Engineering Commons^™

Numerical Simulation Of Hydrodynamic Forces On Riverine And Coastal Bridges Subjected To Extreme Weather Events, Fahad Pervaiz

Civil Engineering Dissertations - Archive

ABSTRACT: Recent bridge failures due to hurricane-generated storm surges and riverine flood events have highlighted the vulnerability of bridge infrastructure to extreme hydrodynamic loading. In addition to posing an immediate risk to human life, bridge failures can hinder evacuation planning and emergency response efforts. Changes in flood frequency and intensity due to climate change and urbanization may alter the hydrodynamic conditions along urban streams, further stressing bridge infrastructure designed based on historical flow conditions. As a result, quantifying the structural response and stability of bridges under current and future hydrodynamic conditions is crucial to improving transportation safety and efficiency. This …

Microplastic Risk Characterization Of Plastic Road, Md Shams Razi Shopnil

Civil Engineering Dissertations - Archive

In recent past, the act of waste recycling has been diversified in manifolds across the world leading to evolution of newer recycling technique and fresh recycled product. Albeit plastic is one of those waste materials which is getting extremely difficult to get substantially recycled because of its record-breaking production, consumption, and its wide range of variations in properties ultimately leading to substandard recycling status of plastics globally. This seemingly poor status of waste plastics recycling against the gargantuan amount of fresh plastic products being added to consumer stream gives rise to a menacing one directional problem: Plastic Pollution, which is …

Reuse Of Recycled Plastic For Subgrade Treatment, Jerin Tasnim

Civil Engineering Theses - Archive

Disposal of solid waste becomes a global issue due to it contains a large amount of non- degradable polymers and may lead to many environmental issues. With the scarcity of space for landfilling and due to ever increasing cost, finding ways to handle these wastes without endangering the environment is crucial. One of these methods is to use plastic wastes as one of the pavement materials. In this study, a new method of subgrade soil stabilization of pavement is proposed where soil will be stabilized by mixing only plastic with soil for the treatment of subgrade. In order to demonstrate …

Field Monitoring Of Joint-Less Curved Integral Abutment Bridge In Nebraska, Ramin Ziaei, Yusuf Alhowaidi, Chungwook Sim, Jongwan Eun, Seunghee Kim, Chung Rak Song

Nebraska Department of Transportation: Research Reports

The research objective of this project is to study the behavior of the curved full integral abutment bridge designed in Nebraska through field monitoring and numerical simulation to 1) understand and model the complex short-term and long-term behavior of curved integral abutment bridges, 2) evaluate if the details provided in Nebraska (pile embedment over 4 ft into the abutment) can be expanded for wider design and construction practices (longer spans and larger curvature for curved bridges), and 3) better maintain existing full curved integral bridges in Nebraska based on the findings of this study (revise and optimize design, if needed). …

Developing Distributed Real-Time Hybrid Simulation For Dynamic Response Evaluation Of Floating Wind Turbine, Hezha Lutfalla Sadraddin

Dissertations

Floating wind turbine (FWT) has a significant role in producing clean and sustainable energy in unlimited spaces with more steady wind and less cost. The design, construction, and safe operation of FWTs require a deep understanding of their dynamic responses under combined aerodynamic and hydrodynamic loads. Conventional FWT model experiments utilize wave tanks and wind tunnels. However, laboratory size and capacity and the scaling conflicts between the Froude and the Reynold numbers in these coupled wind-wave loading tests impose challenges to replicate dynamic responses of FWT. Alternatively, real-time hybrid simulation (RTHS), which combines numerical simulation and physical experiment of FWT …

Schematic Design And Peer Review Of Gayaza Medical Center And Walk-In Clinic, Abigail Coffing, Alexis Buhr

Architectural Engineering

This report outlines the structural portion of the work done for the Gayaza Medical Center in Kampala, Uganda. This project was funded by HIINGA, an impact fund doing work in Eastern Africa, who tasked an interdisciplinary group of Cal Poly students with developing a preliminary design for the the medical center. The team consisted of Annebel van der Meulen (architecture), Abigail Coffing and Alexis Buhr (structural), and Arley Landis and Brett Shank (construction management). After completing the initial design, the structural team at Cal Poly rejoined the project the following quarter to do a peer analysis of the finalized structural …

Evaluating Pedestrian Service Of The New Super Diverging Diamond Interchange On Three Case Study Sites In Denver, Colorado, Muhammad Tahmidul Haq, Amirarsalan Mehrara Molan, Khaled Ksaibati

Faculty and Student Publications

Ensuring safe and comfortable conditions for pedestrians necessitates specific strategies at intersections and service interchanges where traffic and pedestrians interact in complex ways with other modes of transportation. This study aims to investigate pedestrian performance at the new Super Diverging Diamond Interchange (Super DDI) using real-world locations (i.e., I-225 and Mississippi Ave, I-25 and 120th Ave, and I-25 and Hampden Ave in Denver, Colorado). Three alternative designs, typical DDI, and two versions of Super DDI were considered to make a reasonable comparison with the existing Conventional Diamond Interchange (CDI). A comprehensive series of simulation models (192 scenarios with 960 runs) …

The Bridge Newsletter Winter 2022, Missouri University Of Science And Technology

The Bridge Newsletter

-Missouri S&T CO2 research is rock solid
-Bringing circular economy to construction projects
-Ph.D. graduate wins Fellowship for solar farm protection research
-Rockne presents 2022 Mathes Lecture on ways to evolve engineering education
-Missouri S&T Ph.D. graduate wins $70,000 Laegeler Fellowship for solar farm protection research

The Price Of Longevity - Empirical Evidence From Road Pavements, Hanna Kemaw

Lyles School of Civil Engineering Graduate Student Reports

The vast network of county, city and town roads, represent a big part of public assets in most states and often account for a significant share of the public spending on roads. This spending on local road infrastructure help to build, operate, and preserve such infrastructure and therefore provide critical accessibility and mobility to the residents of counties, towns and cities. With the ever-growing volumes of personal and commercial traffic at local roads, the task of maintaining satisfactory levels of service at local roads has become more challenging, and this issue is exacerbated by limited resources, asset aging, and increasing …

Immobilized Algae For Produced Water Treatment And Desalination, Shibin Nadersha, Ashraf Aly Hassan

Department of Civil and Environmental Engineering: Faculty Publications

Produced water (PW) is the effluent generated during oil mining and extraction. On average, for every barrel of oil, 4-5 barrels of PW are generated worldwide. The presence of various contaminants in PW makes it toxic. Disposal of untreated PW into oceans and water bodies can cause adverse effects on human health and the environment. Taking into account the large volumes of it being generated, and its effects on the environment, proper treatment is required before reuse or disposal. Microalgal treatment is an effective method for the bioremediation and biodesalination of produced water when acclimatized algal biomass is used for …

Bilingual Advantages To The Construction Industry, Miguel A. Duran Jr.

Construction Management

The purpose of this paper is to analyze and emphasize the importance of the Spanish language within the construction industry to construction management students at Cal Poly. Knowledge within another language is also used at an advantage in the industry as it increases one’s value through this key skill, and aids effective team communication on a project. Furthermore, the construction industry is filled with subcontractor’s majority being of Latin-based descent. Though this key skill is not required by companies, this skill can help verbal communication barriers which occur on a project when most subcontractors only speak the Spanish language. Verbal …

Automated Approach For The Enhancement Of Scaffolding Structure Monitoring With Strain Sensor Data, Sayan Sakhakarmi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Construction researchers have made a significant effort to improve the safety of scaffolding structures, as a large proportion of workers are involved in construction activities requiring scaffolds. However, most past studies focused on design and planning aspects of scaffolds. While limited studies investigated scaffolding safety during construction, they are limited to simple cases only with limited failure modes and simple scaffolds. In response to this limitation, this study aims to develop an automated scaffold monitoring approach capable of monitoring large scaffolds. Accordingly, this study developed an automated scaffold safety monitoring framework that leverages sensor data collected from a scaffold, scaffold …

Use Of Harsh-Braking Data From Connected Vehicles As A Surrogate Safety Measure, Nathaniel Patrick Edelmann

Boise State University Theses and Dissertations

Traffic safety may be analyzed with the use of surrogate safety measures, measures of safety that do not incorporate collision data but rather rely on the concept of traffic conflicts. Use of these measures provides several benefits over use of more traditional analysis methods with historical crash data. Surrogate measures eliminate the need to wait for crashes to occur to conduct a safety analysis. The amount of time required for enough crash data to accumulate can be significant, delaying safety analyses. Similarly, these measures allow for safety analysis to be conducted prior to crashes occurring, potentially calling attention to hazardous …

Optimization And Enhancement Of Co2 Sequestration In Industrial Wastes For Environmental Applications, Maisa El Gamal, Ameera F. Mohammad

All Works

This paper explores carbon capture and storage (CCS) through carbide lime waste (CLW), a by-product of acetylene production, under different conditions. This process is specifically designed to provide an onsite waste management solution for several industries that can easily be integrated into existing systems. In addition, the effect of the carbonation process on collected solids morphology and average particle size was studied. The structural and chemical characteristics of the carbonated carbide lime samples were investigated using X-ray diffraction, scanning electron microscopy, TGA analysis, and Raman spectroscopy. The effect of carbonation conditions on the total dissolved solids and change in pH …

Precipitation Trends In North And South Carolina, Usa, Giacomo Moragila, Erika Brattich, Gregory J. Carbone

Faculty Publications

Study region

North and South Carolina, USA.

Study focus

Intense precipitation poses risks to life and property. Its frequency can change in response to global-scale drivers, but its spatial expression can vary seasonally and regionally, and be dependent on how it is measured and what analysis period is used. We investigate forty-four historical stations from the U.S. Historical Climatology Network (USHCN) across North and South Carolina to determine trends in the pluviometric regime defined by the Expert Team on Climate Change Detection and Indices (ETCCDI). New hydrological insights for the region Most of the stations in this area do not …

Effects Of Fibers In Dense Graded And Gap Graded Asphalt Concrete, Franher Daniel Cantu

Theses and Dissertations

As a part of efforts to understand the interactions between fibers and particles in compliant binder such as asphalt. This investigated the compressive behaviors of fiber reinforced asphalt concrete with different aggregate gradation, such as gap graded and dense graded. There have been multiple studies attempting to understand the impact of fibers on particle reinforced composites, however, only few of those focused on the fiber-particle interactions. A comprehensive literature review on the current state of the art of fiber reinforced asphalt concrete and fiber-particle interactions was conducted. Then a series of compression tests were conducted using various size steel fibers …

A Study Of The Constitutive Models Used In Analyzing Dynamic Strain Aging In Austenitic Stainless Steel 304, Mohammad Mohiuddin

Theses and Dissertations

When triggered, dynamic strain aging has a significant impact on the microstructural mechanical behavior of austenitic stainless steel 304 high performance alloy. The dynamic strain aging phenomenon has been shown to cause significant additional hardening in several experimental studies. To effectively predict the behavior of the material, it is required to employ a constitutive model that includes dynamic strain aging. The extra hardness brought on by dynamic strain aging is captured in this study by the proposal of a novel constitutive model (VAS model) for Austenitic Stainless Steel (ASS) 304 high performance alloy. As part of this study, the developed …

Numerical Simulation Of Vibration - Based Piezoelectric Energy Harvester For Shape Comparison, Adriana Rosas

Theses and Dissertations

This work investigates the shape optimization of piezoelectric energy harvesters subjected to mechanical vibration using ABAQUS/Standard software. Three piezoelectric energy harvesters with different dimensions but the same areas were created to identify if model dimensions have an impact on the output voltage. The models were tested at different speeds to create an output voltage. Once the output voltages were obtained, the results were compared with each other to find if shape optimization on piezoelectric energy harvesters has an impact on scavenging energy from mechanical vibrations.

Water Hardness Removal By Electrochemical Precipitation In A Continuous Flow Condition Using Conductive Concrete As Cathode, Tahsin Tareque

Theses and Dissertations

This study focuses on the electrochemical precipitation (EP) process to reduce excess water hardness from the Lower Rio Grande Valley (LRGV) tap water using electrically conductive concrete as cathode in a continuous flow condition. LRGV tap water is extremely hard with hardness more than 350 mg/L as CaCO3. Humans can pleasantly consume water with hardness less than 150 mg/l as CaCO3 according to World Health Organization (WHO). Hard water is also known to cause mechanical problems to boilers and heat exchangers. In this process, electricity is passed through electrodes submerged in electrolyte, which causes an alkaline environment around the cathode …

Shape Deformities In Recycled Concrete As A Substitute Aggregate In Concrete, Carson D. Timmerman

Construction Management

Concrete is a universal material that is used widely across the construction industry. Within a standard concrete mix, a fine aggregate and a coarse aggregate are added to the mix design to help with solidity and compressive strength in the mixture. The admixtures, additives, slump, and mix ratios will differ based on the compressive strength you're trying to attain. This paper directly reflects the results of the differences between shapes in recycled concrete used as a coarse aggregate substitute in concrete mixes. As the construction industry grows, so does outreach towards sustainability and reusing materials anywhere the industry can. Testing …

Addition Of An Internship Prep Course To The Cm Curriculum, Zachary C. Boyle

Construction Management

The Cal Poly Construction Management program does an amazing job giving students opportunities to receive summer internships. Just about every student in the CM program will have some form of summer internship during their time at Cal Poly. All CM classes are designed to prepare students for internships. That being said, there is no specific class within the CM curriculum that is 100% Internship focused. Allowing students an opportunity to take a course that would focus on preparing them for their summer internships, students will be more confident and better equipped to take on the tasks of an intern at …

Prague 2023 Summer Program Project Case Study, Jack T. Sampson

Construction Management

The Prague 2023 Summer Program is a Construction Management based program that allows students to travel abroad to the Czech Republic and increase their Construction Management knowledge. The eight-week program is hybrid and split between four weeks in Prague followed by four weeks of virtual learning. This program contributes to nine units that include: CM-426 International Construction Studies, CM-463 Senior Project, and CM-450 Integrated Project Design and Program Management. The main purposes of this case study were to (1) find and evaluate a construction project to be used for the Prague 2023 Summer Program and (2) create an assignment schedule …

The Current State Of Autonomous Construction Robots And The Challenges Of Adoption, Philip Lang Hu

Construction Management

Autonomous construction robotics is a field of technology that has not traditionally garnered much attention from the mainstream construction industry. The technology has remained relatively under the radar amidst an industry which has yet to experience a fundamental shift in the last several decades. While many industries have found a way to integrate robotics into their everyday functions, the construction industry has yet to standardize the use of robotics on jobsites. Driven by the recent pandemic and subsequent labor shortage, construction robots are now optimally positioned to demonstrate the benefits of flexibility, worker safety, and enhanced productivity and efficiency they …

The Growing Trends In Prefabricated Commercial Construction In The Bay Area, Conner Edgar

Construction Management

With the rise in demand for building greener and more efficient buildings, commercial construction companies, in the San Francisco Bay Area, are constantly finding new methods to keep up with new trends. Prefabricated construction has grown exponentially as a building method over the last decade in the commercial construction industry and continues to evolve and become more efficient. Many companies are resorting to prefabricated construction as it decreases time, expenses, and even the amount of waste on construction jobsites. It is important to realize what the future will hold for prefabricated construction while gaining knowledge of the benefits and disadvantages …

Reality Capture Course Content: Exposing The Next Generation Of Builders To Technology Moving The Industry Forward, Maxwell S. Eisner

Construction Management

This paper discusses the development and execution of lecture and laboratory educational content regarding reality capture technology and workflows. These educational modules were created to cover different use cases for reality capture technology that are currently being used in the construction industry. They also show how reality capture plays a role in the larger virtual design in construction (BIM) process. Importantly, these labs were designed to be completed with the LiDAR scanner on a typical iPhone, which has lowered the barrier to entry for reality capture education and use in industry. While the initial teaching of these courses was done …

Effectiveness Of Suspended Lead Dampers In Steel Buildings Under Localized Lateral Impact And Vertical Pulsating Load, Herish Abdullah Hussein

Civil & Environmental Engineering Theses & Dissertations

Presented herein is a study of the effectiveness of suspended lead dampers for use in steel buildings under a localized impact load and a vertical pulsating load. A series of lead spheres mounted on a string are suspended inside the building columns or damping panels to absorb the energy of vibration through a collision between the lead dampers and internal surfaces of the members. Experiments are conducted on a three-story steel building model and a cantilever member with suspended lead dampers and subjected to localized impact loading. The cantilever under impact load is analyzed with a partial differential equation of …

Flexural Bond Strength Of Masonry Assemblies With Lightweight Grout, Benjamin L. Hiner

All Theses

Lightweight grout has many potential benefits in masonry construction, including minimizing mass, improving thermal performance, and potentially reducing shrinkage cracking via internal curing. However, insufficient testing of masonry assemblies with lightweight grout has been conducted to suggest appropriate design modification factors akin to the lambda factor in ACI 318-19. The objective of this paper is to study the tensile bond behavior of masonry assemblies grouted with lightweight grout and to suggest appropriate equations for predicting design capacity. A moment couple test is designed specifically for grouted masonry assemblies and has additional capacity compared to the traditional ASTM 1072 bond wrench …

Mango Surface Color Features Measurement Using Digital Image Processing, Md Towfiqur Rahman, Goutom Kumar, Md Abdul Momin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Summary

Postharvest processing of agricultural produce is still done the conventional way in Bangladesh. Manual grading of agricultural produce, especially fruits and vegetables, is laborious and costly due to acute shortage of labor during the peak season, as well as difficulty maintaining the product quality. Machine vision system (MVS) applications are widely used nowadays as a non-destructive and cost-effective technology for automatically grading and sorting large volumes of produce in the packing house according to size, shape, color, texture, and surface defects. In this study, a simple MVS was constructed measuring different color features of mango fruit surface as a …

Framework For The Use Of Extended Reality Modalities In Aec Education, Barbara Oliveira Spitzer, Jae Hoon Ma, Ece Erdogmus, Ben Kreimer, Erica Ryherd, Heidi Diefes-Dux

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The educational applications of extended reality (XR) modalities, including virtual reality (VR), augmented reality (AR), and mixed reality (MR), have increased significantly over the last ten years. Many educators within the Architecture, Engineering, and Construction (AEC) related degree programs see student benefits that could be derived from bringing these modalities into classrooms, which include but are not limited to: a better understanding of each of the subdisciplines and the coordination necessary between them, visualizing oneself as a professional in AEC, and visualization of difficult concepts to increase engagement, self-efficacy, and learning. These benefits, in turn, help recruitment and retention efforts …

Sensor Formed From Conductive Nanoparticles And A Porous Non-Conductive Substrate, Erik T. Thostenson, Thomas Schumacher

Civil and Environmental Engineering Faculty Publications and Presentations

In various aspects, the sensors include a substrate that is porous and non-conductive with nanoparticles deposited onto the substrate within pores of the substrate by an electrophoretic process to form a sensor element. The nanoparticles are electrically conductive. The sensor includes a detector in communication with the sensor element to measure a change in an electrical property of the sensor element. The change in the electrical property may result from alterations in quantum tunneling between nanoparticles within the sensor element, in various aspects.