereof, Rajiv S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

An internal channel in a metal body for use in applications where internal fluid flow within a metal body is desired, as in a heat exchanger. The internal channel is formed in the metal body by frictionally stirring with a pin plunged into the metal body, and traversing the metal body with the pin.

Piezoelectric Micropump For Drug Delivery Application, Miteshkumar Sureshchandra Joshi

Material Science and Engineering Theses - Archive

Bending type actuators providing high displacement (~1mm) with low blocking force (~0.5N) and the stack actuators providing low displacement (~1m) with high blocking force (~1kN) represent the extreme ends of the current piezoelectric actuation technology. In the intermediate range there is deficiency of the actuator designs that provide high displacement with high blocking force in low frequency range of ~2 kHz. This thesis addresses this issue and describes a metal-ceramic actuator design that exhibits high displacement with high blocking force. The structure consist of a piezoelectric bar poled along the length and metal caps were attached to the two opposite …

Piezoelectric Analysis For Hetrogeneous Medium, Solmaz Torabi

Material Science and Engineering Theses - Archive

In the recent years, several types of piezocomposites have been fabricated since they have provided material properties superior to conventional piezoelectric materials. In order to design these composites, it is essential to find the elastic and electric fields for their different parts, as well as the effective properties of the composite. In the present study, the analytical approach based on the extension of Eshelby's theory in piezoelectricity and the numerical approach based on FEM modeling and ANSYS software have been used to find these elastic and electric fields inside the piezoceramic inhomogeneity for two different piezocomposite according to their connectivity, …

Domain-Wall Magnetoresistance Of Co Nanowires, Renat F. Sabiryanov, Ashok K. Solanki, John D. Burton, Sitaram Jaswal, Evgeny Y. Tsymbal

Materials Research Science and Engineering Center: Faculty Publications

Using density functional theory implemented within a tight-binding linear muffin-tin orbital method we perform calculations of electronic, magnetic, and transport properties of ferromagnetic free-standing fcc Co wires with diameters up to 1.5 nm. We show that finite-size effects play an important role in these nanowires resulting in oscillatory behavior of electronic charge and the magnetization as a function of the wire thickness, and a nonmonotonic behavior of spin-dependent quantized conductance. We calculate the magnetoresistance (MR) of a domain wall (DW) modeled by a spin-spiral region of finite width sandwiched between two semi-infinite Co wire leads. We find that the DW …

Cathodic Electrodeposition Of Cadmium Oxide, Zinc Oxide And Mixed Cadmium Oxide-Zinc Oxide Thin Films, Ashwin Seshadri

Material Science and Engineering Theses - Archive

Cadmium oxide (CdO) and (CdO)x(ZnO)1-x mixed semiconductor films were cathodically electrodeposited for the first time on F-doped SnO2 substrates. The CdO thin films were deposited from an aqueous 0.1 M KCl medium containing dissolved Cd2+ species and O2. The (CdO)x(ZnO)1-x mixed oxide films were deposited from a bath which contained Zn2+ in addition to the CdO bath constituents. Films were potentiostatically deposited at 80 0C followed by a post-deposition thermal anneal at 450 0C. The mechanism of the electrodeposition was explored using cyclic voltammetry. These samples were then analyzed by X-ray diffraction, scanning electron microscopy, and UV-visible reflectance spectrophotometry. The …

Journal Of Materials Engineering And Performance: Editorial, C. Suryanarayana, Leon L. Shaw, Rajiv S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Modeling, Fabrication, And Optimization Of Niobium Cavities Final Phase: Final Report, Robert A. Schill Jr., Mohamed Trabia, William Culbreth

Transmutation Sciences Materials (TRP)

This final report provides the activities and accomplishments of Modeling, Fabrication, and Optimization of Niobium Cavities – Final Phase. The fluid flow experiments for the etching of the superconducting cavity walls and baffle designs of phase II of the three phases has been completed leading to a MS thesis in December of 2003. Designing the experimental setup of secondary electron emission was well underway in early summer of 2003 when funding was made available for this portion of the study. By March 2004, many of the components of the experimental study reached UNLV with some assembly accomplished. The first secondary …

47th Rocky Mountain Conference On Analytical Chemistry

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 47th annual meeting of the Rocky Mountain Conference on Analytical Chemistry, co-endorsed by the Colorado Section of the American Chemical Society and the Rocky Mountain Section of the Society for Applied Spectroscopy. Held in Denver, Colorado, July 31 - August 4, 2005.

High Temperature Heat Exchanger Project: Quarterly Progress Report April 1, 2005 Through June 30, 2005, Anthony Hechanova

Publications (NSTD)

Quarterly Collaboration Meeting. General Atomics hosted a UNLVRF HTHX Project quarterly meeting on June 5 in San Diego, California. The purpose of the meeting was to promote collaboration and communication among the UNLV Research Foundation partners. Collaborators had the opportunity to discuss their research program plan and update their progress. The next meeting will be in September in Berkeley hosted by UC Berkeley.

HTHX Computational Design (UNLV). Work on optimizing the ceramic offset strip in compact HTHX design through parametric studies was performed and completed. A simple single channel model was used to perform parametric studies on dimensions and flow …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements: Quarterly Progress Report (March – May 2005), Ajit K. Roy

Transmutation Sciences Materials (TRP)

Accomplishments:

● Analyses of defects (dislocations) in martensitic Alloy EP-823, cold-reduced to different levels, have been performed by using transmission electron microscopy. The dislocation density has been related to the degree of cold-reduction and residual stress in terms of a line-shape parameter determined by the positron annihilation spectroscopy (PAS).

● Additional PAS measurements are ongoing on tensile, welded and cold-worked specimens of Alloys EP-823 and HT-9 at the Idaho Accelerator Center of ISU. Both Subhra and Silpa are involved in these measurements.

● Silpa is performing neutron diffraction (ND) measurements at the Atomic Energy of Canada Limited (AECL), Chalk River …

Sub-Surface Corrosion Research On Rock Bolt System, Perforated Ss Sheets And Steel Sets For The Yucca Mountain Repository — Quarterly Technical Report No. 4, Dhanesh Chandra, Jaak J.K. Daemen

Publications (YM)

This report encompasses the work done for this third quarter, 2005, in accordance to cooperative agreement of University of Nevada system for the Task 019 “Subsurface Corrosion Research on Rock Bolt System, Perforated SS Sheets and Steel Sets for the Yucca Mountain Repository”, the overall objective of which is to conduct corrosion research and predict the durability of rock-bolts and other underground metallic roof supports. We have started oxidation tests using Thermogravimetric Analyzer (TGA), and Potentiodynamic tests to determine the corrosion rates of rock bolts, other support materials including bench mark materials. In this quarter, we have also performed hydrogen …

Effect Of Silicon Content On The Corrosion Resistance And Radiation-Induced Embrittlement Of Materials For Advanced Heavy Liquid Metal Nuclear Systems: Quarterly Progress Report (February – April 2005), Ajit K. Roy

Transmutation Sciences Materials (TRP)

This proposal is intended to study the effect of Si content not only on the corrosion resistance but also on the radiation-induced embrittlement of martensitic stainless steels. The susceptibility of these alloys with different Si content to stress corrosion cracking, general corrosion and localized corrosion will be evaluated in the molten LBE and aqueous environments of different pH values using state-of-the-art testing techniques. Testing in the aqueous media is intended to develop baseline data for comparison purpose. Radiation-induced embrittlement of these alloys will initially be studied by irradiating the test specimens with bremmstrahlung gamma radiation from 20-40 MeV electron beams …

Giant Electroresistance In Ferroelectric Tunnel Junctions, Mikhail Ye Zhuravlev, Renat F. Sabirianov, Sitaram Jaswal, Evgeny Y. Tsymbal

Materials Research Science and Engineering Center: Faculty Publications

The interplay between the electron transport in metal-ferroelectric-metal junctions with ultrathin ferroelectric barriers and the polarization state of a barrier is investigated. Using a model which takes into account screening of polarization charges in metallic electrodes and direct quantum tunneling across a ferroelectric barrier, we calculate the change in the tunneling conductance associated with the polarization switching. We find the conductance change of a few orders of magnitude for metallic electrodes with significantly different screening lengths. This giant electroresistance effect is the consequence of a different potential profile seen by transport electrons for the two opposite polarization orientations.

Strain Induced Half-Metal To Semiconductor Transition In Gdn, Chun-Gang Duan, Renat F. Sabirianov, Jianjun Liu, Wai-Ning Mei, Peter A. Dowben, J. R. Hardy

Materials Research Science and Engineering Center: Faculty Publications

We investigate the electronic structure and magnetic properties of GdN as a function of unit cell volume. Based on the first-principles calculations of GdN, we observe that there is a transformation in the conduction properties associated with the volume increase: first from half-metallic to semimetallic, then ultimately to semiconducting. We show that applying stress can alter the carrier concentration as well as mobility of the holes and electrons in the majority spin channel. In addition, we found that the exchange parameters depend strongly on lattice constant, thus the Curie temperature of this system can be enhanced by applying stress or …

Passport To The Materials World: Materials Engineering Outreach Activities, Katherine C. Chen, Lisa Christensen, Amanda Runciman

Materials Engineering

No abstract provided.

Method And Sealant For Weld Joints, David C. Van Aken, John A. Baumann, Richard J. Lederich, Rajesh Talwar

Materials Science and Engineering Faculty Research & Creative Works

A sealant for a weld joint and an associated weld joint and method are provided. The sealant includes aluminum and germanium and is characterized by a melting temperature that is lower than the melting temperature of the structural member that is joined. The sealant, which is disposed between faying surfaces of the structural members, can fill the spaces between the structural members to prevent the entry of chemicals, moisture, debris, and other substances, thereby reducing the likelihood of corrosion of the joint or structural members at the interface. Further, the sealant can be diffusion bonded to the faying surfaces, for …