Engineering Commons^™

Books And Our Human Stories, Paul H. Benson

Philosophy Faculty Publications

An essay on the impact of the works in the Imprints and Impressions: Milestones in Human Progress, an exhibition of rare books from the collection of Stuart Rose. Exhibition was held Sept. 29-Nov. 9, 2014, at the University of Dayton.

Nebraska Summary: S948 New Holland T4.115, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S944 Case-Ih Farmall 115c, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S943 Case-Ih Farmall 105c, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S942 Case-Ih Farmall 95c, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2098:John Deere 8245r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2095: Case Ih Steiger 500, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2094: Case Ih Steiger 470, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2092a: New Holland T9.435, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2090: John Deere 7230r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2085: John Deere 7250r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2084: John Deere 7270r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2083: John Deere 7290r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Making Design Pedagogical Content Knowledge Visible Within Design Reviews, Robin Adams, David Radcliffe, Tiago Forin, Mel Chua

Design Thinking Research Symposium

Design pedagogical content knowledge (PCK) is the content-specific specialized teacher knowledge that connects the how (pedagogical knowledge) and what (content knowledge) of teaching design. In this study, we make visible the design PCK in three student design reviews: choreography, undergraduate industrial design, and mechanical engineering. We use cognitive apprenticeship and teaching-as-improvisation frameworks to characterize PK, and design judgment, design task strategies, and process management strategies to characterize CK. We identify and describe four patterns of design PCK: scaffolded articulation, driving for meaning and guidance, breaking the 4^th wall to create a teaching moment, and “suggest don’t tell”. Theoretical implications …

Higher Order Thinking In Design Reviews, Craig D. Howard, Colin M. Gray

Design Thinking Research Symposium

In this study we have grappled with how higher order thinking emerges in early stage design reviews, using an undergraduate dyadic review and a graduate review in a small group setting. Narratives, gambits and justifications emerged through a content analysis as forms of higher order thinking common in the reviews. We then mapped these reviews onto common frames of reference employed by teachers and students. Results depicted stark differences in the linguistic routines of the two teachers and two different sets of students. Each focused their higher order thinking from a primarily different frame of reference. Conclusions relate to opportunistic …

Describing Creativity In Design Across Disciplines, Llew Mann, Yasemin Tekmen Araci

Design Thinking Research Symposium

Creativity is an essential aspect of design thinking. Being able to describe creativity and creative processes is important for developing future designers. While much research has been undertaken describing creativity in design, there is very little investigating how creativity and creative thinking varies across disciplines. A coding scheme involving six separate codes was developed initially from the literature, refined and then used to describe how creativity and creative thinking was apparent in the DTRS 10 datasets of Junior Industrial Design, Graduate Industrial Design, Mechanical Engineering, Choreography and Entrepreneurship. Based on this analysis, conclusions on how creativity and creative thinking varied …

Integrating Technology And Engineering In A Stem Context, Barry N. Burke, Philip A. Reed, John G. Wells, Robert E. Yager (Ed.), Herbert Brunkhorst (Ed.)

STEMPS Faculty Publications

(First paragraph) Imagine students entering the classroom with an enthusiasm that cannot be contained. They come from all walks of life and with different experiences and backgrounds and are eager to engage in learning. Inspiration and innovation are on their mind. What they learned in their science and math classes is now being applied in another class they take called Technology and Engineering. Opportunity is what they see for their future. Something about connecting all the dots from all their classes propels them to change their outlook, to get involved, to get excited about school and to envision their future.

A Collaborated Process With A Wireless Autonomous Vehicle At It's Center, Thomas B. Stout, Steve C. Hsiung

Engineering Technology Faculty Publications

Developing partnerships between high schools, community colleges and universities is critical for the successful transitions to a lifelong STEM careers. How do you develop these partnerships? The sharing of a technology platform such as autonomous vehicles can bridge the gap by using a common core group of materials. Collaborations between teachers and faculty indifferent schools that share common interests in teaching control systems and robotics technology can be an excellent start. The university as catalyst in the process by designing the curriculum, system hardware and software then through the common interest deploying them in the high schools and community college. …

Enabling Multidisciplinary Perspective In Student Design Project: Fast Fashion And Sustainable Manufacturing Systems, Vukica M. Jovanovic, Manveer Mann, Petros J. Katsioloudis, Daniel L. Dickerson

Engineering Technology Faculty Publications

Fast fashion retailers are growing faster than any other type of retailer due to their ability to offer trendy low-cost clothing mimicking latest runway trends with turnaround times as low as two weeks. Fueled by short production and distribution lead times, fast fashion retailers combine rapid prototyping, small batches of fashionable product designs, and efficient transportations and delivery. Among others, the methods applied in fast-fashion industry include mass customization and personalization, and lean manufacturing. Current trends in manufacturing lean towards the application of digital and rapid manufacturing methods and increased use of product lifecycle management, knowledge management systems and computer …

Delivery Of Hands-On Technical Courses Through Real-Time Distance Learning, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Feng Jao

Engineering Technology Faculty Publications

It is generally believed that it is too challenging to deliver technical laboratory courses using distance learning technologies. The focus of this research was to develop strategies that may be used to address these challenges. A research team composed of faculty from several universities and community colleges explored what might be needed to make these types of technical laboratory course instruction possible using distance learning technologies. The team explored delivering a microcontroller embedded systems design course through audio-visual distance learning technologies. The team's research and development activities are discussed. These include focuses on the technical training equipment that had to …

Dissemination Of Microprocessor Courses Through Classroom And Interactive Cyber-Enabled Technologies, Steve C. Hsiung, John M. Ritz, Ece Yaprak, Thomas B. Stout, Richard L. Jones

Engineering Technology Faculty Publications

The project is in the middle stages of the implementation. There seems to be a positive attitude of learning and using of the training system and curriculum package by all project staffs. Microchip, Inc. and microEngineering Labs, Inc. have donated supplies to support the hardware and software development for this project. The next objectives are team training, recruitment of interested trainees/teachers to participate in training for summers 2014, and assess the effectiveness of the implementations with teachers and students. Photo 2 is the project logo that describes all the concepts of this project.

Teaching Laboratory Courses Using Distance Learning Technologies, Steve C. Hsiung, John Ritz

Engineering Technology Faculty Publications

Conducting laboratory activities is essential for teaching and learning in engineering and technology subjects. This article discusses explorations made by a research team to find solutions to enable the distance-learning delivery of laboratory courses on embedded microcontroller technology topics. In addition, this article includes a review of videoconferencing and course management tools, uniquely designed laboratory equipment and supporting curriculum materials, and statistical evidence showing students can learn technical laboratory content in distance-learning environments.

Meng 4200: Heat Transfer—A Peer Review Of Teaching Project Benchmark Portfolio, Yuebin Yu

UNL Faculty Course Portfolios

The main goal of attending this course review project is to improve my teaching performance of technical courses so that both the students and I can enjoy the mutual-learning process. Teaching to me is really rewarding. I believe teaching is an art, which can be continuously improved through learning from the peers, collecting and analyzing students' feedback and practice, regardless whether it is technical or practical. With good teaching, any course can be taught in a joyful manner. The specific objectives of the course portfolio include the follows: 1. Document the main materials for future refining through the documentation process …

Agen/Bsen 344: Biological And Environmental Transport Processes—A Peer Review Of Teaching Project Benchmark Portfolio, Shadi F. Othman

UNL Faculty Course Portfolios

The course I am providing a portfolio for is BSEN/AGEN 344 which is a required course for all our undergraduate students. The Department provides an assessment for the course to align itself with the ABET's Accreditation Process. I taught the course in Spring 2012 adapting a new Team Based Learning Approach. I have three main objective from my portfolio: (1) refine my methods in documenting the linkage between my course goals and assessment measures, (2) document the efficacy of team based learning approach, (3) refine team based learning approach for the current course and adapt the approach to future courses, …

The Importance Of Formative Assessment In Science And Engineering Ethics Education: Some Evidence And Practical Advice, Matthew W. Keefer, Sara E. Wilson, Harry Dankowicz, Michael C. Loui

School of Engineering Education Faculty Publications

Recent research in ethics education shows a potentially problematic variation in content, curricular materials, and instruction. While ethics instruction is now widespread, studies have identified significant variation in both the goals and methods of ethics education, leaving researchers to conclude that many approaches may be inappropriately paired with goals that are unachievable. This paper speaks to these concerns by demonstrating the importance of aligning classroom-based assessments to clear ethical learning objectives in order to help students and instructors track their progress toward meeting those objectives. Two studies at two different universities demonstrate the usefulness of classroom-based, formative assessments for improving …

Integrating Information Into The Engineering Design Process, Michael Fosmire, David Radcliffe

Purdue University Press Books

Engineering design is a fundamental problem-solving model used by the discipline. Effective problem-solving requires the ability to find and incorporate quality information sources. To teach courses in this area effectively, educators need to understand the information needs of engineers and engineering students and their information gathering habits. This book provides essential guidance for engineering faculty and librarians wishing to better integrate information competencies into their curricular offerings. The treatment of the subject matter is pragmatic, accessible, and engaging. Rather than focusing on specific resources or interfaces, the book adopts a process-driven approach that outlasts changing information technologies.

After several chapters …

Analysis Of The Industrial Skill Set; Lewis County Case Study, Jonathan Shane Wallingford

Morehead State Theses and Dissertations

A Thesis Presented to the Faculty of the College of Science and Technology Morehead State University in Partial Fulfillment of the requirements for the Degree Master of Science by Jonathan Shane Wallingford on December 13, 2013.

College Of Engineering Senior Design Competition Fall 2013, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Acuta Enews December 20132 Vol. 42, No. 12

ACUTA Newsletters

In this Issue...

1 Board Approves Slate of Nominees

1 A Gift from ACUTA to You!

2 Nominate Now for Ruth A, Michalecki Leadership Award i

3 What's on Your Desk?

4 From the Listserv

6 RF Video Distribution Solution for the University of the South

7 Info Links

8 Board Report

9 Welcome New Members

9 Check It Out

Improvement Of Pedagogical Laboratory Based Learning: Multimedia Enhanced Instructional Methods, Sumbul Khan

Masters Theses & Specialist Projects

In engineering technology and other scientific-based education, lab-based courses play a crucial role (Ma & Nickerson, 2006). Even though laboratory experience in student learning is crucial, it faces some problems. Due to insufficient laboratory conditions that lead to overcrowding and inability to view demonstrations, the effectiveness of hands on experience declines (Tiwari & Singh, 2011; Tuysuz, 2010). Considering the limitations that constrain lab experience, investigating and implementing alternatives to enhance pedagogical laboratory based learning becomes inevitable. This study investigates multimedia enhanced pedagogical teaching methods for delivering laboratory instruction to students. The purpose of this study was to improve pedagogical laboratory …