Engineering Commons^™

On The Comparison Of Flow Physics Between Minimal And Extended Flow Units In Turbulent Channels, Ethan A. Davis, Siamak Mirfendereski, Jae Sung Park

Department of Mechanical and Materials Engineering: Faculty Publications

Direct numerical simulations were performed to study the effects of the domain size of a minimal flow unit (MFU) and its inherent periodic boundary conditions on flow physics of a turbulent channel flow in a range of 200 ≤ Re_τ ≤ 1000. This was accomplished by comparing turbulent statistics with those computed in sub-domains (SD) of extended domain simulations. The dimensions of the MFU and SD were matched, and SD dynamics were set to minimize artificial periodicities. Streamwise and spanwise dimensions of healthy MFUs were found to increase linearly with Reynolds number. It was also found that both MFU …

An Integrated Resource Plan Public Service Company Of Colorado (Psco), Angela Paola Ortiz Cely

Master's Projects and Capstones

This report presents an Integrated Resource Plan (IRP) for Public Services of Colorado (PSCo). PSCo is a rate-regulated investor-owned electric utility (IOU) incorporated in 1924 and a subsidiary of Xcel Energy. PSCo largely serves the metropolitan areas of Colorado.

Criteria For Assessing The Provision Of Transport Services To Passengers In The Urban Community, А. Nazarov, А. Ustaboyev

The Scientific Journal of Vehicles and Roads

The article presents the criteria for assessing the provision of transport services to passengers in the city public sector. As the main criterion for the provision of services in the church environment, the time spent by passengers to navigate on the road and the organizers of it were taken. Based on these criteria is based on the parameters of the transport service provision to passengers.

Converting Inorganic Rust To Organic Nanostructured Conducting Polymers: Synthesis And Applications, Yifan Diao

McKelvey School of Engineering Graduate Student Theses & Dissertations

Iron rust is a type of corrosion product, coming from the chemical reaction between iron and oxygen in the presence of water that first documented ca. 800 BCE. It is a heterogeneous inorganic solid-state material composed of multiple phases and is ubiquitous throughout the universe. Rust species such as Hematite (α-Fe2O3), Akaganeite (β-FeOOH), and ferrous hydroxide (Fe(OH)2), make up the solid-state chemical family composed of iron oxides, oxyhydroxides, and hydroxides that are typically recognized as chemical waste. Conducting polymer is a type of organic plastic composed of long chains with repeating subunits that bonding with strong interactions between neighboring molecules. …

Plasmonically-Enhanced Ultrasensitive Biodetection Technologies, Zheyu Wang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Detection and quantification of biomolecules within biological fluids and tissues is of fundamental importance to biomedical research and clinical diagnostics. It is impossible to fully characterize complex, non-linear, biochemical systems without being able to accurately and quantitatively determine the component molecules. This problem is ubiquitous across all domains of biomedical research, and it is a major barrier to fully understanding health, ageing, and disease. Such bottlenecks are extremely challenging to be solved, especially for proteins and peptides, which do not have amplification schemes such as polymerase chain reaction for nucleic acids, because relevant concentrations of molecules related to diseases such …

Characterization Of Landslide Processes From Radar Remote Sensing And Hydromechanical Modeling, Yuankun Xu

Earth Sciences Theses and Dissertations

Landsides are a natural geomorphic process yet a dangerous hazard which annually causes thousands of casualties and billions of property loss in a global scale. Understanding landslide motion kinematics from early initiation to final deposition is critical for monitoring, assessing, and forecasting landslide movement in order to mitigate their hazards. Landslides occur under diverse environmental settings and appear in variable types; however, all types of landslides can be mechanically attributed to shearing failure at the basal surface due to stress regime shift contributed by internal and/or external forcing. Typical internal factors include soil/rock weathering, whereas typical external triggering forces encompass …

Aerosol Vapor Synthesis Of Organic Processable Pedot Particles And Measuring Electric Conductivity Using A 3d Printed Probe Station, Yang Lu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Conducting polymers are organic semiconductors characterized by conjugated backbones (alternating single-double bonds) that enable mixed ionic-electronic conductivity. Their polymeric nature, tunable band structure and reversible redox capability have demonstrated fundamental advances in the fields ranging from electrochemical energy storage, sensing, to electro/photo catalysis and neuromorphic engineering. Conjugated backbones, the origin of all the unique physical and chemical properties associated with conducting polymers, prevent their solubility due to high lattice energy which hinders processing. Current solution utilizes a long-chain polymer (PSS) as dopants to render conducting polymer water dispersible (PEDOT:PSS). Nonetheless, PSS is highly acidic and hydrophilic limiting applicability with acid-incompatible …

Rational Design And Optimization Of Perovskite Semiconductors, Arashdeep Thind

McKelvey School of Engineering Graduate Student Theses & Dissertations

ABSTRACT OF THE DISSERTATIONRational design and optimization of perovskite semiconductors by Arashdeep Singh Thind Doctor of Philosophy in Materials Science and Engineering Washington University in St. Louis, 2021 Professor Rohan Mishra, Chair

Lead-halide perovskites have emerged as a promising class of semiconductors for next-generation solar cells and optoelectronic devices. Since the report of the photovoltaic effect in 2009 in CH3NH3PbBr3 and CH3NH3PbI3, the power conversion efficiency of these perovskites has rapidly approached 25.2% from 3.8%. These perovskite semiconductors can be synthesized using low-cost solution-based techniques, unlike traditional semiconductors that require slow and expensive growth techniques to reduce the formation of …

Modeling Hydraulic Fracturing Initiation And Propagation In Porous Rock Formationsl, Chang Huang

LSU Doctoral Dissertations

Hydraulic fracturing has long been introduced to the oil and gas industry since the early nineteenth century for both reservoir characterization and reservoir stimulation. Despite the progress made in the last two decades, many challenges still have not been tackled regarding not only the propagation problem but also the initiation problem due to its complexity. The dissertation is divided into two stages, i.e., before and after fracture initiation. The first stage of the research aimed at improving the accuracy in solving the poro-mechanical response of wellbore during fluid injection before a tensile fracture occurs, which is crucial to determine the …

Understanding Of Aerosol Transmission Of Covid 19 In Indoor Environment - Part 2: Approaches To Mitigation, Adama Barro, Cathal O'Toole, Jacob S. Lopez, Matthew Quinones, Sherene Moore

Publications and Research

The challenge we face in implementing solutions for new HVAC ventilation and filtration design, is to effectively improve air quality for virus mitigation without losing performance efficiency. The purpose of this improvement is to decontaminate the occupied enclosed areas, reducing the transmission of the corona virus aerosol transmission. Our research seeks reliable approaches to mitigate the further spread of aerosol transmission in indoor spaces. The methodology is to examine innovative HVAC engineering solutions that combat epidemiological problems of Covid-19 for the post-pandemic era, by researching scholarly articles and ASHRAE journals. We are achieving the goal of finding highly efficient resolutions …

Higher-Order Topolectrical Semimetal Realized Via Synthetic Gauge Fields, Xiang Ni, Andrea Alù

Advanced Science Research Center

Classical bosonic systems may be tailored to support topological order and unidirectional edge transport exploiting gauge fields. Here, we theoretically explore how synthetic gauge fields may be used to induce higher-order topological phases and zero-energy boundary states. We demonstrate these principles in two types of three-dimensional topolectrical circuits with synthetic gauge fields threading through their reduced two-dimensional lattices, leading to a half-quantized quadrupole charge within a region of the momentum space. We theoretically show the emergence of nodal line rings and Weyl points in the bulk dispersion, whose projected surfaces and hinges support surface Fermi arcs and flat hinge Fermi …

High Frequency Electron Spin Resonance Investigations On Quasi-Two-Dimensional Chromium Halide Magnets, Christian Saiz

Open Access Theses & Dissertations

Broadening the knowledge and understanding on the magnetic correlations in van der Waals layered magnets is critical in realizing their potential next-generation applications in devices such as spintronics. In this study, we employ high frequency (ν = 120 GHz, 240 GHz) electron spin resonance (ESR) spectroscopy on plate-like CrX3 (where X = Cl, Br, I) to gain insight into the magnetic interactions as a function of temperature (200 – 4.4 K) and the angle of rotation θ (degrees). We find that the temperature dependence of the ESR linewidth is well described by the Ginzburg-Landau critical model, indicative of antiferromagnetic correlations …

Synthesis And Characterization Of Functiona Materials For 3d Printed Composites, Elizabeth Irene Reza

Open Access Theses & Dissertations

The following body of work encompasses the synThesis, upscaling, additive manufacturing, and characterization of microspheres as functional fillers incorporated into polymer syntactic foams. Synthesizing microspheres permits control over morphology, dispersion of particles, and size while the use of direct write manufacturing allowed for the controllability of filler orientation. Two different syntactic foams were developed from similar methodologies: (1) a silicone syntactic foam (2) epoxy syntactic foam. The silicone epoxy foam showed an increasing in damping and elastic modulus. The epoxy syntactic foams showed an enhanced thermal and electrical properties.

Mechanical Behavior Of Cyclo-18 On Nickel And Copper Substrates, Reagan Michael Kraft

Mechanical Engineering Undergraduate Honors Theses

Carbyne, an -hybridized allotrope of carbon, has been the subject of many studies recently due to its incredible mechanical properties and small size. More recently, another -hybridized allotrope known as cyclo-18, has gained interest. In this study, computational molecular dynamics will be used to determine the mechanical properties of cyclo-18. Peeling and shearing tests of the molecule will be conducted on nickel and copper, which are respectively active and less-active transition metals. Additionally, a carbyne chain of equal length will undergo the same tests on the copper substrate to compare the mechanical properties of the two. The results conclude that …

Design And Control Of A Peristaltic Pump To Simulate Left Atrial Pressure In A Conductive Silicone Model, Jeremy Collins

Mechanical Engineering Undergraduate Honors Theses

According to the CDC, atrial fibrillation is responsible for more than 454,000 hospitalizations and approximately 158,000 deaths per year. A common treatment for atrial fibrillation is catheter ablation, a process in which a long flexible tube is guided through the femoral artery and to the source of arrhythmia in the heart, where it measures the electrical potential at various locations and converts problematic heart tissue to scar tissue via ablation. This paper details the design and control of a low-cost ($400) peristaltic pump system using repetitive control to replicate blood pressure in the left atrium in a conductive silicone model …

A Study Of The Frustrated Honeycomb Battery Material Na2ni2teo6, Nathan Christopher Episcopo

Open Access Theses & Dissertations

The P2-type layered hexagonal compound Na2Ni2TeO6 with Ni2+ on a honeycomb lattice was synthesized by the standard solid-state route. Structural characterization chemical phase purity was confirmed by Rietveld refinement of laboratory and synchrotron data. The crystal structure refines well in the P63/mcm space group. Single crystal growth trials using the self-flux-melt method were conducted with limited success. The magnetic transition temperature pertaining to Ni2+ lattice was confirmed by analysis of specific heat capacity to be . The magnetic susceptibility remains largely unchanged in magnetic field of and external pressure of . There is an almost linear response in isothermal magnetization …

New Generation Of Performance-Engineered Asphalt Mixtures Based On Balanced Mix Design Concept, Victor Manuel Garcia

Open Access Theses & Dissertations

Asphalt mixtures must ideally exhibit long-lasting durability and stability to perform wellin the field. However, improving the stability and durability of asphalt mixtures has become a major concern. Given that available design approaches rely mainly on stringent volumetric criteria for asphalt mixtures, design approaches and specifications that incorporate performance tests are needed to follow a performance-engineered mix design (PEMD) process, especially with the introduction of the balanced mix design (BMD) concept

This Dissertation study presents a comprehensive investigation of a feasible designapproach that can be implemented to develop PEMD specifications and produce BMD mixtures. An experimental evaluation of different mix …

Development And Testing Of Nanostructured Materials For Extreme Environment Applications, Nanthakishore Makeswaran

Open Access Theses & Dissertations

Nanostructured materials have many potential applications in the fields of power generation and transportation technologies, particularly in the areas of gas sensing technology, industrial gas turbines and protective coatings. In the former case β-Ga2O3 represents a promising candidate due to its high degree of stability and functionality for oxygen sensing at higher temperatures (>700oC). In the latter case, the application of Y-Si-Fe compounds acting as environmental barrier coatings for gas turbine and aerospace engine applications to protect from corrosion effects has been demonstrated in recent years. In both cases, however, there is room for improvement whether it is in …

Post Processing Of Electron Beam Melted Ti-6al-4v And Binder Jetted 17-4 Stainless Steel, Ahmad Omar Abu-Issa

Open Access Theses & Dissertations

An extensive assortment of HIP parameters have been altered on EBM fabricated Ti-6Al-4V and have shown that cooling rates of 103 oC/min from temperatures above and below the beta transus produced acicular alpha-prime martensite characteristic elongations < 10 %. Optimum yield strength (0.9 GPa), UTS (1.0 GPa) and elongation (~14 %) were achieved for slow cooling (at 102 oC/min) from 850 oC HIP which produced a dense, Widmanstatten alpha structure within the retained, as-fabricated columnar grains by alpha-prime decomposition. These results suggest that manipulation of AM process parameters to produce a small-grain, equiaxed microstructure, HIPed below the beta transus and slow cooled, will have a wide range of superior, isotropic mechanical properties corresponding to a Widmanstatten alpha microstructure within the equiaxed grains. Also, Binder Jetting printing parameters for differing PSD's of low-cost water-atomized 17-4 Stainless Steel were optimized in order to produce high dense parts. Densities ranging from 94-97.5% were achieved, and issues of inhomogeneous porosity were addressed using a fumed silica flow additive.

A Hyperelastic Porous Media Framework For Ionic Polymer-Metal Composites And Characterization Of Transduction Phenomena Via Dimensional Analysis And Nonlinear Regression, Zakai J. Olsen

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ionic polymer-metal composites (IPMC) are smart materials that exhibit large deformation in response to small applied voltages, and conversely generate detectable electrical signals in response to mechanical deformations. The study of IPMC materials is a rich field of research, and an interesting intersection of material science, electrochemistry, continuum mechanics, and thermodynamics. Due to their electromechanical and mechanoelectrical transduction capabilities, IPMCs find many applications in robotics, soft robotics, artificial muscles, and biomimetics. This study aims to investigate the dominating physical phenomena that underly the actuation and sensing behavior of IPMC materials. This analysis is made possible by developing a new, hyperelastic …

Study Of Static And Dynamical Properties Of Complex Antiferroelectrics Materials, Kinnary Yogeshbhai Patel

Graduate Theses and Dissertations

The aim of this dissertation is the investigation of the static and dynamical properties of the complex antiferroelectric materials using Effective Hamiltonian method and First principles calculations. In chapter 3, a novel elemental interatomic coupling in perovskite materials which bilinearly couples the antiferroelectric displacements of cations with the rotations of the oxygen octahedra. This new coupling explains a very complex crystal structure of prototypical antiferroelectric PbZrO3. My explanation provides a unified description of many other complex antipolar crystal structures in variety of perovskite materials, including the occurrence of incommensurate phases in some of them. In chapter 4, results and analysis …

Mixed Mode Crack Propagation In Iliac Bone, E. Baesu, Dm. Iliescu, Bv. Radoiu, S. Halichidis

Department of Mechanical and Materials Engineering: Faculty Publications

Bone is a complex material that can be regarded as an anisotropic elastic composite material. The problem of crack propagation in hu- man bone is analyzed by using a generalization of the maximum tensile stress criterion (MTS). The results concern the critical stress for crack propagation and the direction of the crack path in Iliac bone.

Special Issue “Cfd Modeling Of Complex Chemical Processes: Multiscale And Multiphysics Challenges”, Li Xi, De-Wei Yin, Jae Sung Park

Department of Mechanical and Materials Engineering: Faculty Publications

No abstract provided.

Application Of Atomically Precise Metal Nanoclusters In Electrocatalysis, Zhi-Hua Zhuang, Wei Chen

Journal of Electrochemistry

Metal nanoclusters (M NCs) consist of only several to a few hundred of metal atoms and possess core sizes less than 2 nm. Owing to the quantum size effect, the electronic states of M NCs evolve to discrete levels similar to the molecule energy gaps, other than a continuous density of states to produce plasmon characteristic of bulk metal nanoparticles (M NPs). In comparison with the conventional M NPs, M NCs exhibit dramatically unique electronic and optical properties, such as molecule-like energy gaps, strong photoluminescence and high catalytic properties, which make them promising for potential application in numerous fields, such …

Electrochemiluminescence Imaging Hydrogen Evolution Reaction On Single Platinum Nanoparticles Using A Bipolar Nanoelectrode Array, Xiang Qin, Zhong-Qiu Li, Jian-Bin Pan, Jian Li, Kang Wang, Xing-Hua Xia

Journal of Electrochemistry

A high-density (5.7 × 10⁸ cm^-2) nanoelectrode array with the electrode diameter of 200 nm and the interelectrode distance of 450 nm were fabricated. The nanoelectrode array consisted of gold nanowires embedded in a porous anodic aluminum oxide (AAO) matrix, having regular nanoelectrode distribution and highly uniform nanoelectrode size. The gold nanoelectrode array was used as a closed bipolar nanoelectrode array combined with electrochemiluminescence (ECL) method to map the electrocatalytic activity of platinum nanoparticles toward hydrogen evolution reaction (HER) by modifying the catalysts on single nanoelectrodes. Results show that HER on single bipolar nanoelectrodes could be imaged …

Oxygen-Exposure Induced Rapid Oxidation Of Spiro-Ometad In Cspbibr2 Perovskite Solar Cells, Wei-Guo Wang, Tian Bai, Gao-Fei Xue, Mei-Dan Ye

Journal of Electrochemistry

2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenyl-amine)-9,9′-spirobifluorene (Spiro-OMeTAD) is the most widely used hole transport material in perovskite solar cells (PSCs). However, its oxidation in the air takes a long time and results in the attack of perovskite by water. In this regard, we performed the oxidation process of Spiro-OMeTAD in oxygen, where perovskite can be protected from water, guaranteeing the integrity of perovskite. It was demonstrated that the champion Spiro-OMeTAD based CsPbIBr₂ PSCs after oxygen oxidation achieved a 7.19% power conversion efficiency (PCE), showing a higher PCE than 6.29% of the champion device oxidized in air. A series of electrochemical characterization methods were applied …

Theoretical Studies Of Metal-N-C For Oxygen Reduction And Hydrogen Evolution Reactions In Acid And Alkaline Solutions, Xue-Ping Qin, Shang-Qian Zhu, Lu-Lu Zhang, Shu-Hui Sun, Min-Hua Shao

Journal of Electrochemistry

Single atom catalysts (SAC) have been regarded as the promising alternatives to platinum group metals due to their low costs and potentially high catalytic activities in various electrocatalytic reactions. The atomic mechanism understanding of activity discrepancy among different metal and nitrogen co-doped carbon-based catalysts is still lacking. Here, non-precious metal and nitrogen co-doped carbons (Me-N-C, Me = Fe and Co) as the model catalysts are investigated by combining experimental and theoretical studies to explore the catalytic activities and corresponding reaction mechanisms toward oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) at universal pHs. Atomic theoretical simulations suggest that Fe-N-C …

Lithium Storage Performance Of Hard Carbons Anode Materials Prepared By Different Precursors, Zhen-Lang Liang, Yao Yang, Hao Li, Li-Ying Liu, Zhi-Cong Shi

Journal of Electrochemistry

Hard carbon is one of the most promising anode material for lithium ion batteries (LIBs) owing to its high stability, widespread availability, low-cost, and excellent performance. The electrochemical properties of hard carbon materials depend strongly on the type of precursors. It is, therefore, very important to choose an excellent hard carbon precursor. Polyacrylonitrile, petroleum pitch and peanut shells were used as raw materials to prepare different hard carbon anode materials for LIBs. These hard carbon anode materials were successfully synthesized in two steps. The selected precursor was firstly carbonized at 600℃ for 1 h in argon atmosphere using heating rate …

Pd-Based Electrocatalysts For Oxygen Reduction And Ethanol Oxidation Reactions: Some Recent Insights Into Structures And Mechanisms, Zhi-Peng Wu, Chuan-Jian Zhong

Journal of Electrochemistry

The development of efficient electrocatalysts for applications in fuel cells, including proton-exchange membrane fuel cell (PEMFC) and direct ethanol fuel cell (DEFC), has attracted extensive research attention in recent years. Oxygen reduction reaction and ethanol oxidation reaction are two of the key reactions where the design of active, stable and low-cost electrocatalysts is critical for the mass commercializations of PEMFCs and DEFCs. This challenge stems largely from the limited understanding of the catalyst structures and reaction mechanisms. Progress has been made in investigations of electrocatalysts derived from Pd-based alloy nanomaterials both experimentally and computationally. We highlight herein some of the …

Preparation And Characterization Of "Water-In-Salt" Polymer Electrolyte For Lithium-Ion Batteries, Xu Hou, Xin He, Jie Li

Journal of Electrochemistry

Since the development of wearable and flexible electronic products, the demand of flexible energy storage devices such as batteries and super capacitors is in urgent. To enhance the safety and cycling stability for flexible lithium-ion batteries, “water-in-salt” polymer electrolyte was prepared by introducing 21 mol·kg^-1 LiTFSI electrolyte into cross-linked polyacrylamide (PAM) after freeze-drying. A great amount of holes with the size range of 10 ~ 20 μm can be found on the surface and in the bulk of polyacrylamide, which is benefited from the freeze-drying process and acts as a great support for the electrolyte uptake. The “water-in-salt” polymer …