Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electrical and Electronics

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 4381 - 4410 of 5696

Full-Text Articles in Engineering

Packet Data Communications Over Coded Cdma With Hybrid Type-Ii Arq, Seokhyun Yoon Jan 2003

Packet Data Communications Over Coded Cdma With Hybrid Type-Ii Arq, Seokhyun Yoon

Dissertations

This dissertation presents in-depth investigation of turbo-coded CDNIA systems in packet data communication terminology. It is divided into three parts; (1) CDMA with hybrid FEC/ARQ in deterministic environment, (2) CDMA with hybrid FEC/ARQ in random access environment and (3) an implementation issue on turbo decoding.

As a preliminary, the performance of CDMA with hybrid FEC/ARQ is investigated in deterministic environment. It highlights the practically achievable spectral efficiency of CDMA system with turbo codes and the effect of code rates on the performance of systems with MF and LMMSE receivers, respectively. For given ensemble distance spectra of punctured turbo codes, an …


Robust And Efficient Video/Image Transmission, Xi Min Zhang Jan 2003

Robust And Efficient Video/Image Transmission, Xi Min Zhang

Dissertations

The Internet has become a primary medium for information transmission. The unreliability of channel conditions, limited channel bandwidth and explosive growth of information transmission requests, however, hinder its further development. Hence, research on robust and efficient delivery of video/image content is demanding nowadays.

Three aspects of this task, error burst correction, efficient rate allocation and random error protection are investigated in this dissertation. A novel technique, called successive packing, is proposed for combating multi-dimensional (M-D) bursts of errors. A new concept of basis interleaving array is introduced. By combining different basis arrays, effective M-D interleaving can be realized. It has …


Deposition And Characterization Of Magnetron Sputtered Bcc Tantalum, Anamika Patel Jan 2003

Deposition And Characterization Of Magnetron Sputtered Bcc Tantalum, Anamika Patel

Dissertations

The goal of this thesis was to provide scientific and technical research results for developing and characterizing tantalum (Ta) coatings on steel substrates deposited by DC magnetron sputtering. Deposition of tantalum on steel is of special interest for the protection it offers to surfaces, e.g. the surfaces of gun barrels against the erosive wear of hot propellant gases and the mechanical damage caused by the motion of launching projectiles. Electro-plated chromium is presently most commonly used for this purpose; however, it is considered to be carcinogenic in its hexavalent form. Tantalum is being investigated as non-toxic alternative to chromium and …


Vlsi Design Of Stability Routing Protocol For Sensors In Wireless Mobile Ad-Hoc Networks, Vishnu M. Mandava Jan 2003

Vlsi Design Of Stability Routing Protocol For Sensors In Wireless Mobile Ad-Hoc Networks, Vishnu M. Mandava

Theses

This thesis gives a detailed description of the Application specific integrated circuit (ASIC) design of Stability routing protocol for sensors in mobile ad-hoc networks. The Stability routing protocol is based on the signal strength and position components during data transmission while considering sensors in an ad-hoc network. A general ad-hoc network has unpredictable and variable mobility patterns therefore the signal strength criteria is adopted for routing. Signal strength criteria has been proved to be efficient for communication between the mobile nodes without any data loss. In this thesis an architecture for a processor implementing stability routing protocol for effective communication …


Firewall Interface For Java Ftp Smtp And Http Servers, Ratan Kumar Erukulla Jan 2003

Firewall Interface For Java Ftp Smtp And Http Servers, Ratan Kumar Erukulla

Theses

The objective of my thesis is to develop a firewall interface for FTP, HTTP and SMTP servers. A firewall interface is a graphical user interface (GUI) to configure the properties of the server. Using this interface, we can spy a user, block and unblock the IP address of a client, display statistics of user and server. We can track all the user actions while he is connected to the server. These actions are logged and based on the log data we can deny access to users performing illegal operations. All the servers and interfaces are written in Java. Java was …


An Interface Chip For Saw Based Sensor In An Ad-Hoc Network, Yagneshwara Ramakrishna Vadapalli Jan 2003

An Interface Chip For Saw Based Sensor In An Ad-Hoc Network, Yagneshwara Ramakrishna Vadapalli

Theses

The design of a smart integrated chemical sensor system that will enhance sensor performance and compatibility to ad hoc network architecture remains a challenge. This work involves the design of an interface chip for a Surface Acoustic Wave (SAW) based chemical sensor where the sensor reflects the RF input and introduces a time delay proportional to the concentration of the vapors absorbed by it. The interface chip detects the frequency shift as a function of the chemical species absorbed by the sensor and alerts the ad hoc network controller when a monitored parameter exceeded some threshold, based on local processing …


Study Of Structure And Quality Of Different Silicon Oxides Using Ftir And Raman Microscopy, C. Moore, T. S. Perova, B. Kennedy, Kevin Berwick, I. I. Shaganov, R. A. Moore Jan 2003

Study Of Structure And Quality Of Different Silicon Oxides Using Ftir And Raman Microscopy, C. Moore, T. S. Perova, B. Kennedy, Kevin Berwick, I. I. Shaganov, R. A. Moore

Articles

In this work, SiO2 and fluorine and phosphorous doped SiO2 thin films are investigated using FTIR and Raman techniques. FTIR spectroscopy was performed at normal and oblique incidence of the probe beam in transmission and reflection modes. The effect of polarisation and angle of incidence of the probe beam is examined for the case of reflection mode. Infrared spectra taken from doped oxides show that the structure changes with the passage of time. Alternate methods to calculate the thickness of the doped film are therefore discussed. Infrared spectra of electron beam evaporated oxides give valuable information on their …


Automated Distribution And Management Of Software And Hardware Configurations For Heterogeneous Wireless Devices, Grainne Foley Jan 2003

Automated Distribution And Management Of Software And Hardware Configurations For Heterogeneous Wireless Devices, Grainne Foley

Theses

The continuing evolution of wireless networks and services has increased the complexity and diversity of wireless networks and devices, placing significant emphasis on the need for flexible device configuration management. Widely varying wireless technologies currently operate independently worldwide, making global wireless network access for the mobile user confusing and unwieldy. New technologies, network access methodologies and improved services further obscure the evolving environment. The focus of effort for this thesis is the development of a system to automate the distribution and management of software and hardware configurations that enable different levels of wireless device reconfiguration. The scope of investigation will …


Modern Control Techniques For Induction Machines In High-Performance Adjustable-Speed Drives, Pat Cronin Jan 2003

Modern Control Techniques For Induction Machines In High-Performance Adjustable-Speed Drives, Pat Cronin

Theses

Induction Motors (IM’s) are increasingly being considered for and used in high-performance motor drive (HPMD) systems. Their application has only gained acceptance since the 1970’s with the advent of vector control, microprocessors and improvements in power converter technology. D.C. motors were traditionally the preferred choice in HPMD systems. The main reasons for IM acceptance in HPMD systems are ruggedness, durability, low maintenance, cost, and small size by comparison with D.C. motors.

Alternating current asynchronous motors of the IM type are considered to be the universal workhorses of the manufacturing industry. It has been estimated that they are used in seventy …


Design For Signal Integrity In High Frequency, High Density Circuit Boards, Juan Manuel Talavera Martinez Jan 2003

Design For Signal Integrity In High Frequency, High Density Circuit Boards, Juan Manuel Talavera Martinez

Theses

The electronics market is continually seeking fast and small high performance products. The clock frequency in computer systems is often above 2GHz and new generations of laptops have considerably reduced in size. These features make printed circuit board (PCB) design more difficult than in the past.

This thesis is an investigation of the current design of high speed PCB. The complexity of this type of circuit makes the designer needs an extensive knowledge of the techniques used to generate a reliable signalling, in other words, signal integrity. To achieve this objective, the design community has to overcome several problem related …


Performance Evaluation Of Sip Based Services In Umts, Maria Isabel Pous Fenollar Jan 2003

Performance Evaluation Of Sip Based Services In Umts, Maria Isabel Pous Fenollar

Theses

With ever increasing penetration of IP technologies and the tremendous growth in wireless data traffic, the wireless industry is evolving the mobile core networks towards IP technology. The 3rd Generation Partnership Project (3GPP) is specifying an IP Multimedia Core Network Sub-System (IMS) in UMTS Release 5 and Release 6, which is adjunct to the UMTS GPRS core network. This IP-based network will allow mobile operators to provide commonly used Internet applications to wireless user. The UMTS IMS uses the Internet Engineering Task Force (IETF) defined text based Session Initiation Protocol (SIP), to control a wide range of anticipated IP-based services …


Adaptive Baseband Predistortion For Rf Power Amplifier Linearization., Laura Faus-Ferrer Jan 2003

Adaptive Baseband Predistortion For Rf Power Amplifier Linearization., Laura Faus-Ferrer

Theses

In order to make use of spectrally efficient linear modulation methods for mobile communications, it is necessary to linearise the underlying RF power amplifier (PA). A number of techniques for linearizing a PA have been studied, focusing on the Adaptive Baseband Predistortion. The work is centred on the research concentrates on the analysis of different algorithms, their simulation using MatLab, and implementation of a predistorter as a subsystem of a prototype Cartesian based transmitter.

The thesis describes the typical architecture of a transceiver with an emphasis on the nonlinear analysis. Cavers’ algorithm has been examined in terms of its computational …


Multiple Model Control With Intelligent Switching To Ensure Robustness To Process Variations., Peter Cunningham Jan 2003

Multiple Model Control With Intelligent Switching To Ensure Robustness To Process Variations., Peter Cunningham

Theses

One of the most popular approaches for dealing with process that undergo large variations with time, of late, is the multiple model approach. This method has considerable intuitive appeal and has received widespread dissemination in academia. Numerous successful simulations have been reported although few real-time results have been published. The principal contribution of this thesis is the application of the multiple model control scheme in real-time.

A number of practical concepts that enable the use of multiple model control in real-time are discussed. Many of these issues arose when the multiple model control scheme was applied to a laboratory scale …


Hot Carrier Reliability Of Lateral Dmos Transistors In Power Process Applications, Vicky O'Donovan Jan 2003

Hot Carrier Reliability Of Lateral Dmos Transistors In Power Process Applications, Vicky O'Donovan

Theses

The purpose of this study is to investigate and validate the mechanism of hot carrier degradation of the LDMOS device. The LDMOS device is a new technology to Analog Devices, and a relatively new topic to the semiconductor industry, evident from the limited published research in the field. A prerequisite for device release on a product in the market place, is comprehensive hot carrier reliability testing, as hot carrier degradation has evolved as one of the foremost concerns in submicron devices. Both the high voltage and the structural difference of the LDMOS device, from standard MOSFET device, pose a hot …


Tcm Decoding Using Neural Networks, Edit J. Kaminsky, Nikhil Deshpande Jan 2003

Tcm Decoding Using Neural Networks, Edit J. Kaminsky, Nikhil Deshpande

Electrical Engineering Faculty Publications

This paper presents a neural decoder for trellis coded modulation (TCM) schemes. Decoding is performed with Radial Basis Function Networks and Multi-Layer Perceptrons. The neural decoder effectively implements an adaptive Viterbi algorithm for TCM which learns communication channel imperfections. The implementation and performance of the neural decoder for trellis encoded 16-QAM with amplitude imbalance are analyzed.


Dynamically Biased Radio Frequency Power Amplifier, Tom Twomey Jan 2003

Dynamically Biased Radio Frequency Power Amplifier, Tom Twomey

Theses

With the current trend in mobile communications towards more complex modulation schemes to enhance spectral efficiency, the design of RF power amplifiers is the subject of considerable interest and research. The newer more spectrally efficient modulation schemes require a much higher level of linearity due to the non-constant level of their signal envelope. A variable envelope signal would in non-linear amplifiers lead to unacceptable levels of distortion. Linear amplifiers solve this problem at the cost of significant loss of efficiency. With the evolution towards more spectrally efficient modulation schemes, the trade off between linearity and power efficiency has become more …


Design Criteria And Optical Characteristics Of One-Dimensional Photonic Crystals Based On Periodically Grooved Silicon, Vladimir Tolmachev, Tatiana Perova, Kevin Berwick Jan 2003

Design Criteria And Optical Characteristics Of One-Dimensional Photonic Crystals Based On Periodically Grooved Silicon, Vladimir Tolmachev, Tatiana Perova, Kevin Berwick

Articles

Photonic bandgap (PBG) regions have been calculated for periodically grooved Si structures, acting as a one-dimensional photonic crystal. The wavelength range of the PBG as a function of the ratio (DSi/A) is presented, where DSi is the width of the Si walls and A is the grooved silicon lattice constant. The influence of the parameter DSi, the refractive index of the space between the Si walls and the number of structure periods, m, on the forming of PBG regions is discussed. A good correlation between the calculated and the experimentally observed …


Iodat Analysis Content In Cooking Ingredients Using Iodometry And X-Ray Fluorescence Methods., Nelson Saksono Dec 2002

Iodat Analysis Content In Cooking Ingredients Using Iodometry And X-Ray Fluorescence Methods., Nelson Saksono

Makara Journal of Technology

Iodat Analysis Content in Cooking Ingredients Using Iodometry and X-ray Fluorescence Methods. Salt iodization program using iodine fortification into salt method is the best method that is effective and economical to overcome the problems caused by iodine deficiency. However in, its development there are some issues clamed that the use of iodized salt is ineffective since iodine content reduces, even disappear when the salt mix with other cooking ingredients. In order to investigated the existence of iodine in cooking ingredients, a research applying iodometry and X-ray fluorescence methods was carry out. The result obtained by iodometry method showed decreases in …


Emission Gas Reducer On Motor Vehicle, Automobile, Light Engine Of Boat And Stationary Combustion Engine., I Gusti Bagus Wijaya Kusuma Dec 2002

Emission Gas Reducer On Motor Vehicle, Automobile, Light Engine Of Boat And Stationary Combustion Engine., I Gusti Bagus Wijaya Kusuma

Makara Journal of Technology

Emission gas reducer on motor vehicle, automobile, light engine of boat and stationary combustion engine. The use of motor vehicle should be followed by protection against damages on the environment, since the exhaust gas from combustion engine has significantly affect on air and environmental pollution. One method to solve the problems in air pollution has been done by using a re-heater designed in Mechanical Engineering Department, University of Udayana. In accordance to the test on the re-heater, it can be seen very clear that the re-heater has significantly reduce the CO emission of about 54%. It also reduces the CO2 …


Application Of Remote Sensing For Mapping Soil Organic Matter Content, Bangun Muljo Sukojo, Wahono Wahono Dec 2002

Application Of Remote Sensing For Mapping Soil Organic Matter Content, Bangun Muljo Sukojo, Wahono Wahono

Makara Journal of Technology

Application of Remote Sensing for Mapping Soil Organic Matter Content. Information organic content is important in monitoring and managing the environment as well as doing agricultural production activities. This research tried to map soil organic content in Malang using remote sensing technology. The research uses 6 bands of data captured by Landsat TM (Thematic Mapper) satellite (band 1, 2, 3, 4, 5, 7). The research focuses on pixels having Normalized Difference Soil Index (NDSI) more than 0.3. Ground-truth data were collected by analysing organic content of soil samples using Black-Walkey method. The result of analysis shows that digital number of …


Optimation Model Of Planning Investment Dockyard With Approach Multi Objective Goal Programming, Ali Azhar Dec 2002

Optimation Model Of Planning Investment Dockyard With Approach Multi Objective Goal Programming, Ali Azhar

Makara Journal of Technology

Optimation model of planning investment dockyard with approach multi objective goal programming. The purpose of this research is to determine decision variable, goal function, alternative priority and achievement function in investment planning. From this optimation component, the model of ship yard investment planning could be achieved. The model of developed model in this research was the optimation of ship yard investment planning using multi objective goal programming approach. The model consist of 5 decision variable, 11 goal function, 2 alternative priority and 11 achievement functions. The model implementation was done toward PT ASSI investment planning. The calculation using from Quantitative …


Self-Ignition Properties Of Peat, Palm Shell Fibre And Woods, Yulianto Sulistyo Nugroho Dec 2002

Self-Ignition Properties Of Peat, Palm Shell Fibre And Woods, Yulianto Sulistyo Nugroho

Makara Journal of Technology

Self-ignition properties of peat, palm shell fibre and woods. Forest fire is one of the greatest environmental problems faced by Indonesia. Forest fires have destroyed million hectares of forest and land which cause economic loss, social problems including smoke related diseases and environmental disaster with long time consequences. The exothermic reactions of forest fuels that lead to fire can be initiated by a piloted flame and low-temperature oxidation mechanism. This paper presents the results of low temperature oxidation studies using forests fuel samples i.e. palm shell fibre, peat, woods and low-rank coal. The measured values of the critical oven temperatures …


The Use Of 2d Plastic Grating For Surface Profile And Dimension Manufacture Product Measurements By Using Ndt Moiré Technique, Retno Wigajatri P., Dini Andiani Dec 2002

The Use Of 2d Plastic Grating For Surface Profile And Dimension Manufacture Product Measurements By Using Ndt Moiré Technique, Retno Wigajatri P., Dini Andiani

Makara Journal of Technology

The Use of 2D Plastic Grating for Surface Profile and Dimension Manufacture Product Measurements by Using NDT Moiré Technique. Research of measuring the shape and dimension of object using the moiré technique have been done. Measurement have been made by observing the moiré space as a result of interaction between grating and its shadow casted on the object’s surface caused by the projector lamp with CCD camera. The acquired data was further processed by way of off-line. By successive phase shifts that is π/2, π dan 3π/2 towards the table tennis ball at the distance of 48 cm from the …


Phase-Sensitive Detection Electronics For Wavelength Modulation Spectroscopy Experiments, Tyrone Pate Oct 2002

Phase-Sensitive Detection Electronics For Wavelength Modulation Spectroscopy Experiments, Tyrone Pate

Electrical & Computer Engineering Theses & Dissertations

Wavelength modulation spectroscopy (WMS) is a non-intrusive detection technique, which enables the measurement of several parameters such as pressure, concentration, and temperature of a species of interest by analyzing the latter's absorption lineshape profile. The method employs a synchronous modulation and detection apparatus to increase the signal to noise ratio and hence the sensitivity of the measurement. Phase-sensitive detection and demodulation of the signal is performed at the modulation frequency and its harmonics. Research at ODU demonstrates that each particular measurement can be performed optimally at an appropriate harmonic of the modulation frequency. The most suitable harmonic depends on many …


Adaptive Ds-Cdma Multiuser Detection For Time Variant Frequency Selective Rayleigh Fading Channel, Xin Tang Aug 2002

Adaptive Ds-Cdma Multiuser Detection For Time Variant Frequency Selective Rayleigh Fading Channel, Xin Tang

Dissertations

The current digital wireless mobile system such as IS-95, which is based on direct sequence Code Division Multiple Access (DS-CDMA) technology, will not be able to meet the growing demands for multimedia service due to low information exchanging rate. Its capacity is also limited by multiple accessed interference (MAI) signals.

This work focuses on the development of adaptive algorithms for multiuser detection (MUD) and interference suppression for wideband direct sequence code division multiple access (DS-CDMA) systems over time-variant frequency selective fading channels. In addition, channel acquisition and delay estimation techniques are developed to combat the uncertainty introduced by the wireless …


Multicast Outing Protocols And Architectures In Mobile Ad-Hoc Wireless Networks, Beongku An Aug 2002

Multicast Outing Protocols And Architectures In Mobile Ad-Hoc Wireless Networks, Beongku An

Dissertations

The basic philosophy of personal communication services is to provide user-to-user, location independent communication services. The emerging group communication wireless applications, such as multipoint data dissemination and multiparty conferencing tools have made the design and development of efficient multicast techniques in mobile ad-hoc networking environments a necessity and not just a desire. Multicast protocols in mobile adhoc networks have been an area of active research for the past few years.

In this dissertation, protocols and architectures for supporting multicast services are proposed, analyzed and evaluated in mobile ad-hoc wireless networks. In the first chapter, the activities and recent advances are …


Em-Based Iterative Channel Estimation And Sequence Detection For Space-Time Coded Modulation, Zbigniew Baranski Aug 2002

Em-Based Iterative Channel Estimation And Sequence Detection For Space-Time Coded Modulation, Zbigniew Baranski

Dissertations

Reliable detection of signals transmitted over a wireless communication channel requires knowledge of the channel estimate. In this work, the application of expectationmaximization (EM) algorithm to estimation of unknown channel and detection of space-time coded modulation (STCM) signals is investigated. An STCM communication system is presented which includes symbol interleaving at the transmitter and iterative EM-based soft-output decoding at the receiver. The channel and signal model are introduced with a quasi-static and time-varying Rayleigh fading channels considered to evaluate the performance of the communication system. Performance of the system employing Kalman filter with per-survivor processing to do the channel estimation …


On Chip Implement Of Deadlock Avoidance In Wormhole Networks, Kiran K. Gururaj Aug 2002

On Chip Implement Of Deadlock Avoidance In Wormhole Networks, Kiran K. Gururaj

Theses

This thesis gives a detailed description of the Application Specific Integrated Circuit (ASIC) design to avoid deadlocks in Wormhole Networks. Deadlock avoidance is the most critical issue while considering wormhole networks and should be avoided by any routing protocol and algorithm. A novel architecture for the Turn Prohibition Based Routing (TPBR) protocol has been proved to be efficient and was developed as a part of this work. This architecture for implementing the algorithm is divided into three parts. The first part determines the order of selccuon of the nodes, in the network to run the algorithm. The second part deals …


The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: I. Swamp Water, Sulistyoweni Widanarko, Henki W. Ashadi, Andri Krisnadi Wicaksono Aug 2002

The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: I. Swamp Water, Sulistyoweni Widanarko, Henki W. Ashadi, Andri Krisnadi Wicaksono

Makara Journal of Technology

Most of infrastructures using steel concrete to reinforce the strength of concrete. Steel concrete is so vulnerable to chemical compounds that can cause corrosion. It can happen due to the presence of chemical compounds in acid environment in low pH level. These chemical compounds are SO4 2-, Cl-, NO3 -. There are many swamp area in Indonesia. The acid contents and the concentration of ion sulphate, chlorides, and nitrate are higher in the swamp water than in the ground water .The objective of this research was to find out the influence of corrosive chemicals in the swamp water to the …


The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: Ii. Swamp Sludges, Henki W. Ashadi, Sulistyoweni Widanarko, Irma Gusniani Aug 2002

The Effects Of Corrosive Chemicals On Corrosion Rate Of Steel Reinforcement Bars: Ii. Swamp Sludges, Henki W. Ashadi, Sulistyoweni Widanarko, Irma Gusniani

Makara Journal of Technology

A polluted environment will influence the building age. The objective of this research was to find out the influence of corrosive chemicals within the sludge swamp area with the corrosion rate of steel concrete. Corrosion in steel concrete usually occur in acid area which contain of SO4 2-, Cl- and NO3 -. The research treatment used by emerging ST 37 and ST 60 within 60 days in ‘polluted’ sludge swamp area. Three variation of ‘polluted’ swamp sludge were made by increasing the concentration a corrosive unsure up to 1X, 5X and 10X. The corrosion rate measured by using an Immersion …