Engineering Commons^™

Dynamics Of Explosion Remnants In Earth-Orbits, Joseph T. Fuss

Mechanical & Aerospace Engineering Theses & Dissertations

Explosions in space produce particles that are hazardous to space vehicles. Some of these particles are not trackable and their locations must be predicted by dynamical methods.

This investigation sheds light on three different, areas, First, ignoring perturbations, the characteristics of a three dimensional envelope outlined by the sum of individual particle orbits is determined, Second, the distribution of the particles is found as a function of time, Finally, the movement, of the body via secular perturbations is investigated. Magnitudes of the explosion, the point of. detonation in the parent satellite's orbit, and the radius of perigee of the parent …

A Study Of The Vibrational Spectra Of Some Monosubstituted Pyridines, Hussein Ibrahim Abdel-Shafy

Theses

Infrared spectra in the range (4000-250 cm^-1) and Raman spectra in the range (4000-150 cm^-1) of pyridine, 2-, 3- and 4-chloro-, bromo-, and methylpyridines, 2-fluoro-, 2-amino and 4-ethylpyridines have been measured. The spectra, vibration and assignments of the observed frequencies of 2-amino-, and 4-ethylpyridines are presented for the first time. The infrared data for 2-fluoropyridine is combined with the previously reported Raman data of Stephenson and Voelz to allow complete vibrational assignments for this compound for the first time. Frequency assignments for the other molecules are re-examined and where necessary changes and/or additions in frequency assignments …

Ua64/3 Readout, Wku Industrial Education & Technology

WKU Administration Documents

Newsletter includes the following articles:

• Environmental Science & Technology Building
• Redrup, Donald. A Philosophy of Industrial Arts - ?
• Conley, Franklin. A Comment, re: energy crisis
• Bywaters, Gary. Student vs Faculty Sports
• Redrup, Donald. Department Possesses EDM Capability
• Craftsman and Guitar Genuis Speaks, re: Hascal haile
• Bochan, John. Computer Controlled Machinery at WKU
• Bywaters, Gary. Western Wins at KIEA
• Mr. Walter Nalbach Honored.

Ua66/1/2 Scrapbook, Wku Ogden College Of Science & Engineering

WKU Administration Documents

Scrapbook of clippings, press releases, photographs and other items related to the history of Ogden College of Science & Technology from 1961 to 1974.

Deformation Of A System Of Clamped Thin Circular Plates With Liquid Filled Interspace., Archie Forrest Gatrost

Masters Theses

"In this work the behavior of a system of thin, circular clamped plates with liquid-filled interspace in a variable pressure environment was investigated. Six plates separated by liquid-filled chambers were arranged in alternate layers in a clamping device and a pressure was applied on one side of the six plate system. The deformation of each plate and the pressure distribution from the high pressure to low i i pressure side was measured. The plate deformation was measured by a strain gage attached at the apex of each plate and the chamber pressure by a strain gage pressure transducer.

The results …

Rubbery Acrylic Polymer Adhesives, Steven Walter

Theses

This study shows how rubbery acrylic polymer adhesives can be used to adhere rubber substrates to each other. Two substrate rubber compounds were used. A styrene-butadiene copolymer and a styrene-acrylonitrile copolymer. The adhesives were homopolymers based on polybutyl acrylate and poly2-ethyl hexyl acrylate.

Two reference standards were used. The first was commercial rubber based, solvent cements. The second was commercial acrylic solution polymers. All experimental work was compared to these standards. An attempt was made to optimize the adhesive components, as well as the adhesive application procedures and curing conditions.

A primer coating consisting of polymer, monomer, and catalyst was …

Biocatalytic Oxidation Of Nitrilotriacetate, Saul Hammerman

Theses

The specific scope of this work is to study the biological and chemical effects of a single genetic strain of bacteria, Bacillus subtilis #9524, on the specific destruction to innocuous products of sodium nitrilotriacetate (NTA) and sodium tripolyphosphate (STPP). Insofar as the same strain of bacteria was used each time, under limited variability and sterile conditions, the side effects of multiple bacterial strains and their inter-relationships among themselves and the organic substrates are eliminated. This has allowed for excellent replication of results.

This is a generalized technique for the evaluation of the biodegradability of a compound. Whereas tests with activated …

An Analysis Of The Geneva Mechanism As A Timing Device, Hubert W. Meyer

Theses

A mathematical analysis of the Geneva mechanism was conducted to determine the potential of this device as a tinting mechanism, and the feasibility of replacing the widely used pallet and starwheel escapement with a Geneva mechanism.

The primary objective of the study was to determine if the Geneva mechanism will attain a terminal velocity, and if so, how much time is required to reach this velocity.

To accomplish this objective, the differential equation of motion for the system was derived using Lagrangian dynatos. The equation was programmed and solved on a digital computer.

The study indicated that the Geneva mechanism …

The Chemistry Of Azides, Edward D. Nelson

Theses

A review of the decomposition of alkyl and aryl azides by thermolysis and photolysis has been accomplished. Organic azides are a very distinct species that undergo its own unique reactions. Azides decompose to form an electron deficient nitrogen having a sextet of elcctrons. This is called a Nitrene. Nitrenes can exist in the singlet or triplet state. The triplet behaves like a diradical. General and specific reactions of nitrenes have been shown with detailed mechanisms accounting for the products. The main modes of nitrene stabilization are rearrangement, hydrogen abstraction and insertion. Insertion is characteristic of singlet species and abstraction characteristic …

Stability Of Filled Cylindrical Shell Columns, Yu Wen Tsao

Masters Theses

"This experimental investigation was conducted to study the stability of filled cylindrical shell columns. Two kinds of filler materials, flower clay (florist clay) and silica sand, were investigated. The cylindrical shells were made of 2024-T3 Reynolds aluminum tubing. Uniaxial compressive loading was applied directly to the filler materials through two loading rams, one at each end of the cylinder, (no loading was applied directly to the shell). Tests for investigating the load transmitting characteristics of the filler materials were performed, and the states of the stresses existing in the cylindrical shells were then obtained.

The buckling formula for thin-walled cylindrical …

Investigation Of An Energy Absorbing Device For Passenger Safety, Prakash Krishnaswamy

Masters Theses

"Energy absorption by driving an oversized plunger through a longitudinally slit shell has been studied. The characteristics obtained by conducting several runs indicate that such a system could be used for energy absorption and for limiting the force required to drive the plunger through the shell. The characteristics can be readily altered by changing the dimensions of the tube. Details of the experimental set-up have been given.

Such an absorber has been adapted for mitigating injury sustained by the occupants in the interior of a colliding vehicle. Full advantage has been taken of the "Ride down" potential available to the …

Some Aspects Of Reliability Theory And Life Testing, Danny Laforrest Dunham

All Master's Theses

This paper explores the properties of the mean life of an item when an exponential density is assumed for the item's life length. Two different tests are discussed, one where the items are allowed to fail while on test without replacement, and the second test where the items are replaced as they fail. Finally the efficiency of the two tests is explored with respect to the number of items that are allowed to fail versus the length of the test.

Studies Of Bistable Fluid Devices For Particle Flow Control, Gerald H. Hogland

Dissertations and Theses

This study was directed toward the development of a bistable wall attachment Flip-Flop device which was capable of directionally controlling particle flow. The particles were transported by a fluid stream which under the influence of wall attachment. The dominant criteria in the development of the device was the achievement of the highest recovery of particles at the active output, without destroying the wall attachment of the fluid stream The experiment was conducted in several distinct stages; each of which was concerned with at least one aspect of wa1l attachment or particle flow. Results derived from one test were used to …

Finite-Element Analysis Of Pressure Vessels, Robert L. Davis, H. Dean Keith

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The finite-element technique has been applied in the analysis of a variety of pressure vessel problems. The example problems described in this paper suggest that the finite element method is perhaps the most suitable means currently available for obtaining quick and accurate solutions for real-life pressure vessel problems. Finite-element programs can be used by the practicing engineer. Companion programs are available that can be used to check the input data and graphically display both the input and output data. © 1972 by ASME.

Forming Of 7075-T6 Aluminum In High Pressure Environments, Richard L. Pendleton, Robert L. Davis

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Plates of 7075-T6 Aluminum have been folded along a major axis in pressure environments of atmospheric, 20,000 psi, and 40,000 psi. A finite element computer program is used to determine the stress state in the plates at various loads. Tension and compression tests conducted in pressure environments up to 70,000 psi were used to construct models using effective stress, effective strain, and pressure as parameters to predict the behavior of the material under various stress conditions. A prediction of the occurrence of fracture in the folded plate was possible using the computer results and the pressure dependent model. As better …

A Comparison Of Analytical And Experimental Approaches In Determining The Thermoelastic Stresses Around A Cylindrical Inclusion Of Elliptical Cross-Section, Kenneth Byron Oster

Masters Theses

"Three approaches are used to determine the principal stress differences in an infinite elastic medium containing a cylindrical inclusion of elliptic cross-section due to a uniform temperature change. First, the two-dimensional equations of thermoelasticity are solved resulting in equations for the stress components anywhere in the medium material. Second, boundary displacements based on stress-strain relations are used as input displacements in a finite element program of the medium. Third, these same boundary displacements are used as input displacements on a photoelastic model simulating the medium. The problem is treated as one of plane strain in the first approach and one …

The Analysis Of An Axially Symmetric Submerged Membrane Shell, Walter Earl Wehmeyer

Masters Theses

"The general theory of large elastic deformations is applied to the problem of a liquid-filled, axisymmetric membrane which is supported on a rigid horizontal plane and subjected to a variable external pressure. The variable external pressure is caused by submerging the membrane to various depths. The variation of the hydrostatic pressure in the inflating medium as well as in the surrounding environment is considered. By assuming large meridional deformations the stress field and the deformed shapes of a submerged membrane made of a neo-Hookean material are obtained. The effect of the initial shape on the deformed configuration of the membrane …

A Study Of The Effect Of Drilled Holes On The Concentration Of Elastic Stresses Around A Notch, Glenn Michael Kmecz

Masters Theses

"Hole drilling as a method for improving the toughness of notch weakened tensile specimens is investigated by means of a photoelastic technique. Tests were performed on 20%, 40%, 60%, and 80% notch depth specimens machined from PSM-1 photoelastic material. The basic criteria for success was no increase in the elastic stress concentration factor. The photoelastic results were verified by a finite element stress analysis of the 60% notch depth specimens. Comparison of the experimental and numerical results provide conclusive proof that no increase in the elastic stress concentration factor occurs when proper positioning of the drilled holes is accomplished"--Abstract, page …

Effects Of Cold Working Under Pressure On Subsequent Yield, J. G. Hoeg, Robert L. Davis

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A method utilizing high pressure fluid environments is described whereby a three-dimensional subsequent yield surface was determined for 304 stainless steel cylindrical parent specimens of this material were prestrained in axial compression under fluid pressure and then small sub specimens were sectioned from these parent specimens. Finite element techniques were used to optimize the parent specimen size so that a zone of uniform axial stress woidd result during the prestraining. Longitudinal strains in this zone were monitored during the prestraining and the subspecimens were cut from this region in a manner that did not allow the machining to appreciably affect …

Comparative Study Of Lightweight And Normal Weight Concrete In Flexure, Mohammad Zareh

Dissertations and Theses

This investigation represents a comparative study of the flexural behavior of lightweight and normal weight concrete. Both theoretical and experimental moment-curvature characteristics of the tested specimens were used to study the flexural behavior.

A generalized computer program to determine the moment-curvature relationships of a singly reinforced rectangular concrete beam was developed.

For this limited study it was observed that lightweight concrete beams when compared to normal concrete beams achieve comparable moment capacity (about 92% of normal weight concrete) but exhibit higher deflections (about 40% more than normal weight concrete).

Free Vibrations Of Circular Cylindrical Shells, Sushil Kumar Sharma

Masters Theses

"In this report bending theory of shells is used to determine the natural frequencies and mode shapes of circular cylindrical shells. The governing eighth-order system of differential equations has been put in a form which is especially suitable for numerical integration and application of different sets of homogeneous boundary conditions. The Holzer method is used to solve the eigenvalue problem. During numerical integration of the differential equations, the exponentially growing solutions are suppressed whenever they become larger than previously selected values. Numerical results are obtained for various shell geometry parameters and for three different sets of homogeneous boundary conditions. These …

Normal Mode Method Applied To The Transient Longitudinal Vibrations Of A Finite Rod With Material Damping And Viscoelastic Dispersion, David Arthur Levene

Masters Theses

"Longitudinal vibrations of a finite rod with material damping and frequency dependent material properties are examined. The normal mode method is used to investigate the transient response of a rod which is free to move in the longitudinal direction and is subjected to a transient longitudinal loading condition at one end. The equations of motion are derived and solved using both the differential equations approach and the energy methods approach of the normal mode method. The effects of material damping and frequency dependent material properties are considered by formulating the stress-strain relation for the material such that the modulus of …

An Energy Solution For Vibration Characteristics Of Free Thin Cylinders, Dale Elmer Leanhardt

Masters Theses

"In this report the flexural vibrations of the walls of free, thin, circular cylinders are considered. Theoretical expressions are developed for the natural frequencies by extending the approximate energy method of Arnold and Warburton to the free-free case. Furthermore, the developed expressions are shown to apply, as special cases, to the fixed-fixed and simply-supported cylinders analyzed by Arnold and Warburton. The energy solution for free-free cylinders is checked both experimentally using a 3500 pound-force, 5 to 2000 hertz, vibration exciter and numerically using the well documented SABOR IV-DYNAL finite element program. While the derived energy method accounts for any prescribed …

Hydrostatic Extrusion Of Tubular Products, John Lester Roth

Masters Theses

"The production of quality tubular products by hydrostatic extrusion has been demonstrated to be a highly satisfactory method. The forming of tubes by the floating mandrel method has been accomplished on mild steel, aluminum alloy, and brass. This thesis describes the method, equipment design and operation, and the results obtained in the hydrostatic tube extrusion. A discussion on the advantages of the use of hydrostatic over conventional extrusion is included. The hydrostatic extrusion system designed for this study is described in detail"--Abstract, page ii.

An Investigation Of Stress In The Monowall Construction System Subjected To Racking Loads, Louis Alex Kuhlmann

Masters Theses

"Several methods of analysis were employed to investigate the stress conditions of concrete block built in the MONOWALL Construction System, when subjected to racking loads. MONOWALL is a technique of assembling blocks with adhesive rather than conventional portland cement mortar. The analyses used in this study included strain gages on full-scale walls, photoelastic models, and a mathematical solution. Each method of analysis is reported separately in detail and the results compared to each other"--Abstract, page ii.

Continuous Interfacial Polycondensation Of Nylon 6-10, Sumer Raj Hundia

Theses

Nylon 6-10 has been prepared by continuous interfacial polycondensation hexamethylenedlamine and sebacoyl chloride in a stirred system. The effect of monomer concentration and stirring on the intrinsic viscosity of the polyamide 6-10 solution in m-cresol was measured.

As stirring (RPM) and monomer increased the intrinsic and the polymer yield through a maximum. Diffusion coefficients (D_AB) for hexamethylenedlamine were for hexamethylenedlamine were and were used for the calculations of j_D factors and K/DAB ratios. A relationship and j_D factors was established by a correlation curve.

Australian Tractor Test Report No. 58 : Massey-Ferguson 165, G H. Vasey, W. T. Brown

Journal of the Department of Agriculture, Western Australia, Series 4

THE Massey-Ferguson 165 is a general purpose farm tractor. The test tractor gave 50 drawbar h.p. with 59 h.p. at the P.T.O. at rated engine speed it comes within Class 5 of the Australian Standard Classification of Wheeled Tractors for Agricultural Purposes, AS Dl 0-1967. It is equipped with 18.4 x 28 in. pneumatic tyres. It has a threespeed gear box with a ratio change giving 6 forward and reverse speeds.

A Study Of The Effects Of Pressure-Induced Viscosity Changes On The Fluid Flow Characteristics In A Circular Tube, Robert Charles Weber

Masters Theses

"A method of determining the response of fluids under high pressure to quick-release into the atmosphere is presented in this report. The analytical efforts have been formulated into two parts, a closed-form solution and a numerical analysis. By assuming constant viscosity of the fluid a closed-form solution was obtained. The assumption of constant viscosity was found to be acceptable for the test fluids up to an initial pressure of approximately 10,000 psi. A numerical analysis became necessary for initial pressures over 10,000 psi, where the variable viscosity of the fluid had to be considered. The experimental work was conducted by …

The Design, Construction And Experimental Verification Of A Split Hopkinson Bar, Woosoon Bai

Masters Theses

"This thesis presents the design considerations for a dynamic loading device utilizing a projectile fired from a tube. Also included is a preliminary investigation of the stress-strain relation, under dynamic loading with the device, for a plaster known as Hydrostone. Design of the unit is based on the split Hopkinson pressure bar originally developed by Kolsky and on a similar unit in use at the Lawrence Radiation Laboratory, Livermore, California. The strain pulses along the pressure bars are sensed by resistance wire strain gages and displayed on an oscilloscope. The oscilloscope traces are photographed and manually digitized for insertion into …

Failure Of Lined And Unlined Small-Scale Cavities In Rock-Like Materials, Seung-Ki Yang

Masters Theses

"The strain conditions around statically loaded circular openings in rock-like materials and corresponding cavity-wall displacements were determined experimentally with resistance strain gages. The models were fabricated with lined and unlined openings simulating underground tunnels. Tests were performed with models of two different materials in plane stress and plane strain. Rock-like materials were designed and the strain gages were embedded at selected points within each model. The models often failed by tensile splitting through the opening early in the loading cycle causing the strains at certain points to deviate considerably from the theoretical values. Tangential strains on the vertical axis were …