Engineering Commons^™

Numerical Model Of Two-Region Flow By Constant-Head Pumping In An Unconfined Aquifer, Shi Pengyu, Zong Yijie, Teng Kaiqing, Liu Jianjun, Xiao Liang

Coal Geology & Exploration

In order to reveal the mechanism of two-region Darcian and non-Darcian flow induced by constant-head pumping tests in unconfined aquifers, a numerical model of well flow by constant-head pumping underground based on finite difference solution was proposed. In the model, it is assumed that the aquifer is divided into two regions according to the pumping flow characteristics: the finite non-Darcian flow region near the pumping well and the semi-infinite Darcian flow region far away from the pumping well. Specifically, the flow regime in the non-Darcian flow region was simulated by the Izbash’s equation, and the reliability of the proposed solution …

Status And Development Of Intelligent Drilling Tools For Coal Mine, Gao Xiaoliang

Coal Geology & Exploration

As an important part of intelligent drilling, the intelligence of drilling tool system plays a crucial role in the intelligent development of coal mine underground drilling. In order to deeply explore the development direction of intelligent drilling tools, the research results and technical characteristics of intelligent drilling tools in coal mines were systematically sorted out from the aspects of directional drilling tools, measurement while drilling (MWD) system, intelligent drilling pipes and drill bits with reference to the experience in development of oil and gas industry, and the existing shortcomings were also summarized. It is pointed out that screw motor is …

Methods For Estimating Carbon Emissions From Coals In Underground Mines: A Case Study Of The Western Fukang Mining Area, Peng Rendong, Wei Bo, Li Xin, Zhang Ji, Zhang Zizhao, Wang Bo, Zhang Na, Cui Deguang

Coal Geology & Exploration

Carbon emissions have come into sharp focus of human society. The carbon emissions from coals rank as the most predominant part of China’s total carbon emissions. Presently, there is no available study on the accurate calculation of carbon emissions from coals in typical underground mines in Xinjiang, with the CH₄ emission even overlooked. This study centers on the carbon emissions from coals in underground mines in the western Fukang mining area. As per the occurrence laws of CH₄ and CO₂ in coal seams, as well as coal mining plans, this study classified the sources of carbon emissions …

A New Physics-Informed Method For The Fracability Evaluation Of Shale Oil Reservoirs, Li Yuwei, Li Zijian, Shao Lifei, Tian Fuchun, Tang Jizhou

Coal Geology & Exploration

The accurate evaluation of reservoir fracability is an essential prerequisite for the fracturing design and post-fracturing productivity evaluation of reservoirs. Rock mechanical parameters have been applied to the fracability evaluation of shales presently, exhibiting great field application performance. Accordingly, it is crucial to obtain accurate rock mechanical parameters. This study developed a physics-informed neural network (PINN) model. Driven by data and physical information, the PINN model can accurately predict rock mechanical parameters using only a small amount of data. To verify its performance, the PINN model was compared with the artificial neural network, random forest, and XGBoost models. The comparison …

Water Inrush Mechanism Of Coal Mine Shaft Fracture Under Fluid-Solid Coupling, Xue Weipei, Shen Lei, Yao Zhishu, Cheng Hua, Rong Chuanxin

Coal Geology & Exploration

The occurrence of coal mine shaft fractures and water inrush accidents is alarmingly frequent, endangering the lives of underground personnel and compromising mine safety. To comprehend the influence of confined groundwater in the process of shaft fracture and the formation mechanism of water inrush channels, a model test was devised using similarity theory and coupled fluid-solid numerical simulation technology. The findings reveal that direct contact between the shaft lining and pressurized water hinders the development of load-bearing and deformation capacities. This is specifically evidenced by the premature appearance of the yield point, a reduction in peak strength and strain, and …

Zoned Prediction Of Water Inflow After Dewatering Of Working Face Based On Waterrichness Zoning Of Aquifer, Yang Lei, Lei Fangchao, Hou Enke, Lu Bo, Feng Dong, Zhao Kaixing

Coal Geology & Exploration

As the weathered bedrock and burned rock aquifers seriously threaten the production safety of mines in the Jurassic coalfield of northern Shaanxi Province, accurate prediction of their waterrichness and water inflow at the working face is of great significance for water control in mines. Aiming at the weathered bedrock and burned rock aquifers with close hydraulic connection, the area where working face 15217 of Shaanxi Hongliulin Coal Mine is located was taken as the study area. Meanwhile, the aquifer thickness, lithological combination index, index of rock burning and weathering degree and core recovery was taken as the evaluation indexes. The …

Study On Mesoscopic Failure Characteristics Of Layered Red Shale, Ma Zhenqian, Zhou Lang, Zuo Yujun, Zhang Jimin, Zou Yihuai, Cao Yunqin

Coal Geology & Exploration

To study the mesoscopic failure characteristics of the layered red shale, uniaxial mechanical experiments were carried out by applying DSTD-1000 electro-hydraulic servo rigid pressure on the red shale with different bedding angles. Meanwhile, SEM and XRD experiments were implemented on debris to obtain its mechanical parameters, failure characteristics, microstructure, and relative content of components. Based on this, models of the red shale with different bedding angles were constructed using the discrete element PFC^3D for the uniaxial compression experiments to study the mesoscopic failure characteristics of red shale. The results show that: (1) When the bedding angle θ=30°, 45°, …

An Attention Mechanism-Based Cnn-Bilstm Real-Time Transient Electromagnetic Method, Gu Yao, Xie Haijun, Zhou Zipeng, Li Lu

Coal Geology & Exploration

The one-dimensional transient electromagnetic (TEM) method is time-consuming and suffers other drawbacks such as difficult parameter adjustment and heavy dependence on the initial model. Therefore, this study proposed a real-time TEM inversion method—the Attention mechanism-based convolutional neural network (CNN) - bidirectional Long Short-Term Memory (BiLSTM) (AC-BiLSTM). By fully utilizing the time difference, the AC-BiLSTM performed model training in non-observation time and the real-time inversion of the collected data in observation time. With the measured data mixed with a certain proportion of data obtained from forward modeling as the dataset, the sampling time and apparent resistivity as the input features in …

Numerical Simulations And Wavefield Analysis Of In-Seam Wave Advance Detection In Viscoelastic Media, He Dixiu, Ji Guangzhong, Jiao Wenjie, Zhang Yawei, Yu Kun

Coal Geology & Exploration

In-seam waves are commonly applied to the advance detection of hidden faults in front of mining faces. However, coal seams, which have viscoelasticity actually, imposing absorptive and attenuation effects on in-seam waves. To investigate the wave field characteristics and propagation patterns of in-seam waves in viscoelastic coal seam media, this study built a three-dimensional geological model of coal measures with faults based on Kelvin-Voigt’s first-order velocity-stress equation. Using this equation, three-dimensional finite-difference numerical simulation was carried out. The results indicate that (1) for reflected in-seam waves in viscoelastic media, which exhibit high energy attenuation, their propagation and attenuation characteristics are …

Manipulator Trajectory Planning Method Of Anchor Drilling Robot, Lei Mengyu, Zhang Xuhui, Yang Wenjuan, Dong Zheng, Wan Jicheng, Zhang Chao, Du Yuyang

Coal Geology & Exploration

In order to improve the support efficiency of coal mine roadway and the automation intelligence of heading face, an anchor drilling robot integrating the cantilever roadheader and the six-degree-of-freedom manipulator was designed, and studied on the anchor drilling sequence planning strategy and the drilling boom trajectory planning method. Firstly, the kinematics model of the manipulator structure was established based on the improved DH method. On this basis, the forward and inverse kinematics solutions were analyzed, and the spatial position and the corresponding joint variable values of the drilling rig were calculated. Secondly, the manipulator space was analyzed based on Monte …

Characterization Of Environmental Levels Of Pesticide Residues In Household Air And Dust Samples Near A Bioenergy Plant Using Treated Seed As Feedstock, Jabeen Taiba, Eleanor G. Rogan, Daniel D. Snow, Chandran Achutan, Muhammad Zahid

Nebraska Water Center: Faculty Publications

Exposure to neonicotinoid insecticides is associated with adverse human health outcomes. There is environmental contamination in Saunders County, Nebraska, due to the accumulation of fungicides and insecticides from a now-closed ethanol plant using seed corn as stock. A pilot study quantified environmental contamination in nearby houses from residual pesticides by measuring dust and air (indoor/outdoor) concentrations of neonicotinoids and fungicides at the study site (households within two miles of the plant) and control towns (20–30 miles away). Air (SASS^® 2300 Wetted-Wall Air Sampler) and surface dust (GHOST wipes with 4 × 4-inch template) samples were collected from eleven study …

Does Drought Stress Eliminate The Benefit Of Elevated Co2,/Sub> On Soybean Yield? Using An Improved Model To Link Crop And Soil Water Relations, Wenguang Sun, David Fleisher, Dennis Timlin, Chittaranjan Ray, Zhuangji Wang, Sahila Beegum, Vangimalla Reddy

Daugherty Water for Food Global Institute: Faculty Publications

Crop simulation models are indispensable tools that facilitate studies to assess climate impacts and adaptation responses, but have not been adequately tested in terms of accurately predicting crop growth and water stress responses to high carbon dioxide concentrations [CO₂]. The soybean model, GLYCIM, previously modified with a coupled leaf-level gas exchange – energy balance model, was integrated with a two-dimensional convectivediffusive root growth module which linked soil and leaf water potentials with the regulation of stomatal conductance. We evaluated the accuracy of this modified GLYCIM using experimental data from a Free-Air CO₂ Enrichment (FACE) site, SoyFACE, and …

Effect Of Priming And Explosive Initiation Location On Pull In Hard Rock Underground Mine, K.K. Rao, B.S. Choudhary

Journal of Sustainable Mining

In the development of hard rock mines, achieving maximum pull after blasting plays a crucial role. Various machines have been developed for rock cutting, but still, due to flexibility and cost-effectiveness, drilling and blasting are preferred. To enhance the effectiveness of this method, several techniques have been developed, including the use of appropriate stemming material, double-primer placement, selecting optimal initiation locations, improving blast designs, and exploring stress superposition techniques through electronic detonators. This research paper focuses on investigating the effect of the priming and explosive initiation location on pull through an experimental approach. The study specifically examines the influence of …

Leaching Performance Of Nanotechnology-Induced High-Arsenic-Bearing Tooeleite-Like Mineral Nanowaste, Arindam Malakar, Sanjit Das, Samirul Islam, Rajneesh Singh, Sugata Ray

Nebraska Water Center: Faculty Publications

For arsenic decontamination from groundwater, arsenic crystallization is becoming adopted due to its sustainability and economic benefits. However, arsenic crystallization technology is a two-step process, which makes it complex and generates hazardous waste. Successful efforts toward making it a single-step process are presented here. The addition of nanorods and ball-milled zinc sulfide nanoparticles to arsenic-contaminated water result in highly monodispersed and higharsenic- containing mineralized nanowaste with a crystalline structure similar to the mineral Tooeleite ((Fe³⁺₆(As³⁺O₃)₄SO₄(OH)₄•4H₂O)). This study reports the results of a short-term stability test …

Reducing Uncertainty In Sea-Level Rise Prediction: A Spatial-Variability-Aware Approach, Subhankar Ghosh, Shuai An, Arun Sharma, Jayant Gupta, Shashi Shekhar, Aneesh Subramanian

I-GUIDE Forum

Given multi-model ensemble climate projections, the goal is to accurately and reliably predict future sea-level rise while lowering the uncertainty. This problem is important because sea-level rise affects millions of people in coastal communities and beyond due to climate change's impacts on polar ice sheets and the ocean. This problem is challenging due to spatial variability and unknowns such as possible tipping points (e.g., collapse of Greenland or West Antarctic ice-shelf), climate feedback loops (e.g., clouds, permafrost thawing), future policy decisions, and human actions. Most existing climate modeling approaches use the same set of weights globally, during either regression or …

Lithium Extraction From Aqueous Solution Using Magnesium Doped Lithium Ion-Sieve Composite, Ujjwal Pokharel

Civil & Environmental Engineering Theses & Dissertations

This study focused on the development of a magnesium doped ion-sieve composite to extract lithium from an aqueous solution using adsorption process. The extraction process will provide a sustainable alternative to the currently practiced solar evaporation/concentration method which is very slow (takes 24 months) and water intensive. Currently, most of the lithium in the world comes from the mining of lithium or from the evaporative extraction process from the brine. Additionally, the Salton Sea area geothermal brines are recognized as potentially important domestic sources of lithium. Lithium concentration in geothermal brines from the Salton Sea area is reported to be …

Alca: Comparing Icelandic Aluminum Emissions To The World Through Statistical Reasoning And Programming-Based Predictive Tools, Markus Sujansky

Iceland: Climate Change and The Arctic

Aluminum production is a process that is heavily reliant on large amounts of available

energy, and therefore lends itself to locations where energy production is abundant. Iceland, as a global leader in Geothermal and Hydropower energy, has experienced an industrial boom in the past 20-30 years, quickly becoming a top 10 worldwide aluminum producer. However, although the three main companies that operate their smelting processes in the country are powered by clean energy, they still import raw materials from all over the world, with source locations ranging from Brazil to Australia. In order to find out if the long distance …

Open-Cast Mining Deformations Monitoring Using Sentinel-1 Sar Data (Sbas Technique), Mahvash Naddaf Sangani, Seyed Reza Hosseinzadeh, José Francisco Martín Duque, Mahnaz Jahadi Toroghi, Kapil Kumar Malik

Journal of Sustainable Mining

Land surface deformation created by mining activities can have negative impacts on the environment. Measuring them can be a tool for managing the environmental impacts of mining. Synthetic Aperture Radar Interferometry is a remote sensing method for measuring deformations. The main aim of this research is to investigate the deformation phenomenon on a region scale and extend our understanding of it to all mining deformation areas across the country. This paper used Small Baseline Subset Interferometric Synthetic Aperture Radar technology to obtain deformations information in the Sangan mine based on mining activities. We used 48 scenes of Single Look Complex(SLC) …

Numerical Modelling Of Uniaxial Compressive Strength Laboratory Tests, Phu Minh Vuong Nguyen, Andrzej Walentek, Petr Waclawik, Kamil Soucek, Michał Antoniuk

Journal of Sustainable Mining

In the last decades, numerical modelling has been widely used to simulate rock mass behaviour in geo-engineering issues. The only disadvantage of numerical modelling is the reliability of required input data (e.g. mechanical parameters), which is not always fully provided due to the complexity of rock mass, project budget, available test methods or human errors. On the other hand, it was proven in many cases that numerical modelling is a helpful tool for solving such complex problems, especially when coupled with the results of laboratory and in-situ tests. This paper presents an attempt to determine the proper numerical constitutive model …

Enhancing Service Restoration In Tanzanian Power Grid Using Internet Of Things Sensors And Renewable Energy Sources, Rukia J. Mwifunyi, Daudi C. Mnyanghwalo, Shamte J. Kawambwa

Tanzania Journal of Science

The increased dependence on the electric power grid, coupled with the increasing number of new customers, motivates the need to improve the reliability and resilience of the electric distribution systems. Modern distribution systems are becoming more resilient against power outages due to the increasing integration of Distributed Energy Resources (DERs) and the availability of efficient mechanisms for load shedding. Several studies considered fault detection and Service Restoration (SR) as separate problems without considering the implementation feasibility of integrating both solutions. To ensure the resiliency in the power system, it is important to have proper mechanisms which integrate sensing, detection, and …

Modeling Leaf-Level Transpiration: Exploring The Consequences Of Assumed Saturated Vapor Pressure In Leaves, Danlyn L. Brennan

Dissertations and Theses

Understanding the dynamics of water transport through leaf intercellular airspaces (IAS) and its impact on transpiration is crucial for accurate predictions of plant water use and ecosystem response to changing climates. This study investigates the implications of assuming undersaturation of water vapor in the IAS for transpiration predictions and explores potential modifications to standard modeling approaches.

A dynamic 1D soil-plant-atmosphere continuum using a stomatal optimization model (SPAC-SOT) framework was used to simulate the response of tree species, P. edulis, to prolonged drought and varying environmental conditions. Comparisons between two model assumptions (saturated vs. undersaturated IAS) reveal notable differences in …

Multi-Criteria Analysis Of The Possibility Of Retrofitting The System Of Rainwater Drainage From Subsidence Basins In A Liquidated Mine, Andrzej Chmiela, Małgorzata Wysocka, Adam Smoliński

Journal of Sustainable Mining

Mine closure is the natural final stage of mining activity. The process of financing mine liquidation is complex and expensive. The many years of conducted hard coal extraction affect the surface height differences. Analyses of the shifts in hydrogeological conditions and water hazard states in mining plants led to legal regulation adaptations, primarily in terms of hydrogeological documentation preparation, and made it necessary to conduct work concerning new options for water hazard assessment and prevention. Current subjects of particular interest include shifts in terrain morphology and the water regime, resulting in periodic flooding and permanent flooding of the most depressed …

Research On Three-Stage Automatic Hole Packer For Gas Extraction Drilling In Underground Coal Mine, Wang Qingfeng, Shi Shuhan, Xin Dezhong, Chen Hang, Zhang Shitao

Coal Geology & Exploration

In view of the requirements of hole sealing during gas extraction drilling in underground coal mine for manual packer installation and sealing material injection, as well as the low automation level of hole sealing technology, a three-stage automatic hole packer for gas extraction drilling in underground coal mine was developed, with the appearance similar to the drill pipe. The hole packer could be mechanized into the drilling hole by an automatic drilling machine, and realize the automatic injection of sealing material. Herein, the Mooney-Rivlin hyperelastic constitutive model was used to represent the strain energy function by the finite element analysis …

Intelligent Optimization And Control Technology For Drilling Process Of Coal Mine Tunnels, Yao Ningping, Wu Min, Chen Luefeng, Lu Chengda, Fan Haipeng, Zhang Youzhen, Li Wangnian, Yao Ke

Coal Geology & Exploration

The harsh environment for drilling construction of coal mine tunnel, complex coal seam structure and complicated operation procedures can cause low drilling efficiency and high drilling cost. For this reason, it is imperative to carry out studies on the optimization and control technology for the drilling process of coal mine tunnel. Herein, study was conducted from intelligent identification of lithology of coal-bearing formation, intelligent optimization of drilling parameters and their intelligent control, focusing on the key technology for control of drilling process of coal mine tunnel. First, in order to accurately determine the type of coal-bearing formation, an intelligent identification …

Continuous And Discontinuous Numerical Simulation Of The Rock Breaking Process Of Pdc Drill Bit Under Composite Impact, Qin Chengshuai, Sun Hongbin, Li Liping, Liu Xuegang, Liu Zhihui, Feng Chun, Sun Zizheng

Coal Geology & Exploration

Composite impact drilling is a novel rock-breaking technique that combines both axial and torsional impacts. To address the issues of complex failure mechanisms and unclear rock-breaking mechanisms under the axial-torsional impacts on rock by Polycrystalline Diamond Compact (PDC) drill bits, a FEM-DEM rock model based on shared nodes was established using the Continuous Discontinuous Element Method (CDEM), and the rationality of this computational model was verified through laboratory uniaxial compression experiments. Besides, a composite impact motion model for single drill bit was built through the secondary development of JavaScript, and the composite impact rock-breaking process of single PDC drill bit …

Application Of Intelligent Direct Push Measurement While Drilling Device For Environmental Geological Surveys, Sun Pinghe, Zhou Shengwei, Cao Han, Gao Qiang, Cheng Gongbi, Zhang Hui

Coal Geology & Exploration

In order to solve the technical challenges of inaccuracy and poor credibility of contaminant survey results due to the low accuracy of drilling trajectories in environmental geological surveys, the structural and functional characteristics of the existing direct-push drilling tools were analyzed. On this basis, the method of near-bit measurement while drilling using single-action combination was proposed. An intelligent measurement-while-drilling (MWD) device was developed, a laboratory platform monitoring module was established, a set of monitoring software was developed, and the stability and reliability of the intelligent MWD device was analysed. Then, verification tests have been carried out on the laboratory platforms …

Wear Law And Design Of Assembling Diamond Bit Based On Finite Element Analysis, Yang Zhan, Tan Songcheng, Yang Kaihua, Fang Xiaohong

Coal Geology & Exploration

In addition to coring drilling, full (non-coring) drilling also occupies a large proportion in the energy exploration and development. Non-coring drilling can reduce the high time cost of lifting and lowering work required for coring, thereby increasing the net drilling time, improving the drilling efficiency and reducing the drilling costs. The traditional non-coring drill bits are prone to uneven wear on the bit surface during the drilling process. To identify and improve this law of uneven wear, it was herein proposed to use the assembling non-coring bit to improve the eccentric wear of bit. For this reason, numerical simulation analysis …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Attenuation Model And Law Of High-Frequency Drilling Fluid Pressure Wave, Zhou Botao, Su Yinao, Wang Jiajin

Coal Geology & Exploration

The technology of transmitting high-frequency drilling fluid pressure wave information with high transmission rate. It is also one of the key technologies to achieve the automated and intelligent drilling. However, the field application of this technology is hindered by the substantial attenuation experienced by high-frequency drilling fluid pressure waves during the transmission process. Thus, exploring the attenuation characteristics of these waves is crucial for the development of high-speed transmission technology. Herein, it is assumed that the drilling fluid pressure is equivalent on the same section of drill string, and the flow rate of drilling fluid is radially distributed. On this …

Magnetic Beacon-Based Horizontal Directional Drilling Guidance Technology, Zu Yutong, Wang Lu, Gong Da, Hu Yuanbiao

Coal Geology & Exploration

In order to solve the problems of existing horizontal directional drilling (HDD) guidance methods, including low measurement accuracy, shallow positioning distance, discontinuous measurement data and great interference by magnetic field, a magnetic beacon-based horizontal directional drilling guidance and positioning method was proposed to achieve the position and attitude measurement of HDD. Meanwhile, a measurement array based on the third-order magnetic gradient tensor was designed, which verifies through simulation that the method could eliminate the influence of the geomagnetic fields and achieve the position measurement. In order to improve the attitude measurement accuracy, the multisource data fusion was performed with MEMS …