Engineering Commons^™

Rethinking Green Building Development Through Policy And Operational Metrics: Insights From Baton Rouge And Beyond, Oluwafemi Awolesi

LSU Doctoral Dissertations

This dissertation explores the challenges and opportunities associated with the development, adoption, and performance of green buildings in regions with relatively low certification uptake, drawing insights from Baton Rouge and its parish system as a case study. It addresses three primary research questions: (1) How can the adoption rate of green buildings be enhanced? (2) How do certified buildings perform compared to their non-certified counterparts? (3) What operational metrics can be applied to better evaluate building performance in the future?

Using a mixed-methods approach, the study examines stakeholder perceptions in East Baton Rouge, Louisiana, investigates energy performance, indoor environmental quality, …

Empirical Analysis Of Incentivized Energy Assessment Recommendations And Iiot Cost-Effectiveness In U.S. Smes, Fatemeh Ghafari

LSU Master's Theses

The industrial sector in the United States accounted for 33% of total energy consumption in 2022. Small and medium-sized enterprises (SMEs), which comprise 99.9% of U.S. businesses present a critical opportunity for energy efficiency improvements. Although energy audits provide actionable Assessment Recommendations (ARs) to reduce consumption, high implementation costs remain a key barrier to adoption.

While prior studies have explored rebate programs, most are limited to residential and commercial sectors or focus narrowly on specific technologies or geographic areas for the industrial sector. The objective of this study is to empirically investigate the “Incentivized Assessment Recommendation” (IAR) trends and to …

Fresh And Mechanical Properties Of Self-Compacting Concrete Using Kaolin Limestone Blend And Hybrid Slag Blend, Selesca Devi S

Theses and Dissertations

This study examined the consequences of mono and hybrid natural fibers on the mechanical and fresh properties of self-compacting concrete (SCC), in response to the growing demand for environmentally friendly building materials. In mono fiber, Abaca fiber (AF) at 0.25% and 0.5% dosage, basalt fiber (BF) from 0.25% to 2% at 0.25% increments, and sisal fiber (SiF) from 0.25% to 1.5% at 0.25% increments were evaluated through slump flow diameter, T500, compressive and tensile strength. AF at 0.25% ensured good flow with 6.6% and 4.16% higher compressive and tensile strength over 0.5% AF. SiF up to 1% improved strength but …

Enhancing Winter Climate Simulations Of The Great Lakes: Insights From A New Coupled Lake–Ice–Atmosphere (Cliav1) System On The Importance Of Integrating 3d Hydrodynamics With A Regional Climate Model, Pengfei Xue, Chenfu Huang, Yafang Zhong, Michael Notaro, Miraj Kayastha, Xing Zhou, Chuyan Zhao, Christa Peters-Lidard, Carlos Cruz, Eric Kemp

Michigan Tech Publications

The Laurentian Great Lakes significantly influence the climate of the Midwest and Northeast United States due to their vast thermal inertia, moisture source potential, and complex heat and moisture flux dynamics. This study presents a newly developed coupled lake–ice–atmosphere (CLIAv1) modeling system for the Great Lakes by coupling the National Aeronautics and Space Administration (NASA) Unified Weather Research and Forecasting (NU-WRF) regional climate model (RCM) with the three-dimensional (3D) Finite Volume Community Ocean Model (FVCOM) and investigates the impact of coupled dynamics on simulations of the Great Lakes’ winter climate. By integrating 3D lake hydrodynamics, CLIAv1 demonstrates superior performance in …

Aeroponic System Optimization For Butterhead Lettuce Growth And Future Sustainability Using Flow Blurring Atomization: An Overview, Taylor J. Johnson

Beyond: Undergraduate Research Journal

The global population has grown by 6 billion people over the last century and is trending toward 9.7 billion people by the year 2050. Agriculture accounts for 70% of global fresh water usage. Technology must be developed to accommodate the increase of food production demanded by the growing global population and the subsequent increase in water usage. Aeroponic technology is a water-efficient vertical farming technology that can reduce water usage by 90% by suspending plant roots in air within a controlled chamber and supplying atomized droplets of a water-nutrient solution directly to the roots.

This study simultaneously tests six droplet …

Research On Node-Improved Energy Dissipation Wear Model For Fretting Fatigue Prediction In Railway Press-Fit Shaft, Hang Wang, Lijun Zhang, Weijian Zhang, Hongtao Li, Hong Chi, Kai Yang, Jixu Zhou, Li Ai

Civil Engineering Faculty Publications

As a key component of the traveling system of high-speed trains, the axle is crucial for its safe operation. The current research on the fretting wear and fatigue development of shafts suffers from the problems of low local simulation accuracy of the wear model and the lack of detection and validation methods for the dynamic expansion of wear and fatigue. To this end, this study firstly proposes a new node-improved form of energy dissipation wear model, which is more sensitive to the contact behavior of the asperity body in the overfilled region and the energy transfer process; it exhibits wear …

Integrating Recycled Acrylonitrile–Butadiene–Styrene Plastics From Electronic Waste With Carbon Black For Sustainable Asphalt Production, Sepehr Mohammadi, Dongzhao Jin, Zhanping You

Michigan Tech Publications

As the global demand for electronic equipment continues to grow, many devices are being replaced more frequently, resulting in a rapid rise in electronic waste (e-waste), now the fastest growing waste stream worldwide. Motivated by this, the objective of this study is to present an environmentally friendly method to recycle acrylonitrile–butadiene–styrene (ABS), one of the most common e-waste plastics, by using it for asphalt production. In contrast to earlier methods of plastic-modified asphalt production involving complex pretreatments or complimentary additives unsuitable for plant-scale use, this study aims to demonstrate a practical, low-cost solution through the use of carbon black. This …

Ergonomic And Biomechanical Assessment Of Vertical Ladder Climbing For Exoskeleton Integration In Construction Tasks, Ehsan Shourangiz

LSU Master's Theses

Active exoskeletons are increasingly utilized in physically demanding industries such as construction and manufacturing to reduce strain and lower the risk of work-related musculoskeletal disorders, supporting worker safety and long-term health. However, most existing systems are designed for repetitive tasks like lifting or prolonged standing, with limited consideration for dynamic activities such as vertical ladder climbing. Ladder climbing is common and physically demanding in industrial environments, often required to access elevated areas like scaffolding, tanks, or rooftops. Since exoskeletons are intended to remain worn throughout multiple tasks, requiring workers to remove and re-don the device during ladder climbing would reduce …

Stormwater Treatment Practices - Guidance For Maintenance And Targeting Pollutants, Peter T. Weiss

Stormwater Drainage Conference

Stormwater Drainage Conference

Biochar-Based Filtration And Barrier Systems For Urban Stormwater Treatment, Krishna R. Reddy

Stormwater Drainage Conference

Conference that deals a wide range of issues dealing with stormwater drainage. Professor Krishna Reddy of University of Illinois Chicago presented an invited talk titled "Biochar-Based Filtration and Barrier Systems for Urban Stormwater Treatment"

Utilization Of Ftir-Atr For Material Characterization And Forensic Analysis, Helmut Leodarta, Ahmed S. El-Ashwah, Punyaslok Rath, Magdy Abdelrahman, William G. Buttlar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The growing use of chemical modifiers and additives in asphalt mixtures necessitates a reliable system for their identification and quantification, crucial for quality control, assurance, and forensic investigations. Fourier Transform Infrared (FTIR) spectroscopy offers a cost-effective method by analyzing the interaction of infrared light with chemical groups, producing distinct spectral fingerprints. This study evaluates 44 materials, including binders, warm mix additives (WMAs), rejuvenators, release agents, and concrete admixtures. It also assesses the ability of FTIR testing to identify and quantify chemical changes and aging in asphalt binders with rejuvenator addition. An Attenuated Total Reflectance (ATR) accessory was employed for practical …

Mechanical And Deformation Behavior Of Silt Reinforced With Wicking Geotextile: An Experimental Study, Yipeng Guo, Yiyong Xue, Yongjie Zhang, Wei Ruan, Yafeng Li, Xiong Zhang, Zhili Han

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Silt is widely utilized as a filling material in transportation construction, However, it frequently suffers from problems, such as excess pore water pressure buildup, settlement, and mud pumping. Wicking geotextiles have emerged as a sustainable solution by improving both drainage and reinforcement capacities, yet their optimal design parameters remain unclear. To address this gap, a series of tests were performed to investigate the effects of compaction degree, reinforcement configuration (number, spacing, position), and specimen geometry on the mechanical and consolidation of silt reinforced with wicking geotextiles. The results reveal that the failure mechanism of reinforced silt progresses through four distinct …

Technological Schemes For Recycling Used Mineral Oils Carbon-Based Adsorbents Derived From Petroleum Coke, Jaloliddin Sharafiddinovich Bakhtiyorov, Vais Narzullaevich Juraev, Mirzhalol Nuriddinovich Norpulatov

Technical science and innovation

Currently, the demand for mineral oils used in engine vehicles and transformers is increasing year by year worldwide. Additionally, a significant portion of used oils is burned as fuel. At present, the contact method is widely used for oil regeneration with the help of adsorbents such as aluminosilicates, zeolites, silica gels, bleaching clays, and others. The existing industrial reprocessing technologies are of great importance in the recycling of used engine and transformer oils. Furthermore, scientists worldwide are conducting research to create long-lasting carbon-based adsorbents for the regeneration of used engine and transformer mineral oils. In this regard, special attention is …

Reduction-Driven Mobilization Of Structural Fe In Clay Minerals With High Fe Content, Anke Neumann, Luiza Notini, W. A.P.Jeewantha Premaratne, Drew E. Latta, Michelle M. Scherer

Michigan Tech Publications

Clay minerals contain significant amounts of Fe in their alumosilicate framework, and this structural Fe can be reduced and re-oxidized, constituting a potentially renewable source of reduction equivalents in sedimentary environments. However, dissolution and/or clay mineral transformations during microbial Fe reduction contradict this concept. Here, we investigate how Fe reduction and re-oxidation affect the propensity of Fe to be released from the clay mineral structure and use selective sequential extractions in combination with Mössbauer spectroscopy. Negligible amounts of Fe were released in the sequential extraction of high Fe content clay minerals NAu-1 and NAu-2. Once aqueous Fe(II) was added as …

Summary Of: Immersive Modeling Of Water Banking Elicits Local Knowledge And Strategies To Get More Water To Great Salt Lake, Hadia Akbar, David E. Rosenberg

Civil and Environmental Engineering Student Research

Getting more water to the declining Great Salt Lake (GSL) is difficult. Strategies must address complex water rights, competing water needs, differing stakeholder priorities, historical legacies, lack of trust, and more arid and variable hydrology. Here we used immersive online collaborative modeling to explore water banking strategies to get more water to GSL. This 2-page brief describes the immersive modeling method, a Win-Win outcome, key results, new insights collaborators took from a model session, 2 new strategies to deliver water to GSL, and 3 next steps.

Dice Math And Probability, Warren Campbell

SEAS Faculty Publications

The manufacture of dice for tabletop games is a billion-dollar industry. In gaming circles and online forums, the concept of “cursed dice” is a popular topic. Dice are inherently unfair due to the difficulty of manufacturing them with perfect geometric tolerances and uniform material densities. A common method for testing dice fairness is the chi-square statistic, which is typically assumed to follow the chi-square distribution. However, this assumption is only asymptotically valid.

Exact distributions of the statistic can be computed for dice with few sides and a limited number of rolls—such as 2-sided (D2) and 4-sided (D4) dice—but the computational …

Modeling Framework To Quantify And Gauge Project Cost Risks Due To Construction Material Price Volatilities Using Predictive Probabilistic Deep-Learning Algorithms And Stochastic Risk Modeling, Yasser Jezzini, Rayan H. Assaad, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Material price fluctuations pose significant challenges for executing construction projects and adhering to budgetary estimates. Existing research studies focused on forecasting construction material prices rather than quantifying and gauging overall project cost risks related to price volatilities, and they relied on traditional time-series forecasting methods that are incapable of offering full probabilistic distributions of price fluctuations and of providing a comprehensive assessment of risk uncertainties associated with material price fluctuations. This paper addresses these gaps by developing an integrated framework to quantify and gauge project risks due to construction material price volatilities. The framework's validity and practicality were demonstrated using …

Groundwater Flooding On Highways In The Nebraska Sandhills: Applying Remote Sensing, Precipitation And Groundwater Modeling To Determine Depth, Cause And Frequency, Aaron R. Mittelstet

Nebraska Department of Transportation: Research Reports

Climate change significantly impacts infrastructure sustainability, particularly through shifts in precipitation patterns, intensity, and duration. These precipitation dynamics may increase the occurrence of surface water and groundwater flooding. Groundwater in the Nebraska Sand Hills (NSH), including the thickest portions of the High Plains Aquifer, extends close to the land surface in interdunal areas, making the NSH vulnerable to groundwater flooding. Recent events involving heavy precipitation, snow melt, and rising groundwater levels have caused prolonged highway flooding, disrupting transportation networks. This study estimates groundwater flood inundation depth, duration and frequency in the highways of NSH using remote sensing techniques and groundwater …

Ftir Characterization Of Asphalt Sara Fractions In Response To Rubber Modification, Mohyeldin Ragab, Eslam Deef-Allah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt–rubber binders (A-RBs) have a long and deep history of use; however, little is known regarding the interrelated chemical behaviors and miscibility of rubber with the asphalt fractions [saturates, aromatics, resins, and asphaltenes (SARA)]. This study comprehensively attempted to address this knowledge deficiency by employing Fourier transform infrared spectroscopy (FTIR) to investigate the chemical evolution of A-RBs. A-RB interacted at 190 °C and 3000 min⁻¹ for 8 h was deemed to have the optimal rheological performance. FTIR of the liquid fractions of A-RB 190–3000 showed a prominent chemical shift in the SARA fractions, with new peaks that showed rubber …

Characterization Of The Effects Of Waste Mullite Powder On Seawater Sea Sand Cementitious Materials, Xiao Sun, Zehui Zhou, Wenjie He, Yudong Bi, Yao Wang, Hengrui Liu, Rui Zhong, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Maintaining the durability of coastal concrete structures while reducing construction costs remains a formidable challenge. Drawing inspiration from the volcanic concrete used by ancient Greeks and Romans, this study explores the feasibility of using waste mullite powder (WMP) with a high alumina content in seawater sea sand concrete to conserve natural resources and enhance durability. The experimental results demonstrate that the incorporation of seawater and WMP exerts detrimental impacts on the flow characteristics and workability of cementitious composites. While the sulfate content in seawater and sea sand can bolster the early strength of sea sand seawater concrete, sulfate attack compromises …

Geopolymer Clsm With Off-Specification Fly Ash And Bottom Ash: A Sustainable Approach To Hazardous Waste Utilization, Alexis K. Vandomelen, Ahmed A. Gheni, Eslam Gomaa, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Conventional controlled low-strength material (CLSM) is a self-consolidating cementitious material with high flowability and low strength, traditionally composed of cement, sand, and water. This study explores the sustainable utilization of off-specification fly ash (OSFA) and bottom ash (BA), classified as industrial by-products with potential environmental hazards, to develop eco-friendly geopolymer CLSM as an alternative to conventional CLSM. Sodium hydroxide (NaOH) was used as an alkali activator to stabilize and solidify both two-part (liquid NaOH) and one-part (solid NaOH pellets) geopolymer CLSM mixtures. These mixtures were evaluated based on flowability (ASTM D6103-17) and compressive strength (< 300 psi per ACI Committee 229 guidelines for excavatability). A cost analysis was also conducted. The results demonstrated that incorporating OSFA as a cement replacement increased water demand by 15% to meet flowability requirements, while BA substitution for sand led to segregation challenges requiring mixture adjustments. For two-part mixtures, higher carbon content in OSFA necessitated an increased water-to-fly ash ratio. All self-consolidating mixtures exhibited 1-day compressive strengths ranging from 5 psi (0.03 MPa) to 87 psi (0.6 MPa). One-part mixtures showed a 1% to 34% reduction in 7-day compressive strength compared to two-part mixtures, improving excavatability. Increasing the BA-to-OSFA ratio from 1:1 to 3:1 reduced water demand due to lower surface area but increased the NaOH/OSFA ratio. This study highlights the potential of geopolymer CLSM to reduce costs by up to 94% at current NaOH prices (USD 6 per cubic yard) while repurposing hazardous industrial by-products, offering a cost-efficient, sustainable, and environmentally responsible solution for CLSM production.

Retraction: A Database Of Teleseismic Shear-Wave Splitting Measurements For The Ordos Block And Adjacent Areas(Seismological Research Letters (2022), 93, 5, (2731–2739), 10.1785/0220210310), Lin Liu, Stephen S. Gao, Kelly H. Liu, Tu Xue, Yan Jia, Sanzhong Li

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

An earlier version of this article (Liu et al., 2022) included private data from the Himalayan-III program which should not have been made public. The authors acknowledge and regret their negligence during the selection of the measurements. The impacted data represent only 2.7% of the total data published in this article, and after review, the authors and the editors agree that this unintentional error has no bearing on the work's scientific conclusions. Therefore, we are retracting the impacted data and have made corrections to remove any Himalayan-III program data from the article's text, figures, and supplemental tables.

Investigating The Thixotropy Of Fresh Struvite Cement-Based Composite: Insights On Mechanisms Of The Pastes’ Thixotropic Behavior, Ugochukwu Ewuzie, Abdulkareem O. Yusuf, Damilola Daramola, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Struvite (ST) recovered during wastewater treatment has been sparsely applied in cement-based composites. This study systematically evaluated the thixotropic behavior of cement-struvite (CST) pastes, a mix of 5–20 % ST by mass of cement, and proposed the interaction mechanisms leading to the pastes' thixotropy. The hysteresis loop area was used to establish the pastes' thixotropy and investigate its relationship with increased ST content, temperature, and yield stress. In the thixotropic behavior model used, the equilibrium shear stress was employed to examine the CST pastes' irreversible change; the characteristic time of deflocculation was used to study the flocs destruction process; and …

Performance Characterization And Mechanistic Study Of Dry Process Wr/Sbs Composite Modified Asphalt Mixture, Hongfu Liu, Xiangyang Ren, Wenwen Ge, Zhengwei Yi, Dongzhao Jin, Xinghai Peng, Songtao Lv

Michigan Tech Publications

The dry process modification is characterized by simplicity, flexibility, low energy consumption, and low pollution, making it an ideal choice in pavement repair engineering. This study aims to optimize the use of waste rubber powder and SBS modifiers in dry process composite modification by preparing dry process WR/SBS composite modified particles (WR/SBS CMP) using a twin-screw extruder. The optimum mixing content of modified particles was determined through comparative analysis of pavement performance of dry process WR/SBS composite modified, wet-process SBS-modified, and matrix asphalt mixtures. The rheological properties and modification mechanism of the asphalt binder extracted from these mixtures were tested …

Balancing Infrastructure Demands: Analysis Of Materials Pricing And Supply, Bethany Paris, Ying Li, Steve Waddle, Bryan Gibson

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) lets around 700 contracts year valued at over $1 billion. One of KYTC’s foremost goals is to deliver projects on time and on budget. However, over the past five years achieving these twin goals has grown in difficulty due to material shortages, widespread inflation, supply chain disruptions, and the tight labor market triggered by the COVID-19 pandemic. Although material shortages have abated and supply chain disruptions have eased, instability is seemingly a permanent feature of the national and global economies. As such, Cabinet decision makers need reliable tools that can be used to understand historical …

Enhanced Pavement Project Prioritization, Bryan Gibson, Jon Wilcoxson, Gayle Marks

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) is responsible for inspecting, maintaining, and improving 27,000 centerline miles of pavement. Given the vastness of the state’s transportation network, KYTC needs a robust method for prioritizing pavement preservation projects. The Cabinet has relied on pavement condition ratings, data collected using Laser Crack Measurement Systems, and input from district-level staff to prioritize these types of projects. But this approach overlooks information that should be considered, such as factors related to safety, mobility, and geographic context. To resolve these shortcomings, Kentucky Transportation Center (KTC) researchers worked with KYTC subject-matter experts to develop the Enhanced Pavement Prioritization …

Data-Driven Prediction Of Binder Rheological Performance In Rap/Ras-Containing Asphalt Mixtures, Eslam Deef-Allah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt recycling technologies have advanced considerably over the last few decades with the utilization of reclaimed asphalt pavements (RAP) and recycled asphalt shingles (RAS). Characterizing aged and heterogeneous binders in these mixtures is challenging, particularly with limited extracted binders. This study suggests a data-driven framework that considers the rheological, chemical, and thermal characteristics to predict the binders' performance. Ninety-seven mixtures with 0–35% of the asphalt binder replaced with RAP/RAS binders were included as cores from the field, plant-produced mixtures, and laboratory-fabricated mixtures. The binders were chemically quantified using aging, aromatic, and aliphatic indices. Thermal analyses of the binders involved the …

Stabilizing Embankments Using Geosynthetic Reinforcement, Daryl Greer, Charlie Sun

Kentucky Transportation Center Research Report

Reinforced soil slopes (RSSs) can be a feasible solution for embankments where there exist right of way re-strictions, environmental issues, rolling or mountainous topography, unfavorable geology, and other limiting fac-tors. They can be an alternative to retaining walls or importing select fills to construct steeper, stable embankment slopes where flatter embankment slopes may result in unwanted impacts, costs, and maintenance issues. Thisreport discusses the advantages and limitations of using geosynthetic reinforcement to construct RSSs. Researchers investigated current design, specification, and construction practices to determine which practices can be adopted by the Kentucky Transportation Cabinet (KYTC). Specifications were developed for using …

Investing Hysteresis In Floodplain Dynamics Of Lakes In The Middle St. Johns River Using Sentinel-1 Sar Imagery, Keenan Hubbard

Doctoral Dissertations and Master's Theses

Floodplain dynamics are often complex, with hysteresis potentially affecting the temporal relationship between flood stage and flood extent during subsequent inundation phases. This study leverages Sentinel-1 synthetic aperture radar (SAR) imagery to map flood extent in the Middle St. Johns River Lake floodplains and examine the presence of hysteresis during flood events. SAR scenes corresponding to river gauge readings were analyzed from the rising and falling limbs of a flood hydrograph. By comparing these flood maps, we assess differences in inundated areas at equivalent water levels during each stage of the flood event. The findings aim to enhance flood monitoring …

Effect Of Vehicular Electrification On Transportation Emissions In Florida, Shreya Sapkota Dhakal

Doctoral Dissertations and Master's Theses

Vehicular emissions from fuel-based passenger cars emit an array of gases and particles that are detrimental for human health and the environment. In that regard, electric vehicles (EVs) present a viable, sustainable solution. This study investigated the impact of electrification of passenger cars on air quality in Florida, in five major urban counties namely Miami-Dade, Duval, Hillsborough, Orange, and Leon. Between 2018 and 2022, these counties experienced a significant increase of 219.50 ± 52.32% in EV adoption, coupled with a 11.55 ± 6.13% decrease in fuel-based vehicle usage. Herein, we characterize five pollutants primarily generated from fuel-based passenger vehicles- carbon …