Engineering Commons^™

Dynamic Assignment Of Scoped Memory Regions In The Translation Of Java To Real-Time Java, Morgan G. Deters

All Computer Science and Engineering Research

Advances in middleware, operating systems, and popular, general-purpose languages have brought the ideal of reasonably-bound execution time closer to developers who need such assurances for real-time and embedded systems applications. Extensions to the Java libraries and virtual machine have been proposed in a real-time Java standard, which provides for specification of release times, execution costs, and deadlines for a restricted class of threads. To use such features, the programmer is required to use unwieldy code constructs to create region-like areas of storage, associate them with execution scopes, and allocate objects from them. Further, the developer must ensure that they do …

Integrated Coverage And Connectivity Configuration In Wireless Sensor Networks, Xiaorui Wang, Guoliang Xing, Yuanfang Zhang, Chenyang Lu, Robert Pless, Christopher Gill

All Computer Science and Engineering Research

An effective approach for energy conservation in wireless sensor networks is scheduling sleep intervals for extraneous nodes, while the remaining nodes stay active to provide continuous service. For the sensor network to operate successfully, the active nodes must maintain both sensing coverage and network connectivity. Furthermore, the network must be able to configure itself to any feasible degrees of coverage and connectivity in order to support different applications and environments with diverse requirements. This paper presents the design and analysis of novel protocols that can dynamically configure a network to achieve guaranteed degrees of coverage and connectivity. This work differs …

Multiflow Tcp, Udp, Ip, And Atm Traffic Generation Module, Eliot I. Sinclair, John W. Lockwood

All Computer Science and Engineering Research

Networking devices must be capable of processing traffic flows from multiple sources. In order to verify that such devices operates properly, a network testbench can be used to inject traffic into the device. The specification of the traffic flows can be difficult. At the low level, there are header fields, data checksums, and packet length fields that all must be formatted correctly. Further, there can be multiple flows of traffic that will arrive simultaneously. It is desirable to specify traffic at a high level of abstraction. A software program can then be written to parse the specification and generate the …

System-On-Chip Packet Processor For An Experimental Network Services Platform, David Taylor, Alex Chandra, Yuhua Chen, Sarang Dharmapurikar, John Lockwood, Wenjing Tang, Jonathan Turner

All Computer Science and Engineering Research

As the focus of networking research shifts from raw performance to the delivery of advanced network services, there is a growing need for open-platform systems for extensible networking research. The Applied Research Laboratory at Washington University in Saint Louis has developed a flexible Network Services Platform (NSP) to meet this need. The NSP provides an extensible platform for prototyping next-generation network services and applications. This paper describes the design of a system-on-chip Packet Processor for the NSP which performs all core packet processing functions including segmentation and reassembly, packet classification, route lookup, and queue management. Targeted to a commercial configurable …

A Thesis On A 3d Input Device For Sketching Characters, Mark A. Schroering

All Computer Science and Engineering Research

The goal of this project is to develop a 3D input device using a stiff piece of paper and a camera. The camera tracks the piece of paper in 3D space. The user orients the paper in 3D space and then draws on the paper using a pen-like device. The camera tracks the movement of the pen on the piece of paper. The location of the pen in 3D space can then be calculated from the orientation of the paper. A drawing application that uses this 3D input device was also developed. The application allows a user to make characters …

Detecting Cracks In Thin Plates By Using Lamb Wave Scanning: Geometric Approach, Roberto A. Osegueda, Vladik Kreinovich, Enrique Roldan, Rodrigo Mares

Departmental Technical Reports (CS)

A crack in a thin plate reflects ultrasonic waves; therefore, it is reasonable to determine the location of the crack by measuring the reflected waves. The problem of locating the crack can be reformulated in purely geometric terms. Previously, time-consuming iterative numerical methods were used to solve the resulting geometric problem. In this paper, we show that explicit (and fast to compute) formulas can be used instead.

Probabilities, Intervals, What Next? Optimization Problems Related To Extension Interval Computations To Situations With Partial Information About Probabilities, Vladik Kreinovich

Departmental Technical Reports (CS)

When we have only interval ranges [xi-,xi+] of sample values x1,...,xn, what is the interval [V-,V+] of possible values for the variance V of these values? We prove that the problem of computing the upper bound V+ is NP-hard. We provide a feasible (quadratic time) algorithm for computing the exact lower bound V- on the variance of interval data. We also provide feasible algorithms that computes V+ under reasonable easily verifiable conditions, in particular, in case interval uncertainty is introduced to maintain privacy in a statistical database.

We also extend the main formulas of interval arithmetic for different arithmetic operations …

A Pipelined Architecture For Real Time Correction Of Barrel Distortion In Wide-Angle Camera Images, Hau Trung Ngo

Electrical & Computer Engineering Theses & Dissertations

Images captured by wide-angle cameras show barrel type spatial distortion due to wide-angle configuration of the camera lens where image regions farther from the center are compressed in a nonlinear fashion. The barrel distortion correction technique based on least squares estimation attempts to correct a distorted image by expanding it nonlinearly so that straight lines in the object space remain straight in the image space. The intensity value of a pixel in the expanded image is calculated by back mapping its position to the corresponding position in the distorted image and performing linear interpolation on the neighboring pixels. Distorted images …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 19, Number 6, April 2003, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

User Interface Improvement For Mlpq System, Shasha Wu

School of Computing: Dissertations, Theses, and Student Research

This thesis describes the experience of migrating the MLPQ constraint database system, a complex standalone Multiple Document Interface (MDI) application, to a server-based remote accessible application. Centralized, standalone MDI application is a common style for personal software products in Windows. For a database management system, server-based, thin-client computing is a more popular infrastructure. Migrating an existing standalone constraint database application to be a web accessible constraint database server is the main goal of this thesis. This migration process provides a method for the constraint database system to collaborate with other specific applications. We rebuild the desktop MLPQ constraint database system …

2003 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2003.

Study About High Influence Doping To Base Resistance And Bandgap Narrowing At Si/Si1-Xgex/Si Heterojunction Bipolar Transistor, Achmad Fadhol

Makara Journal of Technology

Study About High Influence Doping to Base Resistance and Bandgap Narrowing at Si/Si1-xGex/Si Heterojunction Bipolar Transistor. Heterojunction is a link formed bedween two semiconductor materials and differend bandgap which has thinness under 50nm and grow the mixture of plate SiGe as bases. The link is an abrupt link or graded one. In this research learnt formulation of doping concentration influence to basis resistance and bandgap narrowing through Si/Si1-xGex/Si Heterojunction Bipolar Transistor with abrupt emitter-basis link, besides taking care to mobility and basis wide to basis resistance, it is also influence of mole fraction to bandgap power. From the result shows …

Photocatalytic Treatment Of Heavy Metal Waste Cr(Vi) Withtio2 Photocatalyst, Slamet Slamet, Riyadi Syakur, Wahyu Danumulyo

Makara Journal of Technology

Photocatalytic Treatment of Heavy Metal Waste Cr(VI) with TiO2 Photocatalyst. The photocatalytic reduction of hexavalent chromium/Cr(VI) using TiO2 and copper-doped TiO2 as photocatalysts have been studied in stirred tank and circulating photoreactors. All photocatalysts were characterized with FTIR (Fourier Transform Infra Red), BET (Brunauer-Emmett-Teller), XRD (X-Ray Diffraction) and SEM (Scanning Electron Microscope). TiO2 Merck and Degussa P-25 are the commercial photocatalysts used to compare the photocatalytic activity of all the prepared catalysts. Blank test experiments as well as the effect of dopants, EDTA (ethylenediaminetetraacetic acid) and activated carbon addition were studied. Cr(VI) reduction on various pH and initial Cr(VI) concentration …

Development And Analysis Of Geographic Information System For Electricity Network (Case Study: Surabaya Industrial Estate Rungkut In Surabaya)., Lilik Jamilatul Awalin, Bangun Muljo Sukojo

Makara Journal of Technology

Development and Analysis of Geographic Information System for Electricity Network (Case Study: Surabaya Industrial Estate Rungkut in Surabaya). Geographic Information System (GIS) is a system of data which has spatial base. This may be cause has ability to process and analysis data quickly. The ability of GIS will be able to process the alternative in decision making. The need of electric power grows until recent time along with the existence of industrial sector expansion and land use expansion claim better service, large and balance stock of electric power. GIS is a solution for planning and managing data base system, for …

Application Of Remote Sensing And Geographic Information System Methods For Land Using Difference, Bangun Muljo Sukojo, Diah Susilowati

Makara Journal of Technology

Application of Remote Sensing and Geographic Information System Methods for Land Using Difference. Land using difference analysis has been done using remote sensing and Geographic Information System (GIS) methods. Identification of land using difference was conducted using map overlaying process of 1990s (digitized scalling 1:50.000) and 1997s land using map (interpreted from Landsat TM (Thematic Mapper) Image 1997) with UTM (Universal Transverse Mercator) coordinate. Image enhancement was done through histogram equalization with supervised classification devided into 7 classes: rice field, settlement, dry field, industry, pond, sport field and bush. Land using difference and river pollution BOD (Biological Oxygen Demand), COD …

Phase Composition Analysis Using Rietveld Methode And It's Influence To The Hardness Of Ti-Si-N Nanocomposites, Keba Moto, Lia Setiarini, Zufar Abubakar

Makara Journal of Technology

Phase composition analysis using rietveld methode and it’s influence to the hardness of Ti-Si-N nanocomposites. XRD data of nanocomposites Ti-Si-N have been analysed using GSAS based on Rietveld Method in order to identify phases and their composition as well as its influence on the hardness of these nanocomposites. Several new phases have been found in the sample beside the nc-TiN/a-Si3N4& a-/nc-TiSi2 that have been known widely. From the obtained crystalline phase, after the calculation of amorf Si3N4 and TiSi2 phase fraction, it is found that the optimum hardness can be reached when the fraction of a-Si3N4 phase around 8 wt.%

Influence Of Strain Rate And Temperature Of Hot Tension Testing On Mechanical Properties Of Medium Carbon Steel S48c, Dedi Priadi, Iwan Setyadi, Eddy S. Siradj

Makara Journal of Technology

Influence of Strain Rate and Temperature of Hot Tension Testing on Mechanical Properties of Medium Carbon Steel S48C. The characterization of S48C by hot tension testing was done to understanding the influence of temperature and strain rate for S48C flow stress, that close relationship with its forge ability. The hot tension testing was performed on temperatures and strain rates variation (T 850, 900, 950 0C and έ 0,01;1 s-1). The result of hot tension testing showed that increasing temperature decreases ultimate tensile strength (UTS) and flow stress of S48C. The higher decreasing of UTS is on 950 0C about 85% …

A Study In Java Bytecode Engineering With Pcesjava, Martin R. Linenweber

All Computer Science and Engineering Research

This thesis reports on experience with PCESjava, a collection of tools which we have developed for the purpose of aiding programmers. Particular applications optimize and instrument JAVA bytecode programs. Using these tools, we have successfully identified impediments to real-time performance in a popular JAVA collections object. Our approach here is based on automatic instruction to obtain traces that show paths whose execution time is not reasonably bounded. We also report on the application of our tool to reduce program footprint in JAVA programs by rewriting the bytecodes to occupy less space. Our transformations also improves the running time of set …

Building Customer Trust In Mobile Commerce, Keng Siau, Zixing Shen

Research Collection School Of Computing and Information Systems

Customer trust, which is crucial for the growth and success of mobile commerce, is discussed. Building customer trust is a complex process that involves technology and business practices as well as movement from initial trust formation to continuous trust development. Gaining customer trust involves consideration of its three components: competence trust, predictability trust and goodwill trust. From a customer's perspective, competence trust in e-commerce is built upon the Internet vendor's skills, expertise and operational abilities.

Automatic Speaker Identification Using Reusable And Retrainable Binary-Pair Partitioned Neural Networks, Ashutosh Mishra

Electrical & Computer Engineering Theses & Dissertations

This thesis presents an extension of the work previously done on speaker identification using Binary Pair Partitioned (BPP) neural networks. In the previous work, a separate network was used for each pair of speakers in the speaker population. Although the basic BPP approach did perform well and had a simple underlying algorithm, it had the obvious disadvantage of requiring an extremely large number of networks for speaker identification with large speaker populations. It also requires training of networks proportional to the square of the number of speakers under consideration, leading to a very large number of networks to be trained …

Parallel Implementation Of A Face Recognition [Sic] System Based On Modular Pca Approach, Rajkiran Gottumukkal

Electrical & Computer Engineering Theses & Dissertations

This thesis describes research in automated methods for the recognition of human faces. The research is driven by the need to design a method, which would ensure high accuracy under the conditions of facial expression, illumination and pose variations. The resulting method is able to cope with uncontrolled nature of facial expression, illumination and head rotations. The main novelty of this work is the idea that some of the local facial features do not vary even when the facial expression, illumination and pose vary. This idea is applied to the existing principle component analysis lPCA) method to arrive at a …

Creating Enterprise Simulations Using High Level Architecture, Anton R. Lidums

Electrical & Computer Engineering Theses & Dissertations

Despite an established need, there are two remaining roadblocks to building distributed simulations and enterprise simulation systems. First, commercial simulation packages and engineering modeling tools are not readily distributable across multiple computers and have traditionally had very little impetus for utilizing a distributable format. Second, although HLA simulations have been built and there are tools to facilitate those efforts, very little has been done or written that specifically describes a "non-standard" integration implementation in sufficient detail to make the process reusable or repeatable. This thesis introduces a proof of concept prototype that was developed to integrate simulations. The paper presents …

Output Analysis Of Configurable Port Simulation, Ravikiran Jogu

Electrical & Computer Engineering Theses & Dissertations

The Configurable Port Simulation (CPortS) is a simulation of military cargo moving through a commercial seaport during a force deployment. CPortS simulates cargo at the individual entity level of detail. Simulation at the individual entity level generates huge amounts of output data making the output analysis difficult. To understand the reasons as to why bottlenecks occur in the process of cargo clearance, an analyst needs to be able to partition the data during analysis, not a priori. This makes the estimation of required graph generation impossible, which demands a very dynamic output analysis tool that can enable the analyst to …

Voice Activated Display Of American Sign Language For Airport Security, Glenn Lancaster, Karen Alkoby, Jeff Campen, Roymieco Carter, Mary Jo Davidson, Dan Ethridge, Jacob Furst, Damien Hinkle, Bret Kroll, Ryan Layesa, Barbara Loeding, John Mcdonald, Nedjla Ougouag, Jerry Schnepp, Lori Smallwood, Prabhakar Srinivasan, Jorge Toro, Rosalee Wolfe

Visual Communications and Technology Education Faculty Publications

Conference proceedings from the Technology and Persons with Disabilities Conference-2003.

California State University at Northridge, Los Angeles, CA March 17-22, 2003.

An Iterative Loop Matching Approach To The Prediction Of Rna Secondary Structures With Pseudoknots, Jianhua Ruan, Weixiong Zhang

All Computer Science and Engineering Research

Motivation: Pseudoknots have generally been excluded from the prediction of RNA secondary structures due to the difficulty in modeling and complexity in computing. Although several dynamic programming algorithms exist for the prediction of pseudoknots using thermodynamic approaches, they are neither reliable nor efficient. On the other hand, comparative methods are more reliable, but are often done in an ad hoc manner and require expert intervention. Maximum weighted matching (Tabaska et. al, Bioinformatics, 14:691-9, 1998), an algorithm for pseudoknot prediction with comparative analysis, suffers from low prediction accuracy in many cases. Here we present an algorithm, iterative loop matching, for predict-ing …

On The Relation Between Two Approaches To Combining Evidence: Ordered Abelian Groups And Uninorms, Ronald R. Yager, Vladik Kreinovich

Departmental Technical Reports (CS)

In this paper, we develop a relationship between two approaches to combining evidence: the Ordered Abelian Group (OAG) approach and the uninorm approach. We show that while there exist uninorms that are not extended OAG's it turns out that for operations which are continuous (in some reasonable sense), these two approaches coincide.

Dirty Pages Of Logarithm Tables, Lifetime Of The Universe, And (Subjective) Probabilities On Finite And Infinite Intervals, Hung T. Nguyen, Vladik Kreinovich, Luc Longpre

Departmental Technical Reports (CS)

To design data processing algorithms with the smallest average processing time, we need to know what this "average" stands for. At first glance, it may seem that real-life data are really "chaotic", and no probabilities are possible at all: today, we may apply our software package to elementary particles, tomorrow -- to distances between the stars, etc. However, contrary to this intuitive feeling, there are stable probabilities in real-life data. This fact was first discovered in 1881 by Simon Newcomb who noticed that the first pages of logarithm tables (that contain numbers starting with 1) are more used than the …

Exact Upper Bound On The Mean Of The Product Of Many Random Variables With Known Expectations, Vladik Kreinovich, Scott Ferson, Lev Ginzburg

Departmental Technical Reports (CS)

In practice, in addition to the intervals [xi] of possible values of inputs x1,...,xn, we sometimes also know their means Ei. For such cases, we provide an explicit exact (= best possible) upper bound for the mean of the product x1*...*xn of positive values xi.

Dimension Compactification -- A Possible Explanation For Superclusters And For Empirical Evidence Usually Interpreted As Dark Matter, Vladik Kreinovich

Departmental Technical Reports (CS)

According to modern quantum physics, at the microlevel, the dimension of space-time is at least 11; we only observe 4 dimensions because the others are compactified: the size along each of the other dimensions is much smaller than the macroscale. There is no universally accepted explanation of why exactly 4 dimensions remain at the microscopic level. A natural suggestion is: maybe there is no fundamental reason why exactly 4 dimensions should remain, maybe when we go to even larger scales, some of the 4 dimensions will be compactified as well? In this paper, we explore the consequences of the compactification …

Use Of Fuzzy Expert's Information In Measurement And What We Can Gain From Its Application In Geophysics, Leon Reznik, Vladik Kreinovich, Scott A. Starks

Departmental Technical Reports (CS)

The paper considers the problem of measurement information fusion from different sources, when one of the sources is an information about approximate values of the measured variables or their combinations. The information is given with fuzzy models and is used in combination with the measurement results. The properties of the modified estimates are studied in comparison with the conventional ones. The conditions when an expert's information application can give a high gain are derived, the gain value is estimated, the recommendations to an expert on making predictions are given. The possible gain in measurement result efficiency in geophysical applications is …