Engineering Commons^™

The Structural Characteristics And Their Influence On Production Of Buliangou Coal Mine, Ma Liang, Guo Rui

Coal Geology & Exploration

Jungar coalfield is located at the turning point of Yimeng uplift and Jinxi flexure belt in Ordos basin. There are many kinds of mine structures in the coalfield, and the structural complexity has changed greatly before and after the exposure by mine production. Taking the fold, fault, karst collapse column, igneous rock intrusion and other geological structures exposed by geological exploration and mining as the research object, quantitative or semi-quantitative evaluation of structural development characteristics in the mine was carried out by means of mathematical statistics, and the formation mechanism, evolution background of different geological structures were analyzed. The main …

Experiment Of Mesostructure And Hydrologic Characteristics Of Weakly Cemented Soft Rocks In Western China, Zhang Jiafan, Cheng Shufan, Wang Huan, Gao Zhuang, Zhou Feiwen, Zhou Hongwen

Coal Geology & Exploration

In order to accurately grasp the hydrologic characteristics of weakly cemented soft rocks in western China, the hydraulic and mechanical properties of red sandstone collected from northern Shaanxi mining area were tested. Based on the scanning image of scanning electron microscope(SEM), the mesostructural characteristics of the rocks were analyzed, and the relationship between the mesostructure of rocks and its macroscopic hydrologic characteristics was established. The results show that red sandstone has obvious characteristics of water saturation and water absorption and expansion, and its softening coefficient is 0.64. Under the action of pressure water erosion and dry and wet cycle, the …

Exploration And Quantitative Evaluation Of Overburden Strata “Three Zones” In Deep Strip Mining, Liu Zhen, Wang Yutao, Liu Xiaoping, Wang Xiaodong

Coal Geology & Exploration

In order to study the height of overburden fractures in deep strip mining, engineering geological drilling, borehole television and coalfield well logging have been applied to detect and analyze the overburden fractures in a coal mine in Jining coalfield. The results indicate that, under the strip mining with gentle dip(6°), deep depth(538 m) and 1:2 mining-retention ratio(mining -50 m and remaining -100 m), the “three zones” develop prominently, presenting “wavy” destruction in space, and the goaf has no obvious cavity. The height of caving zone is 8.45 m which is 3.0 times of the mining height, and the fault zone …

Production Decline Law And Influencing Factors Of High-Rank Coal Cbm Wells, Jia Huimin, Hu Qiujia, Mao Jianwei,, Mao Chonghao, Liu Chunchun, Zhang Qing, Liu Changping

Coal Geology & Exploration

In order to reveal the production decline law of high-rank coal CBM wells, based on the development data of Fanzhuang block in southern Qinshui basin for more than 10 years, this paper studies the decline point, decline type and influencing factors of high-rank coal CBM wells by means of numerical simulation and statistical analysis. The results show that the decline point of the Fanzhuang block is 25% and the average decline point of the single well is 21%. Most wells begin to decline after drainage of 4 years. The decline point of CBM well is determined by matrix permeability and …

Fracturing Parameters Analysis And Productivity Evaluation Of Vertical Coalbed Methane Wells With Nitrogen Foam, Li Hengle, Cao Yunxing, Zhou Dan, Chai Xuezhou, Liu Tongji, Feng Peiwen, Shi Bin, Tian Lin

Coal Geology & Exploration

Fracturing parameters are important parameters that affect the fracturing effect, fracture characteristics and CBM productivity. Through an in-depth understanding of the influence of fracturing parameters on productivity, it is essential to optimize the fracturing process and increase the productivity of CBM wells. Taking 45 nitrogen foam fracturing wells in Lu’an mining area as the research object, the types of fracturing operation curves and their effects on productivity were studied. The relationship between fracturing fluid dosage and productivity was discussed. The differences in productivity of nitrogen foam wells and hydraulic fracturing wells was compared and analyzed. The results show that: Nitrogen …

Hydrogeochemical Evolution Of No.15 Coal Seam And Limestone K2 In Southern Qinshui Basin, Li Zhongcheng, Wu Jianguang, Wang Jianzhong, Wu Xiang, Lu Guojun

Coal Geology & Exploration

Based on the water test data of No.15 coal roof K₂ limestone and No.15 coalbed methane well in the southern Qinshui basin, the characteristics, types and the genetic mechanism of water chemical composition were systematically studied by statistical and comparative methods. The evolution model was built to systematically describe the various reactions and effects of limestone and coalbed water in the recharge zone, runoff zone and detention zone. The results show that the K₂ limestone water and the No.15 coal seam water will undergo ion exchange, mixing and CO₂ action. The K₂ limestone water is mainly …

Effect Of Acidification On The Microstructure And Physical Properties Of Shale, Chen Liuyu, Li Xijian, Shen Zhonghui, Xu Shiqing, Ma Shengxiang, Yin Xin

Coal Geology & Exploration

As the main shale gas reservoir in Guizhou, it is proved that Longmaxi Formation has good shale gas accumulation conditions and resource development potential. In order to reveal the response law of acidification on the micropore structure and physical properties of Longmaxi Formation shale in Guizhou, the difference in physical properties of shale microstructures before and after acidification, such as pore volume, porosity, specific surface area and pore size distribution was quantitatively characterized by X-ray diffraction(XRD) analysis, mercury intrusion measurement, low-temperature nitrogen adsorption and nuclear magnetic resonance(NMR) experiment. The structural characteristics of the shale pores before and after acidification were …

Common Midpoint Gather Constraint-Based Impedance Inversion Of Ground Penetrating Radar, Dai Qianwei, Ning Xiaobin, Zhang Bin

Coal Geology & Exploration

GPR impedance inversion is an effective method to obtain accurately the intrinsic parameters of the subsurface medium. This method relies on low frequency information provided by logging data, but it is rarely accompanied by drilling in practical applications. To solve the problem, the common midpoint velocity analysis is employed to provide more low frequency component information for impedance inversion of GPR to finely reconstruct the dielectric parameter of subsurface in the framework of velocity-constrained inversion technique. Firstly, a layer model is specifically set up as an example to verify the feasibility of the developed velocity- constrained inversion to regulate the …

Effects Of Temperature And Antioxidants On The Oxidation Of Biodiesel Derived From Waste Vegetable Oil, Randy L. Maglinao, Torrey J. Wagner, Keegan Duff

Faculty Publications

Biodiesel offers several environmental benefits and improvements to some fuel performance properties, but its poor oxidative stability has been a major concern. Currently, the accepted practice to improve biodiesel oxidative stability is the addition of antioxidants; numerous antioxidants have been studied but their effectiveness in inhibiting biodiesel oxidation is difficult to predict due to variation with resonance stability, solubility, reactivity, and volatility. To improve prediction efforts, this study explored the Rapid Small-Scale Oxidation Test (RSSOT) as a means to investigate how biodiesel oxidation is affected by antioxidant concentration and temperature, and compared its results with the oxidative stability index test. …

Design Aspects, Energy Consumption Evaluation, And Offset For Drinking Water Treatment Operation, Saria Bukhary, Jacimaria Batista, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

Drinking water treatment, wastewater treatment, and water distribution are energy-intensive processes. The goal of this study was to design the unit processes of an existing drinking water treatment plant (DWTP), evaluate the associated energy consumption, and then offset it using solar photovoltaics (PVs) to reduce carbon emissions. The selected DWTP, situated in the southwestern United States, utilizes coagulation, flocculation, sedimentation, filtration, and chlorination to treat 3.94 m3 of local river water per second. Based on the energy consumption determined for each unit process (validated using the plant’s data) and the plant’s available landholding, the DWTP was sized for solar PV …

Quantifying The Environmental Impacts Of Cookstove Transitions A Societal Exergy Analysis Based Model Of Energy Consumption And Forest Stocks In Honduras, Noah Ver Beek, Elvin Vindel, Matthew K. Heun, Paul E. Brockway

University Faculty Publications and Creative Works

Unsustainable consumption of biofuels contributes to deforestation and climate change, while household air pollution from burning solid biofuels in homes results in millions of premature deaths globally every year. Honduras, like many low and medium Human Development Index countries, depends on primary solid biofuels for more than 30% of its primary energy supply (as of 2013). We conducted a societal exergy analysis and developed a forest stock model for Honduras for 1971–2013 and used the results to model an energy transition from traditional wood stoves to either improved efficiency wood cookstoves or modern fuel cookstoves (using Electricity or Liquefied petroleum …

Climate Change Impacts The Subsurface Transport Of Atrazine And Estrone Originating From Agricultural Production Activities, Renys Enrique Barrios, Simin Akbariyeh, Chuyang Liu, Khalid Muzamil Gani, Margarita T. Kovalchuk, Xu Li, Yusong Li, Daniel D. Snow, Zhenghong Tang, John Gates, Shannon L. Bartelt-Hunt

Nebraska Water Center: Faculty Publications

Climate change will impact soil properties such as soil moisture, organic carbon and temperature and changes in these properties will influence the sorption, biodegradation and leaching of trace organic contaminants to groundwater. In this study, we conducted a modeling case study to evaluate atrazine and estrone transport in the subsurface under current and future climate conditions at a field site in central Nebraska. According to the modeling results, in the future, enhanced evapotranspiration and increased average air temperature may cause drier soil conditions, which consequently reduces the biodegradation of atrazine and estrone in the water phase. On the other hand, …

Remote Sensing And Three-Dimensional Photogrammetric Analysis Of Glaciofluvial Sand And Gravel Deposits For Aggregate Resource Assessment In Mchenry County, Illinois, Usa, Xiaodong Miao, Christopher J. Stohr, Paul R. Hanson, Qiansuo Wang

School of Natural Resources: Faculty Publications

Sand and gravel deposits, one of the most common natural resources, are used as aggregates mostly by the construction industry, and their extraction contributes significantly to a region's economy. Thus, it is critical to locate sand and gravel deposits, and evaluate their quantity and quality safely and quickly. However, information on aggregate resources is generally only available from conventional two-dimensional (2-D) geologic maps, and direct field measurements for quality analysis at outcrops are time consuming and are often not possible due to safety concerns, or simply because exposures are too difficult to access. In this study, we presented a methodology …

Risk Assessment In Waste Sampling Activity For A Selected Food Industry, Razali Nurul Syazreen

Student Works (2020-2029)

Waste sampling is one of the main activities during environmental audit. This activity has been estimated as a non-risky activity and lead to inadequate risk assessment in the activity. The purpose of this study is to create a safer workplace for enforcement body in general and DOE officer in specific during waste sampling activity. Main objectives are to identify the hazards, further assess the hazards and determine the control measure to reduce the hazards. Observation and on-the-job training have been conducted to three food industry located in Shah Alam to identify the hazards. Structured surveys were conducted with 293 participants …

Optimal Distribution Of Best Management Practices (Bmps) For Urban Stormwater Runoff Quantity And Quality Control, Rezaei Abdul Razaq

Student Works (2020-2029)

The vast development of urban areas throughout the world has substantially impacted the natural landscapes, leading to more imperviousness. Urbanization typically results in a larger amount of runoff volume, increase in flow frequency, duration and peak runoff, faster time of concentration as well as lower infiltration which will affect groundwater recharge. The stormwater runoff quality is also adversely affected in urban areas due to the pollutant loads in stormwater runoff. Best Management Practices (BMPs) and Low Impact Development (LID) have been widely applied to urban impervious surfaces to reduce urban stormwater runoff and improve water quality. In order to achieve …

Compound Flooding In Coastal Areas Emanating From Inland And Offshore Events, Hamed Behzad Koochaksaraii

Dissertations

The vulnerability of urban populations to natural hazards and climate change is a major theme in many reports on coastal cities with flooding ranking highly among the climate change concerns. Flooding could occur as a result of runoff for inland rainfall that accumulates at the mouth of the estuary to the sea or it could occur due to a storm surge emanating from the ocean. The techniques for modeling the flooding from these events are very different, as they were developed in different scientific fields: hydrology and hydraulic engineering for inland rainfall versus coastal oceanography and coastal engineering for offshore …

Numerical And Analytical Methods To Predict Behavior Of Reinforced Ductile Concrete Composites, Mandeep Pokhrel

Dissertations

Structural components constructed with ductile concrete composites, such as high-performance fiber-reinforced cementitious composites (HPFRCC), are known to perform exceptionally well under extreme mechanical and environmental loading conditions compared to traditional concrete. HPFRCC flexural components exhibit enhanced performance in terms of displacement ductility, energy dissipation capacity, and damage tolerance capacity. However, recent research suggests that the flexural behavior of reinforced HPFRCCs in terms of crack progression, reinforcement plasticity, and failure mechanism is significantly different than conventional reinforced concrete. Specifically, the failure mode of flexural members is found to be predominantly through the fracture of longitudinal reinforcement rather than compression crushing of …

Modeling Of Distributary Channels Formed By A Large Sediment Diversion In Broken Marshland, Dylan Blaskey

LSU New Orleans Theses and Dissertations

A 2-D DELFT3D model was developed to address the morphological response of Barataria Bay, the sediment deposition rate in the receiving basin, and the impact on the existing distributary channels within the broken marsh system due to the proposed Mid-Barataria Sediment Diversion. The model had a mesh size sufficient to accurately represent the development of the distributary channels, localized flooding, erosion, and salinity in the basin. The model predicts that the receiving basin will experience extensive erosion during the first year the diversion is open creating three major distributary pathways which flood much of the basin in freshwater. Most locations …

Determination Of The Optimal Location For Constructing Solar Photovoltaic Farms Based On Multi-Criteria Decision System And Dempster–Shafer Theory, Marzieh Mokarram, Mohammad J. Mokarram, Mohammad R. Khosravi, Ali Saber, Akbar Rahideh

Civil and Environmental Engineering and Construction Faculty Research

Considering environmental concerns regarding air pollution which is induced by burning fossil fuels to generate electrical power, utilizing solar energy as a green and sustainable energy source is of great interest. This study proposes a novel framework to determine the optimal location for constructing solar photovoltaic (PV) farms. To locate the suitable areas for PV farms, firstly, a fuzzy-based method is utilized to homogenize the input parameters, thereafter, the analytical hierarchy process (AHP) and Dempster-Shafer (DS) methods are independently used. In the AHP method, the proper weight for each input parameter is generated utilizing a pairwise comparison matrix. However, the …

Space And Depth-Resolved Naturally Occurring Toxic Groundwater Species In Bangladesh And Rwanda: Origination And Risk Analysis, Kenneth Hamilton

Civil and Environmental Engineering Theses and Dissertations

Access to safe potable water is a necessity for all. Groundwater is a commonly relied upon drinking water source for many areas around the world. This is especially true for communities in high density, rural settings. Such is the case for populations near Cox’s Bazaar, Bangladesh, and in the Bugesera region of Rwanda. Sediment and groundwater contamination, through toxic dissolved species, represents a significant public health risk to exposed populations. Tropical soils, such as the soil profiles in Bangladesh and Rwanda, often contain higher concentrations of heavy metals (Rieuwerts, 2007). Additionally, nitrate from fertilizers, are widely used on the soils …

Effect Of Post-Consumer Content And Bioplastic Incorporation On Polymeric Resin In Consumer Applications, Shelby Bicknell

Electronic Theses & Dissertations

Controversy surrounds the use of plastic products, primarily due to their potentially negative impact on the environment at the end of their lifecycle. The most widely used plastics are manufactured from petrochemicals such as petroleum, coal or natural gas. Petrochemical plastics are not able to readily breakdown in the environment, which aggravates the existing pollution problems. Fortunately, there are eco-friendly alternatives to petrochemical-based plastics. Bioplastics may be derived from renewable sources, biodegradable, or both. Bio-based plastics are plastics that may be derived from renewable biomass sources including, but not limited to, vegetable oils, cornstarch, straw, woodchips, and food waste. They …

Assessing The Potential For Greater Solar Development In West Texas, Usa, Dale D. Devitt, M. H. Young, J. P. Pierre

Life Sciences Faculty Research

As population and economies continue to grow on a global scale, so too does the demand for energy. To improve reliability and independence of energy supplies, the U.S. and many other countries are seeking internally-sourced renewable energy; solar is one such renewable-energy source that meets these criteria. However, all energy sources exert some environmental impacts. In the case of solar, direct impacts stem mostly from alteration of land needed to host infrastructure. Understanding the environmental upside and downside potential of solar energy systems allows a more comprehensive, side-by-side comparison with different energy sources. In this article, we focus on the …

College Of Engineering Senior Design Competition Spring 2020, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Zenneck Waves In Decision Agriculture: An Empirical Verification And Application In Em-Based Underground Wireless Power Transfer, Usman Raza, Abdul Salam

Faculty Publications

In this article, the results of experiments for the observation of Zenneck surface waves in sub GHz frequency range using dipole antennas are presented. Experiments are conducted over three different soils for communications distances of up to 1 m. This empirical analysis confirms the existence of Zenneck waves over the soil surface. Through the power delay profile (PDP) analysis, it has been shown that other subsurface components exhibit rapid decay as compared to the Zenneck waves. A potential application of the Zenneck waves for energy transmission in the area of decision agriculture is explored. Accordingly, a novel wireless through-the-soil power …

Tri-State Mining District, Ecological System, And Human Health: Systematic Literature Review Analysis, Jihyun Jane Min

Posters

Objective: Although extensive research exists on corrosive environments in the Tri-State Mining District (TSMD), there has been a lack of research on how such harmful effects in the TSMD could affect residents living in those areas. However, quite recently, such research regarding relationships between the health conditions of low-income residents and toxic elements in TSDM began to grow. Therefore, the increase of empirical studies means greater complexity of the findings that require a more intricate understanding.

Methods: To meet the necessity of the study, this research was conducted by an extensive systematic review of the literature on the harmful effects …

Development Of Vs Profiles And Site Periods In The Mexico City Basin, Landon Joel Woodfield

Graduate Theses and Dissertations

This study presents dynamic site characterization measurements at 25 sites within the Mexico City Basin. The primary focus of the testing was along the western edge of the Mexico City Basin. At each site, active source Multi-channel Analysis of Surface Waves (MASW) arrays and passive source Microtremor Array Measurements (MAM) L-arrays and circular arrays were used to acquire dispersion data. Horizontal to Vertical Spectral Ratio (HVSR) data was collected to determine site periods at each location. These experimental dispersion data and site periods were fit using a joint inversion of Rayleigh and Love wave dispersion data and HVSR site period …

Promoting The Sustainable Utilization Of Groundwater Resources In Ethiopia Using The Integrated Groundwater Footprint Index, Xinyu Lin

Honors Scholar Theses

The country of Ethiopia is highly vulnerable to human-caused climate change and is already suffering from the effects. The predominately rural population relies heavily on small-scale agriculture, with 78% of households having at least one member engaged in the field, yet staple crops are highly susceptible to droughts and other weather shocks. Total and agricultural GDP growth in the country have been strongly linked to inter-annual rainfall variability, of which Ethiopia has among the highest in sub-Saharan Africa. A decrease in rainfall since the 1970s has been one of the primary causes of low crop yields, and stresses the immediate …

Design Of A Shallow-Aero Ebb And Flow Hydroponics System And Associated Educational Module For Tri Cycle Farms, Julie Halveland

Biological and Agricultural Engineering Undergraduate Honors Theses

Tri Cycle Farms, whose main mission is to reduce food insecurity in their community, is a non- profit urban farm in Fayetteville, Arkansas. The “Tri” in their name refers to the three parts of their foundation: giving a third of their yield to volunteers, giving a third to local food pantries, and selling a third to sustain the farm and demonstrate the economy of local food production. They want to expand on the third part and have a vision of building a hydroponic greenhouse with the intention that it will create more crops to sell and give, as well as …

Utilization Of Recycled Filament For 3d Printing For Consumer Goods, Alexa Peterson

Apparel Merchandising and Product Development Undergraduate Honors Theses

The 3D printing market has been used in a wide variety of manufacturing industries including textile and apparel. Many consumers can now own a personal 3D printer at home for recreational printing. There are even websites dedicated to 3D printing patterns made by consumers. However, the materials used in the 3D printing process pose a problem for the environment due to their plastic-based nature. 3D printing is a layered process with each layer being printed depending on the layer below it for strength and stability. During the 3D printing process, great amounts of waste are produced as a result of …

Irrigation Design In Montana: Accommodating Varying Water Accessibility Across The Continental Divide., John Garrett Lampson

Biological and Agricultural Engineering Undergraduate Honors Theses

The design work performed in this project was conducted over two summers (2018, 2019) of internship experience with the Natural Resources Conservation Service (NRCS) across the state of Montana. The first summer’s design work was based out of Glendive, MT, in Dawson County, approximately 50 kilometers from the North Dakota border. The second summer was in Missoula, MT, in Missoula County, near the Idaho border. The two areas differ significantly in topography, weather, and water availability with the main separating geographic influence being the Rocky Mountains.

This paper focuses on the design process and requirements for two farms located outside …