Engineering Commons^™

Distribution Characteristics Of Internal Distress And Maintenance Decision-Making For Asphalt Pavement Based On Three-Dimensional Ground-Penetrating Radar, Li Xiaohua, Song Liang, Ye Wei, Xie Xiaodong, Yang Jiangang, Gao Jie

Journal of China & Foreign Highway

The distribution characteristics of internal distress in pavement structures and the corresponding maintenance decisions are crucial for improving road performance and extending service life.Based on three-dimensional ground-penetrating radar (3D GPR ) technology,this study investigated the internal distress of a 12-kilometer section of both driving and overtaking lanes of an expressway in Hubei Province.High-resolution images of internal pavement distress were obtained,and milling maintenance decisions were optimized by employing these images and a modular decision-making model.Through an efficient and non-destructive technique,the distribution characteristics of internal pavement distress were analyzed,and potential distress types were identified,providing a scientific basis for maintenance decision-making.Data analysis revealed …

Integrated Decision Support System For Optimizing Time And Cost Tradeoffs In Linear Repetitive Construction Projects, Ahmed Gouda Mohamed, Ali Hassan Ali, Ahmed Adel Abdelhady

Civil Engineering

No abstract provided.

Integrated Decision Support System For Optimizing Time And Cost Trade Offs In Linear Repetitive Construction Projects, Ahmed Gouda Mohamed

Civil Engineering

time and cost performance. Traditional scheduling techniques often struggle to effectively address these complexities. This paper aims to enhance project optimization by introducing a metaheuristicbased Time-Cost Trade-off (TCT) framework specifically designed for repetitive project environments. Unlike previous studies that focus solely on single-algorithm applications, this research evaluates two metaheuristic optimization strategies—Genetic Algorithm (GA) and Particle Swarm Optimization (PSO)—within a consistent problem setting. The framework employs both algorithms, which are independently assessed for their effectiveness in tackling the Linear Repetitive Project Time-Cost Trade-off (LRPTCT) problem. The methodology utilizes task decomposition alongside the Line of Balance (LOB) scheduling technique, facilitating a more …

Life Cycle Costs Of The Little Cottonwood Canyon Transportation Scenarios Under Varied Economic Conditions And Analysis Periods, Emma Reeves, Dane Richards, Darrell Sonntag

Faculty Publications

Abstract— This study revisits the life cycle cost analysis (LCCA) of the Utah Department of Transportation’s (UDOT) proposed gondola project, using recommended best practices for selecting the discount rate, life cycle periods, and conducting a sensitivity analysis on cost projections. We reanalyze the life cycle costs of the five alternatives in the Environmental Impact Statement (EIS) (Scenario 1) across different economic scenarios, and subsequently, we reanalyze the life cycle costs of the Scaled Enhanced Bus (Scenario 2) and Enhanced Bus to Gondola (Scenario 3) from UDOT’s Revised LCCA, using construction dates in the record of decision (ROD) and considering various …

Effect Of Cage Eccentricity On Moment Capacity Of Drilled Shafts, Jason Schaefer Steinbach

USF Tampa Graduate Theses and Dissertations

During the construction of drilled shafts, reinforcement cages can be inadvertently placed eccentrically. Current codes, such as ACI 318 and AASHTO LRFD Bridge Specifications, assume there is little impact from such movements within the drilled shaft or that cage centering provisions are sufficiently robust. This thesis will explore the impact that reinforcement cage eccentricity has on the bending capacity of drilled shafts and propose new strength reduction and resistance factors for tension-controlled failure in drilled shafts.

A total of 208 drilled shafts across eleven counties within the state of Florida were tested using thermal integrity profiling to identify the worst …

Examining Green And Chemical Methods For Zero-Valent Iron Nanoparticle Synthesis In Heavy Metal Adsorption, Juan Ferro-Falla, Lewis Stetson Rowles, Farith Diaz Arriaga, Jaime Plazas-Tuttle

Civil Engineering & Construction: Faculty Publications

The increasing concern over heavy metal contamination in water has necessitated the development of sustainable and efficient treatment methods. This study compares two synthesis approaches for zero-valent iron nanoparticles (nZVI) for cadmium, chromium, and arsenic removal: chemical reduction using sodium borohydride and green synthesis utilizing cocoa husk extracts combined with hydrothermal carbonization (HTC). Chemically synthesized nZVI exhibited high initial removal efficiencies (>98%), though desorption effects occurred over time due to particle aging. In contrast, green-synthesized nZVI, stabilized by a carbon matrix, maintained consistent removal efficiencies above 98% for 120 h under acidic conditions, showcasing superior stability and reactivity. Characterization …

Quantifying Wellbore Effects During Co2 Sequestration In A Saline Aquifer, Uzoma Johnpaul Ajugwe

USF Tampa Graduate Theses and Dissertations

Carbon capture and storage (CCS) is a strategy for mitigating climate change by reducing greenhouse gas emissions from large stationary sources like fossil-fuel-fired power stations. One method of CCS involves carbon dioxide (CO2) sequestration in deep saline aquifers, where supercritical CO2 is injected into an aquifer. The success of such projects depends on accurate predictions of CO2 behavior within the subsurface, which are obtained through numerical simulations.

TOUGHREACT, a renowned simulation tool, models subsurface fluid flow, geochemical interactions, and solute transport, providing insights into the feasibility of CO2 sequestration projects. A critical aspect of these simulations is the apportioning of …

Practicality Of Implementing Sub-Clause 8.4 [Advance Warning] Of The Fidic 2017 Red Book In Egypt, Gehad Ibrahim

Theses and Dissertations

Disputes in construction projects can cause cost and time overruns that can be detrimental to the parties involved and to the project. Several measures have been advocated by the industry’s practitioners in an attempt to avoid disputes and their adverse impacts. One of these measures is the introduction of advance warning sub-clauses in construction contracts, where the contracting parties play a proactive and collaborative role in warning each other of potential adverse impacts to the project. Such clauses have been in the NEC suite of standard construction contracts for decades and have recently found their way to the 2017 edition …

Wireless In-Situ Slurry Testing Device, Andrew Ward

USF Tampa Graduate Theses and Dissertations

Deep foundations are a critical piece of infrastructure used in bridge and high-rise constructions. A type of deep foundation called a drilled shaft is commonly used for these types of large structures due to their ability to resist large axial and lateral loads. Excavations in many soils require hole stabilization methods often involving drilling fluids like polymer or bentonite slurries. When used properly, these slurries prevent groundwater intrusion and side wall sloughing into the excavation. Slurry specifications are set by local or state jurisdictions, research findings, or product manufacturers. Over the years, the Florida standard specifications on slurry integrity testing …

Mining Waste Materials In Road Construction, Nuha Mashaan, Bina Yogi

Research outputs 2022 to 2026

Resource depletion and environmental degradation have resulted from the substantial increase in the use of natural aggregates and construction materials brought on by the growing demand for infrastructure development. Road building using mining waste has become a viable substitute that reduces the buildup of industrial waste while providing ecological and economic advantages. In order to assess the appropriateness of several mining waste materials for use in road building, this study investigates their engineering characteristics. These materials include slag, fly ash, tailings, waste rock, and overburden. To ensure long-term performance in pavement applications, this study evaluates their tensile and compressive strength, …

Maximising Solar Pv Potential: A Comprehensive Review Of Factors Affecting Photovoltaic Installation And Generation In A Mild Temperate Oceanic Climate, Aiza Ahmad, Niamh Power, Evan Finnegan

Publications

The urgency of addressing the climate emergency and clean energy transitions have spurred worldwide initiatives to increase utilisation of renewable energy sources. The integration of rooftop photovoltaic panels at domestic level, often underestimated, is a priority across Europe to meet targets of net-zero emissions by 2050. PV systems represent a crucial technology for renewable energy generation and mitigating climate change. However, their performance and potential are influenced by various factors, including environmental conditions, building parameters and geographical factors. This paper demonstrates multiple factors that affect PV potential in mild temperate oceanic climates, using Ireland as a representative case study. Unlike …

Multi-Parameter Optimization Of Brine Desalination Using Machine Learning, Elaf Mman Seif

Theses and Dissertations

Air Gap Membrane Distillation (AGMD) is a promising desalination technology with significant potential for addressing global water scarcity. However, the interplay of operational parameters significantly impacts its performance, making optimization a challenging task. This research focuses on brine desalination as a means to mitigate the negative environmental impacts of brine disposal which will eventually help in provide a sustainable solution for handling brine while producing freshwater. The study seeks to develop a predictive model and optimize the AGMD process for efficient brine desalination. To achieve this, Response Surface Methodology (RSM) and Artificial Neural Networks (ANNs) were utilized to develop predictive …

Investigating The Properties Of Eco-Bricks Composed Of Sawdust, Bamboo, And Varying Composition Of Sugarcane Bagasse Ash And Portland Cement, Wilfred Victor C. Marasigan, Julia Sophia Antonia S. Encarnacion, Czyrus Michael A. Bajeta, Alijah F. Gonzales, Juan Carlo T. Gumangan

Sinaya: A Philippine Journal for Senior High School Teachers and Students

With the construction industry contributing nearly 40% of global greenhouse gas emissions, there is a growing need for innovative and sustainable building materials. This research investigates a new eco-friendly concrete brick incorporating sugarcane bagasse ash (SCBA), sawdust, and bamboo fibers. Three eco-brick mixtures, each containing 2% bamboo fiber and 10% sawdust by weight but with varying proportions of Portland cement (PC) and SCBA, were tested against a standard brick for compressive strength, flexural strength, and water absorption. The optimal mixture, with 2% bamboo fiber by weight, 10% sawdust by weight, 85% PC, and 15% SCBA, exhibits compressive and flexural strength …

Hybrid Pvt Integrated Pyramid Solar Still: 11e, Sustainability, And Sustainable Development Goals Assessment, Md Shahriar Mohtasim, Md Golam Kibria, Md Mahamudul Hasan Pranto, Barun K. Das

Research outputs 2022 to 2026

Photovoltaic thermal (PVT) integrated solar stills (SSs) can address the challenges associated with electricity scarcity and water desalination. The experiment encompasses a synergistic approach of delivering the heated fluid from the PVT with phase change materials (PVT/PCM) and PVT integrated hybrid nano-materials with fin (PVT/HNPCM/Fin) setups to the water basin of the modified pyramid SSs for enhancing the evaporation rate. A comprehensive analysis is conducted on the impact of hollow circular fins, black sand, hybrid nano-particles with PCM and sponge in SS cases. For PVT scenarios, the effects of hybrid nano-enhanced PCM and fins in serpentine copper pipe layout at …

An Llm Approach For Automating The Analysis Of Bim (Ifc) Data, Miral Selim

Theses and Dissertations

This thesis introduces a novel methodology for automating the analysis of Building Information Modeling (BIM) data using LangGraph, an advanced extension of the LangChain framework, and integrating Google’s Gemini Large Language Model (LLM) with IfcOpenShell. BIM, and specifically Industry Foundation Class (IFC) files, are widely used in the construction industry for representing and managing building data. However, analyzing this data effectively remains a significant challenge due to its volume and complexity. Additionally, analyzing BIM data typically requires knowledge of different BIM software depending on the application. This research addresses this challenge by creating a workflow that utilizes LangGraph’s ability to …

Optimization Of Pile Construction Sequence Using Cfa Machines, Omar Wael Ammar

Theses and Dissertations

In most construction projects with deep foundations, piling activities are critical to the project schedule and often fall on the critical path. The piling construction process requires a diverse range of resources, including equipment, materials, and skilful labour. Without carefully planning the construction process according to installation standards, there is a significant risk of time and cost overruns. These overruns are caused by inefficiencies such as equipment idle or lost time due to required lags between closely spaced piles. Therefore, it is essential to develop an optimized construction sequence to minimize these risks and enhance overall project efficiency. The primary …

Predictive Analysis Of Crash Severity And Modeling Of 85th Percentile Speed For Rural Highways Of Arkansas Using Artificial Intelligence (Ai), Sagun Basel

Student Theses and Dissertations

Crash severity is a significant aspect of transport safety as its contributing factors assist engineers and designers in designing safer roads. The focus of this project is to predict crash severity, analyze crash parameters, and modeling of the 85th percentile speed (V85) selected rural roads (i.e., Interstate-555, East Johnson Avenue Highway, and Red Wolf Blvd) in Arkansas, using Artificial Neural Network (ANN) models. MATLAB® was used to predict the V85 and compare it with the actual V85 collected from field instrumentation. Besides the speed data, weather (e.g., rainfall), road geometry, light conditions, and traffic volume were used as input in …

Optimizing The Use Of Sustainable Additives In Subgrade Soil Stabilization, Orchi Mallick

Student Theses and Dissertations

Subgrade soil critically impacts pavement lifespan, where poor conditions lead to premature failure. This study evaluates soil stabilization of AASTHO classified, A-4 and A-6 soil, using sustainable additives: Rice Husk Ash (RHA), Reclaimed Fly Ash (RFA), and a traditional stabilizer Hydrated Lime (HL). Laboratory tests (Atterberg Limits, Modified Proctor, California Bearing Ratio (CBR), and Free Swell) were conducted on untreated and treated soils with RHA (3%, 6%, and 9% by weight), HL (1%, 3%, and 5% by weight), RFA (4%, 6%, and 8% by weight), and combinations of HL + RHA. Results showed all stabilizers improved strength and reduced swell. …

Towards A Robust Hydrologic Data Assimilation System For Hurricane-Induced River Flow Forecasting, Peyman Abbaszadeh, Fatemah Gholizadeh, Keyhan Gavahi, Hamid Moradkhani

Civil and Environmental Engineering Faculty Publications and Presentations

The Hybrid Ensemble and Variational Data Assimilation framework for Environmental Systems (HEAVEN) is a method developed to enhance hydrologic model predictions while accounting for different sources of uncertainties involved in various layers of model simulations. While the effectiveness of this data assimilation in forecasting streamflow has been proven in previous studies, its potential to improve flood forecasting during extreme events remains unexplored. This study aims to demonstrate this potential by employing HEAVEN to assimilate streamflow data from United States Geological Survey (USGS) stations into a conceptual hydrologic model to enhance its capability to forecast hurricane-induced floods across multiple locations within …

Enhancing Gpr Reliability For Concrete Infrastructure: Integrating Signal Processing And Deep Learning For Defect And Corrosion Assessment, Priyam Chowdhury

Theses and Dissertations

This research addresses the critical issue of deteriorating civil infrastructure by utilizing GPR integrated with advanced signal processing and machine learning. Employing the Conquest 100 system, four concrete slab configurations were tested: multi-layer rebar with defects, single- and double-layer rebar setups, varied rebar spacing, and pre-corroded rebars (0–30% mass loss). GPR B-scans collected over 3–60 days demonstrated that detection accuracy varied significantly with curing time, structural complexity, and moisture levels. A custom-developed Python script surpassed EKKO_Project software in rebar localization, achieving lower position errors (0.4–0.7 inches compared to 0.5–1.25 inches). Notably, the amplitude of GPR signals unexpectedly increased with corrosion …

Heat Pumps And Sustainable Building Operations: An Analysis Of Energy Efficiency, Emissions, And Life Cycle Costs, Mahdiyeh Zafaranchi

Theses and Dissertations

Heating, ventilation, and air conditioning (HVAC) systems are a major contributor to energy demand. Heat pump technologies, particularly Ground Source Heat Pumps (GSHPs) and Air Source Heat Pumps (ASHPs), have emerged as key solutions to reduce energy use worldwide. However, their adoption is challenged by economic, operational, and environmental trade-offs. This dissertation develops a comprehensive framework for evaluating the energy efficiency, lifecycle emissions, and cost-effectiveness of GSHP and ASHP systems in sustainable building operations. Through advanced energy modeling, lifecycle assessments (LCA), and lifecycle cost (LCC) analyses, this research provides data-driven insights to optimize heat pump system selection. This study is …

Treatment And Activation Effects On Kaolinite-Based Earth Concrete, Mojtaba Kohandelnia, Maroua Zerzouri, Ammar Yahia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Self-consolidating earth concrete (SCEC) addresses the long construction process of conventional earthen constructions and their structural limitations, while further efforts are needed to enhance its sustainability. This study explores the development of a kaolinite-based self-consolidating earth paste (SCEP) due to their blended powder system, incorporating raw and treated (calcined and ground-calcined) kaolinite under various activation techniques, such as water hydration, sodium hexametaphosphate (NaHMP), and sodium hydroxide (NaOH) activation. The synergistic effect of calcination and mechanosynthesis on rheological, mechanical, structural, and microstructural properties of SCEP were investigated. Mechanically treated kaolinite increased yield stress, plastic viscosity, storage modulus evolution, and build-up index, …

Revit Walasee: An Auto-Generated In-Wall Revit Model, Ally Delgado, Andrew Kimball, Calianna Collins, Yi Qian Goh

Computer Science and Engineering Senior Theses

The Revit WalaSee is a software-hardware integration tool designed to make building renovations smarter and more sustainable. In the construction industry, rework and demolition make up a large part of global construction waste and carbon emissions, largely due to the lack of internal wall documentation in older buildings. Our project addresses this issue by developing the pipeline between the Walabot wall scanner, a handheld device that detects hidden elements behind drywall, and Autodesk Revit, a widely used platform for Building Information Modeling (BIM).With the Revit WalaSee, someone without extensive technical training could scan any wall and produce accurate 3D modelling …

Exploring Sustainable Practices In Educational Buildings During The Project Lifecycle In Egypt, Abdallah Awny, Youssef A. Awad, Hosam Hegazy, Ibrahim Mahdi

Future Engineering Journal

Sustainable construction approaches are essential for mitigating environmental concerns and enhancing energy efficiency in educational facilities. This research examines sustainability solutions in Egyptian educational institutions, concentrating on the design, building, and operating stages. The study combines quantitative and qualitative assessments from a survey of 66 industry experts, evaluating essential sustainability criteria like energy efficiency, water conservation, material sustainability, and operating expenses. Statistical methods, such as the Relative Importance Index (RII) and correlation analysis, were used to assess the relevance and interrelations among sustainability factors. The findings reveal that energy efficiency (RII: 0.82) and the promotion of health and well-being (RII: …

Centralized, Decentralized And Hybrid Wastewater Management Approaches – Gap Study, Zeyad Kadry, Ahmed M. Ebid Dr., Ibrahim Mahdi

Future Engineering Journal

This literature review highlights advancements in wastewater management, emphasizing hybrid systems that integrate centralized and decentralized approaches. It underscores the cost-effectiveness and scalability of decentralized wastewater management (DWWM) for small urban and rural areas, despite higher land and capital needs. Optimization frameworks utilizing advanced computational tools, such as genetic algorithms and GIS, have proven effective in reducing costs and enhancing resource recovery, with decision-support frameworks tailored for rural planning. The integration of synergistic technologies like vertical farming and photovoltaic energy enhances the sustainability and resilience of decentralized systems in urban contexts. Additionally, innovative treatment methods, including nano-disinfection and advanced coagulation, …

Highway-Transportation-Asset Criticality Estimation Leveraging Stakeholder Input Through An Analytical Hierarchy Process (Ahp), Kwadwo Amankwah, Sarah Hernandez, Suman Kumar Mitra

Civil Engineering Faculty Publications and Presentations

Transportation agencies face increasing challenges in identifying and prioritizing which infrastructure assets are most critical to maintain and protect, particularly amid aging networks, limited budgets, and growing threats from climate change and extreme events. However, existing prioritization approaches often lack consistency and fail to adequately incorporate diverse stakeholder perspectives. This study develops a systematic, stakeholder-informed method for ranking transportation assets based on their criticality to the overall transportation system. As a novel approach, we use the analytical hierarchy process (AHP) and present a case study of the applied approach. Six criteria were identified for ranking assets: annual average daily traffic …

Study Of Capital And Operation Costs For Reverse Osmosis Desalination Plants, Habiba Mahdy Mohamed

Theses and Dissertations

Desalination is a progressively common solution to supply freshwater in numerous parts of the globe where this resource falls short. Among all desalination techniques, seawater reverse osmosis (SWRO) is the most globally prevalent technology. Evaluating a desalination technology's cost-effectiveness is essential to ensure a well-designed plant can be implemented successfully and within an acceptable budget. In the Egyptian context, where water scarcity heightens the urgency of effective resource allocation, economic indicators such as capital expenditure (CAPEX) and operational expenditure (OPEX) are pivotal in shaping policy and planning decisions. Adopting this integrated financial perspective ensures that desalination projects are not only …

Development Of Aldot's Worker Safety Assessment, Risk Identification, And Control Program, Lana Marji

All ETDs from UAB

This research examines the safety challenges faced by Transportation Maintenance Technicians (TMTs) at the Alabama Department of Transportation (ALDOT). By ana-lyzing extensive injury data from 2009 to 2024, along with insights from surveys and interactions with ALDOT personnel, this effort highlights significant trends and relation-ships among injury characteristics such as nature, cause, source, and affected body parts. The findings reveal considerable costs and productivity losses associated with common injury types that warrant the need for targeted interventions. By reviewing successful safety programs across various state Departments of Transportation (DOTs), the study identifies opportunities to enhance safety within ALDOT. This effort …

Minimum Ghg Emissions And Energy Consumption Of U.S. Pet And Polyolefin Packaging Supply Chains In A Circular Economy, Utkarsh S. Chaudhari, Abhishek Patil, Tasmin Hossain, David Watkins, Damon S. Hartley, Barbara K. Reck, Robert Handler, Anne T. Johnson, Vicki S. Thompson, David Shonnard

Michigan Tech Publications

There is a wide agreement on the urgency of transforming linear management of plastics towards a circular economy model. However, no clear pathways exist as to required recycling technologies involved and system-wide environmental impacts. This study explores such pathways in the U.S. for the most commonly used packaging plastics through a combination of mechanical and emerging advanced recycling technologies. A system optimization model aimed at minimizing environmental impacts was developed to determine optimal end-of-life (EOL) management and locations of existing and emerging U.S. recycling infrastructures. Our study includes material flows from virgin resin production through semi-manufacturing processes to existing EOL …

Caed Shop Entrance Wall Redesign, Ellen Elizabeth Untalan, Joelle Schalesky, Katherine Evalyn Timbes

Architectural Engineering: Graduate Reports

This project involved the replacement and redesign of the north wall at the CAED Support Shop at Cal Poly, San Luis Obispo. The redesign aligned the wall with the adjacent Engineering West building. The original concrete wall was designed with jagged recesses to accommodate large trash bins. These recesses no longer serve their intended function due to the permanent relocation of these bins. The replacement CMU low lift grouted wall optimizes courtyard space, enhances aesthetic cohesion, and maintains architectural features consistent with the existing structure. The following report outlines the process necessary to complete this project, including the permitting process, …