Engineering Commons^™

Nebraska Test #2302: Claas Xerion 12.650 Terra Trac, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Test #2300: Claas Xerion 12.590 Terra Trac, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Test #2268: Case Ih Steiger 595, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

A Comparative Study Of Machine Learning Models For Javanese Wuku Classification: Exploring Svm, Naïve Bayes, And Cnn For Cultural Texts, Danang Arbian Sulistyo, Aji Prasetya Wibawa, Didik Dwi Prasetya, Fadhli Almu'iini Ahda, Agung Bella Putra Utama

Knowledge Engineering and Data Science

This study rigorously evaluates machine learning models for classifying culturally significant Javanese Wuku texts from the “Keagamaan atau Spiritual” category, a domain challenged by unique linguistic nuances and limited digitized resources. We compared Support Vector Machine (SVM), Naïve Bayes, and Convolutional Neural Network (CNN) on texts from five pivotal Wuku types (Sinta, Galungan, Kuningan, Sungsang, Warigalit) sourced from sastra.org, aiming to identify the most effective computational approach. The dataset comprises N = 1419 documents (T = 751.290 tokens), with per-class document counts reported for all five Wuku types. Our evaluation uses accuracy, precision, recall, F1-score, and …

Exploring The Benefits, Barriers, And Sustainability Of Community Stem Partnerships: A Qualitative Case Study On Stem Collaboration In Elementary Education, Katherine M. Blagden

Open Access Dissertations

In an era of increasing emphasis on science, technology, engineering, and mathematics (STEM) education, elementary schools often face significant challenges in implementing high-quality, integrated STEM instruction. These challenges include limited resources, inconsistent professional development, and a lack of access to real-world, community-based learning experiences (Dorph et al., 2018; National Science Board, 2024). This dissertation explores how collaborative partnerships among elementary schools, community organizations, and industry professionals can overcome these barriers and foster meaningful, sustainable STEM learning opportunities for young students. Drawing on the Asset-Based Community Development (ABCD) model (Kretzmann & McKnight, 1993) and informed by a constructivist theoretical framework (Vygotsky, …

Mangroves: A Lesson On Modeling Changing Shorelines, Willa Skye

ENGS 15.11: Design and Education

This lesson is an overview of storm barriers, specifically mangroves and how they maintain shorelines. It is meant to offer a visual experience of coastline protection and provide a background for deeper understanding about intertidal zones and their conservation. Students will spend time creating a solution to a flooding problem by making a mock coast and storm barrier. To wrap-up the lesson, students will pair up, then reflect on their model and then individually write or draw their takeaways.

Using Design Thinking To Upcycle, Lily Chabica

ENGS 15.11: Design and Education

This 60-minute lesson introduces the power of design thinking as a tool for sustainability. Through short discussions, visual examples, and a hands-on “Trash Island” design challenge, students will explore how creativity can transform waste into value. The session combines theory (understanding upcycling vs. recycling) with active practice (building prototypes from found materials). By the end, students will connect environmental responsibility to personal agency. They will realize that design can drive everyday impact.

An Educational Framework For The Disruptive Technologies And Their Integration In The Un Sdgs Curriculum, Tulsi Pawan Fowdur, Aishani Radhakeesoon

Journal of Educational Technology Development and Exchange (JETDE)

Disruptive technologies such as 5G, AI, IoT, cloud computing, and blockchain are revolutionizing life on our planet and at the same time contributing immensely towards sustainable development and the achievement of the UN SDGs. Nowadays, optimizing the management of resources in various fields such as manufacturing, education, health, transportation etc. in a much more efficient way is possible. This can be achieved by capturing a wealth of real-time data via IoT sensors with the ultra-reliable and low latency connections provided by 5G. Additionally, with cloud computing, blockchain, and AI, these real-time systems can securely transmit, store, and analyze a massive …

Perspectives Of Corporate Instructional Design Experts On Effectiveness, Personal Traits And Attributes, And Technology, Thomas A. Gant

Theses and Dissertations

This qualitative phenomenological descriptive study explored corporate instructional design experts' perspectives on effectiveness, personal traits and attributes, and technology that enhance their expertise. Three central themes emerged: "Mastering Instructional Design: The Journey of Continuous Learning and Skill Development," highlighting the importance of mentorship, lifelong learning, and professional development; "Accessing Instructional Design Expertise Through Individual Strengths," emphasizing adaptability, problem-solving, and empathy; and "Navigating Technological Integration and Innovation in Instructional Design," showcasing the transformative role of tools such as virtual reality, learning management systems, and authoring software. Semi-structured interviews conducted via Zoom with 10 corporate instructional designers with at least 10 years …

Assessing The English Language Needs Of Student Pilots: A Comprehensive Analysis For Effective Aviation English Training, Triyani Rps Dewi, Lilis Kurnianingsih

International Journal of Aviation, Aeronautics, and Aerospace

This research aims to identify the English language material needs for pilot students at the Indonesian Civil Aviation Polytechnic in order to improve communication skills that are essential for flight safety and operational effectiveness. In data collection, the researcher distributed questionnaires to students and conducted a Focus Group Discussion (FGD) involving students, flight instructors, English lecturers, and experienced pilots. The research results show that pilot students need two main skills in English learning. First, listening skills, especially in understanding instructions from ATC. Second, speaking skills used to respond to ATC instructions and to make requests or ask for information from …

Utilizing Information Technology And Hands-On Learning Practices To Improve Student Learning Outcomes In A High Failure Rate Introductory Programming Course, Todd Edward Thomas

Theses and Dissertations

The purpose of this study was to introduce and examine the impact that two interventions have on a high failure rate introductory programing course: a pedagogical approach of introducing Live Coding instruction technique to the in-person lecture portion, and a technological approach of introducing remote collaboration software (VS Code Liveshare) to the online lab portion. This study used convergent parallel mixed methods approach for both data collection and analysis; utilizing four data collection methods: 1) online survey questionnaires 2) in-depth interviews 3) in class observations and 4) quantifiable data collection (ie., student demographic, IT experience, GPA data). The Live Coding …

A Novel Low-Complex Optimized Resource Allocation Algorithm Using Gwo Optimization Technique In Energy Scavenging For Wban, M. Samir Abou El-Seoud, Amira Olazan, Albashir A. Youssef

Computer Science

In wireless body area networks (WBANs) powered by energy scavenging, effectively managing renewable energy is critical to ensuring delay-sensitive services. This paper proposes a novel low-complex optimized resource allocation algorithm using the Grey Wolf Optimization (GWO) technique to allocate resources, specifically energy and communication channels, and maximize user utility while guaranteeing the worst-case delay. To achieve this, firstly, a formulation of a user utility optimization problem that accounts for the stochastic nature of energy scavenging and consumption without requiring prior knowledge of these processes is performed. Utilizing GWO optimization techniques, optimization problems broke down into four sub-problems: battery management, collection …

Transforming Engineering Education: Project-Based Learning And Technology Integration In A Senior-Level Mechanisms Course, Krishnanand Kaipa, Anurag Purwar, Orlando M. Ayala, Sebastian Bawab

Mechanical & Aerospace Engineering Faculty Publications

Engineering education faces the challenge of preparing students for a rapidly evolving, interdisciplinary field that demands a strong foundation in theoretical principles, practical skills, and the ability to solve real-world problems. This study describes a project-based learning (PBL) intervention implemented in a senior-level mechanical engineering course focused on mechanisms analysis and design. The intervention combined foundational coursework with bio-inspired design projects, where students developed walking end-effector robotic mechanisms for medical applications. Students utilized tools such as MotionGen software and SnappyXO kits to synthesize, simulate, prototype, and test their designs. Qualitative analysis of student evaluations and project reports revealed that the …

Wip-Monarch Accelerator Program To Engineering: A Reflection On The First Semester, Kristin Eden, Jeffrey W. Fergus, Stacie I. Ringleb

Mechanical & Aerospace Engineering Faculty Publications

This work in progress paper examines the Monarch Accelerator Program to Engineering (MAP2E) program. The MAP2E Program was developed to assist students who desire to become engineers but may need additional assistance in math and science. and it allows students to develop their math and science skills while creating a pathway to personal or professional enriching skills. Furthermore, the MAP2E program allows students to develop their math and science skills and create parallel pathways to personal or professionally enriching skills. For instance, a student may hope to one day start their own engineering firm. A business administration pathway would allow …

Artificial Intelligence Event Video Collection (2025), Peaaii Umass Boston

Paul English Applied Artificial Intelligence (AI) Institute Publications

This submission contains a collection of recorded videos and promotional materials from artificial intelligence events organized by the Paul English Applied AI Institute (PEAAII) at the University of Massachusetts Boston in 2025. These events include AI Frontier Day, the Fall Symposium, and the AI Applications Hackathon.

The video collection highlights student research, academic collaboration, and applied learning experiences in artificial intelligence. These materials are intended to support education, increase accessibility to AI-related content, and showcase the work of students and faculty involved in PEAAII programs.

Representation In Engineering-Focused Children's Literature: A Critical Content Analysis, Angela Eckhoff

Teaching & Learning Faculty Publications

Children’s picturebooks have long been understood as a powerful medium for exploring aspects of children’s lives, experiences, and identities serving as mirrors which allow children to see themselves reflected, as windows through which they can gain insight into the experiences of others, and as sliding glass doors when children are connected to the story and characters in meaningful ways. Utilizing a critical content analytic approach, this research examined the identity markers and engineering practices found in contemporary children’s picturebooks with an engineering focus. The analysis yielded key themes that highlight the ways children can interact and connect to the characters …

A Pathway To Completion: Student Veterans Pursuing Engineering Degrees, Kim E. Bullington, Cynthia L. Tomovic, Anthony W. Dean, Vukica Jovanovic

Educational Leadership & Workforce Development Faculty Publications

This 5‐year research project was based on an NSF S‐STEM research grant (1742118) focused on student veteran education and workforce preparation. We addressed STEM workforce and defence community needs by providing targeted scholarships and support for veteran students pursuing engineering degrees. Our aim was to enhance the workforce by improving access and success rates through financial and institutional support, while developing evidence‐based practices for recruitment, retention and graduation of student veterans. Through targeted interventions, we examined obstacles student veterans face in education and in engineering programs and increased their sense of camaraderie, career awareness, engineering identity, professional development, financial security …

The Antibiofilm Efficacy Of Copper And Zinc-Enhanced Borate Bioactive Glasses On Polymicrobial Biofilms, Sarah Fakher, David J. Westenberg

Biological Sciences Faculty Research & Creative Works

Healthcare-acquired infections (HAIs) are a significant global challenge driven by biofilm-forming pathogens. Polymicrobial biofilms, involving interactions between multiple microbial species, exacerbate treatment difficulties due to their enhanced resistance to antimicrobial therapies. Borate bioactive glasses (BBGs) are an emerging class of biomaterials that have attracted significant interest in infection control. The incorporation of copper and zinc into the BBG matrix can effectively disrupt biofilm formation and bacterial colonization. This study investigates the antibiofilm efficacy of copper and zinc-doped BBGs against polymicrobial biofilms formed by S. epidermidis, E. coli, and P. aeruginosa. Using static and dynamic biofilm models, BBGs were applied through …

Ground Testing Of A Magnetic-Electrostatic Separation System For Lunar Regolith Beneficiation, Peter Bachle, Charles Wood, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

The separation of lunar regolith by mineral composition and size category is useful forin-situ resource utilization (ISRU). The research presented herein discusses the designing and development of equipment that has the potential to separate lunar regolith into aluminum, iron-titanium, and magnesium-iron ores. Along with the metal ore separation, this equipment shows the potential to separate regolith by size categories. The combined effect of these separation methods generates output that is valuable to subsequent use in metal and oxygen extraction, additive manufacturing, and regolith sintering processes. The designed equipment uses a dual-strength magnet system with N42 and N52 neodymium magnets for …

Embrace The Journey: Exploring Induction Experiences Of Teachers In Ohio Independent Stem Schools, Laura Sass

Indiana STEM Education Conference

The beginning years of a new teacher are a critical period. This study investigated perceptions of induction activities of new teachers in Ohio Independent STEM schools. STEM-based pedagogies such as problem-based learning and inquiry are core strategies in STEM schools but can be new for beginning teachers. Through a Q-sort, thirteen participants from three Independent STEM Schools ranked statements on a +5 to -5 scale of agreement. This along with a post-sort survey resulted in themes. Positive school culture and colleague collaboration and the impact of the mentoring were found to be the most impactful. This research aligns with literature …

Indiana Stem Teachers’ Perceptions Of The Shift From In-Person To Virtual Training During The Covid-19 Pandemic, Steve Heinold

Indiana STEM Education Conference

The COVID-19 pandemic brought uncertainty to Indiana teachers in 2020. School closings caused disruptions to teachers’ classroom settings, ongoing training, and social and mental well-being (Pozo-Rico et al., 2020). Indiana GEAR UP’s commitment to teacher professional development for STEM educators led to a shift from their in-person summer teacher training sessions to virtual, just months after the school shutdowns in spring 2020. Participant evaluations showed that teachers appreciated the virtual training options and were able to learn new strategies to apply to their new virtual learning spaces. The online training sessions also had drawbacks. This research brief describes recommendations to …

Spatio-Visual Reasoning And Teamwork Through Hands-On Stem Construction Activities, Comfort Temitope Aje, Maria Eloisa C. Nuguid, Melihan Ünlü, Humphrey Chinenye Ochulor

Indiana STEM Education Conference

This study examined a STEM activity in which students in grades K-6 designed and built a model of Snoopy’s doghouse with considerations for constraints, teamwork, and iterative design. By combining spatial reasoning with imagination and visualization, students collaborated to create 3-D structures from 2-D plans, demonstrating enhanced spatial visualization and the ability to connect geometry to a tangible engineering task. The findings highlight the value of spatio-visual design activities in promoting skills like spatial reasoning, critical thinking, and problem-solving.

Leveraging Undergraduate Expertise For Effective Stem Instruction: Insights From A Forensic Science Teaching Partnership, Swagata Sarkar, Hui-Hui Wang, Austin R. Jenkins, Mariah K. Stollar

Indiana STEM Education Conference

Although integrated science, technology, engineering, and mathematics (STEM) instruction has been cited as a viable instructional approach to increasing the number of students interested and prepared to enter the STEM workforce, teacher content knowledge can be a limiting factor to effective implementation (Ejiwale, 2013). To address this limitation, college STEM majors can use their content expertise to support the development and implementation of integrated STEM experiences for K-12 students (Ferrara et al., 2018). This research brief reports on a university-high school partnership where undergraduate students in a university forensic science club created and implemented integrated STEM lessons in a local …

Stem Education In Indiana: Analyzing The Availability Of Stem-Certified Schools For Underrepresented Communities, Bryan J. Duarte

Indiana STEM Education Conference

This study examines the equity of access to STEM-certified schools in Indiana, focusing on differences in student demographics between STEM-certified and non-STEM-certified schools. The results show no statistically significant differences in the percentage of female, non-White, or lower socio-economic students between the two groups. However, significant differences were found in the percentages of Latiné/a/o/x, Native Hawaiian or Pacific Islander, and Asian students, with these groups being underrepresented in STEM-certified schools compared to non-STEM-certified schools.

Boosting Computational Thinking In Integrated Stem Education With Cad, Hyeong Kyun Park, Jung Han, Yunjin Lim

Indiana STEM Education Conference

Integrated STEM education offers a powerful approach to enhancing students’ learning. By integrating science inquiry, technological literacy, engineering design, and mathematical thinking, integrated STEM fosters students’ 21st-century competencies, such as creativity, critical thinking, collaboration, and computational thinking. Drawing from a national integrated STEM project, this research uses a classroom case study to investigate the integration of Computer-Aided Design (CAD) and 3D printing into a STEM learning activity. It examines the use of mathematical computation to determine the best solution for a prototype that meet functional criteria. This research highlights how introducing CAD instruction enhances computational thinking within a conceptual framework …

Lilly Reich: La Mente Detrás Del Mobiliario Moderno Que La Historia Olvidó, Noa Llanas Angrill

GDI. Revista de investigación de Género, Diseño e Innovación

La historia ha sido escrita desde una perspectiva que se ha invisibilizado las contribuciones femeninas en su desarrollo. Este artículo se centra en Lilly Reich (1885-1947), figura clave del diseño moderno, cuya autoría ha sido eclipsada por la de su colaborador Ludwig Mies van der Rohe. La investigación evidencia que la diseñadora no solo contribuyó al diseño de mobiliario moderno y de espacios expositivos, sino que lideró proyectos clave y que su trabajo ha impactado en el diseño expositivo, textil y mobiliario moderno.

Integrating Turtle Graphics And Engineering Design: Enhancing Problem-Solving And Critical Thinking Through Digital And Physical Prototyping, Abigail Erskine

Indiana STEM Education Conference

This research brief is a review of literature on integrating Turtle Graphics and engineering design to enhance students' problem-solving and critical thinking through prototyping. Integrating Turtle Graphics with digital and physical prototyping engages students in the engineering design process, helping them bridge abstract mathematical concepts with real-world applications. By combining programming and engineering design, Turtle Graphics supports complex tasks like visualization and design modeling, which improves students’ critical thinking, design thinking, and problem-solving skills. Through iterative testing and refinement, students gain practical insights into engineering concepts such as modeling and creating prototypes.

Proceedings Of The Tenth Annual Indiana Stem Education Conference: Generational Advances Through Stem Education, William S. Walker Iii, Lynn A. Bryan, S Selcen Guzey

Indiana STEM Education Conference

The Proceedings of the Tenth Annual Indiana STEM Education Conference are edited by the Center for Advancing the Teaching and Learning of STEM (CATALYST, https://www.education.purdue.edu/catalyst/) at Purdue University. The theme for the 2025 conference is Generational Advances through STEM Education. This year’s conference provides opportunities to learn about effective STEM education strategies, curriculum, and resources to engage students by considering the advances and impact of STEM.

Ginger: The Effect Of Illustrated Storybooks On Children’S Response And Teachers’ Facilitation In Stem Education, Defne Yabas, Tugba Abanoz, M. Sencer Corlu

Indiana STEM Education Conference

This study aims to explore children’s and teachers’ responses to the integration of illustrated storybook content into STEM activities in early childhood. The correlation between STEM content and illustrations in children's storybooks conveying scientific information is a crucial aspect that can impact children's learning of STEM. Studies have reported the utilization of storybooks in STEM education for young children (Abanoz & Yabaş, 2022; Pantoya et al., 2015), yet an absence of research has been noted regarding the impact of illustrated storybooks on children's engagement in STEM education. There is substantial research evidence that early childhood teachers have low self-efficacy beliefs …

Informal Education Experiences: Why Stem Camps Matter, Jeffrey A. Nowak, Dale Ruppert

Indiana STEM Education Conference

This research brief details some of the positive impacts of student participation in after-school STEM (Science, Technology, Engineering, and Mathematics) camps provided by universities and informal education centers as described in published literature. In addition, the authors reviewed 2,841 anonymous participant surveys of 1^st-12^th grade students involved in nineteen STEM camps held at Purdue University Fort Wayne from 2019-2024 for related findings. Findings indicate that providing an enjoyable and enriching learning environment for STEM camps can foster a mindset of curiosity and a love for learning. Students who attend STEM camps likewise often experience a range of …