Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Electrical and Electronics

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 3841 - 3870 of 5697

Full-Text Articles in Engineering

Raman Scattering In Free Standing Porous Si Films, Thenappan Chidambaram May 2008

Raman Scattering In Free Standing Porous Si Films, Thenappan Chidambaram

Theses

In this thesis, Raman Scattering of free standing porous silicon on sapphire samples of controllably varying porosity is studied. The free standing, fully crystalline porous silicon films were prepared by electrochemical etching and the porous structure were lifted-off by a procedure based on electro-polishing. During Raman scattering measurements, the samples are exposed to relatively high intensity laser radiation. Free-standing porous Si sample temperature and thermal conductivity are calculated by comparing intensities of Stokes and anti-Stokes Raman peaks. Compared to crystalline Si, we find strong decrease in thermal conductivity accompanied by a change in the phonon spectra. Also, comparing Stokes and …


Synthesis And Analysis Of Carbon Nanowalls And Their Raman Spectroscopy, Amit Mahajan May 2008

Synthesis And Analysis Of Carbon Nanowalls And Their Raman Spectroscopy, Amit Mahajan

Theses

Growth of Carbon Nanowalls has been carried out by Radio Frequency Chemical Vapor Deposition (RF-PECVD) on various substrates. Hydrogen was used as an active gas for the growth where as Ethanol bubbled with Argon was used as carbon source for formation of Carbon Nanowalls (CNW). The growth was then confinned by Raman Spectroscopy and Scanning Electron Microscope (SEM) images. Also the need of using catalyst in CNW has been analyzed. The intensities of D and G bands obtained from Raman spectrum have been related to the length of Graphene walls, to study the CNW's length on different substrates.

The growth …


Measurement Of Absolute Argon Excited State Populations And Electron Energy Distribution Functions In An Ar-A-Si Plasma, Katherine Herring May 2008

Measurement Of Absolute Argon Excited State Populations And Electron Energy Distribution Functions In An Ar-A-Si Plasma, Katherine Herring

Electrical Engineering Undergraduate Honors Theses

Deposition systems utilizing plasma are used for a variety of tasks, including tool coatings and creating thin-film materials. In order to have repeatable results, the internal conditions of a plasma chamber need to be known. This project centered on the use of data from optical emissions and a Langmuir probe from an argon plasma amorphous silicon depositing system. An electron energy distribution function (EEDF) was obtained from manipulation of the Langmuir probe data. This EEDF was then input to an argon collisional-radiative model (CRM) to obtain the electron population of the 4p level of the argon plasma. Through an absolute …


A Timer Module For An 8051 Microcontroller, Troy England May 2008

A Timer Module For An 8051 Microcontroller, Troy England

Electrical Engineering Undergraduate Honors Theses

A timer module for an 8051 Microcontroller is designed from the ground up. It could potentially be integrated into a larger 8051 for use in lunar and Martian missions. It follows through a synchronous digital design flow from HDL code through layout verification. The timer shows functionality at 100MHz with some minor glitches.


A Review Of Variable Valve Timing Devices, Paul Shelton May 2008

A Review Of Variable Valve Timing Devices, Paul Shelton

Mechanical Engineering Undergraduate Honors Theses

Variable valve timing (VVT) has evolved from simple, manual controlled engine management to automatic, electronic works of engineering. Starting from the need for more power and extending into fuel efficiency and low emissions, VVT has evolved from the constant changing of needs. This paper summarizes various devices used to control the timing of valves from the early 1920s up until 2007.


A Ladar-Based Pose Estimation Algorithm For Determining Relative Motion Of A Spacecraft For Autonomous Rendezvous And Dock, Ronald Christopher Fenton May 2008

A Ladar-Based Pose Estimation Algorithm For Determining Relative Motion Of A Spacecraft For Autonomous Rendezvous And Dock, Ronald Christopher Fenton

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Future autonomous space missions will require autonomous rendezvous and docking operations. The servicing spacecraft must be able to determine the relative 6 degree-of-freedom (6 DOF) motion between the vehicle and the target spacecraft. One method to determine the relative 6 DOF position and attitude is with 3D ladar imaging. Ladar sensor systems can capture close-proximity range images of the target spacecraft, producing 3D point cloud data sets. These sequentially collected point-cloud data sets were then registered with one another using a point correspondence-less variant of the Iterative Closest Points (ICP) algorithm to determine the relative 6 DOF displacements. Simulation experiments …


A Field Programmable Gate Array Based Finite-Domain Constraint Solver, Prasad Subramanian May 2008

A Field Programmable Gate Array Based Finite-Domain Constraint Solver, Prasad Subramanian

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Constraint satisfaction and optimization techniques are commonly employed in scheduling, industrial manufacturing, and automation processes where concepts from Operations Research (OR) and Artificial Intelligence (AI) are applied. In embedded systems, Constraint Satisfaction Problem (CSP) finds use in design, synthesis, and optimization. However, most application areas of CSP employ offline solving techniques where design requirements and constraints are captured before the system is deployed online. There is a significant amount of pre-planning and human intervention required.

In embedded systems, online constraint solving techniques are primarily used as onboard control software in order to enable a system that can dynamically adapt to …


Algorithm Development Of The Aglite-Lidar Instrument, Christian Marchant May 2008

Algorithm Development Of The Aglite-Lidar Instrument, Christian Marchant

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Particulate emissions from agricultural operations are increasingly receiving attention from regulatory bodies as a potential source of air pollution. The Space Dynamics Laboratory (SDL) has developed the Aglite system, a suite of instruments including a lidar that is capable of measuring particulate emission levels from agricultural facilities. This system provides a novel method of measuring particulate mass (PM) pollution, allowing measurements to be taken of diverse types of facilities with high temporal and spatial resolution. This high resolution allows for the measurement of emission levels generated by specific activities, fostering the development and determination of best management practices.

The Aglite …


Algorithm Development For Column Water Vapor Retrieval Using The Sun And Aureole Measurement (Sam) Sensor, Joshua Bruce Williams May 2008

Algorithm Development For Column Water Vapor Retrieval Using The Sun And Aureole Measurement (Sam) Sensor, Joshua Bruce Williams

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

To understand and model the energetics of the Sun-Earth connection, measurements of specific atmospheric molecules are beneficial. The objective is to formulate an algorithm to derive temporally varying atmospheric water vapor concentrations as functions of altitude, latitude, and longitude from solar irradiance absorption measurements. The Visidyne SAM (Sun and Aureole Measurement) instrument, which studies the size and distribution of cloud particles, was used to obtain the experimental data. By introducing a spectrometer to the SAM instrument, column water vapor is produced as part of the data product. A new model optimized algorithm is developed and tested versus existing algorithms. Through …


Real-Time Plasma Controlled Chemistry In A Two-Frequency, Confined Plasma Etcher, Vladimir Milosavljevic, Albert R. Ellingboe, Cezar Gaman, John V. Ringwood Apr 2008

Real-Time Plasma Controlled Chemistry In A Two-Frequency, Confined Plasma Etcher, Vladimir Milosavljevic, Albert R. Ellingboe, Cezar Gaman, John V. Ringwood

Articles

The physics issues of developing model-based control of plasma etching are presented. A novel methodology for incorporating real-time model-based control of plasma processing systems is developed. The methodology is developed for control of two dependent variables (ion flux and chemical densities) by two independent controls (27 MHz power and O2flow). A phenomenological physics model of the nonlinear coupling between the independent controls and the dependent variables of the plasma is presented. By using a design of experiment, the functional dependencies of the response surface are determined. In conjunction with the physical model, the dependencies are used to deconvolve the sensor …


Modeling And Characterization Of Adaptive Lanthanum-Modified Lead Zirconate Titanate (Plzt) Microlenses, Yasser A. Abdelaziez, Partha P. Banerjee Apr 2008

Modeling And Characterization Of Adaptive Lanthanum-Modified Lead Zirconate Titanate (Plzt) Microlenses, Yasser A. Abdelaziez, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

We report the modeling and characterization of adaptive voltage controlled electro-optic microlenses. First, we utilize finite element analysis (FEA) to simulate the induced electro-optic effect in lanthanum-modified lead zirconate titanate (PLZT). FEA simulation provides microlens parameters such as phase and focal length. A simple z-scan method is developed to fully characterize the adaptive voltage controlled linear lens. Experimental z-scan results are shown to match the theoretical predictions from FEA.


A Study Of Co2 Absorption Using Jet Bubble Column, Setiadi Setiadi, Nita Tania Hadiyani, Hantizen Hantizen, Dijan Supramono Apr 2008

A Study Of Co2 Absorption Using Jet Bubble Column, Setiadi Setiadi, Nita Tania Hadiyani, Hantizen Hantizen, Dijan Supramono

Makara Journal of Technology

A Study of CO2 Absorption Using Jet Bubble Column. The phenomenon of plunging jet gas-liquid contact occurs quite often in nature, it's momentum carries small air bubbles with it into the reactor medium. The momentum of the liquid stream can be sufficient to carry small bubbles completely to the bottom of the vessel. A stream of liquid falling toward a level surface of that liquid will pull the surrounding air along with it. It will indent the surface of the liquid to form a trumpet-like shape. If the velocity of the stream is high enough, air bubbles will be pulled …


The Development Of Inverter Fuzzy Logic Control For Induction Motor Control By Vector Control Method In Electric Vehicle, Era Purwanto, Mohammad Ashary, Subagio Subagio, Mauridhi Heri Purnomo Apr 2008

The Development Of Inverter Fuzzy Logic Control For Induction Motor Control By Vector Control Method In Electric Vehicle, Era Purwanto, Mohammad Ashary, Subagio Subagio, Mauridhi Heri Purnomo

Makara Journal of Technology

The development of Inverter Fuzzy Logic Control for Induction Motor Control by Vector Control Method in Electric Vehicle. In response to concerns about energy cost, energy dependence, and environmental damage, a rekindling of interest in electric vehicles (EV’s) has been obvious. Thus, the development of power electronics technology for EV’s will take an accelerated pace to fulfill the market needs, regarding with the problem in this paper is presented development of fuzzy logic inverter in induction motor control for electric vehicle propulsion. The Fuzzy logic inverter is developed in this system to directed toward developing an improved propulsion system for …


Internet Congestion Control System, Pranoto Hidaya Rusmin, Carmadi Machbub, Agung Harsoyo, Hendrawan Hendrawan Apr 2008

Internet Congestion Control System, Pranoto Hidaya Rusmin, Carmadi Machbub, Agung Harsoyo, Hendrawan Hendrawan

Makara Journal of Technology

Internet Congestion Control System. Internet congestion occurs when resource demands exceeds the network capacity. But, it is not the only reason. Congestion can happen on some users because some others user has higher sending rate. Then some users with lower sending rate will experience congestion. This partial congestion is caused by inexactly feedback. At this moment congestion are solved by the involvement of two controlling mechanisms. These mechanisms are flow/congestion control in the TCP source and Active Queue Management (AQM) in the router. AQM will provide feedback to the source a kind of indication for the occurrence of the congestion …


Substrates Preparation From Woody Tropical Waste Biomass For Biohydrogen Production, Dwi Susilaningsih, Theresia Umi Harwati, Khairul Anam, Yopi Yopi Apr 2008

Substrates Preparation From Woody Tropical Waste Biomass For Biohydrogen Production, Dwi Susilaningsih, Theresia Umi Harwati, Khairul Anam, Yopi Yopi

Makara Journal of Technology

Substrates Preparation from Woody Tropical Waste Biomass for Biohydrogen Production. Addressing to the global warming problem, energy crisis and pollution, hydrogen production by micro-organisms using biotechnological approach should be considered, since it fulfils the recent society requirement to safely produce, renewable and environmental friendly energy. Hydrogen is one of the most promising green energy sources, because it is easily converted to electricity and cleanly combustible. There are three types of micro-organisms for hydrogen production, the first is cyanobacteria through the photosynthesis process, the second is anaerobic bacteria, which use organic substances as electron donor and energy and convert them to …


Building Fire Safety Audit At Faculty X, University Of Indonesia, Year 2006, Fatma Lestari, Rm. Yodan Amaral Panindrus Apr 2008

Building Fire Safety Audit At Faculty X, University Of Indonesia, Year 2006, Fatma Lestari, Rm. Yodan Amaral Panindrus

Makara Journal of Technology

Building Fire Safety Audit at Faculty X, University of Indonesia, Year 2006. Fire may cause loss of life, material and valuable assets. The objective of this study is to conduct audit for fire safety and emergency response in the building at Faculty X, University of Indonesia, Depok. The audit results on the building fire safety facilities including emergency response and preparedness are then compared to the Building Code Australia (BCA) and Indonesian regulation on the building fire safety (Kep.MenPU.No 10 and 11/KPTS/2000). The building selected are Building A, B, C, D, F and G. Building classification for A, B, D, …


Ad Hoc On-Demand Distance Vector (Aodv) Routing Protocol Performance Evaluation On Hybrid Ad Hoc Network: Comparison Of Result Of Ns-2 Simulation And Implementation On Testbed Using Pda, Riri Fitri Sari, Abdusy Syarif, Bagio Budiardjo Apr 2008

Ad Hoc On-Demand Distance Vector (Aodv) Routing Protocol Performance Evaluation On Hybrid Ad Hoc Network: Comparison Of Result Of Ns-2 Simulation And Implementation On Testbed Using Pda, Riri Fitri Sari, Abdusy Syarif, Bagio Budiardjo

Makara Journal of Technology

Ad Hoc on-Demand Distance Vector (AODV) Routing Protocol Performance Evaluation on Hybrid Ad Hoc Network: Comparison of Result of Ns-2 Simulation and Implementation on Testbed using PDA. In Mobile Ad hoc NETwork (MANET), node supplemented with wireless equipment has the capacity to manage and organise autonomously, without the presence of network infrastructures. Hybrid ad hoc network, enable several nodes to move freely (mobile) to create instant communication. Independent from infrastructure. They could access the Local Area Network (LAN) or the Internet. Functionalities of ad hoc network very much dependent on the routing protocol that determines the routing around node. Ad …


Biomass Production Chlorella Vulgaris Buitenzorg Using Series Of Bubble Column Photo Bioreactor With A Periodic Illumination, Anondho Wijanarko, Dianursanti Dianursanti, Muryanto Muryanto, Josia Simanjuntak, Praswasti Pembangun Dyah Kencana Wulan, Heri Hermansyah, Misri Gozan, Roekmijati Widaningroem Soemantojo Apr 2008

Biomass Production Chlorella Vulgaris Buitenzorg Using Series Of Bubble Column Photo Bioreactor With A Periodic Illumination, Anondho Wijanarko, Dianursanti Dianursanti, Muryanto Muryanto, Josia Simanjuntak, Praswasti Pembangun Dyah Kencana Wulan, Heri Hermansyah, Misri Gozan, Roekmijati Widaningroem Soemantojo

Makara Journal of Technology

Chlorella vulgaris Buitenzorg cultivation using three bubble column photo bioreactors arranged in series with a volume of 200 mL for 130 hours shows an increase of biomass production of Chlorella vulgaris Buitenzorg up to 1.20 times and a decrease of the ability of CO2 fixation compared to single reactor at a periodic sun illumination cycle. The operation conditions on cultivation are as following: T, 29.0oC; P,1 atm.; UG, 2.40 m/h; CO2, 10%; Benneck medium; and illumination source by Phillip Halogen Lamp 20W /12V/ 50Hz. Other research parameters such as microbial carbon dioxide transferred rate (qco2), CO2 transferred rate (CTR), energy …


The Effect Of Ozone And Zeolite Concentration To The Performance Of The Treatment Of Wastewater Containing Heavy Metal Using Flotation Process, Eva Fathul Karamah, Setijo Bismo, Hotdi M. Simbolon Apr 2008

The Effect Of Ozone And Zeolite Concentration To The Performance Of The Treatment Of Wastewater Containing Heavy Metal Using Flotation Process, Eva Fathul Karamah, Setijo Bismo, Hotdi M. Simbolon

Makara Journal of Technology

The Effect of Ozone and Zeolite Concentration to the Performance of the Treatment of Wastewater Containing Heavy Metal Using Flotation Process. Industrial wastewater which contains heavy metal cannot be disposed to the environment directly, due to its toxicity. In this research, separation of metal from wastewater was conducted by sorptive flotation method, using Lampung natural zeolite as bonding agent. The most common diffuser used in the flotation process is air or oxygen. In this research, ozone is used as diffuser because it is a stronger oxidant and more dissolvable in water than oxygen. Besides, ozone is a coagulant aid and …


The Role Of 1 And 9 Wt.% Zn In Precipitation Hardening Of Aa319 Aluminium, Bondan Tiara Sofyan, Sari Susanti, Ridwan R. Yusfranto Apr 2008

The Role Of 1 And 9 Wt.% Zn In Precipitation Hardening Of Aa319 Aluminium, Bondan Tiara Sofyan, Sari Susanti, Ridwan R. Yusfranto

Makara Journal of Technology

The Role of 1 and 9 wt.% Zn in Precipitation Hardening of AA319 Aluminium. Aluminium alloys are widely used for automotive application due to its low density and high corrosion resistance. For economic reason, casting of automotive products always uses aluminium scrap as charging materials that may result in fluctuation of content of alloying element, such as Zn. This research studies the role of Zn in precipitation hardening of AA319 aluminium alloys. Hardness and tensile testing were conducted to study the mechanical properties of the alloys, while ageing response was followed by hardness measurements. Evolution of microstructures was observed by …


Applying Frequency-Domain Equalization To Code-Division Multiple Access And Transform-Domain Communications Systems, Alfred A. Tamayo Iii Mar 2008

Applying Frequency-Domain Equalization To Code-Division Multiple Access And Transform-Domain Communications Systems, Alfred A. Tamayo Iii

Theses and Dissertations

This research examined the theory and application of using orthogonal frequency division multiplexing (OFDM), or discrete multi-tone (DMT), frequency domain equalization (FEQ) with two communications systems that inherently possess unused carrier frequencies, or null-tones, in their respective transmission frequencies. The fundamental DMT-FEQ property relies on null-tones to equalize a non-ideal channel and mitigate the effects of interchannel interference (ICI), intersymbol interference (ISI), and noise. The two communications systems investigated were a Hadamard encoded code division multiple access (CDMA) communications system with up to 32 synchronous users and a transform domain communications system (TDCS) with only one user. Both communications systems …


Reflection Coefficients Of P- And S-Polarized Light By A Quarter-Wave Layer: Explicit Expressions And Application To Beam Splitters, R. M.A. Azzam, F. F. Sudradjat Mar 2008

Reflection Coefficients Of P- And S-Polarized Light By A Quarter-Wave Layer: Explicit Expressions And Application To Beam Splitters, R. M.A. Azzam, F. F. Sudradjat

Electrical Engineering Faculty Publications

The complex-amplitude reflection coefficients of p- and s-polarized light by a transparent freestanding, embedded, or deposited quarter-wave layer (QWL) are derived as explicit functions of the angle of incidence and layer refractive index. This provides the basis for the design of 50%-50% beam splitters for incident s-polarized or unpolarized light that use a high-index (e.g., TiO2 or Ge) QWL embedded in a glass cube in the visible and near infrared spectral range. These simple devices have good angular and spectral response and are insensitive to small film thickness errors to the first order.


Increasing Combat Aircraft Survivability Through Coherent Self-Protection Jammers, Soner Ozer Mar 2008

Increasing Combat Aircraft Survivability Through Coherent Self-Protection Jammers, Soner Ozer

Theses and Dissertations

When the battlefields were within the visual range, the objective of deception tactics in warfare was to deceive the human senses. In the battlefield of electromagnetic spectrum, the objective of deception is to deceive the sensors of the enemy weapon systems. The survivability of the aircraft operating in hostile environment is of prime importance to the mission planner. If the aircraft can deny its location information to the tracking radar of the radar guided threat missile system, this, in return, may increase its survivability. The deception, a tactic which stems from the wisdom of ancient battles, incarnated in the form …


Efficiency Of Linear-To-Circular Polarization Conversion For Light Reflection At The Principal Angle By A Dielectric-Conductor Interface, R. M.A. Azzam, A. Alsamman Mar 2008

Efficiency Of Linear-To-Circular Polarization Conversion For Light Reflection At The Principal Angle By A Dielectric-Conductor Interface, R. M.A. Azzam, A. Alsamman

Electrical Engineering Faculty Publications

The efficiency ηLC of linear-to-circular polarization conversion when light is reflected at a dielectric–conductor interface is determined as a function of the principal angle ϕ¯ and principal azimuth ψ¯ . Constant- ηLC contours are presented in the ϕ¯ ,ψ¯ plane for values of ηLC from 0.5 to 1.0 in steps of 0.05, and the corresponding contours in the complex plane of the relative dielectric function ϵ are also determined. As specific examples, efficiencies ⩾88% are obtained for light reflection by a Ag mirror in the visible and near-IR (400–1200nm) spectral range, and ≥40% for the reflection of extreme ultraviolet (EUV) …


Anti-Tamper Method For Field Programmable Gate Arrays Through Dynamic Reconfiguration And Decoy Circuits, Samuel J. Stone Mar 2008

Anti-Tamper Method For Field Programmable Gate Arrays Through Dynamic Reconfiguration And Decoy Circuits, Samuel J. Stone

Theses and Dissertations

As Field Programmable Gate Arrays (FPGAs) become more widely used, security concerns have been raised regarding FPGA use for cryptographic, sensitive, or proprietary data. Storing or implementing proprietary code and designs on FPGAs could result in the compromise of sensitive information if the FPGA device was physically relinquished or remotely accessible to adversaries seeking to obtain the information. Although multiple defensive measures have been implemented (and overcome), the possibility exists to create a secure design through the implementation of polymorphic Dynamically Reconfigurable FPGA (DRFPGA) circuits. Using polymorphic DRFPGAs removes the static attributes from their design; thus, substantially increasing the difficulty …


Improvement Of Ecm Techniques Through Implementation Of A Genetic Algorithm, James D. Townsend Mar 2008

Improvement Of Ecm Techniques Through Implementation Of A Genetic Algorithm, James D. Townsend

Theses and Dissertations

This research effective effort develops the necessary interfaces between the radar signal processing components and an optimization routine, such as genetic algorithms, to develop Electronic Countermeasure (ECM) waveforms under a Hardware-in-the-Loop (HILS) architecture. The various ECM waveforms are stored in an ECM library, where an operator selects the desired function to use against a particular system. This optimization works with modular components, compared to previous research that embedded a genetic algorithm into the Range Gate Pull-off (RGPO) waveform optimization loop, which can be interchanged based upon the operator's desired hardware/ software testing setup. The ECM library's first entries contain the …


Tailoring Metallodielectric Structures For Superresolution And Superguiding Applications In The Visible And Near-Ir Ranges, Domenico De Ceglia, Maria Antonietta Vincenti, M. G. Cappeddu, Marco Centini, Neset Akozbek, Antonella D'Orazio, Joseph W. Haus, Mark J. Bloemer, Michael Scalora Mar 2008

Tailoring Metallodielectric Structures For Superresolution And Superguiding Applications In The Visible And Near-Ir Ranges, Domenico De Ceglia, Maria Antonietta Vincenti, M. G. Cappeddu, Marco Centini, Neset Akozbek, Antonella D'Orazio, Joseph W. Haus, Mark J. Bloemer, Michael Scalora

Electrical and Computer Engineering Faculty Publications

We discuss propagation effects in realistic, transparent, metallodielectric photonic band gap structures in the context of negative refraction and super-resolution in the visible and near infrared ranges. In the resonance tunneling regime, we find that for transverse-magnetic incident polarization, field localization effects contribute to a waveguiding phenomenon that makes it possible for the light to remain confined within a small fraction of a wavelength, without any transverse boundaries, due to the suppression of diffraction. This effect is related to negative refraction of the Poynting vector inside each metal layer, balanced by normal refraction inside the adjacent dielectric layer: The degree …


Characterization And Implementation Of A Real-World Target Tracking Algorithm On Field Programmable Gate Arrays With Kalman Filter Test Case, Benjamin D. Hancey Mar 2008

Characterization And Implementation Of A Real-World Target Tracking Algorithm On Field Programmable Gate Arrays With Kalman Filter Test Case, Benjamin D. Hancey

Theses and Dissertations

A one dimensional Kalman Filter algorithm provided in Matlab is used as the basis for a Very High Speed Integrated Circuit Hardware Description Language (VHDL) model. The JAVA programming language is used to create the VHDL code that describes the Kalman filter in hardware which allows for maximum flexibility. A one-dimensional behavioral model of the Kalman Filter is described, as well as a one-dimensional and synthesizable register transfer level (RTL) model with optimizations for speed, area, and power. These optimizations are achieved by a focus on parallelization as well as careful Kalman filter sub-module algorithm selection. Newton-Raphson reciprocal is the …


Digital Fingerprinting Of Field Programmable Gate Arrays, James W. Crouch Mar 2008

Digital Fingerprinting Of Field Programmable Gate Arrays, James W. Crouch

Theses and Dissertations

Commercial off-the-shelf (COTS) component usage is becoming more prevalent in military applications due to current Department of Defense (DoD) policies. The easy accessibility of COTS will give reverse engineers a higher probability of successfully tampering, coping, or reverse engineering circuits that contain critical capabilities. To prevent this and verify the trustworthiness of hardware, circuit identification tags or serials numbers can be used. However, these values can be easily obtained and forged. To protect critical DoD technologies from possible exploitation, there is an urgent need for a reliable method to confirm a circuit’s identity using a set of unique unforgettable metrics. …


Design And Optimization Of Broadband High Impedance Ground Planes (Higp) For Surface Mount Antennas, Murat Dogrul Mar 2008

Design And Optimization Of Broadband High Impedance Ground Planes (Higp) For Surface Mount Antennas, Murat Dogrul

Theses and Dissertations

Gain and bandwidth metrics of broad-band low-profile antennas severely deteriorate when they are placed conformally onto the conductive skins of air, sea, and ground platforms. This detrimental effect is primarily due to out-of-phase reflections from the conductive body interfering with the antenna’s self radiation. Furthermore, lateral waves launched by the antenna couple into the thin substrate placed between the antenna and the platform, giving rise to surface waves resulting in significant diffraction from the edges of the substrate. To remedy these two major mechanisms degrading antenna performance, high impedance ground planes (HIGP) were designed. HIGPs made of a 2-dimensional periodic …