Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 5911 - 5940 of 39957

Full-Text Articles in Engineering

Influence Of Surface Cracking, Anchor Head Profile, And Anchor Head Size On Cast-In Headed Anchors In Geopolymer Concrete, Trijon Karmokar, Alireza Moyheddin Jan 2023

Influence Of Surface Cracking, Anchor Head Profile, And Anchor Head Size On Cast-In Headed Anchors In Geopolymer Concrete, Trijon Karmokar, Alireza Moyheddin

Research outputs 2022 to 2026

In this study, the concrete cone capacity, concrete cone angle, and load–displacement response of cast-in headed anchors in geopolymer concrete are explored using numerical analyses. The concrete damaged plasticity (CDP) model in ABAQUS is used to simulate the behavior of concrete substrates. The tensile behavior of anchors in geopolymer concrete is compared with that in normal concrete as well as that predicted by the linear fracture mechanics (LFM) and concrete capacity design (CCD) models. The results show that the capacity of the anchors in geopolymer concrete is 30%–40% lower than that in normal concrete. The results also indicate that the …

Go to article

A New Volumetric Strain-Based Method For Determining The Crack Initiation Threshold Of Rocks Under Compression, Hao Li, Ruizhi Zhong, Leo Pel, David Smeulders, Zhenjiang You Jan 2023

A New Volumetric Strain-Based Method For Determining The Crack Initiation Threshold Of Rocks Under Compression, Hao Li, Ruizhi Zhong, Leo Pel, David Smeulders, Zhenjiang You

Research outputs 2022 to 2026

The crack initiation stress threshold ( ci) is an essential parameter in the brittle failure process of rocks. In this paper, a volumetric strain response method (VSRM) is proposed to determine the σci based on two new concepts, i.e., the dilatancy resistance state index ( ci) and the maximum value of the dilatancy resistance state index difference (| ci|), which represent the state of dilatancy resistance of the rock and the shear sliding resistance capacity of the crack-like pores during the compressive period, respectively. The deviatoric stress corresponding to the maximum | ci| is taken as the ci . We …

Go to article

Influence Of Soil Fabric On Dynamic Properties Of Sand: An Experimental Study, Arpit Jain, Satyendra Mittal, Sanjay K. Shukla Jan 2023

Influence Of Soil Fabric On Dynamic Properties Of Sand: An Experimental Study, Arpit Jain, Satyendra Mittal, Sanjay K. Shukla

Research outputs 2022 to 2026

Natural field sites originate under the action of external sources such as rivers, wind, or marine environments. These sources are responsible for constituting a variety of soil fabrics, which ultimately modify the deformation characteristics. Additionally, the dynamic properties of a site present the characterization of a region and have been profusely utilized by field engineers and researchers. In the present study, the dynamic properties of soil specimens have been evaluated for specimen preparation techniques, namely, air pluviation (AP) and water sedimentation (WS). The cyclic triaxial tests were conducted on the strain-controlled consolidated undrained specimens at a frequency of 0.1 Hz. …

Go to article

Investigating The Potential Of High-Density Polyethylene And Nano Clay Asphalt-Modified Binders To Enhance The Rutting Resistance Of Asphalt Mixture, Ashraf Abdel-Raheem, Anmar Dulaimi, Ahmed S. Mohamed, Ghada S. Moussa, Yasin O. Özkılıç, Nuha Mashaan, Ramadhansyah P. Jaya, Talaat Abdel-Wahed Jan 2023

Investigating The Potential Of High-Density Polyethylene And Nano Clay Asphalt-Modified Binders To Enhance The Rutting Resistance Of Asphalt Mixture, Ashraf Abdel-Raheem, Anmar Dulaimi, Ahmed S. Mohamed, Ghada S. Moussa, Yasin O. Özkılıç, Nuha Mashaan, Ramadhansyah P. Jaya, Talaat Abdel-Wahed

Research outputs 2022 to 2026

This study investigates the potential of two bitumen modifiers, high-density polyethylene (HDPE) and nano clay (NC), to enhance the rutting resistance of asphalt mixture. Four HDPE asphalt binders were prepared by mixing the HDPE at percentages of 2%, 4%, 6%, and 8% with the virgin binder, while four NC asphalt binders were produced by mixing the NC at percentages of 1%, 2%, 3%, and 4%. The consistency and flow of virgin binder, HDPE binders, and NC binders were evaluated by penetration, softening point, and viscosity tests. The results show a gradual increment in the binder stiffness by increasing the percentage …

Go to article

Thermal Curing Effects On Alkali-Activated Treated Soils With Palm Oil Fuel Ash, Lokmane Abdeldjouad, Wisam Dheyab, Yaser Gamil, Afshin Asadi, Sanjay K. Shukla Jan 2023

Thermal Curing Effects On Alkali-Activated Treated Soils With Palm Oil Fuel Ash, Lokmane Abdeldjouad, Wisam Dheyab, Yaser Gamil, Afshin Asadi, Sanjay K. Shukla

Research outputs 2022 to 2026

Regarding the significance of binder quantity, alkali activator molarities, and thermal curing, this work was utilized to geopolymerize with a potassium-based alkaline activator to strengthen soils. Five different molarities of palm oil fuel ash (POFA) in four different amounts were utilized to activate the clayey soil. POFA admixtures have been used to test soils. The results showed that for mixtures with 10 and 12.5 molarities, the unconfined compressive strength (UCS) with 15 % and 20 % of POFA was stronger. Comparing the strengths of the blends with various POFA amounts and concentration molarities allowed for this determination. To increase the …

Go to article

Conife-Layered Double Hydroxide Decorated Co-N-C Network As A Robust Bi-Functional Oxygen Electrocatalyst For Zinc-Air Batteries, Yasir Arafat, Yijun Zhong, Muhammad R. Azhar, Mohammad Asif, Moses O. Tadé, Zongping Shao Jan 2023

Conife-Layered Double Hydroxide Decorated Co-N-C Network As A Robust Bi-Functional Oxygen Electrocatalyst For Zinc-Air Batteries, Yasir Arafat, Yijun Zhong, Muhammad R. Azhar, Mohammad Asif, Moses O. Tadé, Zongping Shao

Research outputs 2022 to 2026

Rechargeable zinc-air batteries (ZABs) are cost-effective energy storage devices and display high-energy density. To realize high round-trip energy efficiency, it is critical to develop durable bi-functional air electrodes, presenting high catalytic activity towards oxygen evolution/reduction reactions together. Herein, we report a nanocomposite based on ternary CoNiFe-layered double hydroxides (LDH) and cobalt coordinated and N-doped porous carbon (Co-N-C) network, obtained by the in-situ growth of LDH over the surface of ZIF-67-derived 3D porous network. Co-N-C network contributes to the oxygen reduction reaction activity, while CoNiFe-LDH imparts to the oxygen evolution reaction activity. The rich active sites and enhanced electronic and mass …

Go to article

Editorial: Rock Physics Modeling And Well-Log Practice For Unconventional Reservoirs, Qiaomu Qi, Lidong Dai, Maxim Lebedev, Tobias Müller, Junfang Zhang Jan 2023

Editorial: Rock Physics Modeling And Well-Log Practice For Unconventional Reservoirs, Qiaomu Qi, Lidong Dai, Maxim Lebedev, Tobias Müller, Junfang Zhang

Research outputs 2022 to 2026

Unconventional resources with commercial interest in the world mainly include heavy oils, shales, coalbed methane and tight gas sands. The production and development of these resources have changed the supply pattern of global energy. Quantitative interpretation of geophysical data in the exploration, well logging and engineering development of the unconventional resources requires a comprehensive understanding of the physical properties of rocks and their relationships. The research of rock physics provides an interdisciplinary treatment of physical properties, whether it is highly related to geological, geophysical and geomechanical methodologies. The development of new rock physics methods is essential when integrating core, well-log, …

Go to article

Promoting Enhanced Decision-Making And Proactive Management For Modularization In The Construction Industry Using Risk-Based Approach, Analytical Hierarchy Process, And Graph Theory, Mohamad Abdul Nabi Jan 2023

Promoting Enhanced Decision-Making And Proactive Management For Modularization In The Construction Industry Using Risk-Based Approach, Analytical Hierarchy Process, And Graph Theory, Mohamad Abdul Nabi

Doctoral Dissertations

"Modularization is an approach that can potentially mitigate many of the current construction industry’s challenges. Despite the documented advantages of modularization, the industry is still not able to capitalize on its full potential and benefits. The latter is due to the outdated decision-making models that may not reflect the multiple factors involved in modular construction, the unique source of risks associated with modular construction methods, need for continuous improvement, and complex contractual requirements and disputes. As such, the goal is to promote the use of modularization in the construction industry by enhancing decision-making and proactive risk management. The associated objectives …

Go to article

A Network Of Low-Cost Multi-Pollutant Air Quality Sensors For Evaluating Fine-Scale Exposure Disparity In Twin Cities, Mn, P M Varuni Abhayaratne Jan 2023

A Network Of Low-Cost Multi-Pollutant Air Quality Sensors For Evaluating Fine-Scale Exposure Disparity In Twin Cities, Mn, P M Varuni Abhayaratne

Masters Theses

"Poor air quality is detrimental to health and is a leading environmental risk factor for early death globally. The massive scale of urbanization and population growth has led urban air quality to become a global concern as the release of air pollutants into the atmosphere continues to increase. Air quality has traditionally been monitored using reference-grade monitoring stations that are expensive and sparsely distributed. Low-cost sensors can complement existing regulatory networks to provide more spatial detail, capturing fine-scale variations. This study investigates spatiotemporal pollutant patterns, exposure disparities and environmental justice using data collected from a two-year (2019-2021) deployment of a …

Go to article

Selecting Consolidation Procedures For Making Concrete Specimens, Paige Marie Toebben Jan 2023

Selecting Consolidation Procedures For Making Concrete Specimens, Paige Marie Toebben

Masters Theses

"The goal of this research was to reevaluate ASTM C31 Standard Practice for Making and Curing Concrete Test Specimens in the Field, as well as deepen our understanding of the relationship between the consolidation process, concrete composition, and workability. An improved understanding of this area will help to reduce variability in concrete quality. The project involved evaluating the effect of different consolidation methods on concrete specimens with changing levels of workability. To do this, concrete cylinders were created with varying viscosities by adjusting the water-to-cement ratio (w/c) and water-reducing agent. More cylinders were created with varying paste volumes while keeping …

Go to article

Data Driven Method To Assess Safety And Energy On Freeway And Intersection Performance Using Probe Vehicle, Rezwana Kabir Jan 2023

Data Driven Method To Assess Safety And Energy On Freeway And Intersection Performance Using Probe Vehicle, Rezwana Kabir

Wayne State University Dissertations

Traffic congestion in cities is becoming a more pressing issue as travel demand increases, leading to safety and mobility problems and wasteful use of vehicle energy. Both freeways and signalized corridors are important in creating an efficient transportation network, and congestion on these infrastructure types presents a significant mobility concern in the United States. With advances in sensing technologies for intelligent transportation systems, probe vehicles equipped with GPS-enabled devices such as cell phones and in-vehicle telematics or navigation systems are increasingly being used to gather more information about traffic conditions. While fixed point detectors can be limited by their geographical …

Go to article

Privately-Owned Versus Shared Automated Vehicle: The Roles Of Utilitarian And Hedonic Beliefs, Fatemeh Nazari, Yellitza Soto, Mohamadhossein Noruzoliaee Jan 2023

Privately-Owned Versus Shared Automated Vehicle: The Roles Of Utilitarian And Hedonic Beliefs, Fatemeh Nazari, Yellitza Soto, Mohamadhossein Noruzoliaee

Civil Engineering Faculty Publications

Transportation systems will be likely transformed by the emergence of automated vehicles (AVs) promising for safe, convenient, and efficient mobility, especially if used in shared systems (shared AV or SAV). However, the potential tendency is observed towards owning AV as a private asset rather than using SAV. This calls for a research on investigating individuals’ attitude towards AV in comparison with SAV to recognize the barriers to the public’s tendency towards SAV. To do so, the present study proposes a modeling framework based on the theories in behavioral psychology to explain individuals’ preference for owning AV over using SAV, built …

Go to article

Finite Element Analysis Of Compaction Load To Investigate The Stress-Deformation Behavior Of Soil Geosynthetic Composite Mass: A Case Study, Truc Phan, Meen-Wah Gui, Thang Pham Jan 2023

Finite Element Analysis Of Compaction Load To Investigate The Stress-Deformation Behavior Of Soil Geosynthetic Composite Mass: A Case Study, Truc Phan, Meen-Wah Gui, Thang Pham

Civil Engineering Faculty Publications

When building Soil Geosynthetic Composite (SGC) walls, fill compaction is normally carried out by operating a compactor in a general direction parallel to the wall face. In other words, a moving point or area load is often used to apply a compaction load on a newly installed soil lift. Pham (2009) and Wu and Pham (2010) demonstrated that the compaction-induced stress (CIS) caused by multiple passes of a compactor moving toward or away from a section can be calculated by taking into account the compaction load applied directly above the section under consideration using a simplified stress path proposed by …

Go to article

Synergising Bim And Real-Time Data For Improved Efficiency: An Irish Case Study, Ahmed Hassan, Ankur Mitra, Alan Hore, Mark Mulville Jan 2023

Synergising Bim And Real-Time Data For Improved Efficiency: An Irish Case Study, Ahmed Hassan, Ankur Mitra, Alan Hore, Mark Mulville

Conference papers

The evolution of 3D visualisation and the Internet of Things (IoT) presents a substantial opportunity for integrating real-time data with Building Information Models (BIM) to improve its functionality and construction workflow efficiency. Integrating real-time data with BIM can enhance the digital representation of construction buildings’ physical and functional characteristics and provide recordable status of on-site operations. Nevertheless, the integration between Visualisation and IoT technologies with BIM remains in its preliminary stages and faces a myriad of technical and operational challenges. Furthermore, developing advanced solutions to facilitate this complex integration requires a considerable understanding of the viability and feasibility of merging …

Go to article

Challenges And Opportunities For Automating Physical Compliance On Construction Sites, Ankur Mitra, Mark Mulville Jan 2023

Challenges And Opportunities For Automating Physical Compliance On Construction Sites, Ankur Mitra, Mark Mulville

Conference papers

The construction project lifecycle includes several compliance requirements that need to be checked at multiple levels and at different phases of the project. Inability to comply with these regulations due to lack of time and resources or human oversight can affect the project throughout its service lifecycle with the potential for severe outcomes. Following a number of high-profile failings and owing to the high stakes nature of compliance, digitalisation has been introduced in this field of construction over the past few decades to reduce mistakes and neglect. Although the compliance checking process in the design phase has seen significant digital …

Go to article

Capturing The Behaviour Of Volunteer Pedestrians In A Newly-Developed University Campus Using A Distributed Array Of Bluetooth Low Energy Devices, Ahlam Al Anbouri, Mayank Parmar, David Powell, Paula Kelly, Niall Holmes Dr., Damon Berry, Lorraine D'Arcy Jan 2023

Capturing The Behaviour Of Volunteer Pedestrians In A Newly-Developed University Campus Using A Distributed Array Of Bluetooth Low Energy Devices, Ahlam Al Anbouri, Mayank Parmar, David Powell, Paula Kelly, Niall Holmes Dr., Damon Berry, Lorraine D'Arcy

Conference papers

Contemporary public infrastructure projects emphasise sustainable options that integrate pedestrian routes, leisure facilities and convenient access to public transport systems. It is important to understand the effectiveness of these contemporary designs. In the age of the General Data Protection Regulation (GDPR), there is a need to develop technologybased solutions that collect information about the behaviour of pedestrians in public spaces as they commute and engage in leisure pursuits while simultaneously preserving the privacy of these citizens. Bluetooth Low Energy (BLE), has privacypreserving features that make it worth considering as part of a technology solution for studies of this type. This …

Go to article

Indication Of Pedestrian’S Travel Direction Through Bluetooth Low Energy Signals Perceived By A Single Observer Device, Mayank Parmar, Paula Kelly, Damon Berry Jan 2023

Indication Of Pedestrian’S Travel Direction Through Bluetooth Low Energy Signals Perceived By A Single Observer Device, Mayank Parmar, Paula Kelly, Damon Berry

Conference papers

This paper presents a study to understand the directional sensitivity of a Bluetooth Low Energy (BLE) monitoring device (Observer) and whether, using a single such Observer, the characteristics of its antenna can be used to identify the direction of a pedestrian’s movement. To comprehend the directional characteristics of the antenna of the Observer employed for this study, the device is subjected to BLE signals emitted from a BLE beacon (Broadcaster) in an anechoic chamber. The results of this study confirmed that in the clean, noiseless environment of the chamber, the antenna we employed is clearly more receptive to signals emerging …

Go to article

A-Eye Tech: Framework To Evaluate An Ai Construction Visibility Platform, Ahmed Hassan, Alan V. Hore, Mark Mulville Jan 2023

A-Eye Tech: Framework To Evaluate An Ai Construction Visibility Platform, Ahmed Hassan, Alan V. Hore, Mark Mulville

Conference Papers

The authors present the early stages of an Irish government-funded project, A-EYE. This disruptive technology seeks to create a construction visualisation platform that enables measurable productivity advantages through passive data capture and real-time delivery of mission-critical information in an accessible form. The authors outline how they will utilise data captured during construction site operations using camera and sensor equipment to monitor construction resources and processes. Moreover, the positive impact of easy access to visualised data on collaboration between construction stakeholders is discussed. Extensive user-experience research data will be captured after deploying the technology on live projects to create interactive dashboards …

Go to article

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson Jan 2023

Hdd Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony James Robinson

Datasets

In this study, a thermal-economic analysis was conducted to determine the optimum insulation thickness of retrofitted insulation walls in different regions in Ireland. This was based on the Heating Degree Day method (HDD). This dataset contains optimum insulation thickness, payback period, cost savings and carbon emission for all 25 counties in the Republic of Ireland

Go to article

Fem Eem Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr. Jan 2023

Fem Eem Dataset: Optimising Retrofitted Insulation For Irish Residential Building Walls, Rakshit D. Muddu, Aimee Byrne, Anthony Robinson Dr.

Datasets

A large number of combinations of Irish wall types, insulation materials, and heating fuel types were produced to compare the multiple variables which influence Optimal Insulation Thickness values. The total cost (TC) and carbon emission (CE) at optimum insulation thickness (OIT) for all combinations of insulation material and three types of fuel are considered. The dataset presents OIT for solid wall, cavity wall and cavity block wall types located in Monaghan, Dublin, and Kerry.

Go to article

Prediction Of Dynamic Mechanical Behaviors Of Coral Concrete Under Different Corrosive Environments And Its Enhancement Mechanism, Jingjie Wei, Boyuan Cheng, Lixiao Li, Wu Jian Long, Kamal Khayat Jan 2023

Prediction Of Dynamic Mechanical Behaviors Of Coral Concrete Under Different Corrosive Environments And Its Enhancement Mechanism, Jingjie Wei, Boyuan Cheng, Lixiao Li, Wu Jian Long, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The marine structures are usually exposed to dynamic loadings within short periods and chemical attacks, resulting in severe dynamical damage or failure to concrete structures. The study of the time-dependent changes in the dynamic mechanical behavior of coral concrete under different corrosive environments and low-frequency waves is limited. For the safety and reliable use of coral concrete in the marine environment, different corrosion environments (chloride ions, sulfate ions, and mixed chloride-sulfate ions) and low-frequency waves (0.5–2.0 Hz) were designed to evaluate the dynamic properties of concrete. A model considering the effect of corroded age is formulated to predict the damping …

Go to article

Key Factors Affecting Labor Productivity In Offsite Construction Projects, Rayan H. Assaad, Islam H. El-Adaway, Makarand Hastak, Kim Lascola Needy Jan 2023

Key Factors Affecting Labor Productivity In Offsite Construction Projects, Rayan H. Assaad, Islam H. El-Adaway, Makarand Hastak, Kim Lascola Needy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Offsite construction has been shown to possess many advantages and benefits in dealing with the construction industry's challenges, which include poor labor productivity. Nevertheless, all previous productivity-related research studies have focused mainly on factors impacting labor productivity in traditional stick-built construction methods. This paper filled this knowledge gap by following a multistep interrelated research methodology. First, a research team of 19 construction professionals and academics developed and distributed an industry survey to (1) quantify the likelihood of occurrence and relative impact of risk factors that adversely impact labor productivity in offsite construction projects; (2) identify and prioritize key risk factors …

Go to article

Identifying Design-Build Decision-Making Factors And Providing Future Research Guidelines: Social Network And Association Rule Analysis, Ramy Khalef, Islam H. El-Adaway Jan 2023

Identifying Design-Build Decision-Making Factors And Providing Future Research Guidelines: Social Network And Association Rule Analysis, Ramy Khalef, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

There is a dire need to rebuild existing infrastructure with strategic and efficient methods. Design-build (DB) becomes a potential solution that provides fast-tracked delivery as a more time and cost-efficient project delivery method. Past research studied factors influencing DB but without providing a holistic analytic approach. This paper fills this knowledge gap. First, a systematic literature review is performed using the preferred reporting items for systematic reviews and meta-analyses techniques, and a set of factors affecting DB projects are then identified and clustered, using k-means clustering, based on the whole literature discussions. Second, a graph theory approach, social network analysis …

Go to article

Extending The Nno Ballistic Limit Equation To Foam-Filled Dual-Wall Systems, William P. Schonberg Jan 2023

Extending The Nno Ballistic Limit Equation To Foam-Filled Dual-Wall Systems, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A key component in the quantitative assessment of the risk posed to spacecraft by the micrometeoroid and orbital debris (MMOD) environment is frequently referred to as a ballistic limit equation (BLE). A frequently used BLE for dual-wall configurations (which are commonly used on spacecraft to protect them against the MMOD environment) is the New Non-Optimum, or "NNO", BLE. In design applications where a BLE is needed for a new structural system that has not yet been tested, but resembles to a fair degree a dual-wall system, it is common practice to equivalence the materials, thicknesses, etc., of the new system …

Go to article

Walkable Neighborhoods: Linkages Between Place, Health, And Happiness In Younger And Older Adults, Kevin M. Leyden, Michael J. Hogan, Lorraine D'Arcy, Brendan Bunting, Sebastiaan Bierema Jan 2023

Walkable Neighborhoods: Linkages Between Place, Health, And Happiness In Younger And Older Adults, Kevin M. Leyden, Michael J. Hogan, Lorraine D'Arcy, Brendan Bunting, Sebastiaan Bierema

Articles

Problem, research strategy, and findings: We examined whether living in a walkable neighborhood influenced the happiness of younger and older city residents. The data for this study came from a comprehensive household population survey of 1,064 adults living in 16 neighborhoods in Dublin City (Ireland) and its suburbs. We used multigroup structural equation modeling to analyze the direct and indirect effects of walkability on happiness, mediated by health, trust, and satisfaction with neighborhood appearance. We found living in a walkable neighborhood was directly linked to the happiness of people aged 36 to 45 (p¼.001) and, to a lesser extent, those …

Go to article

Environmental Efficiency Assessment Of Dublin Port Using Two-Stage Non-Radial Dea Model, Boban Djordjević, Raja Maitra, Bidisha Ghosh Jan 2023

Environmental Efficiency Assessment Of Dublin Port Using Two-Stage Non-Radial Dea Model, Boban Djordjević, Raja Maitra, Bidisha Ghosh

Articles

Global maritime trade has reached 11 billion tons and accounts for more than 80% of global merchandise trade (United Nations Conference on Trade & Development (UNCTAD), 2019). As a result, there is a wide range of vessels, from very large bulk carriers (coal, ores, grains, etc., and crude oil/refinery carriers) to container ships to various cruise ships and naval vessels. To efficiently accommodate these various vessels, ports have had to evolve from wharves to efficient logistical hubs within the larger supply chain that move vessels deeper into the hinterland. Port development is critical to managing the growing volume of cargo …

Go to article

Variation Of Moisture Content And Temperature Under The Road Shoulder Improved With Wicking Geotextile, Javad Galinmoghadam, Xiong Zhang Jan 2023

Variation Of Moisture Content And Temperature Under The Road Shoulder Improved With Wicking Geotextile, Javad Galinmoghadam, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Several Pavement Distresses Are Associated with Excess Water in the Pavement System. Hence, Controlling Subsurface Water is Crucial to Pavement's Long-Term Performance. Improving Pavement Drainage is Commonly Used to Control the Water Content in Pavement Layers. Conventional Drainage Systems Can Work under Saturated Conditions but Cannot Effectively Drain Capillary Water. a New Type of Wicking Geotextile Has Been Developed that Can Drain Water under Both Saturated and Unsaturated Conditions. in This Study, the Performance of This New Type of Geotextile in Draining Water from a Paved Road Shoulder is Evaluated. a Full-Scale Test Section Along Interstate 44 Was Constructed and …

Go to article

Efficient And Accurate Coded Target Decoding For 3d Reconstruction Of Soil Specimens In Triaxial Test, Xiaolong Xia, Xiong Zhang Jan 2023

Efficient And Accurate Coded Target Decoding For 3d Reconstruction Of Soil Specimens In Triaxial Test, Xiaolong Xia, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Coded Targets Have Been Widely Used for Solving the Corresponding Problem in Photogrammetry for High-Accuracy Three-Dimensional Measurements. Accurate and Efficient Recognition and Identification of Coded Targets Are of Great Importance in Coded Target-Based Photogrammetry. in This Paper, an Efficient and Accurate Method for Coded Target Decoding Was Developed. in This Method, Blob Analysis Was Performed to Recognize the Coded Targets. Then, Image Processing, the RANSAC Algorithm, and the Interpolation Technique Were Applied Respectively to Decode the Coded Targets, Identify Falsely Identified Coded Targets, and Recover Missing Coded Targets. Interpolation Was Also Performed on the Membrane, Which Can Significantly Increase the …

Go to article

Hardware-In-The-Loop And Digital Twin Enabled Autonomous Robotics-Assisted Environment Inspection, Johnny Li, Bo Shang, Iresh Jayawardana, Genda Chen Jan 2023

Hardware-In-The-Loop And Digital Twin Enabled Autonomous Robotics-Assisted Environment Inspection, Johnny Li, Bo Shang, Iresh Jayawardana, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Empowered by the advanced 3D sensing, computer vision and AI algorithm, autonomous robotics provide an unprecedented possibility for close-up infrastructure environment inspection in an efficient and reliable fashion. Deep neural network (DNN) learning algorithms, pretrained on the large database can empower real-time object detection as well as fully autonomous, safe robotic navigation in unstructured environments while avoiding the potential obstacle. However, the development and deployment of the robots, inspection planning and operation procedures are still tedious and segmented with tremendous manual intervention during environmental inspection and anomaly monitoring. The proposed digital twin approach is able to provide a virtual representation …

Go to article

Evaluation Of Thermal And Rheological Properties Of Phase Change Material-Incorporated Asphalt Mastic With Porous Fillers, Farshad Saberi Kerahroudi, Yizhuang David Wang, Jenny Liu Jan 2023

Evaluation Of Thermal And Rheological Properties Of Phase Change Material-Incorporated Asphalt Mastic With Porous Fillers, Farshad Saberi Kerahroudi, Yizhuang David Wang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Incorporating phase change material (PCM) into paving materials can regulate the pavement temperature, improve the pavement durability, and mitigate the heat-island effects. In this research, porous fillers were used as the PCM carrier, and the thermal and rheological behaviors of the asphalt mastic with the PCM were evaluated. Two different carrier materials (diatomite and expanded perlite) and four types of PCMs were used in the study. The candidate filler, PCM, and proper blending ratios were determined based on the results of scanning electron microscope image analysis, the filter paper test, and the temperature sweep test. The thermal and rheological behaviors …

Go to article

First Prev Next Last