Engineering Commons^™

Temperature And Time Dependent Viscosity Of An Elastomer Modified Epoxy Resin, Woodrow Williard Wagner Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

Temperature effects on the viiscosity of an epoxy resin (diglycidyl ether of bisphenol A - DGEBA), an elastomer (carboxy terminated butadiene acrylonitrile - CTBN), and two blends containing nominally 10 percent elastomer were examined from strain rates of 0.1 sec^-1 to 10,000 sec-¹ over a temperature range from 300K to 450K. All results indicated the greatest drop in viscosity occurred for each of the materials over the temperature range of 300K to 350K. In addition, the materials exhibited Newtonian responses over the entire strain rate range, Adding small amounts of elastomer to the I epoxy only moderately effected …

Low Cost Fencing, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

Fences with more wire and posts are not necessarily stronger.

Design using high tensile wire can save on materials and reduce costs.

Development Of A Quadratic Finite Element Solution Of The Convective-Transport Equation., David A. Dillard

Masters Theses

"A quadratic finite element has been developed for the solution of the general three-dimensional convective-transport equation. Inherent instabilities in the numerical solution arise when the convective terms in the governing equation become significant. An application of upwinding techniques to the 20 degree of freedom serendipity element failed to produce acceptable results. Upwinding was applied to the 27 degree of freedom Lagrangian element with good results. Results of the latter element are given for several problems, including a model of a round to round metal forming process"--Abstract p. iii

Investigations Of Inertia Effects On An Infinite Solid Cylinder Due To Thermal Shock, Roland Vanderbilt Williams

Retrospective Theses and Dissertations

In this paper the effects of inertia are explored for the case of a thermal excitation applied on the surface of an infinitely long, solid circular cylinder. The linear uncoupled field equations for a homogeneous, isotropic, thermoelastic medium are used to derive the desired field equations of stress and displacement. The solution procedure included, first, the determination of the thermal boundary value problem from the energy equation which is identically satisfied for the uncoupled condition. Secondly, substitution of the strain-displacement relationships and the previously obtained thermal relation into the equilibrium equation containing inertial effects. The equilibrium equation is the only …

Assessment Of Feasibility Of Proposed Bolted Connections For Tubular Structures, John Henry Tausch

Dissertations and Theses

The search for new and additional sources of energy -- from sun, wind, waves, and ocean currents -- is necessitating the development of structures in the open environment of the oceans as well as on land. The advantages of round or tubular members for use in such structures are shown; and to avoid the uncertainties of welded joints, two bolted connections are proposed and their feasibility explored.

Thermal Decomposition Products Of Kynol And Nomex With Reference To Structure And Toxicity, Shaker H. El-Sherbini

Theses

The purpose of this investigation was to study the combustion products of KYNOL and NOMEX as a fire retardant fibers. From the quantitative analysis data of the combustion products, the polymer structure is discussed and the property of thermal stability is explained.

From the analysis of the combustion products, the toxicity indices for the two fibers are determined. It is found to be 0.1 for KYNOL and 0.71 for NOMEX. This can be interpreted to mean that, if one gram of MIDI, is decomposed and the combustion products were diffused in one cubic meter of air, the probability of dying …

Analysis Of Combustion Products Of Kynol And Nomex, Abdul Halim Hassan Housny

Theses

The gaseous products generated by flaming combustion of Kynol and Nomex fibers under the same conditions (temperature 300-700°C, natural air) were quantitatively analyzed by infrared spectrophotometry, gas chromatography, mass spectrometry and a colorimetric tube method. The four techniques were chosen to examine the wide range of volatile and condensable products expected due to their different capabilities and sensitivities.

The main gases generated were carbon monoxide, carbon dioxide, methane and benzene.

The mass spectrometer was used to identify the condensed vapors. These were mainly phenol, methyl phenol and dimethyl phenol from the Kynol fiber and benzene, aniline, diaminobenzene, benzoic acid, benzonitrile, …

An Experimental Investigation Of Unbraced Reinforced Concrete Frames, Nourollah Samiee Nejad

Dissertations and Theses

The main objective of this investigation is to study experimentally the behavior of rectangular reinforced concrete frames subject to a combination of low column loads, beam loads, and lateral load. The analytical tool used in this investigation is a computer program which is a generalized computational method for non linear force deformation relationship and secondary forces due to displacement of the joints during loading.

In the experimental portion of this investigation, two rectangular frames, one design by the Ultimate Strength Design method and the other by a Limit Design method were prepared and tested to failure with short time loading. …

Effect Of Compliant Wall Motion On Turbulent Boundary Layers, Dennis M. Bushness, Jerry N. Hefner, Robert L. Ash

Mechanical & Aerospace Engineering Faculty Publications

A critical analysis of available compliant wall data which indicated drag reduction under turbulent boundary layers is presented. Detailed structural dynamic calculations suggest that the surfaces responded in a resonant, rather than a compliant, manner. Alternate explanations are given for drag reductions observed in two classes of experiments: (1) flexible pipe flows and (2) water-backed membranes in air. Analysis indicates that the wall motion for the remaining data is typified by short wavelengths in agreement with the requirements of a possible compliant wall drag reduction mechanism recently suggested by Langley. Copyright © 1977 American Institute of Physics.

Installation Induced Stresses For Grouted Roof Bolts, R. N. Nitzsche, Charles J. Haas

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The judicious use of roof bolts in stabilizing underground openings necessitates the ability to determine the state of stress in and around such bolts. A method of modeling a system of roof bolts is presented. This method is then applied in the determination of the state of stress due to bolt tightening. Two specific roof bolt configurations are considered: a fully grouted post-tensioned bolt and a post-tensioned bolt with grouted-end anchorage. The analysis showed that the grout annulus transferred nearly all of the bolt load 3nto the rock within a distance of 12 hole diameters from the point of bolt …

A Study Of The Vibrational Spectra Of Some Monosubstituted Benezene Derivatives Of Group Via Of The Periodic Table, Fawzi S. Rasheed

Theses

The vibrational frequencies for (C₆H₅)₂Se, (C₆H₅)₂Te, (C₆H₅)₂Se₂, (C₆H₅)₂Te₂, (C₆H₅)₂Hg, and (C6H5-Se)₂Hg are completely assigned and are consistent with the vibrational assignments for (C₆H₅)₂O, (C₆H₅)₂S, and (C₆H₅)₂S₂ previously reported. Further, whereas (C₆H₅)₂O and to a lesser extent (C₆H …

Ua64/3 Readout, Wku Industrial Education & Technology

WKU Administration Documents

Newsletter includes articles:

• New Departmental Programs
• Crisp, Jeff. Vocational-Industrial & Technical Teacher Education CBTE Project
• Lyons, Jerry. Not a Dirty Word, re productivity
• Conley, Frank. Comment, re: scholarships
• Dye, Wandel. Airbrush Rendering
• Student Chapter of SME Formed
• New Equipment Inventory
• Nalbach Demonstration Highlights Semester
• Environmental Science & Technology Building
• Industrial Technology Lecture Series

Industrial Projects Recommended By The Faculty Of Engineering Udsm, W Kreuser

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Plough Parts Production At Ubungo Farm Implements, F Kavishe

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Dynamics Of Explosion Remnants In Earth-Orbits, Joseph T. Fuss

Mechanical & Aerospace Engineering Theses & Dissertations

Explosions in space produce particles that are hazardous to space vehicles. Some of these particles are not trackable and their locations must be predicted by dynamical methods.

This investigation sheds light on three different, areas, First, ignoring perturbations, the characteristics of a three dimensional envelope outlined by the sum of individual particle orbits is determined, Second, the distribution of the particles is found as a function of time, Finally, the movement, of the body via secular perturbations is investigated. Magnitudes of the explosion, the point of. detonation in the parent satellite's orbit, and the radius of perigee of the parent …

A Study Of The Vibrational Spectra Of Some Monosubstituted Pyridines, Hussein Ibrahim Abdel-Shafy

Theses

Infrared spectra in the range (4000-250 cm^-1) and Raman spectra in the range (4000-150 cm^-1) of pyridine, 2-, 3- and 4-chloro-, bromo-, and methylpyridines, 2-fluoro-, 2-amino and 4-ethylpyridines have been measured. The spectra, vibration and assignments of the observed frequencies of 2-amino-, and 4-ethylpyridines are presented for the first time. The infrared data for 2-fluoropyridine is combined with the previously reported Raman data of Stephenson and Voelz to allow complete vibrational assignments for this compound for the first time. Frequency assignments for the other molecules are re-examined and where necessary changes and/or additions in frequency assignments …

Ua64/3 Readout, Wku Industrial Education & Technology

WKU Administration Documents

Newsletter includes the following articles:

• Environmental Science & Technology Building
• Redrup, Donald. A Philosophy of Industrial Arts - ?
• Conley, Franklin. A Comment, re: energy crisis
• Bywaters, Gary. Student vs Faculty Sports
• Redrup, Donald. Department Possesses EDM Capability
• Craftsman and Guitar Genuis Speaks, re: Hascal haile
• Bochan, John. Computer Controlled Machinery at WKU
• Bywaters, Gary. Western Wins at KIEA
• Mr. Walter Nalbach Honored.

Ua66/1/2 Scrapbook, Wku Ogden College Of Science & Engineering

WKU Administration Documents

Scrapbook of clippings, press releases, photographs and other items related to the history of Ogden College of Science & Technology from 1961 to 1974.

Deformation Of A System Of Clamped Thin Circular Plates With Liquid Filled Interspace., Archie Forrest Gatrost

Masters Theses

"In this work the behavior of a system of thin, circular clamped plates with liquid-filled interspace in a variable pressure environment was investigated. Six plates separated by liquid-filled chambers were arranged in alternate layers in a clamping device and a pressure was applied on one side of the six plate system. The deformation of each plate and the pressure distribution from the high pressure to low i i pressure side was measured. The plate deformation was measured by a strain gage attached at the apex of each plate and the chamber pressure by a strain gage pressure transducer.

The results …

Rubbery Acrylic Polymer Adhesives, Steven Walter

Theses

This study shows how rubbery acrylic polymer adhesives can be used to adhere rubber substrates to each other. Two substrate rubber compounds were used. A styrene-butadiene copolymer and a styrene-acrylonitrile copolymer. The adhesives were homopolymers based on polybutyl acrylate and poly2-ethyl hexyl acrylate.

Two reference standards were used. The first was commercial rubber based, solvent cements. The second was commercial acrylic solution polymers. All experimental work was compared to these standards. An attempt was made to optimize the adhesive components, as well as the adhesive application procedures and curing conditions.

A primer coating consisting of polymer, monomer, and catalyst was …

Biocatalytic Oxidation Of Nitrilotriacetate, Saul Hammerman

Theses

The specific scope of this work is to study the biological and chemical effects of a single genetic strain of bacteria, Bacillus subtilis #9524, on the specific destruction to innocuous products of sodium nitrilotriacetate (NTA) and sodium tripolyphosphate (STPP). Insofar as the same strain of bacteria was used each time, under limited variability and sterile conditions, the side effects of multiple bacterial strains and their inter-relationships among themselves and the organic substrates are eliminated. This has allowed for excellent replication of results.

This is a generalized technique for the evaluation of the biodegradability of a compound. Whereas tests with activated …

An Analysis Of The Geneva Mechanism As A Timing Device, Hubert W. Meyer

Theses

A mathematical analysis of the Geneva mechanism was conducted to determine the potential of this device as a tinting mechanism, and the feasibility of replacing the widely used pallet and starwheel escapement with a Geneva mechanism.

The primary objective of the study was to determine if the Geneva mechanism will attain a terminal velocity, and if so, how much time is required to reach this velocity.

To accomplish this objective, the differential equation of motion for the system was derived using Lagrangian dynatos. The equation was programmed and solved on a digital computer.

The study indicated that the Geneva mechanism …

The Chemistry Of Azides, Edward D. Nelson

Theses

A review of the decomposition of alkyl and aryl azides by thermolysis and photolysis has been accomplished. Organic azides are a very distinct species that undergo its own unique reactions. Azides decompose to form an electron deficient nitrogen having a sextet of elcctrons. This is called a Nitrene. Nitrenes can exist in the singlet or triplet state. The triplet behaves like a diradical. General and specific reactions of nitrenes have been shown with detailed mechanisms accounting for the products. The main modes of nitrene stabilization are rearrangement, hydrogen abstraction and insertion. Insertion is characteristic of singlet species and abstraction characteristic …

Stability Of Filled Cylindrical Shell Columns, Yu Wen Tsao

Masters Theses

"This experimental investigation was conducted to study the stability of filled cylindrical shell columns. Two kinds of filler materials, flower clay (florist clay) and silica sand, were investigated. The cylindrical shells were made of 2024-T3 Reynolds aluminum tubing. Uniaxial compressive loading was applied directly to the filler materials through two loading rams, one at each end of the cylinder, (no loading was applied directly to the shell). Tests for investigating the load transmitting characteristics of the filler materials were performed, and the states of the stresses existing in the cylindrical shells were then obtained.

The buckling formula for thin-walled cylindrical …

Investigation Of An Energy Absorbing Device For Passenger Safety, Prakash Krishnaswamy

Masters Theses

"Energy absorption by driving an oversized plunger through a longitudinally slit shell has been studied. The characteristics obtained by conducting several runs indicate that such a system could be used for energy absorption and for limiting the force required to drive the plunger through the shell. The characteristics can be readily altered by changing the dimensions of the tube. Details of the experimental set-up have been given.

Such an absorber has been adapted for mitigating injury sustained by the occupants in the interior of a colliding vehicle. Full advantage has been taken of the "Ride down" potential available to the …

Some Aspects Of Reliability Theory And Life Testing, Danny Laforrest Dunham

All Master's Theses

This paper explores the properties of the mean life of an item when an exponential density is assumed for the item's life length. Two different tests are discussed, one where the items are allowed to fail while on test without replacement, and the second test where the items are replaced as they fail. Finally the efficiency of the two tests is explored with respect to the number of items that are allowed to fail versus the length of the test.

Studies Of Bistable Fluid Devices For Particle Flow Control, Gerald H. Hogland

Dissertations and Theses

This study was directed toward the development of a bistable wall attachment Flip-Flop device which was capable of directionally controlling particle flow. The particles were transported by a fluid stream which under the influence of wall attachment. The dominant criteria in the development of the device was the achievement of the highest recovery of particles at the active output, without destroying the wall attachment of the fluid stream The experiment was conducted in several distinct stages; each of which was concerned with at least one aspect of wa1l attachment or particle flow. Results derived from one test were used to …

Finite-Element Analysis Of Pressure Vessels, Robert L. Davis, H. Dean Keith

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The finite-element technique has been applied in the analysis of a variety of pressure vessel problems. The example problems described in this paper suggest that the finite element method is perhaps the most suitable means currently available for obtaining quick and accurate solutions for real-life pressure vessel problems. Finite-element programs can be used by the practicing engineer. Companion programs are available that can be used to check the input data and graphically display both the input and output data. © 1972 by ASME.

Forming Of 7075-T6 Aluminum In High Pressure Environments, Richard L. Pendleton, Robert L. Davis

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Plates of 7075-T6 Aluminum have been folded along a major axis in pressure environments of atmospheric, 20,000 psi, and 40,000 psi. A finite element computer program is used to determine the stress state in the plates at various loads. Tension and compression tests conducted in pressure environments up to 70,000 psi were used to construct models using effective stress, effective strain, and pressure as parameters to predict the behavior of the material under various stress conditions. A prediction of the occurrence of fracture in the folded plate was possible using the computer results and the pressure dependent model. As better …

A Comparison Of Analytical And Experimental Approaches In Determining The Thermoelastic Stresses Around A Cylindrical Inclusion Of Elliptical Cross-Section, Kenneth Byron Oster

Masters Theses

"Three approaches are used to determine the principal stress differences in an infinite elastic medium containing a cylindrical inclusion of elliptic cross-section due to a uniform temperature change. First, the two-dimensional equations of thermoelasticity are solved resulting in equations for the stress components anywhere in the medium material. Second, boundary displacements based on stress-strain relations are used as input displacements in a finite element program of the medium. Third, these same boundary displacements are used as input displacements on a photoelastic model simulating the medium. The problem is treated as one of plane strain in the first approach and one …